Followup to #5282, fixes#5272 in its totality.
This follows the same pattern as the injector/sp-validator webhooks, leveraging `FsCredsWatcher` to watch for changes in the cert files.
To reuse code from the webhooks, we moved `updateCert()` to `creds_watcher.go`, and `run()` as well (which now is called `ProcessEvents()`).
The `TestNewAPIServer` test in `apiserver_test.go` was removed as it really was just testing two things: (1) that `apiServerAuth` doesn't error which is already covered in the following test, and (2) that the golib call `net.Listen("tcp", addr)` doesn't error, which we're not interested in testing here.
## How to test
To test that the injector/sp-validator functionality is still correct, you can refer to #5282
The steps below are similar, but focused towards the tap component:
```bash
# Create some root cert
$ step certificate create linkerd-tap.linkerd.svc ca.crt ca.key --profile root-ca --no-password --insecure
# configure tap's caBundle to be that root cert
$ cat > linkerd-overrides.yml << EOF
tap:
externalSecret: true
caBundle: |
< ca.crt contents>
EOF
# Install linkerd
$ bin/linkerd install --config linkerd-overrides.yml | k apply -f -
# Generate an intermediatery cert with short lifespan
$ step certificate create linkerd-tap.linkerd.svc ca-int.crt ca-int.key --ca ca.crt --ca-key ca.key --profile intermediate-ca --not-after 4m --no-password --insecure --san linkerd-tap.linkerd.svc
# Create the secret using that intermediate cert
$ kubectl create secret tls \
linkerd-tap-k8s-tls \
--cert=ca-int.crt \
--key=ca-int.key \
--namespace=linkerd
# Rollout the tap pod for it to pick the new secret
$ k -n linkerd rollout restart deploy/linkerd-tap
# Tap should work
$ bin/linkerd tap -n linkerd deploy/linkerd-web
req id=0:0 proxy=in src=10.42.0.15:33040 dst=10.42.0.11:9994 tls=true :method=GET :authority=10.42.0.11:9994 :path=/metrics
rsp id=0:0 proxy=in src=10.42.0.15:33040 dst=10.42.0.11:9994 tls=true :status=200 latency=1779µs
end id=0:0 proxy=in src=10.42.0.15:33040 dst=10.42.0.11:9994 tls=true duration=65µs response-length=1709B
# Wait 5 minutes and rollout tap again
$ k -n linkerd rollout restart deploy/linkerd-tap
# You'll see in the logs that the cert expired:
$ k -n linkerd logs -f deploy/linkerd-tap tap
2020/12/15 16:03:41 http: TLS handshake error from 127.0.0.1:45866: remote error: tls: bad certificate
2020/12/15 16:03:41 http: TLS handshake error from 127.0.0.1:45870: remote error: tls: bad certificate
# Recreate the secret
$ step certificate create linkerd-tap.linkerd.svc ca-int.crt ca-int.key --ca ca.crt --ca-key ca.key --profile intermediate-ca --not-after 4m --no-password --insecure --san linkerd-tap.linkerd.svc
$ k -n linkerd delete secret linkerd-tap-k8s-tls
$ kubectl create secret tls \
linkerd-tap-k8s-tls \
--cert=ca-int.crt \
--key=ca-int.key \
--namespace=linkerd
# Wait a few moments and you'll see the certs got reloaded and tap is working again
time="2020-12-15T16:03:42Z" level=info msg="Updated certificate" addr=":8089" component=apiserver
```
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
Fixes#4191#4993
This bumps Kubernetes client-go to the latest v0.19.2 (We had to switch directly to 1.19 because of this issue). Bumping to v0.19.2 required upgrading to smi-sdk-go v0.4.1. This also depends on linkerd/stern#5
This consists of the following changes:
- Fix ./bin/update-codegen.sh by adding the template path to the gen commands, as it is needed after we moved to GOMOD.
- Bump all k8s related dependencies to v0.19.2
- Generate CRD types, client code using the latest k8s.io/code-generator
- Use context.Context as the first argument, in all code paths that touch the k8s client-go interface
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
This PR introduces a service mirroring component that is responsible for watching remote clusters and mirroring their services locally.
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
* Fixed bad identity string for target pod in tap
Fixes#3506
Was using the cluster domain instead of the trust domain, which results
in an error when those domains differ.
* If tap source IP matches many running pods then only show the IP
When an unmeshed source ip matched more than one running pod, tap was
showing the names for all those pods, even though the didn't necessary
originate the connection. This could be reproduced when using pod
network add-on such as Calico.
With this change, if a node matches, return it, otherwise we proceed to look for a matching pod. If exactly one running pod matches we return it. Otherwise we return just the IP.
Fixes#3103
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
The controller Docker image included 7 Go binaries (destination,
heartbeat, identity, proxy-injector, public-api, sp-validator, tap),
each roughly 35MB, with similar dependencies.
Change each controller binary into subcommands of a single `controller`
binary, decreasing the controller Docker image size from 315MB to 38MB.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Set custom cluster domain in GetServiceProfileFor
* Set custom cluster domain in tap server
Move fetching cluster domain for tap server to cmd main
* Handle fetchting cluster domain errors separately
* Use custom cluster domain for traffic split adaptor
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
### Summary
As an initial attempt to secure the connection from clients to the gRPC tap
server on the tap Pod, the tap `addr` only listened on localhost.
As @adleong pointed out #3257, this was not actually secure because the inbound
proxy would establish a connection to localhost anyways.
This change removes the gRPC tap server listener and changes `TapByResource`
requests to interface with the server object directly.
From this, we know that all `TapByResourceRequests` have gone through the tap
APIServer and thus authorized by RBAC.
### Details
[NewAPIServer](ef90e0184f/controller/tap/apiserver.go (L25-L26)) now takes a [GRPCTapServer](f6362dfa80/controller/tap/server.go (L33-L34)) instead of a `pb.TapClient` so that
`TapByResource` requests can interact directly with the [TapByResource](f6362dfa80/controller/tap/server.go (L49-L50)) method.
`GRPCTapServer.TapByResource` now makes a private [grpcTapServer](ef90e0184f/controller/tap/handlers.go (L373-L374)) that satisfies
the [tap.TapServer](https://godoc.org/github.com/linkerd/linkerd2/controller/gen/controller/tap#TapServer) interface. Because this interface is satisfied, we can interact
with the tap server methods without spawning an additional listener.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2349 removed the `--single-namespace` flag, in favor of
runtime detection of cluster vs. namespace access, and also
ServiceProfile availability. This maintained control-plane support for
running in these two states.
This change requires control-plane components have cluster-wide
Kubernetes API access and ServiceProfile availability, and will error
out if not. Once #2349 merges, stage 1 install will be a requirement for
a successful stage 2 install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
Updates to the Kubernetes utility code in `/controller/k8s` to support interacting with ServiceProfiles.
This makes use of the code generated client added in #1752
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add --single-namespace install flag for restricted permissions
* Better formatting in install template
* Mark --single-namespace and --proxy-auto-inject as experimental
* Fix wording of --single-namespace check flag
* Small healthcheck refactor
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, we would tap any resource's pods, regardless of whether the pods
were meshed or not. We can't actually tap non-meshed pods, so I'm adding a check
that will filter out non-meshed pods from the pods that tap watches.
Previous behaviour:
When attempting to hang a non meshed pod, it would establish
a watch on the pods, but then never return any results. In the CLI you could
just cancel it with Ctrl-C. In the web, clicking Stop would send a
WebSocket.close(1000) but wouldn't actually close the connection...
Behaviour after change :
If no pods under the specified resource are meshed, it'll
return an error of no pods being found to tap
The `TapEvent` protobuf contains two maps, `DestinationMeta` and
`SourceMeta`. The `DestinationMeta` contains all the metadata provided
by the proxy that originated the event (ultimately originating from the
Destination service), while the `SourceMeta` currently only contains the
source connection's TLS status.
This branch modifies the Tap server to hydrate the same set of metadata
from the source IP address, when the source was within the cluster. It
does this by adding an indexer of pod IPs to pods to its k8s API client,
and looking up IPs against this index. If a pod was found, the extra
metadata is added to the tap event sent to the client.
This branch also changes the client so that if a source pod name was
provided in the metadata, it prints the pod name rather than the IP
address for the `src` field in its output. This mimics what is currently
done for the `dst` field in tap output. Furthermore, the added source
metadata will be necessary for adding src resource types to tap output
(see issue #1170).
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The `conduit tap` command is now deprecated.
Replace `conduit tap` with `connduit tapByResource`. Rename tapByResource
to tap. The underlying protobuf for tap remains, the tap gRPC endpoint now
returns Unimplemented.
Fixes#804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The TapByResource endpoint was previously a stub.
Implement end-to-end tapByResource functionality, with support for
specifying any kubernetes resource(s) as target and destination.
Fixes#803, #49
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Most controller listeners should only bind on localhost
* Use default listening addresses in controller components
* Review feedback
* Revert test_helper change
* Revert use of absolute domains
Signed-off-by: Alex Leong <alex@buoyant.io>
* Set conduit version to match conduit docker tags
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove --skip-inbound-ports for emojivoto
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename git_sha => git_sha_head
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Switch to using the go linker for setting the version
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Log conduit version when go servers start
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Cleanup conduit script
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add --short flag to head sha command
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Set CONDUIT_VERSION in docker-compose env
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Sort imports
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Upgrade k8s.io/client-go to v6.0.0
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Make k8s store initialization blocking with timeout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
We’ve built Conduit from the ground up to be the fastest, lightest,
simplest, and most secure service mesh in the world. It features an
incredibly fast and safe data plane written in Rust, a simple yet
powerful control plane written in Go, and a design that’s focused on
performance, security, and usability. Most importantly, Conduit
incorporates the many lessons we’ve learned from over 18 months of
production service mesh experience with Linkerd.
This repository contains a few tightly-related components:
- `proxy` -- an HTTP/2 proxy written in Rust;
- `controller` -- a control plane written in Go with gRPC;
- `web` -- a UI written in React, served by Go.
Alejandro Pedraza
Tarun Pothulapati
Zahari Dichev
Sergio C. Arteaga
Alex Leong
Andrew Seigner
arminbuerkle
Kevin Leimkuhler
Dennis Adjei-Baah
Andrew Seigner
Ivan Sim
zak
Kevin Lingerfelt
Risha Mars
Eliza Weisman
Oliver Gould
Alena Varkockova