The `linkerd upgrade --from-manifests` command supports reading the
manifest output via `linkerd install`. PR #3167 introduced a tap
APIService object into `linkerd install`, but the manifest-reading code
in fake.go was never updated to support this new object kind.
Update the fake clientset code to support APIService objects.
Fixes#3559
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Add the tracing environment variables to the proxy spec
* Add tracing event
* Remove unnecessary CLI change
* Update log message
* Handle single segment service name
* Use default service account if not provided
The injector doesn't read the defaults from the values.yaml
* Remove references to conf.workload.ownerRef in log messages
This nested field isn't always set.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This PR adds `trafficsplit` as a supported resource for the `linkerd stat` command. Users can type `linkerd stat ts` to see the apex and leaf services of their trafficsplits, as well as metrics for those leaf services.
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The openAPIV3Schema validation in the ServiceProfiles CRD is very limited in what it can validate and is obviated by more sophisticated validation done by the validating admission controller. Therefore, we would like to remove the openAPIV3Schema validation to reduce the size and complexity of the CRD object.
To do so, we must also bump the version of the ServiceProfile custom resource from v1alpha1 to v1alpha2. This ensures that when the controller is upgraded, it will attempt to watch the v1alpha2 resource. If it cannot (because, for example, the controller pod started before the ServiceProfile CRD was updated and therefore the v1alpha2 version does not exist) then it will go into a crash loop backoff until it can. This essentially means that the controller will wait for the CRD to be upgraded to include v1alpha2 before it will start.
Bumping the version is necessary because if we did not, it would be possible for the controller to start before the CRD is updated (removing the validation). In this case, when the CRD is edited, the controller will lose its list watch on ServiceProfiles and will stop getting updates.
Signed-off-by: Alex Leong <alex@buoyant.io>
When waiting for controller pods to be created or become ready, `linkerd check` doesn't offer any hints as to whether there has been an error (such as an ImagePullBackoff).
We add pod status to the output to make this more immediately obvious.
Fixes#2877
Signed-off-by: Alex Leong <alex@buoyant.io>
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
The existing `linkerd install` error message for existing resources was
shared with `linkerd check`. Given the different contexts, the messaging
made more sense for `linkerd check` than for `linkerd install`.
Modify the error messaging for `linkerd install` to print a bare list
of existing resources, and provide instructions for proceeding.
For example:
```bash
$ linkerd install
Unable to install the Linkerd control plane. It appears that there is an existing installation:
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-controller
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-identity
If you are sure you'd like to have a fresh install, remove these resources with:
linkerd install --ignore-cluster | kubectl delete -f -
Otherwise, you can use the --ignore-cluster flag to overwrite the existing global resources.
```
Fixes#3045
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Linkerd's CLI flags all match 1:1 with their `config.linkerd.io/*`
annotation counterparts, except `--enable-debug-sidecar`, which
corresponded to `config.linkerd.io/debug`. Additionally, the Linkerd
docs assume this 1:1 mapping.
Rename the `config.linkerd.io/debug` annotation to
`config.linkerd.io/enable-debug-sidecar`.
Relates to https://github.com/linkerd/website/issues/381
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Simplify port-forwarding code
Simplifies the establishment of a port-forwarding by moving the common
logic into `PortForward.Init()`
Stemmed from this
[comment](https://github.com/linkerd/linkerd2/pull/2937#discussion_r295078800)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* If HA, set the webhooks failure policy to 'Fail'
I'm adding to the linkerd namespace a new label
`linkerd.io/is-control-plane: true` that is used in the webhook configs'
selector to skip the proxy injector for this namespace. This avoids
running into the timing issues described in #2852.
Fixes#2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Add support for querying TrafficSplit resources through the common API layer. This is done by depending on the TrafficSplit client bindings from smi-sdk-go.
Signed-off-by: Alex Leong <alex@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This new annotation is used by the proxy injector to determine if the
debug container needs to be injected.
When using 'linkerd install', the 'pkg/inject' library will only inject
annotations into the workload YAML. Even though 'conf.debugSidecar'
is set in the CLI, the 'injectPodSpec()' function is never invoked on
the proxy injector side. Once the workload YAML got picked up by the
proxy injector, 'conf.debugSidecar' is already nil, since it's a different,
new 'conf' object. The new annotation ensures that the proxy injector
injects the debug container.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
`ServiceProfilesAccess()`, called by control plane components at
startup, would fail if it encountered an `ErrGroupDiscoveryFailed` from
a GroupVersion request. This error is mostly innocuous, as it returns an
error if any GroupVersion fails. `ServiceProfilesAccess()` only needs to
validate ServiceProfiles are available.
Modify `ServiceProfilesAccess()` to specifically request the
ServiceProfile GroupVersion. Also add Discovery object
(`APIResourceList`) support to `NewFakeClientSets`.
Fixes#2780
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Private k8s clusters, such as the private GKE clusters offered by Google
Cloud, cannot be reached through the current API proxy method.
This commit uses the port forwarding feature already developed.
Also modify dashboard command to not fall back to ephemeral port.
Signed-off-by: Jack Price <jackprice@outlook.com>
CustomResourceDefinition parsing and retrieval is not available via
client-go's `kubernetes.Interface`, but rather via a separate
`k8s.io/apiextensions-apiserver` package.
Introduce support for CustomResourceDefintion object parsing and
retrieval. This change facilitates retrieval of CRDs from the k8s API
server, and also provides CRD resources as mock objects.
Also introduce a `NewFakeAPI` constructor, deprecating
`NewFakeClientSets`. Callers need no longer be concerned with discreet
clientsets (for k8s resources vs. CRDs vs. (eventually)
ServiceProfiles), and can instead use the unified `KubernetesAPI`.
Part of #2337, in service to multi-stage check.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Numerous codepaths have emerged that create k8s configs, k8s clients,
and make k8s api requests.
This branch consolidates k8s client creation and APIs. The primary
change migrates most codepaths to call `k8s.NewAPI` to instantiate a
`KubernetesAPI` struct from `pkg`. `KubernetesAPI` implements the
`kubernetes.Interface` (clientset) interface, and also persists a
`client-go` `rest.Config`.
Specific list of changes:
- removes manual GET requests from `k8s.KubernetesAPI`, in favor of
clientsets
- replaces most calls to `k8s.GetConfig`+`kubernetes.NewForConfig` with
a single `k8s.NewAPI`
- introduces a `timeout` param to `k8s.NewAPI`, currently only used by
healthchecks
- removes `NewClientSet` in `controller/k8s/clientset.go` in favor of
`k8s.NewAPI`
- removes `httpClient` and `clientset` from `HealthChecker`, use
`KubernetesAPI` instead
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add config.linkerd.io/disable-identity annotation
First part of #2540
We'll tackle support for `--disable-identity` in `linkerd install` in a
separate commit.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2465
* Add check for unschedulable pods and psp issues (#2465)
* Return error reason and message on pod or node failure
Signed-off-by: Gaurav Kumar <gaurav.kumar9825@gmail.com>
The `linkerd upgrade` command read the control-plane's config from
Kubernetes, which required the environment to be configured to connect
to the appropriate k8s cluster.
Intrdouce a `linkerd upgrade --from-manifests` flag, allowing the user
to feed the output of `linkerd install` into the upgrade command.
Fixes#2629
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add validation webhook for service profiles
Fixes#2075
Todo in a follow-up PRs: remove the SP check from the CLI check.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Define proxy version override annotation
* Don't override global linkerd version during inject
This ensures consistent usages of the config.linkerd.io/linkerd-version and
linkerd.io/proxy-version annotations. The former will only be used to track
overridden version, while the latter shows the cluster's current default
version.
* Rename proxy version config override annotation
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The `install` command errors when the deploy target contains an existing
Linkerd deployment. The `upgrade` command is introduced to reinstall or
reconfigure the Linkerd control plane.
Upgrade works as follows:
1. The controller config is fetched from the Kubernetes API. The Public
API is not used, because we need to be able to reinstall the control
plane when the Public API is not available; and we are not concerned
about RBAC restrictions preventing the installer from reading the
config (as we are for inject).
2. The install configuration is read, particularly the flags used during
the last install/upgrade. If these flags were not set again during the
upgrade, the previous values are used as if they were passed this time.
The configuration is updated from the combination of these values,
including the install configuration itself.
Note that some flags, including the linkerd-version, are omitted
since they are stored elsewhere in the configurations and don't make
sense to track as overrides..
3. The issuer secrets are read from the Kubernetes API so that they can
be re-used. There is currently no way to reconfigure issuer
certificates. We will need to create _another_ workflow for
updating these credentials.
4. The install rendering is invoked with values and config fetched from
the cluster, synthesized with the new configuration.
Have the Webhook react to pod creation/update only
This was already working almost out-of-the-box, just had to:
- Change the webhook config so it watches pods instead of deployments
- Grant some extra ClusterRole permissions
- Add the piece that figures what's the OwnerReference and add the label
for it
- Manually inject service account mount paths
- Readd volumes tests
Fixes#2342 and #1751
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change reintroduces identity hinting to the destination service.
The Get endpoint includes identities for pods that are injected with an
identity-mode of "default" and have the same linkerd control plane.
A `serviceaccount` label is now also added to destination response
metadata so that it's accessible in prometheus and tap.
This change adds a new `linkerd2-proxy-identity` binary to the `proxy`
container image as well as a `linkerd2-proxy-run` entrypoint script.
The inject process now sets environment variables on pods to support
identity, including identity names for the destination and identity
services.
As the proxy starts, the identity helper creates a key and CSR in a
tmpfs. As the proxy starts, it reads these files, as well as a
serviceaccount token, and provisions a certificate from controller.
The proxy's /ready endpoint will not succeed until a certificate has
been provisioned.
The proxy will not participate in identity with services other than the
controllers until the Destination controller is modified to provide
identities via discovery.
The introduction of identity in 0626fa37 created new state in the
control plane's configuration that must be considered when re-installing
the control plane or when injecting pods.
This change alters `install` to fail if it would seem to conflict with
an existing installation. This behavior may be disabled with the
`--ignore-cluster` flag.
Furthermore, `inject` now _requires_ that it can fetch a configuration
from the control plane in order to operate. Otherwise the
`--ignore-cluster` and `--disable-identity` flags must be specified.
This change does not actually instrument pods to use identity yet---it
lays the framework for proxy identity without changing the test fixture
output (besides a change to how identity HA is configured).
Fixes#2531
https://github.com/linkerd/linkerd2/pull/2521 introduces an "Identity"
controller, but there is no way to include it in linkerd installation.
This change alters the `install` flow as follows:
- An Identity service is _always_ installed;
- Issuer credentials may be specified via the CLI;
- If no Issuer credentials are provided, they are generated each time `install` is called.
- Proxies are NOT configured to use the identity service.
- It's possible to override the credential generation logic---especially
for tests---via install options that can be configured via the CLI.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
* Defined the config annotations as new constants in labels.go
* Introduced the getOverride() functions to override configs
* Introduced new accessors to abstract with type casting
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The CLI now specifies a default port, 50750, for the Linkerd dashboard.
If that port is not available, it resumes the original behavior of binding to a
free ephemeral port.
linkerd/linkerd2#1721 introduced a `--single-namespace` install flag,
enabling the control-plane to function within a single namespace. With
the introduction of ServiceProfiles, and upcoming identity changes, this
single namespace mode of operation is becoming less viable.
This change removes the `--single-namespace` install flag, and all
underlying support. The control-plane must have cluster-wide access to
operate.
A few related changes:
- Remove `--single-namespace` from `linkerd check`, this motivates
combining some check categories, as we can always assume cluster-wide
requirements.
- Simplify the `k8s.ResourceAuthz` API, as callers no longer need to
make a decision based on cluster-wide vs. namespace-wide access.
Components either have access, or they error out.
- Modify the web dashboard to always assume ServiceProfiles are enabled.
Reverts #1721
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
It's sometimes helpful to spotcheck proxy metrics from a specific pod,
but doing so with kubectl requires a few steps.
Introduce a new `linkerd metrics` command. When given a pod name and
namespace, returns a dump of the proxy's /metrics endpoint.
Also modify the k8s.portforward module to accept initialized k8s config
and client objects, to enable testing.
Fixes#2350.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
linkerd/linkerd2#2349 removed the `--single-namespace` flag, in favor of
runtime detection of cluster vs. namespace access, and also
ServiceProfile availability. This maintained control-plane support for
running in these two states.
This change requires control-plane components have cluster-wide
Kubernetes API access and ServiceProfile availability, and will error
out if not. Once #2349 merges, stage 1 install will be a requirement for
a successful stage 2 install.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Fixes#2377
In inject's ResourceConfig, renamed objMeta to podMeta since
it really points to the pod template metadata. And created a new field
workloadMeta that really points to the main workload (e.g. Deployment) metadata.
Refactored uninject to clean up the labels at both podMeta and
workloadMeta. Also it will remove all the labels and annotations that
start with "linkerd.io" except for the "linkerd.io/inject" annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `linkerd-init` container requires the NET_ADMIN capability to modify
iptables. The `linkerd check` command was not verifying this.
Introduce a `has NET_ADMIN capability` check, which does the following:
1) Lists all available PodSecurityPolicies, if none found, returns
success
2) For each PodSecurityPolicy, validate one exists that:
- the user has `use` access AND
- provides `*` or `NET_ADMIN` capability
A couple limitations to this approach:
- It is testing whether the user running `linkerd check` has NET_ADMIN,
but during installation time it will be the `linkerd-init` pod that
requires NET_ADMIN.
- It assumes the presense of PodSecurityPolicies in the cluster means
the PodSecurityPolicy admission controller is installed. If the
admission controller is not installed, but PSPs exists that restrict
NET_ADMIN, `linkerd check` will incorrectly report the user does not
have that capability.
This PR also fixes the `can create CustomResourceDefinitions` check to
not specify a namespace when doing a `create` check, as CRDs are
cluster-wide.
Fixes#1732
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
Andrew Seigner
Ivan Sim
Bruno M. Custódio
Alejandro Pedraza
Carol A. Scott
Andrew Seigner
Alex Leong
Jonathan Juares Beber
Tarun Pothulapati
Jack Price
Dennis Adjei-Baah
Alejandro Pedraza
Gaurav Kumar
Katerina
Oliver Gould