Now that tracing has been split out of the main control plane and into the linkerd-jaeger extension, we remove references to tracing from the main control plane including:
* removing the tracing components from the main control plane chart
* removing the tracing injection logic from the main proxy injector and inject CLI (these will be added back into the new injector in the linkerd-jaeger extension)
* removing tracing related checks (these will be added back into `linkerd jaeger check`)
* removing related tests
We also update the `--control-plane-tracing` flag to configure the control plane components to send traces to the linkerd-jaeger extension. To make sure this works even when the linkerd-jaeger extension is installed in a non-default namespace, we also add a `--control-plane-tracing-namespace` flag which can be used to change the namespace that the control plane components send traces to.
Note that for now, only the control plane components send traces; the proxies in the control plane do not. This is because the linkerd-jaeger injector is not yet available. However, this change adds the appropriate namespace annotations to the control plane namespace to configure the proxies to send traces to the linkerd-jaeger extension once the linkerd-jaeger injector is available.
I tested this by doing the following:
1. bin/linkerd install | kubectl apply -f -
1. bin/helm install jaeger jaeger/charts/jaeger
1. bin/linkerd upgrade --control-plane-tracing=true | kubectl apply -f -
1. kubectl -n linkerd-jaeger port-forward svc/jaeger 16686
1. open http://localhost:16686
1. see traces from the linkerd control plane
Signed-off-by: Alex Leong <alex@buoyant.io>
CLI crashes if linkerd-config contains unexpected values.
Add a safe accessor that initializes an empty Global on the first
access. Refactor all accesses to use the newly introduced accessor using
gopls.
Add test for linkerd-config data without Global.
Fixes#5215
Co-authored-by: Itai Schwartz <yitai27@gmail.com>
Signed-off-by: Hod Bin Noon <bin.noon.hod@gmail.com>
* cli: add `--ingress` flag to inject cmd
This PR adds a new inject flag called `--ingress` which when enabled
adds a new annotation i.e `linkerd.io/inject: ingress`.
This annotation is not applied in the `--manual` case and the env
variable is directly set.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
This is a major refactor of the install/upgrade code which removes the config protobuf and replaces it with a config overrides secret which stores overrides to the values struct. Further background on this change can be found here: https://github.com/linkerd/linkerd2/discussions/4966
Note: as-is this PR breaks injection. There is work to move injection onto a Values-based config which must land before this can be merged.
A summary of the high level changes:
* the install, global, and proxy fields of linkerd-config ConfigMap are no longer populated
* the CLI install flow now follows these simple steps:
* load default Values from the chart
* update the Values based on the provided CLI flags
* render the chart with these values
* also render a Secret/linkerd-config-overrides which describes the values which have been changed from their defaults
* the CLI upgrade flow now follows these simple stesp:
* load the default Values from the chart
* if Secret/linkerd-config-overrides exists, apply the overrides onto the values
* otherwise load the legacy ConfigMap/linkerd-config and use it to updates the values
* further update the values based on the provided CLI flags
* render the chart and the Secret/linkerd-config-overrides as above
* Helm install and upgrade is unchanged
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
## Motivation
Closes#4950
## Solution
Add the `config.linkerd.io/opaque-ports` annotation to either a namespace or pod
spec to set the proxy `LINKERD2_PROXY_INBOUND_PORTS_DISABLE_PROTOCOL_DETECTION`
environment variable.
Currently this environment variable is not used by the proxy, but will be
addressed by #4938.
## Valid values
Ports: `config.linkerd.io/opaque-ports: 4322,3306`
Port ranges: `config.linkerd.io/opaque-ports: 4320-4325`
Mixed ports and port ranges: `config.linkerd.io/opaque-ports: 4320-4325`
If the pod has named ports such as:
```
- name: nginx
image: nginx:latest
ports:
- name: nginx-port
containerPort: 80
protocol: TCP
```
The name can also be used as a value: `config.linkerd.io/opaque-ports:
nginx-port`
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Some installations upgrading from versions prior to 2.7.x may have missing debug image name and version. This fix ensures that the default values are in place for this scenario and additionally upgrades the version of debug image with the control plane version.
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
* Update inject to error out on failure
Update injection process to throw an error when the reason for failure is due to sidecar, udp, automountServiceAccountToken or hostNetwork
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Handle automountServiceAccountToken
Return error during inject if pod spec has `automountServiceAccountToken: false`
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Upgrade golangci-lint to v1.23.8
This should help with some timeouts we're seeing in CI.
I fixed some new warnings found in `inject.go` and `uninject.go`.
Also we now have to explicitly disable linting `/controller/gen`.
The linter was also complaining that in `/pkg/k8s/fake.go` the
`spClient.Interface` and `tsclient.Interface` returned in the function
`newFakeClientSetsFromManifests()` aren't used, but I opted to ignore
that to leave them available for future tests.
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
Fixes https://github.com/linkerd/linkerd2/issues/3878
If the `--registry` flag is provided to Linkerd without the `--proxy-image` or `--init-image` flags, the `--registry` flag is ignored and not applied to the existing values for the proxy or init images pulled from the configmap.
We now override the registry with the value from the `--registry` flag regardless of which other flags are provided.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Inject preStop hook into the proxy sidecar container to stop it last
This commit adds support for a Graceful Shutdown technique that is used
by some Kubernetes administrators while the more perspective
configuration is being discussed in
https://github.com/kubernetes/kubernetes/issues/65502
The problem is that RollingUpdate strategy does not guarantee that all
traffic will be sent to a new pod _before_ the previous pod is removed.
Kubernetes inside is an event-driven system and when a pod is being
terminating, several processes can receive the event simultaneously.
And if an Ingress Controller gets the event too late or processes it
slower than Kubernetes removes the pod from its Service, users requests
will continue flowing into the black whole.
According [to the documentation](https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods)
> 1. If one of the Pod’s containers has defined a `preStop` hook,
> it is invoked inside of the container. If the `preStop` hook is still
> running after the grace period expires, step 2 is then invoked with
> a small (2 second) extended grace period.
>
> 2. The container is sent the `TERM` signal. Note that not all
> containers in the Pod will receive the `TERM` signal at the same time
> and may each require a preStop hook if the order in which
> they shut down matters.
This commit adds support for the `preStop` hook that can be configured
in three forms:
1. As command line argument `--wait-before-exit-seconds` for
`linkerd inject` command.
2. As `linkerd2` Helm chart value `Proxy.WaitBeforeExitSeconds`.
2. As `config.alpha.linkerd.io/wait-before-exit-seconds` annotation.
If configured, it will add the following preHook to the proxy container
definition:
```yaml
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep {{.Values.Proxy.WaitBeforeExitSeconds}}
```
To achieve max benefit from the option, the main container should have
its own `preStop` hook with the `sleep` command inside which has
a smaller period than is set for the proxy sidecar. And none of them
must be bigger than `terminationGracePeriodSeconds` configured for the
entire pod.
An example of a rendered Kubernetes resource where
`.Values.Proxy.WaitBeforeExitSeconds` is equal to `40`:
```yaml
# application container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 20
# linkerd-proxy container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 40
terminationGracePeriodSeconds: 160 # for entire pod
```
Fixes#3747
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
* rework annotations doc generation from godoc parsing to map[string]string and get rid of unused yaml tags
* move annotations doc function from pkg/k8s to cli/cmd
Signed-off-by: StupidScience <tonysignal@gmail.com>
* Add cmd to inject debug sidecar for l5d components only
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Revert "Add cmd to inject debug sidecar for l5d components only"
This reverts commit 50b8b3577e.
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Stop uninjecting metadata from control plane components
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Ensure inject can be run on control plane components only if --manual is present
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Add inject support for namespaces(Fix#3255)
* Add relevant unit tests (including overridden annotations)
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This commit refactors the changes introduced by #2842 where the debug
container spec is created in the 'cli' and 'pkg' packages. This change
follows the existing pattern of annotating the YAML in the CLI code,
and injecting the sidecar spec in the shared library.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2720 and 2711
This changes the default behavior of `linkerd inject` to not inject the
proxy but just the `linkerd.io/inject: enabled` annotation for the
auto-injector to pick it up (regardless of any namespace annotation).
A new `--manual` mode was added, which behaves as before, injecting
the proxy in the command output.
The unit tests are running with `--manual` to avoid any changes in the
fixtures.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add config.linkerd.io/disable-identity annotation
First part of #2540
We'll tackle support for `--disable-identity` in `linkerd install` in a
separate commit.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
92f15e78a9 incorrectly removed the config
version override when patching a config from options, which caused
upgrade to stop updating the config version.
Fixes#2660
* Define proxy version override annotation
* Don't override global linkerd version during inject
This ensures consistent usages of the config.linkerd.io/linkerd-version and
linkerd.io/proxy-version annotations. The former will only be used to track
overridden version, while the latter shows the cluster's current default
version.
* Rename proxy version config override annotation
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
When installing Linkerd, a user may override default settings, or may
explicitly configure defaults. Consider install options like `--ha
--controller-replicas=4` -- the `--ha` flag sets a new default value for
the controller-replicas, and then we override it.
When we later upgrade this cluster, how can we know how to configure the
cluster?
We could store EnableHA and ControllerReplicas configurations in the
config, but what if, in a later upgrade, the default value changes? How
can we know whether the user specified an override or just used the
default?
To solve this, we add an `Install` message into a new config.
This message includes (at least) the CLI flags used to invoke
install.
upgrade does not specify defaults for install/proxy-options fields and,
instead, uses the persisted install flags to populate default values,
before applying overrides from the upgrade invocation.
This change breaks the protobuf compatibility by altering the
`installation_uuid` field introduced in 9c442f6885.
Because this change was not yet released (even in an edge release), we
feel that it is safe to break.
Fixes https://github.com/linkerd/linkerd2/issues/2574
Performing this check earlier helps to separate the specialized logic to the CLI
and webhook.
Any subsequent modification of this check logic to support config override of
existing meshed workload will be confined to the relevant component.
The shared lib can then focus only on config overrides.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Include the DisableExternalProfile option even if it's 'false'. The override logic depends on this option to assign different profile suffix.
* Check for proxy and init image overrides even when registry option is empty
* Append the config annotations to the pod's meta before creating the patch. This ensures that any configs provided via the CLI options are persisted as annotations before the configs override.
* Persist linkerd version CLI option
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
Manual and auto injection was logging the full patch JSON at the `Info`
level.
Modify injection to log the object type and name at the `Info` level,
and the full patch at the `Debug` level.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Changed the protobuf definition to take out destinationApiPort entirely
* Store destinationAPIPort as a constant in pkg/inject.go
Fixes#2351
Signed-off-by: Aditya Sharma <hello@adi.run>
Alex Leong
hodbn
Tarun Pothulapati
Kevin Leimkuhler
Paul Balogh
Naseem
Mayank Shah
Zahari Dichev
Alejandro Pedraza
Eugene Glotov
StupidScience
陈谭军
Ivan Sim
Alejandro Pedraza
Dennis Adjei-Baah
Oliver Gould
Andrew Seigner
Aditya Sharma