THis PR addresses two problems:
- when a resync happens (or the mirror controller is restarted) we incorrectly classify the remote gateway as a mirrored service that is not mirrored anymore and we delete it
- when updating services due to a gateway update, we need to select only the services for the particular cluster
The latter fixes#4451
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
When viewing the output of `linkerd stat` for services which do not have a selector (such as services created by the service-mirror, for example) the meshed count column shows the total number which exist, even though the service actually selects no pods at all.
We update the StatSummary implementation to account for services which have no selector.
Additionally, we update the logic of the `--unmeshed` flag. When the `--unmeshed` flag is not set, we typically skip rows for unmeshed resources because those resources would have no stats. This is not appropriate to do when the `--from` flag is also set because in this case, metrics are not collected on the target resource but are instead collected on the client-side. This means that stats can be present, even for unmeshed resources and these resources should still be displayed, even if the `--unmeshed` flag is not set.
Signed-off-by: Alex Leong <alex@buoyant.io>
This change creates a gateway proxy for every gateway. This enables the probe worker to leverage the destination service functionality in order to discover the identity of the gateway.
Fix#4411
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This PR introduces a few changes that were requested after a bit of service mirror reviewing.
- we restrict the RBACs so the service mirror controller cannot read secrets in all namespaces but only in the one that it is installed in
- we unify the namespace namings so all multicluster resources are installedi n `linkerd-multicluster` on both clusters
- fixed checks to account for changes
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This change adds labels to endpoints that target remote services. It also adds a Grafana dashboard that can be used to monitor multicluster traffic.
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
When the proxy has an IP watch on a pod and the destination controller gets a pod update event, the destination controller sends a NoEndpoints message to all listeners followed by an Add with the new pod state. This can result in the proxy's load balancer being briefly empty and could result in failing requests in the period.
Since consecutive Add events with the same address will override each other, we can simply send the Adds without needing to clear the previous state with a NoEndpoints message.
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Upgrade Linkerd's base docker image to use go 1.14.2 in order to stay modern.
The only code change required was to update a test which was checking the error message of a `crypto/x509.CertificateInvalidError`. The error message of this error changed between go versions. We update the test to not check for the specific error string so that this test passes regardless of go version.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3984
We use the new `/live` admin endpoint in the Linkerd proxy for liveness probes instead of the `/metrics` endpoint. This endpoint returns a much smaller payload.
Signed-off-by: Alex Leong <alex@buoyant.io>
This fixes an issue users are experiencing when upgrading from from Linkerd
2.6 to 2.7 and use the [kubernetes-external-secrets]() project.
The change introduced by #3700 resulted in the tap service showing up in the
`/openapi/v2` API response. I confirmed this with a local build.
A dependency within the project expects the `operationID` field to be present
in the swagger definition. It is optional as stated in the
[spec](https://swagger.io/docs/specification/paths-and-operations/). It's
purpose is to identify an operation and should be unique.
This change adds that field to tap service swagger spec. While this can be
fixed in the KES dependency, it certainly does not hurt to add and other
libraries may similarly expect this field.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Here we upgrade our dependencies on client-go to 0.17.4 and smi-sdk-go to 0.3.0. Since smi-sdk-go uses client-go 0.17.4, these upgrades must be performed simultaneously.
This also requires simultaneously upgrading our dependency on linkerd/stern to a SHA which also uses client-go 0.17.4. This keeps all of our transitive dependencies synchronized on one version of client-go.
This ALSO requires updating our codegen scripts to use the 0.17.4 version of code-generator and running it to generate 0.17.4 compatible generated code. I took this opportunity to update our code generation script to properly use the version of code-generater from `go.mod` rather than a hardcoded SHA.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Bump proxy-init to v1.3.2
Bumped `proxy-init` version to v1.3.2, fixing an issue with `go.mod`
(linkerd/linkerd2-proxy-init#9).
This is a non-user-facing fix.
## Motivation
I noticed the Go language server stopped working in VS Code and narrowed it
down to `go build ./...` failing with the following:
```
❯ go build ./...
go: github.com/linkerd/stern@v0.0.0-20190907020106-201e8ccdff9c: parsing go.mod: go.mod:3: usage: go 1.23
```
This change updates `linkerd/stern` version with changes made in
linkerd/stern#3 to fix this issue.
This does not depend on #4170, but it is also needed in order to completely
fix `go build ./...`
This change removes the target port requirement when resolving ports in the dst service. Based on the comments, it seems that we need to have a target port defined in the port spec in order to resolve to the port in the Endpoints. In reality if target port is note defined when creating the service, k8s will set the port and the target port to the same value. Seems to me that checking for the targetPort to be different than 0, is a no-op.
Signed-off-by: Zahari Dichev zaharidichev@gmail.com
Unit tests that exercise most of the code in cluster_watcher.go. Essentially the whole cluster mirroring machinary can be tought of as a function that takes remote cluster state, local cluster state, and modification events and as a result it either modifies local cluster state or issues new events onto the queue. This is what these tests are trying to model. I think this covers a lot of the logic there. Any suggestions for other edge cases are welcome.
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This PR introduces a service mirroring component that is responsible for watching remote clusters and mirroring their services locally.
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Check Extension api server Authentication
* Added Checks and tests for extension api-server authentication
* Fixed Failing Static Checks
* Updated the golden file
Signed-off-by: Christy Jacob <christyjacob4@gmail.com>
Fixes#3562
When a pod in one namespace sends traffic to a service which is the apex of a traffic split in another namespace, that traffic is not displayed in the `linkerd stat trafficsplit` output. This is because when we do a Prometheus query for traffic to the traffic split, we supply a Prometheus label selector to only select traffic sources in the namespace of the traffic split.
Since any pod in any namespace can send traffic to the apex service of a traffic split, we must look at all possible sources of traffic, not just the ones in the same namespace.
Before:
```
$ bin/linkerd stat ts
NAME APEX LEAF WEIGHT SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
webapp-split webapp webapp 900m - - - - -
webapp-split webapp webapp-2 100m - - - - -
```
After:
```
$ bin/linkerd stat ts
NAME APEX LEAF WEIGHT SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
webapp-split webapp webapp 900m 80.00% 1.4rps 31ms 99ms 2530ms
webapp-split webapp webapp-2 100m 60.00% 0.2rps 35ms 93ms 99ms
```
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3332
Fixes the very rare test failure
```
--- FAIL: TestGetProfiles (0.33s)
--- FAIL: TestGetProfiles/Returns_server_profile (0.11s)
server_test.go:228: Expected 1 or 2 updates but got 3:
[retry_budget:<retry_ratio:0.2 min_retries_per_second:10
ttl:<seconds:10 > > routes:<condition:<path:<regex:"/a/b/c"
> > metrics_labels:<key:"route" value:"route1" >
timeout:<seconds:10 > > retry_budget:<retry_ratio:0.2
min_retries_per_second:10 ttl:<seconds:10 > >
routes:<condition:<path:<regex:"/a/b/c" > >
metrics_labels:<key:"route" value:"route1" >
timeout:<seconds:10 > > retry_budget:<retry_ratio:0.2
min_retries_per_second:10 ttl:<seconds:10 > > ]
FAIL
FAIL github.com/linkerd/linkerd2/controller/api/destination
0.624s
```
that occurs when a third unexpected stream update occurs, when the fake
API takes more time to notify its listeners about the resources created.
For all the nasty details check #3332
## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Subject
Utilize Common Name or Subject Alternate Name for access checks (#3459)
Problem
When access restrictions to API server have been enabled with the requestheader-allowed-names configuration, only the Common Name of the requestor certificate is being checked. This check should include the use of Subject Alternate Name attributes.
Solution
API server will now check the SAN attributes (DNS Names, Email Addresses, IP Addresses, and URIs) when determining accessibility for allowed names.
Fixes issue #3459
Signed-off-by: Paul Balogh <javaducky@gmail.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
Fixes#3444Fixes#3443
## Background and Behavior
This change adds support for the destination service to resolve Get requests which contain a service clusterIP or pod ip as the `Path` parameter. It returns the stream of endpoints, just as if `Get` had been called with the service's authority. This lays the groundwork for allowing the proxy to TLS TCP connections by allowing the proxy to do destination lookups for the SO_ORIG_DST of tcp connections. When that ip address corresponds to a service cluster ip or pod ip, the destination service will return the endpoints stream, including the pod metadata required to establish identity.
Prior to this change, attempting to look up an ip address in the destination service would result in a `InvalidArgument` error.
Updating the `GetProfile` method to support ip address lookups is out of scope and attempts to look up an ip address with the `GetProfile` method will result in `InvalidArgument`.
## Implementation
We do this by creating a `IPWatcher` which wraps the `EndpointsWatcher` and supports lookups by ip. `IPWatcher` maintains a mapping up clusterIPs to service ids and translates subscriptions to an IP address into a subscription to the service id using the underlying `EndpointsWatcher`.
Since the service name is no longer always infer-able directly from the input parameters, we restructure `EndpointTranslator` and `PodSet` so that we propagate the service name from the endpoints API response.
## Testing
This can be tested by running the destination service locally, using the current kube context to connect to a Kubernetes cluster:
```
go run controller/cmd/main.go destination -kubeconfig ~/.kube/config
```
Then lookups can be issued using the destination client:
```
go run controller/script/destination-client/main.go -path 192.168.54.78:80 -method get -addr localhost:8086
```
Service cluster ips and pod ips can be used as the `path` argument.
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
Zahari Dichev
Alex Leong
Tarun Pothulapati
Kevin Leimkuhler
Mayank Shah
Alejandro Pedraza
Christy Jacob
Dax McDonald
Paul Balogh
Sergio C. Arteaga