Now that tracing has been split out of the main control plane and into the linkerd-jaeger extension, we remove references to tracing from the main control plane including:
* removing the tracing components from the main control plane chart
* removing the tracing injection logic from the main proxy injector and inject CLI (these will be added back into the new injector in the linkerd-jaeger extension)
* removing tracing related checks (these will be added back into `linkerd jaeger check`)
* removing related tests
We also update the `--control-plane-tracing` flag to configure the control plane components to send traces to the linkerd-jaeger extension. To make sure this works even when the linkerd-jaeger extension is installed in a non-default namespace, we also add a `--control-plane-tracing-namespace` flag which can be used to change the namespace that the control plane components send traces to.
Note that for now, only the control plane components send traces; the proxies in the control plane do not. This is because the linkerd-jaeger injector is not yet available. However, this change adds the appropriate namespace annotations to the control plane namespace to configure the proxies to send traces to the linkerd-jaeger extension once the linkerd-jaeger injector is available.
I tested this by doing the following:
1. bin/linkerd install | kubectl apply -f -
1. bin/helm install jaeger jaeger/charts/jaeger
1. bin/linkerd upgrade --control-plane-tracing=true | kubectl apply -f -
1. kubectl -n linkerd-jaeger port-forward svc/jaeger 16686
1. open http://localhost:16686
1. see traces from the linkerd control plane
Signed-off-by: Alex Leong <alex@buoyant.io>
This is a major refactor of the install/upgrade code which removes the config protobuf and replaces it with a config overrides secret which stores overrides to the values struct. Further background on this change can be found here: https://github.com/linkerd/linkerd2/discussions/4966
Note: as-is this PR breaks injection. There is work to move injection onto a Values-based config which must land before this can be merged.
A summary of the high level changes:
* the install, global, and proxy fields of linkerd-config ConfigMap are no longer populated
* the CLI install flow now follows these simple steps:
* load default Values from the chart
* update the Values based on the provided CLI flags
* render the chart with these values
* also render a Secret/linkerd-config-overrides which describes the values which have been changed from their defaults
* the CLI upgrade flow now follows these simple stesp:
* load the default Values from the chart
* if Secret/linkerd-config-overrides exists, apply the overrides onto the values
* otherwise load the legacy ConfigMap/linkerd-config and use it to updates the values
* further update the values based on the provided CLI flags
* render the chart and the Secret/linkerd-config-overrides as above
* Helm install and upgrade is unchanged
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
Fixes#4191#4993
This bumps Kubernetes client-go to the latest v0.19.2 (We had to switch directly to 1.19 because of this issue). Bumping to v0.19.2 required upgrading to smi-sdk-go v0.4.1. This also depends on linkerd/stern#5
This consists of the following changes:
- Fix ./bin/update-codegen.sh by adding the template path to the gen commands, as it is needed after we moved to GOMOD.
- Bump all k8s related dependencies to v0.19.2
- Generate CRD types, client code using the latest k8s.io/code-generator
- Use context.Context as the first argument, in all code paths that touch the k8s client-go interface
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
This PR corrects misspellings identified by the [check-spelling action](https://github.com/marketplace/actions/check-spelling).
The misspellings have been reported at aaf440489e (commitcomment-41423663)
The action reports that the changes in this PR would make it happy: 5b82c6c5ca
Note: this PR does not include the action. If you're interested in running a spell check on every PR and push, that can be offered separately.
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
This moves Prometheus as a add-on, thus making it optional but enabled by default. The also make `linkerd-prometheus` more configurable, and allow it to have its own life-cycle for upgrades, configuration, etc.
This work will be followed by documentation that help users configure existing Prometheus to work with Linkerd.
**Changes Include:**
- moving prometheus manifests into a separate chart at `charts/add-ons/prometheus`, and adding it as a dependency to `linkerd2`
- implement the `addOn` interface to support the same with CLI.
- include configuration in `linkerd-config-addons`
**User Facing Changes:**
The default install experience does not change much but for users who have already configured Prometheus differently, would need to apply the same using the new configuration fields present in chart README
* Moves Common templates needed to partials
As add-ons re-use the partials helm chart, all the templates needed by multiple charts should be present in partials
This commit also updates the helm tests
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* add tracing add-on helm chart
Tracing sub-chart includes open-census and jaeger components as a sub-chart which can be enabled as needed
* Updated Install path to also install add-ons
This includes new interface for add-ons to implement, with example tracing implementation
* Updates Linkerd install path to also install add-ons
Changes include:
- Adds an optional Linkerd Values configmap which stores add-on configuration when add-ons are present.
- Updates Linkerd install path to check for add-ons and render their sub-charts.
- Adds a install Option called config, which is used to pass confiugration for add-ons.
- Uses a fork of mergo, to over-write default Values with the Values struct generated from config.
* Updates the upgrade path about add-ons.
Upgrade path now checks for the linkerd-values cm, and overwrites the default values with it, if present.
It then checks the config option, for any further overwrites
* Refactor linkerd-values and re-update tests
also adds relevant nil checks
* Refactor code to fix linting issues
* Fixes an error with linkerd-config global values
Also refactors the linkerd-values cm to work the same with helm
* Fix a nil pointer issue for tests
* Updated Tracing add-on chart meta-data
Also introduced a defaultGetFiles method for add-ons
* Add add-on/charts to gitignore
* refactor gitignore for chart deps
* Moves sub-charts to /charts directly
* Refactor linkerd values cm
* Add comment in linkerd-values
* remove extra controlplanetracing flag
* Support Stages deployment for add-ons along with tests
* linting fix
* update tracing rbac
* Removes the need for add-on Interface
- Uses helm loading capabiltiies to get info about add-ons
- Uses reflection to not have to unnecessarily add checks for each add-on type
* disable tracing flag
* Remove dep on forked mergo
- Re-use merge from helm
* Re-use helm's merge
* Override the chartDir path during tests
* add error check
* Updated the dependency iteration code
Currently, the charts directory, will not have the deps in the repo. So, Code is updated to read the dependencies from requirements.yaml
and use that info to read templates from the relevant add-ons directory.
* Hard Code add-ons name
* Remove struct details for add-ons
- As we don't use fields of a add-on struct, we don't have them to be typed. Instead we can just use the `enabled` flag using reflection
- Users can just use map[string]interface{} as the add-on type.
* update unit tests
* linting fix
* Rename flag to addon-config
* Use Chart loading logic
- This code uses chart loading to read the files and keep in a vfs.
- Once we have those files read we will then use them for generation of sub-charts.
* Go fmt fix
* Update the linkerd-values cm to use second level field
* Add relevant unit tests for mergeRaw
* linting fix
* Move addon tests to a new file
* Fix golden files
* remove addon install unit test
* Refactor sub-chart load logic
* Add install tracing unit test
* golden file update for tracing install
* Update golden files to reflect another pr changes
* Move addon-config flag to recordFlagSet
* add relevant tracing enabled checks
* linting fix
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Alex Leong
Tarun Pothulapati
Josh Soref