There is no longer a proxy config `DESTINATION_GET_NETWORKS`. Instead of
reflecting this implementation in our values.yaml, this changes this
variable to the more general `clusterNetworks` to emphasize its
similarity to `clusterDomain` for the purposes of discovery.
The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
As described in #5105, it's not currently possible to set the proxy log
level to `off`. The proxy injector's template does not quote the log
level value, and so the `off` value is handled as `false`. Thanks, YAML.
This change updates the proxy template to use helm's `quote` function
throughout, replacing manually quoted values and fixing the quoting for
the log level value.
We also remove the default logFormat value, as the default is specified
in values.yaml.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
The proxy has a default, hardcoded set of ports on which it doesn't do
protocol detection (25, 587, 3306 -- all of which are server-first
protocols). In a recent change, this default set was removed from
the outbound proxy, since there was no way to configure it to anything
other than the default set. I had thought that there was a default set
applied to proxy-init, but this appears to not be the case.
This change adds these ports to the default Helm values to restore the
prior behavior.
I have also elected to include 443 in this set, as it is generally our
recommendation to avoid proxying HTTPS traffic, since the proxy provides
very little value on these connections today.
Additionally, the memcached port 11211 is skipped by default, as clients
do not issue any sort of preamble that is immediately detectable.
These defaults may change in the future, but seem like good choices for
the 2.9 release.
This is a major refactor of the install/upgrade code which removes the config protobuf and replaces it with a config overrides secret which stores overrides to the values struct. Further background on this change can be found here: https://github.com/linkerd/linkerd2/discussions/4966
Note: as-is this PR breaks injection. There is work to move injection onto a Values-based config which must land before this can be merged.
A summary of the high level changes:
* the install, global, and proxy fields of linkerd-config ConfigMap are no longer populated
* the CLI install flow now follows these simple steps:
* load default Values from the chart
* update the Values based on the provided CLI flags
* render the chart with these values
* also render a Secret/linkerd-config-overrides which describes the values which have been changed from their defaults
* the CLI upgrade flow now follows these simple stesp:
* load the default Values from the chart
* if Secret/linkerd-config-overrides exists, apply the overrides onto the values
* otherwise load the legacy ConfigMap/linkerd-config and use it to updates the values
* further update the values based on the provided CLI flags
* render the chart and the Secret/linkerd-config-overrides as above
* Helm install and upgrade is unchanged
Signed-off-by: Alex Leong <alex@buoyant.io>
PR https://github.com/linkerd/linkerd2/pull/5027 added `podLabels` and `podAnnotations` to `values.yaml` to allow setting labels and annotations on pods in the Helm template. However, these fields were not added to the `Values` struct in `Values.go`. This means that these fields were not serialized out to the `linkerd-config` or to the `linkerd-config-overrides`. Furthermore, in PR #5005 which moves to using the `Values` struct more authoritatively, the `podLabels` and `podAnnotations` fields would not take effect at all.
Add these fields to the `Values` struct and update all test fixtures accordingly.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
Fixes#5008
We add a `values` file to the `ConfigMap/linkerd-config` resource. This file holds the full Values which were used to render the chart except that private data such as the identity issuer key are redacted. This file is currently unused but will eventually be used by CLI commands such as `check` and `inject` which need to load Linkerd's configuration (as described in #5009).
This is one step in a larger effort to eventually get rid of the other files in `ConfigMap/linkerd-config`.
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR adds a new secret to the output of `linkerd install` called `linkerd-config-overrides`. This is the first step towards simplifying the configuration of the linkerd install and upgrade flow through the CLI. This secret contains the subset of the values.yaml which have been overridden. In other words, the subset of values which differ from their default values. The idea is that this will give us a simpler way to produce the `linkerd upgrade` output while still persisting options set during install. This will eventually replace the `linkerd-config` configmap entirely.
This PR only adds and populates the new secret. The secret is not yet read or used anywhere. Subsequent PRs will update individual control plane components to accept their configuration through flags and will update the `linkerd upgrade` flow to use this secret instead of the `linkerd-config` configmap.
This secret is only generated by the CLI and is not present or required when installing or upgrading with Helm.
Here are sample contents of the secret, base64 decoded. Note that identity tls context is saved as an override so that it can be persisted across updates. Since these fields contain private key material, this object must be a secret. This secret is only used for upgrades and thus only the CLI needs to be able to read it. We will not create any RBAC bindings to grant service accounts access to this secret.
```
global:
identityTrustAnchorsPEM: |
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
heartbeatSchedule: '42 23 * * * '
identity:
issuer:
crtExpiry: "2021-08-25T23:32:17Z"
tls:
crtPEM: |
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
keyPEM: |
-----BEGIN EC PRIVATE KEY-----
MHcCAQEEIJaqjoDnqkKSsTqJMGeo3/1VMfJTBsMEuMWYzdJVxIhToAoGCCqGSM49
AwEHoUQDQgAENHuyDwZVWdN0y/FFZTg5ZW4fG9qXDOZm7UhoKV/c9Jd5+TO9KB5+
9ecbtrM4et6AYz5dmXzgOQXeN3CSJLDjUA==
-----END EC PRIVATE KEY-----
```
Signed-off-by: Alex Leong <alex@buoyant.io>
Currently the secrets for the proxy-injector, sp-validator webhooks and tap API service are using the Opaque secret type and linkerd-specific field names. This makes it impossible to use cert-manager (https://github.com/jetstack/cert-manager) to provisions and rotate the secrets for these services. This change converts the secrets defined in the linkerd2 helm charts and the controller use the kubernetes.io/tls format instead. This format is used for secrets containing the generated secrets by cert-manager.
Signed-off-by: Lutz Behnke <lutz.behnke@finleap.com>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
Updating only the go 1.15 version, makes the upgrades fail from older versions,
as the identity certs do not have that setting and go 1.15 expects them.
This PR upgrades the cert generation code to have that field,
allowing us to move to go 1.15 in later versions of Linkerd.
Fixes#4790
This PR removes both the SMI-Metrics templates along with the
experimental sub-commands. This also removes pkg `smi-metrics`
as there is no direct use of it without the commands.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
## What/How
@adleong pointed out in #4780 that when enabling slices during an upgrade, the new value does not persist in the `linkerd-config` ConfigMap. I took a closer look and it seems that we were never overwriting the values in case they were different.
* To fix this, I added an if block when validating and building the upgrade options -- if the current flag value differs from what we have in the ConfigMap, then change the ConfigMap value.
* When doing so, I made sure to check that if the cluster does not support `EndpointSlices` yet the flag is set to true, we will error out. This is done similarly (copy&paste similarily) to what's in the install part.
* Additionally, I have noticed that the helm ConfigMap template stored the flag value under `enableEndpointSlices` field name. I assume this was not changed in the initial PR to reflect the changes made in the protocol buffer. The API (and thus the CLI) uses the field name `endpointSliceEnabled` instead. I have changed the config template so that helm installations will use the same field, which can then be used in the destination service or other components that may implement slice support in the future.
Signed-off-by: Matei David <matei.david.35@gmail.com>
[Link to RFC](https://github.com/linkerd/rfc/pull/23)
### What
---
* PR that puts together all past pieces of the puzzle to deliver topology-aware service routing, as specified in the [Kubernetes docs](https://kubernetes.io/docs/concepts/services-networking/service-topology/) but with a much better load balancing algorithm and all the coolness of linkerd :)
* The first piece of this PR is focused on adding topology metadata: topology preference for services and topology `<k,v>` pairs for endpoints.
* The second piece of this PR puts together the new context format and fetching the source node topology metadata in order to allow for endpoints filtering.
* The final part is doing the filtering -- passing all of the metadata to the listener and on every `Add` filtering endpoints based on the topology preference of the service, topology `<k,v>` pairs of endpoints and topology of the source (again `<k,v>` pairs).
### How
---
* **Collecting metadata**:
- Services do not have values for topology keys -- the topological keys defined in a service's spec are only there to dictate locality preference for routing; as such, I decided to store them in an array, they will be taken exactly as they are found in the service spec, this ensures we respect the preference order.
- For EndpointSlices, we are using a map -- an EndpointSlice has locality information in the form of `<k,v>` pair, where the key is a topological key (similar to what's listed in the service) and the value is the locality information -- e.g `hostname: minikube`. For each address we now have a map of topology values which gets populated when we translate the endpoints to an address set. Because normal Endpoints do not have any topology information, we create each address with an empty map which is subsequently populated ONLY for slices in the `endpointSliceToAddressSet` function.
* **Filtering endpoints**:
- This was a tricky part and filled me with doubts. I think there are a few ways to do this, but this is how I "envisioned" it. First, the `endpoint_translator.go` should be the one to do the filtering; this means that on subscription, we need to feed all of the relevant metadata to the listener. To do this, I created a new function `AddTopologyFilter` as part of the listener interface.
- To complement the `AddTopologyFilter` function, I created a new `TopologyFilter` struct in `endpoints_watcher.go`. I then embedded this structure in all listeners that implement the interface. The structure holds the source topology (source node), a boolean to tell if slices are activated in case we need to double check (or write tests for the function) and the service preference. We create the filter on Subscription -- we have access to the k8s client here as well as the service, so it's the best point to collect all of this data together. Addresses all have their own topology added to them so they do not have to be collected by the filter.
- When we add a new set of addresses, we check to see if slices are enabled -- chances are if slices are enabled, service topology might be too. This lets us skip this step if the latest version is not adopted. Prior to sending an `Add` we filter the endpoints -- if the preference is registered by the filter we strictly enforce it, otherwise nothing changes.
And that's pretty much it.
Signed-off-by: Matei David <matei.david.35@gmail.com>
Supersedes #4846
Bump proxy-init to v1.3.6, containing CNI fixes and support for
multi-arch builds.
#4846 included this in v1.3.5 but proxy.golang.org refused to update the
modified SHA
This PR moves default values into add-on specific values.yaml thus
allowing us to update default values as they would not be present in
linkerd-config-addons cm.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* bump prometheus to the latest v2.19.3
latest prometheus version shows a lot of decrease in the memory usage
and other benefits
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
This pr adds `globa.prometheusUrl` field which will be used to configure publlic-api, hearbeat, grafana, etc (i,e query path) to use a external Prometheus.
* support overriding inbound and outbound connect timeouts.
* add validation on user provided TCP connect timeouts
* convert valid time values into ms
Signed-off-by: Matt Miller <mamiller@rosettastone.com>
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
EndpointSlices have been made opt-in due to their experimental nature. This PR
introduces a new install flag 'enableEndpointSlices' that will allow adopters to
specify in their cli install or helm install step whether they would like to
use endpointslices as a resource in the destination service, instead of the
endpoints k8s resource.
Signed-off-by: Matei David <matei.david.35@gmail.com>
This moves Prometheus as a add-on, thus making it optional but enabled by default. The also make `linkerd-prometheus` more configurable, and allow it to have its own life-cycle for upgrades, configuration, etc.
This work will be followed by documentation that help users configure existing Prometheus to work with Linkerd.
**Changes Include:**
- moving prometheus manifests into a separate chart at `charts/add-ons/prometheus`, and adding it as a dependency to `linkerd2`
- implement the `addOn` interface to support the same with CLI.
- include configuration in `linkerd-config-addons`
**User Facing Changes:**
The default install experience does not change much but for users who have already configured Prometheus differently, would need to apply the same using the new configuration fields present in chart README
Based on the [EndpointSlice PR](https://github.com/linkerd/linkerd2/pull/4663), this is just the k8s/api support for endpointslices to shorten the first PR.
* Adds CRD
* Adds functions that check whether the cluster has EndpointSlice access
* Adds discovery & endpointslice informers to api.
Signed-off-by: Matei David <matei.david.35@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
Data disappears upon prometheus restarts due to it being all in-memory.
Adding an option to enabled persistence by means of a PVC would be the right approach. It is commonly seen in a wide array of helm charts.
Fixes#4576
Signed-off-by: Naseem <naseem@transit.app>
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
As reported in #4259 linkerd check run from linkerd's web cconsole is
broken as the underlying RBAC Role cannot access the apiregistration.k8s.io API Group.
With this commit the RBAC Role is fixed allowing read-only access to the API Group
apiregistration.k8s.io.
Fixes#4259
Signed-off-by: alex.berger@nexiot.ch <alex.berger@nexiot.ch>
Put back space after `grafanaUrl` label in `linkerd-config-addons.yaml`
to avoid breaking the yaml parsing.
```
$ linkerd check
...
linkerd-addons
--------------
‼ 'linkerd-config-addons' config map exists
could not unmarshal linkerd-config-addons config-map: error
unmarshaling JSON: while decoding JSON: json: cannot unmarshal
string into Go struct field Values.global of type linkerd2.Global
```
This was added in #4544 to avoid having the configmap being badly formatted.
So this PR fixes the yaml, but then if we don't set `grafanaUrl` the
configmap format gets messed up, but apparently that's just a cosmetic
problem:
```
apiVersion: v1
data:
values: "global:\n grafanaUrl: \ngrafana:\n enabled: true\n
image:\n name:
gcr.io/linkerd-io/grafana\n name: linkerd-grafana\n resources:\n
cpu:\n limit:
240m\n memory:\n limit: null\ntracing:\n enabled:
false"
kind: ConfigMap
```
Fixes#4454
As explained
[here](https://github.com/kubernetes/kubernetes/issues/36222#issuecomment-553966166),
trailing spaces in configmap data makes it to look funky when retrieved
later on. This is currently affecting `linkerd-config-addons` and
`linkerd-gateway-config`:
```
$ k -n linkerd-multicluster get cm linkerd-gateway-config -oyaml
apiVersion: v1
data:
nginx.conf: "events {\n}\nstream { \n
\ server { \n
\ listen 4180; \n
\ proxy_pass 127.0.0.1:4140; \n
\ } \n}
\nhttp {\n server {\n listen 4181;\n location /health {\n access_log
off;\n return 200 \"healthy\\n\";\n }\n }\n server {\n listen
\ 8888;\n location /health-local {\n access_log off;\n return
200 \"healthy\\n\";\n }\n } \n}"
kind: ConfigMap
```
AFAIK this is only cosmetic and doesn't affect functionality.
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
This allows end user flexibility for options such as log format. Rather than bubbling up such possible config options into helm values, extra arguments provides more flexibility.
Add prometheusAlertmanagers value allows configuring a list of statically targetted alertmanager instances.
Use rule configmaps for prometheus rules. They take a list of {name,subPath,configMap} values and mounts them accordingly. Provided that subpaths end with _rules.yml or _rules.yaml they should be loaded by prometheus as per prometheus.yml's rule_files content.
Signed-off-by: Naseem <naseem@transit.app>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Oliver Gould
Alex Leong
Tarun Pothulapati
Lutz Behnke
Alejandro Pedraza
Zahari Dichev
Matei David
cpretzer
Matt Miller
Naseem
Alexander Berger
Lutz Behnke