The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
The proxy has a default, hardcoded set of ports on which it doesn't do
protocol detection (25, 587, 3306 -- all of which are server-first
protocols). In a recent change, this default set was removed from
the outbound proxy, since there was no way to configure it to anything
other than the default set. I had thought that there was a default set
applied to proxy-init, but this appears to not be the case.
This change adds these ports to the default Helm values to restore the
prior behavior.
I have also elected to include 443 in this set, as it is generally our
recommendation to avoid proxying HTTPS traffic, since the proxy provides
very little value on these connections today.
Additionally, the memcached port 11211 is skipped by default, as clients
do not issue any sort of preamble that is immediately detectable.
These defaults may change in the future, but seem like good choices for
the 2.9 release.
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
Fixes#4191#4993
This bumps Kubernetes client-go to the latest v0.19.2 (We had to switch directly to 1.19 because of this issue). Bumping to v0.19.2 required upgrading to smi-sdk-go v0.4.1. This also depends on linkerd/stern#5
This consists of the following changes:
- Fix ./bin/update-codegen.sh by adding the template path to the gen commands, as it is needed after we moved to GOMOD.
- Bump all k8s related dependencies to v0.19.2
- Generate CRD types, client code using the latest k8s.io/code-generator
- Use context.Context as the first argument, in all code paths that touch the k8s client-go interface
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
Supersedes #4846
Bump proxy-init to v1.3.6, containing CNI fixes and support for
multi-arch builds.
#4846 included this in v1.3.5 but proxy.golang.org refused to update the
modified SHA
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
Removed `controller/proxy-injector/webhook_ops.go` and `controller/sp-validator/webhook_ops.go` that we used when we first introduced webhooks to dynamically create their configs, but we ended up doing that upfront at install time.
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This change modifies the linkerd-gateway component to use the inbound
proxy, rather than nginx, for gateway. This allows us to detect loops and
propagate identity through the gateway.
This change also cleans up port naming to `mc-gateway` and `mc-probe`
to resolve conflicts with Kubernetes validation.
---
* proxy: v2.99.0
The proxy can now operate as gateway, routing requests from its inbound
proxy to the outbound proxy, without passing the requests to a local
application. This supports Linkerd's multicluster feature by adding a
`Forwarded` header to propagate the original client identity and assist
in loop detection.
---
* Add loop detection to inbound & TCP forwarding (linkerd/linkerd2-proxy#527)
* Test loop detection (linkerd/linkerd2-proxy#532)
* fallback: Unwrap errors recursively (linkerd/linkerd2-proxy#534)
* app: Split inbound/outbound constructors into components (linkerd/linkerd2-proxy#533)
* Introduce a gateway between inbound and outbound (linkerd/linkerd2-proxy#540)
* gateway: Add a Forwarded header (linkerd/linkerd2-proxy#544)
* gateway: Return errors instead of responses (linkerd/linkerd2-proxy#547)
* Fail requests that loop through the gateway (linkerd/linkerd2-proxy#545)
* inject: Support config.linkerd.io/enable-gateway
This change introduces a new annotation,
config.linkerd.io/enable-gateway, that, when set, enables the proxy to
act as a gateway, routing all traffic targetting the inbound listener
through the outbound proxy.
This also removes the nginx default listener and gateway port of 4180,
instead using 4143 (the inbound port).
* proxy: v2.100.0
This change modifies the inbound gateway caching so that requests may be
routed to multiple leaves of a traffic split.
---
* inbound: Do not cache gateway services (linkerd/linkerd2-proxy#549)
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#3984
We use the new `/live` admin endpoint in the Linkerd proxy for liveness probes instead of the `/metrics` endpoint. This endpoint returns a much smaller payload.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Bump proxy-init to v1.3.2
Bumped `proxy-init` version to v1.3.2, fixing an issue with `go.mod`
(linkerd/linkerd2-proxy-init#9).
This is a non-user-facing fix.
## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix auto-injecting pods and integration tests reporting
When creating an Event when auto-injection occurs (#3316) we try to
fetch the parent object to associate the event to it. If the parent
doesn't exist (like in the case of stand-alone pods) the event isn't
created. I had missed dealing with one part where that parent was
expected.
This also adds a new integration test that I verified fails before this
fix.
Finally, I removed from `_test-run.sh` some `|| exit_code=$?` that was
preventing the whole suite to report failure whenever one of the tests
in `/tests` failed.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have `GetOwnerKindAndName` be able to skip the cache
Refactored `GetOwnerKindAndName` so it can optionally skip the
shared informer cache and instead hit the k8s API directly.
Useful for the proxy injector, when the pod's replicaset got just
created and might not be in ready in the cache yet.
Fixes#2738
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#2720 and 2711
This changes the default behavior of `linkerd inject` to not inject the
proxy but just the `linkerd.io/inject: enabled` annotation for the
auto-injector to pick it up (regardless of any namespace annotation).
A new `--manual` mode was added, which behaves as before, injecting
the proxy in the command output.
The unit tests are running with `--manual` to avoid any changes in the
fixtures.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Oliver Gould
Tarun Pothulapati
Alejandro Pedraza
Zahari Dichev
cpretzer
Matei David
Naseem
Alex Leong
Mayank Shah
Kevin Leimkuhler
Paul Balogh
Ivan Sim
Andrew Seigner
arminbuerkle
Cody Vandermyn
Alejandro Pedraza
Kevin Lingerfelt