Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Define proxy version override annotation
* Don't override global linkerd version during inject
This ensures consistent usages of the config.linkerd.io/linkerd-version and
linkerd.io/proxy-version annotations. The former will only be used to track
overridden version, while the latter shows the cluster's current default
version.
* Rename proxy version config override annotation
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
This change adds a new `linkerd2-proxy-identity` binary to the `proxy`
container image as well as a `linkerd2-proxy-run` entrypoint script.
The inject process now sets environment variables on pods to support
identity, including identity names for the destination and identity
services.
As the proxy starts, the identity helper creates a key and CSR in a
tmpfs. As the proxy starts, it reads these files, as well as a
serviceaccount token, and provisions a certificate from controller.
The proxy's /ready endpoint will not succeed until a certificate has
been provisioned.
The proxy will not participate in identity with services other than the
controllers until the Destination controller is modified to provide
identities via discovery.
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
https://github.com/linkerd/linkerd2/pull/2521 introduces an "Identity"
controller, but there is no way to include it in linkerd installation.
This change alters the `install` flow as follows:
- An Identity service is _always_ installed;
- Issuer credentials may be specified via the CLI;
- If no Issuer credentials are provided, they are generated each time `install` is called.
- Proxies are NOT configured to use the identity service.
- It's possible to override the credential generation logic---especially
for tests---via install options that can be configured via the CLI.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
* Defined the config annotations as new constants in labels.go
* Introduced the getOverride() functions to override configs
* Introduced new accessors to abstract with type casting
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The CLI now specifies a default port, 50750, for the Linkerd dashboard.
If that port is not available, it resumes the original behavior of binding to a
free ephemeral port.
linkerd/linkerd2#1721 introduced a `--single-namespace` install flag,
enabling the control-plane to function within a single namespace. With
the introduction of ServiceProfiles, and upcoming identity changes, this
single namespace mode of operation is becoming less viable.
This change removes the `--single-namespace` install flag, and all
underlying support. The control-plane must have cluster-wide access to
operate.
A few related changes:
- Remove `--single-namespace` from `linkerd check`, this motivates
combining some check categories, as we can always assume cluster-wide
requirements.
- Simplify the `k8s.ResourceAuthz` API, as callers no longer need to
make a decision based on cluster-wide vs. namespace-wide access.
Components either have access, or they error out.
- Modify the web dashboard to always assume ServiceProfiles are enabled.
Reverts #1721
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
It's sometimes helpful to spotcheck proxy metrics from a specific pod,
but doing so with kubectl requires a few steps.
Introduce a new `linkerd metrics` command. When given a pod name and
namespace, returns a dump of the proxy's /metrics endpoint.
Also modify the k8s.portforward module to accept initialized k8s config
and client objects, to enable testing.
Fixes#2350.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2349 removed the `--single-namespace` flag, in favor of
runtime detection of cluster vs. namespace access, and also
ServiceProfile availability. This maintained control-plane support for
running in these two states.
This change requires control-plane components have cluster-wide
Kubernetes API access and ServiceProfile availability, and will error
out if not. Once #2349 merges, stage 1 install will be a requirement for
a successful stage 2 install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2377
In inject's ResourceConfig, renamed objMeta to podMeta since
it really points to the pod template metadata. And created a new field
workloadMeta that really points to the main workload (e.g. Deployment) metadata.
Refactored uninject to clean up the labels at both podMeta and
workloadMeta. Also it will remove all the labels and annotations that
start with "linkerd.io" except for the "linkerd.io/inject" annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `linkerd-init` container requires the NET_ADMIN capability to modify
iptables. The `linkerd check` command was not verifying this.
Introduce a `has NET_ADMIN capability` check, which does the following:
1) Lists all available PodSecurityPolicies, if none found, returns
success
2) For each PodSecurityPolicy, validate one exists that:
- the user has `use` access AND
- provides `*` or `NET_ADMIN` capability
A couple limitations to this approach:
- It is testing whether the user running `linkerd check` has NET_ADMIN,
but during installation time it will be the `linkerd-init` pod that
requires NET_ADMIN.
- It assumes the presense of PodSecurityPolicies in the cluster means
the PodSecurityPolicy admission controller is installed. If the
admission controller is not installed, but PSPs exists that restrict
NET_ADMIN, `linkerd check` will incorrectly report the user does not
have that capability.
This PR also fixes the `can create CustomResourceDefinitions` check to
not specify a namespace when doing a `create` check, as CRDs are
cluster-wide.
Fixes#1732
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
The control-plane components relied on a `--single-namespace` param,
passed from `linkerd install` into each individual component, to
determine which namespaces they were authorized to access, and whether
to support ServiceProfiles. This command-line flag was redundant given
the authorization rules encoded in the parent `linkerd install` output,
via [Cluster]Role[Binding]s.
Modify the control-plane components to query Kubernetes at startup to
determine which namespaces they are authorized to access, and whether
ServiceProfile support is available. This allows removal of the
`--single-namespace` flag on the components.
Also update `bin/test-cleanup` to cleanup the ServiceProfile CRD.
TODO:
- Remove `--single-namespace` flag on `linkerd install`, part of #2164
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Consolidate timeouts for `linkerd check`
- Moved the creation of contexts from inside the methods targeted by the
checks into a single place in the runCheck() and runCheckRPC() methods
where the context is built using a hard-coded timeout of 30 seconds.
- k8s' client-go doesn't allow passing along contexts, but it let's us
setting the Timeout manually.
- Reworded the description for the --wait option.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Since 37ae423, deployments have been prefixed with linkerd-; however
the inject logic was not changed to take this into consideration when
constructing the controller's identity.
This means that the proxy's client to the control plane has been unable to
establish TLS'd communcation to the proxy-api. Previously, the proxy would
silently fall back to plaintext, but in master this behavior recently changed to
be stricter, so this bug will prevent the proxy from connecting to proxy-api
in any way.
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
linkerd/website#105 introduced a FAQ page, providing resolutions for all
`linkerd check` failures.
Update each check to reference its corresponding section in the FAQ.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Use `ca.NewCA()` for generating certs and keys for the proxy injector
- Remove from CA controller everything that dealt with the
webhook/proxy-injector
- Remove no longer needed proxy-injector volumes for 'trust-anchors' and
'webhook-secrets'
- Remove from the proxy-injector the retrieval of the trust anchor and
secrets
- tls flag during install is no longer needed for auto-inject to work
Fixes#2095 and fixes#2166
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
Add `linkerd uninject` command
uninject.go iterates through the resources annotations, labels,
initContainers and Containers, removing what we know was injected by
linkerd.
The biggest part of this commit is the refactoring of inject.go, to make
it more generic and reusable by uninject.
The idea is that in a following PR this functionality will get reused by
`linkerd inject` to uninject as as preliminary step to injection, as a
solution to #1970.
This was tested successfully on emojivoto with:
```
1) inject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd inject - |
kubectl apply -f -
2) uninject:
kubectl get -n emojivoto deployment -o yaml | bin/linkerd uninject - |
kubectl apply -f -
```
Also created unit tests for uninject.go. The fixture files from the inject
tests could be reused. But as now the input files act as outputs, they
represent existing resources and required these changes (that didn't
affect inject):
- Rearranged fields in alphabetical order.
- Added fields that are only relevant for existing resources (e.g.
creationTimestamp and status.replicas in StatefulSets)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor util.BuildResource so it can deal with multiple resources
First step to address #1487: Allow stat summary to query for multiple
resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update the stat cli help text to explain the new multi resource querying ability
Propsal for #1487: Allow stat summary to query for multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow stat summary to query for multiple resources
Implement this ability by issuing parallel requests to requestStatsFromAPI()
Proposal for #1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update tests as part of multi-resource support in `linkerd stat` (#1487)
- Refactor stat_test.go to reuse the same logic in multiple tests, and
add cases and files for json output.
- Add a couple of cases to api_utils_test.go to test multiple resources
validation.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` called with multiple resources should keep an ordering (#1487)
Add SortedRes holding the order of resources to be followed when
querying `linkerd stat` with multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Extra validations for `linkerd stat` with multiple resources (#1487)
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` resource grouping, ordering and name prefixing (#1487)
- Group together stats per resource type.
- When more than one resource, prepend name with type.
- Make sure tables always appear in the same order.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow `linkerd stat` to be called with multiple resources
A few final refactorings as per code review.
Fixes#1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
This commit removes duplicate logic that loads Kubernetes config and
replaces it with GetConfig from pkg/k8s. This also allows to load
config from default sources like $KUBECONFIG instead of explicitly
passing -kubeconfig option to controller components.
Signed-off-by: Igor Zibarev <zibarev.i@gmail.com>
Updates to the Kubernetes utility code in `/controller/k8s` to support interacting with ServiceProfiles.
This makes use of the code generated client added in #1752
Signed-off-by: Alex Leong <alex@buoyant.io>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
* Added --context flag to specify the context to use to talk to the Kubernetes apiserver
* Fix tests that are failing
* Updated context flag description
Signed-off-by: Darko Radisic <ffd2subroutine@users.noreply.github.com>
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Closes#1170.
This branch adds a `-o wide` (or `--output wide`) flag to the Tap CLI.
Passing this flag adds `src_res` and `dst_res` elements to the Tap
output, as described in #1170. These use the metadata labels in the tap
event to describe what Kubernetes resource the source and destination
peers belong to, based on what resource type is being tapped, and fall
back to pods if either peer is not a member of the specified resource
type.
In addition, when the resource type is not `namespace`, `src_ns` and
`dst_ns` elements are added, which show what namespaces the the source
and destination peers are in. For peers which are not in the Kubernetes
cluster, none of these labels are displayed.
The source metadata added in #1434 is used to populate the `src_res` and
`src_ns` fields.
Also, this branch includes some refactoring to how tap output is
formatted.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Create a ephemeral, in-memory TLS certificate authority and integrate it into the certificate distributor.
Remove the re-creation of deleted ConfigMaps; this will be added back later in #1248.
Signed-off-by: Brian Smith brian@briansmith.org
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
* Add TLS support to `conduit inject`.
Add the settings needed to enable TLs when `--tls=optional` is passed on the
commend line. Later the requirement to add `--tls` will be removed.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Update dest service with a different tls identity strategy
* Send controller namespace as separate field
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* dest service: close open streams on shutdown
* Log instead of print in pkg packages
* Convert ServerClose to a receive-only channel
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, in conduit stat all we would just print the map of stat results, which
resulted in the order in which stats were displayed varying between prints.
Fix:
Define an array, k8s.StatAllResourceTypes and use the order in this array to print
the map; ensuring a consistent print order every time the command is run.
Allow the Stat endpoint in the public-api to accept requests for resourceType "all".
Currently, this queries Pods, Deployments, RCs and Services, but can be modified
to query other resources as well.
Both the CLI and web endpoints now work if you set resourceType to all.
e.g. `conduit stat all`
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `stat` command did not support `service` as a resource type.
This change adds `service` support to the `stat` command. Specifically:
- as a destination resource on `--to` commands
- as a target resource on `--from` commands
Fixes#805
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Destination service does not provide ReplicaSet information to the
proxy.
The `pod-template-hash` label approximates selecting over all pods in a
ReplicaSet or ReplicationController. Modify the Destination service to
provide this label to the proxy.
Relates to #508 and #741
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The inject code detects the object it is being injected into, and writes
self-identifying information into the CONDUIT_PROMETHEUS_LABELS
environment variable, so that conduit-proxy may read this information
and report it to Prometheus at collection time.
This change puts the self-identifying information directly into
Kubernetes labels, which Prometheus already collects, removing the need
for conduit-proxy to be aware of this information. The resulting label
in Prometheus is recorded in the form `k8s_deployment`.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Applies timeout of 5s to check request contexts. This overrides
30s timeout applied at client transport level, and stops the
conduit check command from taking > 90s to complete.
Fixes#553
Signed-off-by: Andy Hume <andyhume@gmail.com>
Kubernetes $KUBECONFIG environment variable is a list of paths to
configuration files, but conduit assumes that it is a single path.
Changes in this commit introduce a straightforward way to discover and
load config file(s).
Complete list of changes:
- Use k8s.io/client-go/tools/clientcmd to deal with kubernetes
configuration file
- rename k8s API and k8s proxy constructors to get rid of redundancy
- remove shell package as it is not needed anymore
Signed-off-by: Igor Zibarev <zibarev.i@gmail.com>
* Remove kubectl dependency, validate k8s server version via api
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove unused MockKubectl
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remame kubectl.go to version.go
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The conduit dashboard command asychronously shells out and runs "kubectl
proxy".
This change replaces the shelling out with calls to kubernetes proxy
APIs. It also allows us to enable race detection in our go tests, as the
shell out code tests did not pass race detection.
Fixes#173
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The conduit.io/* k8s labels and annotations we're redundant in some
cases, and not flexible enough in others.
This change modifies the labels in the following ways:
`conduit.io/plane: control` => `conduit.io/controller-component: web`
`conduit.io/controller: conduit` => `conduit.io/controller-ns: conduit`
`conduit.io/plane: data` => (remove, redundant with `conduit.io/controller-ns`)
It also centralizes all k8s labels and annotations into
pkg/k8s/labels.go, and adds tests for the install command.
Part of #201
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Allow external controller public api clients that don't rely on a kubeconfig to interact with Conduit CLI
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Move healthcheck proto to separate file, use throughout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove Check message from healthcheck.proto
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Standardize healthcheck protobuf import name
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Abstract Conduit API client from protobuf interface to add new features
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Consolidate mock api clients
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple implementation of healthcheck for conduit api
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Change NextSteps to FriendlyMessageToUser
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add grpc check for status on the client
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple server-side check for Conduit API
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Fix feedback from PR
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Sort imports
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Upgrade k8s.io/client-go to v6.0.0
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Make k8s store initialization blocking with timeout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename constructor functions from MakeXyz to NewXyz
As it is more commonly used in the codebase
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make Conduit client depend on KubernetesAPI
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move Conduit client and k8s logic to standard go package dir for internal libs
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move dependencies to /pkg
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make conduit client more testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Remove unused config object
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add more test cases for marhsalling
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move client back to controller
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Sort imports
Signed-off-by: Phil Calcado <phil@buoyant.io>
Alejandro Pedraza
Ivan Sim
Oliver Gould
Carol A. Scott
Andrew Seigner
Tarun Pothulapati
Yan
Kevin Lingerfelt
zak
Radu M
Igor Zibarev
Alex Leong
Darko Radisic
Alena Varkockova
Eliza Weisman
Brian Smith
Risha Mars
Thomas Rampelberg
Andy Hume
Dennis Adjei-Baah
Phil Calçado