The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
## Motivations
Closes#5080
## Solution
When the `--all-namespaces` (`-A`) flag is set for the `linkerd edges` command,
ignore the `namespace` value set by default or `-n`.
This is similar to the behavior for `kubectl`. `kubectl get -A -n linkerd pods`
showing pods in all namespaces.
### Behavior changes
With linkerd and emojivoto installed, this results in:
Before:
```
❯ linkerd edges -A pods
No edges found.
```
After:
```
❯ linkerd edges -A pods
SRC DST SRC_NS DST_NS SECURED
vote-bot-6cb9cb9569-wl6w5 web-5d69bcfdb7-mxf8f emojivoto emojivoto √
web-5d69bcfdb7-mxf8f emoji-7dc976587b-rb9c5 emojivoto emojivoto √
web-5d69bcfdb7-mxf8f voting-bdf4f778c-pjkjg emojivoto emojivoto √
linkerd-prometheus-68d6897d75-ghmgm emoji-7dc976587b-rb9c5 linkerd emojivoto √
linkerd-prometheus-68d6897d75-ghmgm vote-bot-6cb9cb9569-wl6w5 linkerd emojivoto √
linkerd-prometheus-68d6897d75-ghmgm voting-bdf4f778c-pjkjg linkerd emojivoto √
linkerd-prometheus-68d6897d75-ghmgm web-5d69bcfdb7-mxf8f linkerd emojivoto √
linkerd-controller-7d965cf78d-qw6xj linkerd-prometheus-68d6897d75-ghmgm linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-controller-7d965cf78d-qw6xj linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-destination-74dbb9c46b-nkxgh linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-grafana-5d9fb67dc6-sn2l8 linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-identity-c875b5d58-b756v linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-proxy-injector-767b55988d-n9r6f linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-sp-validator-6c8df84fb9-4w8kc linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-tap-777fbf7656-p87dm linkerd linkerd √
linkerd-prometheus-68d6897d75-ghmgm linkerd-web-546c9444b5-68xpx linkerd linkerd √
```
`linkerd edges -A -n linkerd pods` results in all edges as well (the result
above).
The behavior of `linkerd edges pods` does not change and shows edges in the
`default` namespace.
```
❯ linkerd edges pods
No edges found.
```
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
The proxy has a default, hardcoded set of ports on which it doesn't do
protocol detection (25, 587, 3306 -- all of which are server-first
protocols). In a recent change, this default set was removed from
the outbound proxy, since there was no way to configure it to anything
other than the default set. I had thought that there was a default set
applied to proxy-init, but this appears to not be the case.
This change adds these ports to the default Helm values to restore the
prior behavior.
I have also elected to include 443 in this set, as it is generally our
recommendation to avoid proxying HTTPS traffic, since the proxy provides
very little value on these connections today.
Additionally, the memcached port 11211 is skipped by default, as clients
do not issue any sort of preamble that is immediately detectable.
These defaults may change in the future, but seem like good choices for
the 2.9 release.
* Expand 'linkerd edges' to work with TCP connections
Fixes#4999
Before:
```
$ bin/linkerd edges po -owide
SRC DST SRC_NS DST_NS CLIENT_ID SERVER_ID SECURED
linkerd-prometheus-764ddd4f88-t6c2j rabbitmq-controller-5c6cf7cc6d-8lxp2 linkerd default √
linkerd-prometheus-764ddd4f88-t6c2j temp linkerd default √
```
After:
```
$ bin/linkerd edges po -owide
SRC DST SRC_NS DST_NS CLIENT_ID SERVER_ID SECURED
temp rabbitmq-controller-5c6cf7cc6d-5fpsc default default default.default default.default √
linkerd-prometheus-66fb97b7fc-vpnxf rabbitmq-controller-5c6cf7cc6d-5fpsc linkerd default √
linkerd-prometheus-66fb97b7fc-vpnxf temp linkerd default √
```
With the latest proxy upgrade to v2.113.0 (#5037), the `tcp_open_total` metric now contains the `client_id` label so that we can replace the http-only metric `response_total` with this one to determine edges for TCP-only connections.
This change basically performs the same query as before, but two times, one for `response_total` and another for `tcp_open_total`. For each resulting entry, the latter is kept if `client_id` is present, otherwise the former is used (if present at all). That way things keep on working for older proxies.
Disclaimers:
- This doesn't fix#3706: if two sources connect to the same destination there's no way to tell them appart from the metrics perspective and their edges can get mangled. To fix that, the proxy would have to expose `src_resource` labels in the `tcp_open_total` total inbound metric.
- Note connections coming from prometheus are still unidentified. The reason is those hit the proxy's admin server (instead of the main container) which doesn't expose metrics.
Since k8s 1.16 cadvisor uses the `container` label instead of
`container_name` in the prometheus metrics it exposes.
The heartbeat queries were using the latter, so they were broken
for k8s version since 1.16.
Note that the `p99-handle-us` value is still missing because the
`request_handle_us` metrics is always zero.
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
## Motivation
Closes#5016
Depends on linkerd/linkerd2-proxy-api#44
## Solution
A `profileTranslator` exists for each service and now has a new
`fullyQualifiedName` field.
This field is used to set the `FullyQualifiedName` field of
`DestinationProfile`s each time an update is sent.
In the case that no service profile exists for a service, a default
`DestinationProfile` is created and we can use the field to set the correct
name.
In the case that a service profile does exist for a service, we still use this
field to set the name to keep it consistent.
### Example
Install linkerd on a cluster and run the destination server:
```
go run controller/cmd/main.go destination -kubeconfig ~/.kube/config
```
Get the IP of a service. Here, we'll get the ip for `linkerd-identity`:
```
> kubectl get -n linkerd svc/linkerd-identity
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
linkerd-identity ClusterIP 10.43.161.68 <none> 8080/TCP 4h25m
```
Get the profile of `linkerd-identity` from service name or IP and note the
`FullyQualifiedName` field:
```
> go run controller/script/destination-client/main.go -method getProfile -path 10.43.161.68:8080
INFO[0000] fully_qualified_name:"linkerd-identity.linkerd.svc.cluster.local" ..
```
```
> go run controller/script/destination-client/main.go -method getProfile -path linkerd-identity.linkerd.svc.cluster.local
INFO[0000] fully_qualified_name:"linkerd-identity.linkerd.svc.cluster.local" ..
```
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Fixes#4191#4993
This bumps Kubernetes client-go to the latest v0.19.2 (We had to switch directly to 1.19 because of this issue). Bumping to v0.19.2 required upgrading to smi-sdk-go v0.4.1. This also depends on linkerd/stern#5
This consists of the following changes:
- Fix ./bin/update-codegen.sh by adding the template path to the gen commands, as it is needed after we moved to GOMOD.
- Bump all k8s related dependencies to v0.19.2
- Generate CRD types, client code using the latest k8s.io/code-generator
- Use context.Context as the first argument, in all code paths that touch the k8s client-go interface
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When the service-mirror component can't reach the target's k8s API, the goroutine blocks and it can't be unblocked.
This was happenining specifically in the case of the multicluster integration test (still to be pushed), where the source and target clusters are created in quick succession and the target's API service doesn't always have time to be exposed before being requested by the service mirror.
The fix consists on no longer have restartClusterWatcher be side-effecting, and instead return an error. If such error is not nil then the link watcher is stopped and reset after 10 seconds.
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
All of the code for the service mirror controller lives in the `linkerd/linkerd2/controller/cmd` package. It is typical for control plane components to only have a `main.go` entrypoint in the cmd package. This can sometimes make it hard to find the service mirror code since I wouldn't expect it to be in the cmd package.
We move the majority of the code to a dedicated controller package, leaving only main.go in the cmd package. This is purely organizational; no behavior change is expected.
Signed-off-by: Alex Leong <alex@buoyant.io>
## What/How
@adleong pointed out in #4780 that when enabling slices during an upgrade, the new value does not persist in the `linkerd-config` ConfigMap. I took a closer look and it seems that we were never overwriting the values in case they were different.
* To fix this, I added an if block when validating and building the upgrade options -- if the current flag value differs from what we have in the ConfigMap, then change the ConfigMap value.
* When doing so, I made sure to check that if the cluster does not support `EndpointSlices` yet the flag is set to true, we will error out. This is done similarly (copy&paste similarily) to what's in the install part.
* Additionally, I have noticed that the helm ConfigMap template stored the flag value under `enableEndpointSlices` field name. I assume this was not changed in the initial PR to reflect the changes made in the protocol buffer. The API (and thus the CLI) uses the field name `endpointSliceEnabled` instead. I have changed the config template so that helm installations will use the same field, which can then be used in the destination service or other components that may implement slice support in the future.
Signed-off-by: Matei David <matei.david.35@gmail.com>
## Motivation
#4879
## Solution
When no traffic split exists for services, return a single destination override
with a weight of 100%.
Using the destination client on a new linkerd installation, this results in the
following output for `linkerd-identity` service:
```
❯ go run controller/script/destination-client/main.go -method getProfile -path linkerd-identity.linkerd.svc.cluster.local:8080
INFO[0000] retry_budget:{retry_ratio:0.2 min_retries_per_second:10 ttl:{seconds:10}} dst_overrides:{authority:"linkerd-identity.linkerd.svc.cluster.local.:8080" weight:100000}
INFO[0000]
```
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
[Link to RFC](https://github.com/linkerd/rfc/pull/23)
### What
---
* PR that puts together all past pieces of the puzzle to deliver topology-aware service routing, as specified in the [Kubernetes docs](https://kubernetes.io/docs/concepts/services-networking/service-topology/) but with a much better load balancing algorithm and all the coolness of linkerd :)
* The first piece of this PR is focused on adding topology metadata: topology preference for services and topology `<k,v>` pairs for endpoints.
* The second piece of this PR puts together the new context format and fetching the source node topology metadata in order to allow for endpoints filtering.
* The final part is doing the filtering -- passing all of the metadata to the listener and on every `Add` filtering endpoints based on the topology preference of the service, topology `<k,v>` pairs of endpoints and topology of the source (again `<k,v>` pairs).
### How
---
* **Collecting metadata**:
- Services do not have values for topology keys -- the topological keys defined in a service's spec are only there to dictate locality preference for routing; as such, I decided to store them in an array, they will be taken exactly as they are found in the service spec, this ensures we respect the preference order.
- For EndpointSlices, we are using a map -- an EndpointSlice has locality information in the form of `<k,v>` pair, where the key is a topological key (similar to what's listed in the service) and the value is the locality information -- e.g `hostname: minikube`. For each address we now have a map of topology values which gets populated when we translate the endpoints to an address set. Because normal Endpoints do not have any topology information, we create each address with an empty map which is subsequently populated ONLY for slices in the `endpointSliceToAddressSet` function.
* **Filtering endpoints**:
- This was a tricky part and filled me with doubts. I think there are a few ways to do this, but this is how I "envisioned" it. First, the `endpoint_translator.go` should be the one to do the filtering; this means that on subscription, we need to feed all of the relevant metadata to the listener. To do this, I created a new function `AddTopologyFilter` as part of the listener interface.
- To complement the `AddTopologyFilter` function, I created a new `TopologyFilter` struct in `endpoints_watcher.go`. I then embedded this structure in all listeners that implement the interface. The structure holds the source topology (source node), a boolean to tell if slices are activated in case we need to double check (or write tests for the function) and the service preference. We create the filter on Subscription -- we have access to the k8s client here as well as the service, so it's the best point to collect all of this data together. Addresses all have their own topology added to them so they do not have to be collected by the filter.
- When we add a new set of addresses, we check to see if slices are enabled -- chances are if slices are enabled, service topology might be too. This lets us skip this step if the latest version is not adopted. Prior to sending an `Add` we filter the endpoints -- if the preference is registered by the filter we strictly enforce it, otherwise nothing changes.
And that's pretty much it.
Signed-off-by: Matei David <matei.david.35@gmail.com>
## Motivation
These changes came up when testing mock identity. I found it useful for the
destination client to print the identity of endpoints.
```
❯ go run controller/script/destination-client/main.go -method get -path h1.test.example.com:8080
INFO[0000] Add:
INFO[0000] labels: map[concrete:h1.test.example.com:8080]
INFO[0000] - 127.0.0.1:4143
INFO[0000] - labels: map[addr:127.0.0.1:4143 h2:false]
INFO[0000] - protocol hint: UNKNOWN
INFO[0000] - identity: dns_like_identity:{name:"foo.ns1.serviceaccount.identity.linkerd.cluster.local"}
INFO[0000]
```
I also fixed a log line in the proxy-identity where used the wrong value for the
CSR path
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This PR corrects misspellings identified by the [check-spelling action](https://github.com/marketplace/actions/check-spelling).
The misspellings have been reported at aaf440489e (commitcomment-41423663)
The action reports that the changes in this PR would make it happy: 5b82c6c5ca
Note: this PR does not include the action. If you're interested in running a spell check on every PR and push, that can be offered separately.
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
Supersedes #4846
Bump proxy-init to v1.3.6, containing CNI fixes and support for
multi-arch builds.
#4846 included this in v1.3.5 but proxy.golang.org refused to update the
modified SHA
Fixes#4774
When a service mirror controller is unable to connect to the target cluster's API, the service mirror controller crashes with the error that it has failed to sync caches. This error lacks the necessary detail to debug the situation. Unfortunately, client-go does not surface more useful information about why the caches failed to sync.
To make this more debuggable we do a couple things:
1. When creating the target cluster api client, we eagerly issue a server version check to test the connection. If the connection fails, the service-mirror-controller logs now look like this:
```
time="2020-07-30T23:53:31Z" level=info msg="Got updated link broken: {Name:broken Namespace:linkerd-multicluster TargetClusterName:broken TargetClusterDomain:cluster.local TargetClusterLinkerdNamespace:linkerd ClusterCredentialsSecret:cluster-credentials-broken GatewayAddress:35.230.81.215 GatewayPort:4143 GatewayIdentity:linkerd-gateway.linkerd-multicluster.serviceaccount.identity.linkerd.cluster.local ProbeSpec:ProbeSpec: {path: /health, port: 4181, period: 3s} Selector:{MatchLabels:map[] MatchExpressions:[{Key:mirror.linkerd.io/exported Operator:Exists Values:[]}]}}"
time="2020-07-30T23:54:01Z" level=error msg="Unable to create cluster watcher: cannot connect to api for target cluster remote: Get \"https://36.199.152.138/version?timeout=32s\": dial tcp 36.199.152.138:443: i/o timeout"
```
This error also no longer causes the service mirror controller to crash. Updating the Link resource will cause the service mirror controller to reload the credentials and try again.
2. We rearrange the checks in `linkerd check --multicluster` to perform the target API connectivity checks before the service mirror controller checks. This means that we can validate the target cluster API connection even if the service mirror controller is not healthy. We also add a server version check here to quickly determine if the connection is healthy. Sample check output:
```
linkerd-multicluster
--------------------
√ Link CRD exists
√ Link resources are valid
* broken
W0730 16:52:05.620806 36735 transport.go:243] Unable to cancel request for promhttp.RoundTripperFunc
× remote cluster access credentials are valid
* failed to connect to API for cluster: [broken]: Get "https://36.199.152.138/version?timeout=30s": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
see https://linkerd.io/checks/#l5d-smc-target-clusters-access for hints
W0730 16:52:35.645499 36735 transport.go:243] Unable to cancel request for promhttp.RoundTripperFunc
× clusters share trust anchors
Problematic clusters:
* broken: unable to fetch anchors: Get "https://36.199.152.138/api/v1/namespaces/linkerd/configmaps/linkerd-config?timeout=30s": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)
see https://linkerd.io/checks/#l5d-multicluster-clusters-share-anchors for hints
√ service mirror controller has required permissions
* broken
√ service mirror controllers are running
* broken
× all gateway mirrors are healthy
wrong number of (0) gateway metrics entries for probe-gateway-broken.linkerd-multicluster
see https://linkerd.io/checks/#l5d-multicluster-gateways-endpoints for hints
√ all mirror services have endpoints
‼ all mirror services are part of a Link
mirror service voting-svc-gke.emojivoto is not part of any Link
see https://linkerd.io/checks/#l5d-multicluster-orphaned-services for hints
```
Some logs from the underlying go network libraries sneak into the output which is kinda gross but I don't think it interferes too much with being able to understand what's going on.
Signed-off-by: Alex Leong <alex@buoyant.io>
Build ARM docker images in the release workflow.
# Changes:
- Add a new env key `DOCKER_MULTIARCH` and `DOCKER_PUSH`. When set, it will build multi-arch images and push them to the registry. See https://github.com/docker/buildx/issues/59 for why it must be pushed to the registry.
- Usage of `crazy-max/ghaction-docker-buildx ` is necessary as it already configured with the ability to perform cross-compilation (using QEMU) so we can just use it, instead of manually set up it.
- Usage of `buildx` now make default global arguments. (See: https://docs.docker.com/engine/reference/builder/#automatic-platform-args-in-the-global-scope)
# Follow-up:
- Releasing the CLI binary file in ARM architecture. The docker images resulting from these changes already build in the ARM arch. Still, we need to make another adjustment like how to retrieve those binaries and to name it correctly as part of Github Release artifacts.
Signed-off-by: Ali Ariff <ali.ariff12@gmail.com>
Fixes#4707
In order to remove a multicluster link, we add a `linkerd multicluster unlink` command which produces the yaml necessary to delete all of the resources associated with a `linkerd multicluster link`. These are:
* the link resource
* the service mirror controller deployment
* the service mirror controller's RBAC
* the probe gateway mirror for this link
* all mirror services for this link
This command follows the same pattern as the `linkerd uninstall` command in that its output is expected to be piped to `kubectl delete`. The typical usage of this command is:
```
linkerd --context=source multicluster unlink --cluster-name=foo | kubectl --context=source delete -f -
```
This change also fixes the shutdown lifecycle of the service mirror controller by properly having it listen for the shutdown signal and exit its main loop.
A few alternative designs were considered:
I investigated using owner references as suggested [here](https://github.com/linkerd/linkerd2/issues/4707#issuecomment-653494591) but it turns out that owner references must refer to resources in the same namespace (or to cluster scoped resources). This was not feasible here because a service mirror controller can create mirror services in many different namespaces.
I also considered having the service mirror controller delete the mirror services that it created during its own shutdown. However, this could lead to scenarios where the controller is killed before it finishes deleting the services that it created. It seemed more reliable to have all the deletions happen from `kubectl delete`. Since this is the case, we avoid having the service mirror controller delete mirror services, even when the link is deleted, to avoid the race condition where the controller and CLI both attempt to delete the same mirror services and one of them fails with a potentially alarming error message.
Signed-off-by: Alex Leong <alex@buoyant.io>
* support overriding inbound and outbound connect timeouts.
* add validation on user provided TCP connect timeouts
* convert valid time values into ms
Signed-off-by: Matt Miller <mamiller@rosettastone.com>
* Introduce multicluster gateway api handler in web api server
* Added MetricsUtil for Gateway metrics
* Added gateway api helper
* Added Gateway Component
Updated metricsTable component to support gateway metrics
Added handler for gateway
Fixes#4601
Signed-off-by: Tharun <rajendrantharun@live.com>
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
This PR removes the service mirror controller from `linkerd mc install` to `linkerd mc link`, as described in https://github.com/linkerd/rfc/pull/31. For fuller context, please see that RFC.
Basic multicluster functionality works here including:
* `linkerd mc install` installs the Link CRD but not any service mirror controllers
* `linkerd mc link` creates a Link resource and installs a service mirror controller which uses that Link
* The service mirror controller creates and manages mirror services, a gateway mirror, and their endpoints.
* The `linkerd mc gateways` command lists all linked target clusters, their liveliness, and probe latences.
* The `linkerd check` multicluster checks have been updated for the new architecture. Several checks have been rendered obsolete by the new architecture and have been removed.
The following are known issues requiring further work:
* the service mirror controller uses the existing `mirror.linkerd.io/gateway-name` and `mirror.linkerd.io/gateway-ns` annotations to select which services to mirror. it does not yet support configuring a label selector.
* an unlink command is needed for removing multicluster links: see https://github.com/linkerd/linkerd2/issues/4707
* an mc uninstall command is needed for uninstalling the multicluster addon: see https://github.com/linkerd/linkerd2/issues/4708
Signed-off-by: Alex Leong <alex@buoyant.io>
* Migrate CI to docker buildx and other improvements
## Motivation
- Improve build times in forks. Specially when rerunning builds because of some flaky test.
- Start using `docker buildx` to pave the way for multiplatform builds.
## Performance improvements
These timings were taken for the `kind_integration.yml` workflow when we merged and rerun the lodash bump PR (#4762)
Before these improvements:
- when merging: `24:18`
- when rerunning after merge (docker cache warm): `19:00`
- when running the same changes in a fork (no docker cache): `32:15`
After these improvements:
- when merging: `25:38`
- when rerunning after merge (docker cache warm): `19:25`
- when running the same changes in a fork (docker cache warm): `19:25`
As explained below, non-forks and forks now use the same cache, so the important take is that forks will always start with a warm cache and we'll no longer see long build times like the `32:15` above.
The downside is a slight increase in the build times for non-forks (up to a little more than a minute, depending on the case).
## Build containers in parallel
The `docker_build` job in the `kind_integration.yml`, `cloud_integration.yml` and `release.yml` workflows relied on running `bin/docker-build` which builds all the containers in sequence. Now each container is built in parallel using a matrix strategy.
## New caching strategy
CI now uses `docker buildx` for building the container images, which allows using an external cache source for builds, a location in the filesystem in this case. That location gets cached using actions/cache, using the key `{{ runner.os }}-buildx-${{ matrix.target }}-${{ env.TAG }}` and the restore key `${{ runner.os }}-buildx-${{ matrix.target }}-`.
For example when building the `web` container, its image and all the intermediary layers get cached under the key `Linux-buildx-web-git-abc0123`. When that has been cached in the `main` branch, that cache will be available to all the child branches, including forks. If a new branch in a fork asks for a key like `Linux-buildx-web-git-def456`, the key won't be found during the first CI run, but the system falls back to the key `Linux-buildx-web-git-abc0123` from `main` and so the build will start with a warm cache (more info about how keys are matched in the [actions/cache docs](https://docs.github.com/en/actions/configuring-and-managing-workflows/caching-dependencies-to-speed-up-workflows#matching-a-cache-key)).
## Packet host no longer needed
To benefit from the warm caches both in non-forks and forks like just explained, we're required to ditch doing the builds in Packet and now everything runs in the github runners VMs.
As a result there's no longer separate logic for non-forks and forks in the workflow files; `kind_integration.yml` was greatly simplified but `cloud_integration.yml` and `release.yml` got a little bigger in order to use the actions artifacts as a repository for the images built. This bloat will be fixed when support for [composite actions](https://github.com/actions/runner/blob/users/ethanchewy/compositeADR/docs/adrs/0549-composite-run-steps.md) lands in github.
## Local builds
You still are able to run `bin/docker-build` or any of the `docker-build.*` scripts. And to make use of buildx, run those same scripts after having set the env var `DOCKER_BUILDKIT=1`. Using buildx supposes you have installed it, as instructed [here](https://github.com/docker/buildx).
## Other
- A new script `bin/docker-cache-prune` is used to remove unused images from the cache. Without that the cache grows constantly and we can rapidly hit the 5GB limit (when the limit is attained the oldest entries get evicted).
- The `go-deps` dockerfile base image was changed from `golang:1.14.2` (ubuntu based) to `golang-1:14.2-alpine` also to conserve cache space.
# Addressed separately in #4875:
Got rid of the `go-deps` image and instead added something similar on top of all the Dockerfiles dealing with `go`, as a first stage for those Dockerfiles. That continues to serve as a way to pre-populate go's build cache, which speeds up the builds in the subsequent stages. That build should in theory be rebuilt automatically only when `go.mod` or `go.sum` change, and now we don't require running `bin/update-go-deps-shas`. That script was removed along with all the logic elsewhere that used it, including the `go_dependencies` job in the `static_checks.yml` github workflow.
The list of modules preinstalled was moved from `Dockerfile-go-deps` to a new script `bin/install-deps`. I couldn't find a way to generate that list dynamically, so whenever a slow-to-compile dependency is found, we have to make sure it's included in that list.
Although this simplifies the dev workflow, note that the real motivation behind this was a limitation in buildx's `docker-container` driver that forbids us from depending on images that haven't been pushed to a registry, so we have to resort to building the dependencies as a first stage in the Dockerfiles.
* Small PR that uncomments the `EndpointSliceAcess` method and cleans up left over todos in the destination service.
* Based on the past three PRs related to `EndpointSlices` (#4663#4696#4740); they should now be functional (albeit prone to bugs) and ready to use.
Signed-off-by: Matei David <matei.david.35@gmail.com>
* Removes/Relaxes prometheus related checks
Now that prometheus is an add-on, There can be cases where prometheus is
disabled at which the check should show a warning but not fail. This
decouples the tight depedency.
This changes the following checks:
- Removes serviceAccount and pod checks in the CLI.
- Relaxes `linkerd-api` checks to only check for prometheus access when
the URL is not empty. This should work seamlessly with external
prometheus as that URL will be passed and it performs the same
check.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
EndpointSlices have been made opt-in due to their experimental nature. This PR
introduces a new install flag 'enableEndpointSlices' that will allow adopters to
specify in their cli install or helm install step whether they would like to
use endpointslices as a resource in the destination service, instead of the
endpoints k8s resource.
Signed-off-by: Matei David <matei.david.35@gmail.com>
## Motivation
Closes#3916
This adds the ability to get profiles for services by IP address.
### Change in behavior
When the destination server receives a `GetProfile` request with an IP address,
it now tries to map that IP address to a service.
If the IP address maps to an existing service, then the destination server
returns the profile stream subscribes for updates to the _service_--this is the
existing behavior. If the IP changes to a new service, the stream will still
send updates for the first service the IP address corresponded to since that is
what it is subscribed to.
If the IP address does not map to an existing service, then the destination
server returns the profile stream but does not subscribe for updates. The stream
will receive one update, the default profile.
### Solution
This change uses the `IPWatcher` within the destination server to check for what
services an IP address correspond to. By adding a new method `GetSvc` to
`IPWatcher`, the server now calls this method if `GetProfile` receives a request
with an IP address.
## Testing
Install linkerd on a cluster and get the cluster IP of any service:
```bash
❯ kubectl get -n linkerd svc/linkerd-tap -o wide
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE SELECTOR
linkerd-tap ClusterIP 10.104.57.90 <none> 8088/TCP,443/TCP 16h linkerd.io/control-plane-component=tap
```
Run the destination server:
```bash
❯ go run controller/cmd/main.go destination -kubeconfig ~/.kube/config
```
Get the profile for the tap service by IP address:
```bash
❯ go run controller/script/destination-client/main.go -method getProfile -path 10.104.57.90:8088
INFO[0000] retry_budget:{retry_ratio:0.2 min_retries_per_second:10 ttl:{seconds:10}}
INFO[0000]
```
Get the profile for an IP address that does not correspond to a service:
```bash
❯ go run controller/script/destination-client/main.go -method getProfile -path 10.256.0.1:8088
INFO[0000] retry_budget:{retry_ratio:0.2 min_retries_per_second:10 ttl:{seconds:10}}
INFO[0000]
```
You can add and remove settings for the service profile for tap and get updates.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
When a k8s pod is evicted its Phase is set to Failed and the reason is set to Evicted. Because in the ListPods method of the public APi we only transmit the phase and treat it as Status, the healthchecks assume such evicted data plane pods to be failed. Since this check is retryable, the results is that linkerd check --proxy appears to hang when there are evicted pods. As @adleong correctly pointed out here, the presence of evicted pod is not something that we should make the checks fail.
This change modifies the publci api to set the Pod.Status to "Evicted" for evicted pods. The healtcheks are also modified to not treat evicted pods as error cases.
Fix#4690
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
Removed `controller/proxy-injector/webhook_ops.go` and `controller/sp-validator/webhook_ops.go` that we used when we first introduced webhooks to dynamically create their configs, but we ended up doing that upfront at install time.
Using following command the wrong spelling were found and later on
fixed:
```
codespell --skip CHANGES.md,.git,go.sum,\
controller/cmd/service-mirror/events_formatting.go,\
controller/cmd/service-mirror/cluster_watcher_test_util.go,\
SECURITY_AUDIT.pdf,.gcp.json.enc,web/app/img/favicon.png \
--ignore-words-list=aks,uint,ans,files\' --check-filenames \
--check-hidden
```
Signed-off-by: Suraj Deshmukh <surajd.service@gmail.com>
Introduce support for the EndpointSlice k8s resource (k8s v1.16+) in the destination service.
Through this PR, in the EndpointsWatcher, there will be a dedicated informer for EndpointSlice;
the informer cannot run at the same time as the Endpoints resource informer. The main difference
is that EndpointSlices have a one-to-many relationship with a service, they provide better performance benefits,
dual-stack addresses and more. EndpointSlice support also implies service topology and other k8s related features.
Validated and tested manually, as well as with dedicated unit tests.
Closes#4501
Signed-off-by: Matei David <matei.david.35@gmail.com>
Based on the [EndpointSlice PR](https://github.com/linkerd/linkerd2/pull/4663), this is just the k8s/api support for endpointslices to shorten the first PR.
* Adds CRD
* Adds functions that check whether the cluster has EndpointSlice access
* Adds discovery & endpointslice informers to api.
Signed-off-by: Matei David <matei.david.35@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
Regenerated protobuf files, using version 1.4.2 that was upgraded from
1.3.2 with the proxy-api update in #4614.
As of v1.4 protobuf messages are disallowed to be copied (because they
hold a mutex), so whenever a message is passed to or returned from a
function we need to use a pointer.
This affects _mostly_ test files.
This is required to unblock #4620 which is adding a field to the config
protobuf.
Oliver Gould
Kevin Leimkuhler
Alejandro Pedraza
Tarun Pothulapati
Zahari Dichev
Ali Ariff
Alex Leong
Matei David
Josh Soref
cpretzer
Matt Miller
Tharun Rajendran
Wei Lun
Suraj Deshmukh
Naseem
Arthur Silva Sens
Lutz Behnke