There was a problem that caused helm install to not reflect the proper list of ignored inbound and outbound ports. Namely if you supply just one port, that would not get reflected.
To reproduce do a:
```
helm install \
--name=linkerd2 \
--set-file global.identityTrustAnchorsPEM=ca.crt \
--set-file identity.issuer.tls.crtPEM=issuer.crt \
--set-file identity.issuer.tls.keyPEM=issuer.key \
--set identity.issuer.crtExpiry=2021-01-14T14:21:43Z \
--set-string global.proxyInit.ignoreInboundPorts="6666" \
linkerd-edge/linkerd2
```
Check your config:
```bash
$ kubectl get configmap -n linkerd -oyaml | grep ignoreInboundPort
"ignoreInboundPorts":[],
```
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This allows for users of Linkerd to leverage the Prometheus instance
deployed by the mesh for their metric needs. With support for pod labels
outside of the Linkerd metrics users are able to scrape metrics
based upon their own labels.
Signed-off-by: Dax McDonald <dax@rancher.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
As part of the effort to remove the "experimental" label from the CNI plugin, this PR introduces cni checks to `linkerd check`
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
Due to wrong snake casing, lifetime setting lifetime issuance was not reflected when installing through helm. This commit solved that problem
Signed-off-by: Zahari Dichev zaharidichev@gmail.com
* The `linkerd-cni` chart should set proper annotations/labels for the namespace
When installing through Helm, the `linkerd-cni` chart will (by default)
install itself under the same namespace ("linkerd") that the `linkerd` chart will be
installed aftewards. So it needs to set up the proper annotations and labels.
* Fix Helm install when disabling init containers
To install linkerd using Helm after having installed linkerd's CNI plugin, one needs to `--set noInitContainer=true`.
But to determine whether to use init containers or not, we weren't
evaluating that, but instead `Values.proxyInit`, which is indeed null
when installing through the CLI but not when installing with Helm. So
init containers were being set despite having passed `--set
noInitContainers=true`.
* update flags to smaller
* add tests for the same
* fix control plane trace flag
* add tests for controlplane tracing install
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
Fixes#3444Fixes#3443
## Background and Behavior
This change adds support for the destination service to resolve Get requests which contain a service clusterIP or pod ip as the `Path` parameter. It returns the stream of endpoints, just as if `Get` had been called with the service's authority. This lays the groundwork for allowing the proxy to TLS TCP connections by allowing the proxy to do destination lookups for the SO_ORIG_DST of tcp connections. When that ip address corresponds to a service cluster ip or pod ip, the destination service will return the endpoints stream, including the pod metadata required to establish identity.
Prior to this change, attempting to look up an ip address in the destination service would result in a `InvalidArgument` error.
Updating the `GetProfile` method to support ip address lookups is out of scope and attempts to look up an ip address with the `GetProfile` method will result in `InvalidArgument`.
## Implementation
We do this by creating a `IPWatcher` which wraps the `EndpointsWatcher` and supports lookups by ip. `IPWatcher` maintains a mapping up clusterIPs to service ids and translates subscriptions to an IP address into a subscription to the service id using the underlying `EndpointsWatcher`.
Since the service name is no longer always infer-able directly from the input parameters, we restructure `EndpointTranslator` and `PodSet` so that we propagate the service name from the endpoints API response.
## Testing
This can be tested by running the destination service locally, using the current kube context to connect to a Kubernetes cluster:
```
go run controller/cmd/main.go destination -kubeconfig ~/.kube/config
```
Then lookups can be issued using the destination client:
```
go run controller/script/destination-client/main.go -path 192.168.54.78:80 -method get -addr localhost:8086
```
Service cluster ips and pod ips can be used as the `path` argument.
Signed-off-by: Alex Leong <alex@buoyant.io>
The Kubernetes docs recommend a common set of labels for resources:
https://kubernetes.io/docs/concepts/overview/working-with-objects/common-labels/#labels
Add the following 3 labels to all control-plane workloads:
```
app.kubernetes.io/name: controller # or destination, etc
app.kubernetes.io/part-of: Linkerd
app.kubernetes.io/version: edge-X.Y.Z
```
Fixes#3816
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
* Pods with non empty securitycontext capabilities fail to be injected
Followup to #3744
The `_capabilities.tpl` template got its variables scope changed in
`Values.Proxy`, which caused inject to fail when security context
capabilities were detected.
Discovered when testing injecting the nginx ingress controller.
* Add identity-issuer-certificate-file and identity-issuer-key-file to upgrade command
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Implement logic to use identity-trust-anchors-file flag to update the anchors
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Address remarks
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* No need for `processYAML()` in `install`
Since `install` uses helm to do its proxy injection, there's no need to
call `processYAML`. This also fixes an issue discovered in #3687 where
we started supporting injection of cronjobs, and even though `linkerd`'s
namespace is flagged to skip automatic injection it was being injected.
This replaces #3773 as it's a much more simpler approach.
* Traffic split integration test
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Address comments
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Display placeholder when there is no basic stats data
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Replaced `uuid` with `uid` from linkerd-config resource
Fixes#3621
Removed the old `uuid` for identifying linkerd installations, and
replaced it with the `uid` property from the `linkerd-config` ConfigMap.
I tested that this `uid` remains the same by updating the config and
also upgrading linkerd, using both the CLI and Helm.
Note that this required granting `linkerd-web` RBAC access to the
`linkerd-config` Config.
I also added an integration test to verify the stability of the uid.
`linkerd check` can now be run from the dashboard in the `/controlplane` view.
Once the check results are received, they are displayed in a modal in a similar
style to the CLI output.
Closes#3613
* Add support for uninject command to uninject namespace configs
* Add relevant unit tests in cli/cmd/uninject_test.go
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Add cmd to inject debug sidecar for l5d components only
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Revert "Add cmd to inject debug sidecar for l5d components only"
This reverts commit 50b8b3577e.
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Stop uninjecting metadata from control plane components
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Ensure inject can be run on control plane components only if --manual is present
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* DNS rebinding protection for the dashboard
Fixes#3083 and replacement for #3629
This adds a new parameter to the `linkerd-web` container `enforcedHost`
that establishes the regexp that the Host header must enforce, otherwise
it returns an error.
This parameter will be hard-coded for now, in `linkerd-web`'s deployment
yaml.
Note this also protects the dashboard because that's proxied from
`linkerd-web`.
Also note this means the usage of `linkerd dashboard --address` will
require the user to change that parameter in the deployment yaml (or
have Kustomize do it).
How to test:
- Run `linkerd dashboard`
- Go to http://rebind.it:8080/manager.html and change the target port to
50750
- Click on “Start Attack” and wait for a minute.
- The response from the dashboard will be returned, showing an 'Invalid
Host header' message returned by the dashboard. If the attack would have
succeeded then the dashboard's html would be shown instead.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Add inject support for namespaces(Fix#3255)
* Add relevant unit tests (including overridden annotations)
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* If tap source IP matches many running pods then only show the IP
When an unmeshed source ip matched more than one running pod, tap was
showing the names for all those pods, even though the didn't necessary
originate the connection. This could be reproduced when using pod
network add-on such as Calico.
With this change, if a node matches, return it, otherwise we proceed to look for a matching pod. If exactly one running pod matches we return it. Otherwise we return just the IP.
Fixes#3103
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
### Motivation
In order to expose arbitrary headers through tap, headers and trailers should be
read from the linkerd2-proxy-api `TapEvent`s and set in the public `TapEvent`s.
This change should have no user facing changes as it just prepares the events
for JSON output in linkerd/linkerd2#3390
### Solution
The public API has been updated with a headers field for
`TapEvent_Http_RequestInit_` and `TapEvent_Http_ResponseInit_`, and trailers
field for `TapEvent_Http_ResponseEnd_`.
These values are set by reading the corresponding fields off of the proxy's tap
events.
The proto changes are equivalent to the proto changes proposed in
linkerd/linkerd2-proxy-api#33
Closes#3262
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
When running linkerd in HA mode, a cluster can be broken by bringing down the proxy-injector.
Add a label to MWC namespace selctor that skips any namespace.
Fixes#3346
Signed-off-by: hasheddan <georgedanielmangum@gmail.com>
* Update prometheus cadvisor config to only keep container resources metrics
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Drop unused large metric
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Siggy's feedback
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Trim certs and keys in the Helm charts
Fixes#3419
When installing through the CLI the installation will fail if the certs
are malformed, so this only concerns the Helm templates.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Zahari Dichev
Kevin Leimkuhler
Dax McDonald
Paul Balogh
Mayank Shah
Alex Leong
Tarun Pothulapati
Alejandro Pedraza
Andrew Seigner
Sergio C. Arteaga
Ivan Sim
Kevin Leimkuhler
Bruno M. Custódio
Daniel Mangum
arminbuerkle