CLI crashes if linkerd-config contains unexpected values.
Add a safe accessor that initializes an empty Global on the first
access. Refactor all accesses to use the newly introduced accessor using
gopls.
Add test for linkerd-config data without Global.
Fixes#5215
Co-authored-by: Itai Schwartz <yitai27@gmail.com>
Signed-off-by: Hod Bin Noon <bin.noon.hod@gmail.com>
Per #5165, Kubernetes does not necessarily limit the proxy's access to
cores via `cgroups` when a CPU limit is set. As of #5168, the proxy now
supports a `LINKERD2_PROXY_CORES` environment configuration that
augments CPU detection from the host operating system.
This change modifies the proxy injector to ensure that this environment
is configured from the `Values.proxy.cores` Helm value, the
`config.linkerd.io/proxy-cpu-limit` annotation, and the `--proxy-cpu-limit`
install flag.
* charts: Do not store .component in linkerd-config
This removes the `.component` fields from `Values.go` and also prevents them from being emitted into `linkerd-config` by attaching them into a temporary variable during injection.
This also simplies inbound and outbound Skip ports helm logic and adds quotes to them.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#5118
This PR adds a new supported value for the `linkerd.io/inject` annotation. In addition to `enabled` and `disabled`, this annotation may now be set to `ingress`. This functions identically to `enabled` but it also causes the `LINKERD2_PROXY_INGRESS_MODE="true"` environment variable to be set on the proxy. This causes the proxy to operate in ingress mode as described in #5118
With this set, ingresses are able to properly load service profiles based on the l5d-dst-override header.
Signed-off-by: Alex Leong <alex@buoyant.io>
In #5110 the `global.proxy.destinationGetNetworks` configuration is
renamed to `global.clusterNetworks` to better reflect its purpose.
The `config.linkerd.io/proxy-destination-get-networks` annotation allows
this configuration to be overridden per-workload, but there's no real use
case for this. I don't think we want to support this value differing
between pods in a cluster. No good can come of it.
This change removes support for the `proxy-destination-get-networks`
annotation.
There is no longer a proxy config `DESTINATION_GET_NETWORKS`. Instead of
reflecting this implementation in our values.yaml, this changes this
variable to the more general `clusterNetworks` to emphasize its
similarity to `clusterDomain` for the purposes of discovery.
This is a major refactor of the install/upgrade code which removes the config protobuf and replaces it with a config overrides secret which stores overrides to the values struct. Further background on this change can be found here: https://github.com/linkerd/linkerd2/discussions/4966
Note: as-is this PR breaks injection. There is work to move injection onto a Values-based config which must land before this can be merged.
A summary of the high level changes:
* the install, global, and proxy fields of linkerd-config ConfigMap are no longer populated
* the CLI install flow now follows these simple steps:
* load default Values from the chart
* update the Values based on the provided CLI flags
* render the chart with these values
* also render a Secret/linkerd-config-overrides which describes the values which have been changed from their defaults
* the CLI upgrade flow now follows these simple stesp:
* load the default Values from the chart
* if Secret/linkerd-config-overrides exists, apply the overrides onto the values
* otherwise load the legacy ConfigMap/linkerd-config and use it to updates the values
* further update the values based on the provided CLI flags
* render the chart and the Secret/linkerd-config-overrides as above
* Helm install and upgrade is unchanged
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
## Motivation
Closes#4950
## Solution
Add the `config.linkerd.io/opaque-ports` annotation to either a namespace or pod
spec to set the proxy `LINKERD2_PROXY_INBOUND_PORTS_DISABLE_PROTOCOL_DETECTION`
environment variable.
Currently this environment variable is not used by the proxy, but will be
addressed by #4938.
## Valid values
Ports: `config.linkerd.io/opaque-ports: 4322,3306`
Port ranges: `config.linkerd.io/opaque-ports: 4320-4325`
Mixed ports and port ranges: `config.linkerd.io/opaque-ports: 4320-4325`
If the pod has named ports such as:
```
- name: nginx
image: nginx:latest
ports:
- name: nginx-port
containerPort: 80
protocol: TCP
```
The name can also be used as a value: `config.linkerd.io/opaque-ports:
nginx-port`
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
* support overriding inbound and outbound connect timeouts.
* add validation on user provided TCP connect timeouts
* convert valid time values into ms
Signed-off-by: Matt Miller <mamiller@rosettastone.com>
Using following command the wrong spelling were found and later on
fixed:
```
codespell --skip CHANGES.md,.git,go.sum,\
controller/cmd/service-mirror/events_formatting.go,\
controller/cmd/service-mirror/cluster_watcher_test_util.go,\
SECURITY_AUDIT.pdf,.gcp.json.enc,web/app/img/favicon.png \
--ignore-words-list=aks,uint,ans,files\' --check-filenames \
--check-hidden
```
Signed-off-by: Suraj Deshmukh <surajd.service@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
This change modifies the linkerd-gateway component to use the inbound
proxy, rather than nginx, for gateway. This allows us to detect loops and
propagate identity through the gateway.
This change also cleans up port naming to `mc-gateway` and `mc-probe`
to resolve conflicts with Kubernetes validation.
---
* proxy: v2.99.0
The proxy can now operate as gateway, routing requests from its inbound
proxy to the outbound proxy, without passing the requests to a local
application. This supports Linkerd's multicluster feature by adding a
`Forwarded` header to propagate the original client identity and assist
in loop detection.
---
* Add loop detection to inbound & TCP forwarding (linkerd/linkerd2-proxy#527)
* Test loop detection (linkerd/linkerd2-proxy#532)
* fallback: Unwrap errors recursively (linkerd/linkerd2-proxy#534)
* app: Split inbound/outbound constructors into components (linkerd/linkerd2-proxy#533)
* Introduce a gateway between inbound and outbound (linkerd/linkerd2-proxy#540)
* gateway: Add a Forwarded header (linkerd/linkerd2-proxy#544)
* gateway: Return errors instead of responses (linkerd/linkerd2-proxy#547)
* Fail requests that loop through the gateway (linkerd/linkerd2-proxy#545)
* inject: Support config.linkerd.io/enable-gateway
This change introduces a new annotation,
config.linkerd.io/enable-gateway, that, when set, enables the proxy to
act as a gateway, routing all traffic targetting the inbound listener
through the outbound proxy.
This also removes the nginx default listener and gateway port of 4180,
instead using 4143 (the inbound port).
* proxy: v2.100.0
This change modifies the inbound gateway caching so that requests may be
routed to multiple leaves of a traffic split.
---
* inbound: Do not cache gateway services (linkerd/linkerd2-proxy#549)
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When injecting a Cronjob with no
`spec.jobTemplate.spec.template.metadata` we were getting the following
error:
```
Error transforming resources: jsonpatch add operation does not apply:
doc is missing path:
"/spec/jobTemplate/spec/template/metadata/annotations"
```
This only happens to Cronjobs because other workloads force having at
least a label there that is used in `spec.selector` (at least as of v1
workloads).
With this fix, if no metadata is detected, then we add it in the json patch when
injecting, prior to adding the injection annotation.
I've added a couple of new unit tests, one that verifies that this
doesn't remove metadata contents in Cronjobs that do have that metadata,
and another one that tests injection in Cronjobs that don't have
metadata (which I verified it failed prior to this fix).
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Inject preStop hook into the proxy sidecar container to stop it last
This commit adds support for a Graceful Shutdown technique that is used
by some Kubernetes administrators while the more perspective
configuration is being discussed in
https://github.com/kubernetes/kubernetes/issues/65502
The problem is that RollingUpdate strategy does not guarantee that all
traffic will be sent to a new pod _before_ the previous pod is removed.
Kubernetes inside is an event-driven system and when a pod is being
terminating, several processes can receive the event simultaneously.
And if an Ingress Controller gets the event too late or processes it
slower than Kubernetes removes the pod from its Service, users requests
will continue flowing into the black whole.
According [to the documentation](https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods)
> 1. If one of the Pod’s containers has defined a `preStop` hook,
> it is invoked inside of the container. If the `preStop` hook is still
> running after the grace period expires, step 2 is then invoked with
> a small (2 second) extended grace period.
>
> 2. The container is sent the `TERM` signal. Note that not all
> containers in the Pod will receive the `TERM` signal at the same time
> and may each require a preStop hook if the order in which
> they shut down matters.
This commit adds support for the `preStop` hook that can be configured
in three forms:
1. As command line argument `--wait-before-exit-seconds` for
`linkerd inject` command.
2. As `linkerd2` Helm chart value `Proxy.WaitBeforeExitSeconds`.
2. As `config.alpha.linkerd.io/wait-before-exit-seconds` annotation.
If configured, it will add the following preHook to the proxy container
definition:
```yaml
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep {{.Values.Proxy.WaitBeforeExitSeconds}}
```
To achieve max benefit from the option, the main container should have
its own `preStop` hook with the `sleep` command inside which has
a smaller period than is set for the proxy sidecar. And none of them
must be bigger than `terminationGracePeriodSeconds` configured for the
entire pod.
An example of a rendered Kubernetes resource where
`.Values.Proxy.WaitBeforeExitSeconds` is equal to `40`:
```yaml
# application container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 20
# linkerd-proxy container
lifecycle:
preStop:
exec:
command:
- /bin/bash
- -c
- sleep 40
terminationGracePeriodSeconds: 160 # for entire pod
```
Fixes#3747
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
* rework annotations doc generation from godoc parsing to map[string]string and get rid of unused yaml tags
* move annotations doc function from pkg/k8s to cli/cmd
Signed-off-by: StupidScience <tonysignal@gmail.com>
* Add cmd to inject debug sidecar for l5d components only
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Revert "Add cmd to inject debug sidecar for l5d components only"
This reverts commit 50b8b3577e.
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Stop uninjecting metadata from control plane components
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Ensure inject can be run on control plane components only if --manual is present
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Add inject support for namespaces(Fix#3255)
* Add relevant unit tests (including overridden annotations)
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Check for Namespace level config override annotations
* Add unit tests for namespace level config overrides
* add integration test for namespace level config override
* use different namespace for override tests
* check resource requests for integration tests
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This commit refactors the changes introduced by #2842 where the debug
container spec is created in the 'cli' and 'pkg' packages. This change
follows the existing pattern of annotating the YAML in the CLI code,
and injecting the sidecar spec in the shared library.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This new annotation is used by the proxy injector to determine if the
debug container needs to be injected.
When using 'linkerd install', the 'pkg/inject' library will only inject
annotations into the workload YAML. Even though 'conf.debugSidecar'
is set in the CLI, the 'injectPodSpec()' function is never invoked on
the proxy injector side. Once the workload YAML got picked up by the
proxy injector, 'conf.debugSidecar' is already nil, since it's a different,
new 'conf' object. The new annotation ensures that the proxy injector
injects the debug container.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
hodbn
Oliver Gould
Tarun Pothulapati
Alex Leong
Kevin Leimkuhler
Matt Miller
cpretzer
Suraj Deshmukh
Naseem
Zahari Dichev
Alejandro Pedraza
Paul Balogh
Mayank Shah
Eugene Glotov
Sergio C. Arteaga
StupidScience
Ivan Sim
陈谭军
Alena Varkockova
Kevin Leimkuhler
Cody Vandermyn