### What
When a namespace has the opaque ports annotation, pods and services should
inherit it if they do not have one themselves. Currently, services do this but
pods do not. This can lead to surprising behavior where services are correctly
marked as opaque, but pods are not.
This changes the proxy-injector so that it now passes down the opaque ports
annotation to pods from their namespace if they do not have their own annotation
set. Closes#5736.
### How
The proxy-injector webhook receives admission requests for pods and services.
Regardless of the resource kind, it now checks if the resource should inherit
the opaque ports annotation from its namespace. It should inherit it if the
namespace has the annotation but the resource does not.
If the resource should inherit the annotation, the webhook creates an annotation
patch which is only responsible for adding the opaque ports annotation.
After generating the annotation patch, it checks if the resource is injectable.
From here there are a few scenarios:
1. If no annotation patch was created and the resource is not injectable, then
admit the request with no changes. Examples of this are services with no OP
annotation and inject-disabled pods with no OP annotation.
2. If the resource is a pod and it is injectable, create a patch that includes
the proxy and proxy-init containers—as well as any other annotations and
labels.
3. The above two scenarios lead to a patch being generated at this point, so no
matter the resource the patch is returned.
### UI changes
Resources are now reported to either be "injected", "skipped", or "annotated".
The first pass at this PR worked around the fact that injection reports consider
services and namespaces injectable. This is not accurate because they don't have
pod templates that could be injected; they can however be annotated.
To fix this, an injection report now considers resources "annotatable" and uses
this to clean up some logic in the `inject` command, as well as avoid a more
complex proxy-injector webhook.
What's cool about this is it fixes some `inject` command output that would label
resources as "injected" when they were not even mutated. For example, namespaces
were always reported as being injected even if annotations were not added. Now,
it will properly report that a namespace has been "annotated" or "skipped".
### Tests
For testing, unit tests and integration tests have been added. Manual testing
can be done by installing linkerd with `debug` controller log levels, and
tailing the proxy-injector's app container when creating pods or services.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This adds namespace inheritance of the opaque ports annotation to services.
This means that the proxy injector now watches services creation in a cluster.
When a new service is created, the webhook receives an admission request for
that service and determines whether a patch needs to be created.
A patch is created if the service does not have the annotation, but the
namespace does. This means the service inherits the annotation from the
namespace.
A patch is not created if the service and the namespace do not have the
annotation, or the service has the annotation. In the case of the service having
the annotation, we don't even need to check the namespace since it would not
inherit it anyways.
If a namespace has the annotation value changed, this will not be reflected on
the service. The service would need to be recreated so that it goes through
another admission request.
None of this applies to the `inject` command which still skips service
injection. We rely on being able to check the namespace annotations, and this is
only possible in the proxy injector webhook when we can query the k8s API.
Closes#5737
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
* values: removal of .global field
Fixes#5425
With the new extension model, We no longer need `Global` field
as we don't rely on chart dependencies anymore. This helps us
further cleanup Values, and make configuration more simpler.
To make upgrades and the usage of new CLI with older config work,
We add a new method called `config.RemoveGlobalFieldIfPresent` that
is used in the upgrade and `FetchCurrentConfiguration` paths to remove
global field and attach its child nodes if global is present. This is verified
by the `TestFetchCurrentConfiguration`'s older test that has the global
field.
We also don't yet remove .global in some helm stable-upgrade tests for
the initial install to work.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Closes#5545.
This change moves all tap and tap-injector code into the viz directory.
The tap and tap-injector components now also use a new tap image—separating
these components from the controller image that they are currently part of. This
means the controller image has removed all its build dependencies related to
tap.
Finally, the tap Protobuf has been separated from the metrics-api and moved into
it's own `.proto` file and gen directory. This introduces a clear split between
metrics-api and tap Protobuf.
There is no change in behavior for the `viz tap` command.
### Reviewing
#### Docker images
All the bin directory scripts should be updated to build and load the tap image.
All the CI workflows should be updated to build and push the tap image.
#### Controller and pkg directories
This is primarily deletions. Most of the deleted code in this directory is now
in the tap directory of the Viz extension.
#### viz/tap
This is the location that all the tap related code now lives in. New files are
mostly moved from the controller and pkg directories. Imports have all been
updated to point at the right locations and Protobuf.
The Protobuf here is taken from metrics-api and contains all tap-related
Protobuf.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Fixes#5385
## The problems
- `linkerd install --ha` isn't honoring flags
- `linkerd upgrade --ha` is overridding existing configs silently or failing with an error
- *Upgrading HA instances from before 2.9 to version 2.9.1 results in configs being overridden silently, or the upgrade fails with an error*
## The cause
The change in #5358 attempted to fix `linkerd install --ha` that was only applying some of the `values-ha.yaml` defaults, by calling `charts.NewValues(true)` and merging that with the values built from `values.yaml` overriden by the flags. It turns out the `charts.NewValues()` implementation was by itself merging against `values.yaml` and as a result any flag was getting overridden by its default.
This also happened when doing `linkerd upgrade --ha` on an existing instance, which could result in silently overriding settings, or it could also fail loudly like for example when upgrading set up that has an external issuer (in this case the issuer cert won't be able to be read during upgrade and an error would occur as described in #5385).
Finally, when doing `linkerd upgrade` (no --ha flag) on an HA install from before 2.9 results in configs getting overridden as well (silently or with an error) because in order to generate the `linkerd-config-overrides` secret, the original install flags are retrieved from `linkerd-config` via the `loadStoredValuesLegacy()` function which then effectively ends up performing a `linkerd upgrade` with all the flags used for `linkerd install` and falls into the same trap as above.
## The fix
In `values.go` the faulting merging logic is not used anymore, so now `NewValues()` only returns the default values from `values.yaml` and doesn't require an argument anymore. It calls `readDefaults()` which now only returns the appropriate values depending on whether we're on HA or not.
There's a new function `MergeHAValues()` that merges `values-ha.yaml` into the current values (it doesn't look into `values.yaml` anymore), which is only used when processing the `--ha` flag in `options.go`.
## How to test
To replicate the issue try setting a custom setting and check it's not applied:
```bash
linkerd install --ha --controller-log level debug | grep log.level
- -log-level=info
```
## Followup
This wasn't caught because we don't have HA integration tests. Now that our test infra is based on k3d, it should be easy to make such a test using a cluster with multiple nodes. Either that or issuing `linkerd install --ha` with additional configs and compare against a golden file.
CLI crashes if linkerd-config contains unexpected values.
Add a safe accessor that initializes an empty Global on the first
access. Refactor all accesses to use the newly introduced accessor using
gopls.
Add test for linkerd-config data without Global.
Fixes#5215
Co-authored-by: Itai Schwartz <yitai27@gmail.com>
Signed-off-by: Hod Bin Noon <bin.noon.hod@gmail.com>
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2720 and 2711
This changes the default behavior of `linkerd inject` to not inject the
proxy but just the `linkerd.io/inject: enabled` annotation for the
auto-injector to pick it up (regardless of any namespace annotation).
A new `--manual` mode was added, which behaves as before, injecting
the proxy in the command output.
The unit tests are running with `--manual` to avoid any changes in the
fixtures.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Enhance webhook unit tests by checking returned JSON patch
Also have labels/annotations added during injection to be added in order
Fixes#2560
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Performing this check earlier helps to separate the specialized logic to the CLI
and webhook.
Any subsequent modification of this check logic to support config override of
existing meshed workload will be confined to the relevant component.
The shared lib can then focus only on config overrides.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
* Defined the config annotations as new constants in labels.go
* Introduced the getOverride() functions to override configs
* Introduced new accessors to abstract with type casting
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Changed the protobuf definition to take out destinationApiPort entirely
* Store destinationAPIPort as a constant in pkg/inject.go
Fixes#2351
Signed-off-by: Aditya Sharma <hello@adi.run>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
The way these tests compare the hard-coded base64-encoded JSON
patches with those generated by the proxy injector, is extremely
brittle. Changing any of the proxy configuration causes these tests
to break, even though the proxy injector itself isn't affected.
Also, the AdmissionRequest and AdmissionResponse types are "boundary
objects" that are largely irrelevant to our code.
Fixes#2201
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Add pod spec annotation to disable injection in CLI and auto-injector
* Remove support for linkerd.io/auto-inject label entirely
* Update based on review feedback
* Fix issue with finding the namespace of deployments applied to the default ns
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Export RootOptions and BuildFirewallConfiguration so that the cni-plugin can use them.
* Created the cni-plugin based on istio-cni implementation
* Create skeleton files that need to be filled out.
* Create the install scripts and finish up plugin to write iptables
* Added in an integration test around the install_cni.sh and updated the script to handle the case where it isn't the only plugin. Removed the istio kubernetes.go file in favor of pkg/k8s; initial usage of this package; found and fixed the typo in the ClusterRole and ClusterRoleBinding; found the docker-build-cni-plugin script
* Corrected an incorrect name in the docker build file for cni-plugin
* Rename linkerd2-cni to linkerd-cni
* Fixup Dockerfile and clean up code a bit as well as logging statements.
* Update Gopkg.lock after master merge.
* Update test file to remove temporary tag.
* Fixed the command to run during the test while building up the docker run.
* Added attributions to applicable files; in the test file, use a different container for each test scenario and also print the docker logs to stdout when there is an error;
* Add the --no-init-container flag to install and inject. This flag will not output the initContainer and will add an annotation assuming that the cni will be used in this case.
* Update .travis.yml to build the cni-plugin docker image before running the tests.
* Workaround golint warnings.
* Create a new command to install the linkerd-cni plugin.
* Add the --no-init-container option to linkerd inject
* Use the setup ip tables annotation during the proxy auto inject webhook prevent/allow addition of an init container; move cni-plugin tests to the integration-test section of travis
* gate the cni-plugin tests with the -integration-tests flag; remove unnecessary deployment .yaml file.
* Incorporate PR Cleanup suggestions.
* Remove the SetupIPTablesLabel annotation and use config flags and the presence of the init container to determine whether the cni-plugin writes ip tables.
* Fix a logic bug in the cni-plugin code that prevented the iptables from being written; Address PR comments; make tests pass.
* Update go deps shas
* Changed the single file install-cni plugin filename to be .conf vs .conflist; Incorporated latest PR comments around spacing with the new renderer among others.
* Fix an issue with renaming .conf to .conflist when needed.
* Renamed some of the variables to try to make it more clear what is going on.
* Address final PR comments.
* Hide cni flags for the time being.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
Kevin Leimkuhler
Tarun Pothulapati
Alejandro Pedraza
hodbn
Zahari Dichev
Paul Balogh
Alex Leong
arminbuerkle
Alejandro Pedraza
Ivan Sim
Oliver Gould
Aditya Sharma
Andrew Seigner
Kevin Lingerfelt
Cody Vandermyn