Our build instructions were scattered across a few README's.
This consolidates all instructions relevant to Conduit development into
a single BUILD.md.
Fixes#134
Signed-off-by: Andrew Seigner <andrew@sig.gy>
* Abstract Conduit API client from protobuf interface to add new features
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Consolidate mock api clients
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple implementation of healthcheck for conduit api
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Change NextSteps to FriendlyMessageToUser
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add grpc check for status on the client
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add simple server-side check for Conduit API
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Fix feedback from PR
Signed-off-by: Phil Calcado <phil@buoyant.io>
* add ability to add flash to latest datapoint on line graph based on passed down prop.
- added flash to all graphs except the sparklines
Signed-off-by: Franziska von der Goltz <franziska@vdgoltz.eu>
* Add /paths page that shows rollup metrics by path
* Clean up ApiHelpers a bit
Adds ability to sort by column in the tabbed metrics table (to make a TabbedMetricsTable sortable, set sortable={true})
Adds a page, accessible via /paths that shows a table of all paths, with their request/success/latency metrics. I haven't exposed it in the sidebar as it doesn't have design treatment.
See #132. This PR adds a protocol field to the ClientTransport and ServerTransport messages, and modifies the proxy to report a value for this field (currently, it's only ever HTTP).
Currently, HTTP/1 and HTTP/2 are collapsed into one Protocol variant, see #132 (comment). I expect that we can treat H1 as a subset of H2 as far as metrics goes.
Note that after discussing it with @klingerf, I learned that the control plane telemetry API currently does not do anything with the ClientTransport and ServerTransport messages, so beyond regenerating the protobuf-generated code, no controller changes were actually necessary. As we actually add metrics to TCP transports, we'll want to make some additions to the telemetry API to ingest these metrics. If any metrics are shared between HTTP and raw TCP transports (say, bytes sent), we'll want to differentiate between them in Prometheus. All the metrics that the control plane currently ingests from telemetry reports are likely to be HTTP-specific (requests, responses, response latencies), or at least, do not apply to raw TCP.
Actually adding metrics to raw TCP transports will probably have to wait until there are raw TCP transports implemented in the proxy...
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* Sort imports
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Upgrade k8s.io/client-go to v6.0.0
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Make k8s store initialization blocking with timeout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously if dependencies changed but dep image SHAs were not updated,
the build could succeed, creating docker images with indeterminate
dependencies.
This change checks the dependency image SHAs hard-coded in Dockerfile's
against the current source tree. If the SHAs do not match, the build
fails.
Fixes#118
Signed-off-by: Andrew Seigner <andrew@sig.gy>
* Upgrade ant to 3.1.0
* Adjust styles for updated ant
- Locale is enUS by default now, so removing our config
- Adjust table styles
* Upgrade react and react-dom to 16.2.0
* Upgrade enzyme to 3.3.0, fix tests accordingly
The existing startup/shutdown log info messages had spacing issues and
used fmt.
Update the log messages to use logrus for consistency, and fix spacing
issues.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
We have example commands for building our go components locally, but we
did not mention a prerequisite step of getting all dependencies.
Add note to run `dep ensure && dep prune`.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
The image tags for gcr.io/runconduit/go-deps and
gcr.io/runconduit/proxy-deps were not updating to account for all
changes in those images.
Modify SHA generation to include all files that affect the base
dependency images. Also add instructions to README.md for updating
hard-coded SHAs in Dockerfile's.
Fixes#115
Signed-off-by: Andrew Seigner <andrew@sig.gy>
Because whether or not to build a new deps image is based on the SHA of Cargo.lock, changes to the deps Dockerfile will not cause a new deps image to be built. Because of this, the current proxy deps Docker image is based on the wrong Rust version, breaking the build. See #115 for details on this issue.
I've appended a newline to Cargo.lock to change the lockfile's SHA and trigger a rebuild of the deps Docker image on CI. I've also added a comment in the Dockerfile noting that it is necessary to do this when changing that file.
Signed-off-by: Eliza Weisman eliza@buoyant.io
The web README.md mentions running locally, but it's not explicit about
how to connect to public-api.
Add notes on various ways to connect a local web to a public-api
process.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
After merging #104, Conduit will not build against pre-1.23 Rust versions. This PR updates the Dockerfile to require this version. This should fix the build on master.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Since the methods on this trait were moved to direct implementations on the
implementing types, this produces an unused import warning with the latest
(1.23) Rust standard library. As we set `deny(warnings)`, this breaks the build.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* Rename constructor functions from MakeXyz to NewXyz
As it is more commonly used in the codebase
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make Conduit client depend on KubernetesAPI
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move Conduit client and k8s logic to standard go package dir for internal libs
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move dependencies to /pkg
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make conduit client more testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Remove unused config object
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add more test cases for marhsalling
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Move client back to controller
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Sort imports
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make TabbedMetricsTable in charge of fetching timeseries
All of the parent components in charge of fetching timeseries data
don't actually use them, but pass them to this table. It would simplify
a lot of the parents if this component handled the ts fetching too.
This introduces a urlsForResource helper in ApiHelpers to allow
us to consolidate url generating in the app to one place. It also
associates the appropriate groupBy for various fetches.
Signed-off-by: Risha Mars <mars@buoyant.io>
Previously Conduit would render an iframe, received from
versioncheck.conduit.io.
Modify the client to retrieve the latest released version, via CORS.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
Previously there was a default controller URL in the proxy. This
default was never used for any proxy injected by `conduit inject` and
it was the wrong default when using the proxy outside of Kubernetes.
Also more generally this is such an important setting in terms of
correctness and security that it was dangerous to let it be implied in
any context.
Remove the default, requiring that it be set in order for the proxy to
start.
Cobra supports bash and zsh completion code generation, but our cli
project was not leveraging it.
Add a 'completion' command to the conduit cli, which outputs bash and
zsh completion code.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
* Add framework for healthcheck in CLI
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add self-checked for kubectl
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Clear formatting code
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Removed ununsed objects from status
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Removed ununsed parameter
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Ignore errored self checkers
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make the check error by default
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Log error, format changes
Signed-off-by: Phil Calcado <phil@buoyant.io>
README.md currently documents how to get started with a released version
of Conduit, but not how to build and deploy from source.
This change adds a section to enable building and deploying from source,
it assumes working Go and Minikube environments.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
We need to address the flaky checks, but for now it is better to have these skipped than a build with false negatives.
Signed-off-by: Phil Calcado <phil@buoyant.io>
The README.md in the Web project describes building and running the Web
service locally, against a public API server in Docker.
Add instructions for running the Web Service locally against a public
API Server in Kubernetes.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
* Add func to rsolve kubectl-like names to canonical names
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Refactor API instantiation
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make version command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make get command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add tests for api utils
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make stat command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make tap command testablë
Signed-off-by: Phil Calcado <phil@buoyant.io>
Previously the destinations service would look for services in the
"default" namespace if the service name didn't have at least two
labels. However, the "default" namespace is almost always the wrong
namespace. The only reasonable default namespace is the namespace of
the client service, which isn't given to the destinations service.
Therefore it shouldn't try to default the namespace.
Accordingly, stop defaulting the namespace to "default".
Validated by manually testing the emojivoto service before and after
the proxy implemented namespace defaulting itself.
* add silent exits on all conduit commands
* Revert "add silent exits on all conduit commands"
This reverts commit 07488ca
* adds back a change that was accidentally removed on revert
* Stop printing errors to stderr
* Have better empty states in Deployment Detail and Pod Detail
* Fix call to action on deployment detail page
Adds various checks to hide sections of pages that don't have data:
* Removes the timeseries graphs and latency overview from Deployment/Pod
detail if there are no metrics for it
* Removes the Upstreams/Downstreams if num upstreams / downstreams is 0
* Removes the pod barcharts from the Deployment detail if there are no pods
* If there are no pod metrics, populate the list of pods from /pods
These changes strip the pod detail view down a lot if there's no pod data, but that might be fine
* Move kubectl logis to k8s package
* Made kubectl return *url.URL, just like API
* Make k8s API code respect /Users/pcalcado/.kube/config (closes#17)
* Fix style mistakes and typos
Andrew Seigner
Zhu Guihua
Phil Calçado
Franziska von der Goltz
Risha Mars
Eliza Weisman
Kevin Lingerfelt
Dennis Adjei-Baah
clemensw
Christopher Schmidt
Brian Smith
Sky Ao
Sean McArthur