A container called `proxy-api` runs in the Linkerd2 controller pod. This container listens on port 8086 and serves the proxy-api but does nothing other than forward gRPC requests to the destination container which listens on port 8089.
We remove the proxy-api container altogether and change the destination container to listen on port 8086 instead of 8089. The result is that clients still use the proxy-api by connecting to `proxy-api.<ns>.svc.cluster.local:8086` but the controller has one fewer containers. This results in a simpler system that is easier to reason about.
Signed-off-by: Alex Leong <alex@buoyant.io>
We implement the getProfiles method in the destination service. This method returns a stream of destination profiles for a given authority. It does this by looking up the ServiceProfile resource in the controller namespace named `<svc>.<ns>` where `<svc>` is the name of the service and `<ns>` is the namespace of the service.
This PR includes:
* Adding a ServiceProfile Custom Resource Definition to linkerd install
* A watch based implementation of the getProfiles method in the destination service, similar to the implementation of get.
* An update to the destination client script that allows querying the getProfiles method.
Signed-off-by: Alex Leong <alex@buoyant.io>
Updates to the Kubernetes utility code in `/controller/k8s` to support interacting with ServiceProfiles.
This makes use of the code generated client added in #1752
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add --single-namespace install flag for restricted permissions
* Better formatting in install template
* Mark --single-namespace and --proxy-auto-inject as experimental
* Fix wording of --single-namespace check flag
* Small healthcheck refactor
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
`go test` was failing with
`Fatalf call has arguments but no formatting directives`
Fix test failure, make all logrus api calls consistent.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
Previously, we would tap any resource's pods, regardless of whether the pods
were meshed or not. We can't actually tap non-meshed pods, so I'm adding a check
that will filter out non-meshed pods from the pods that tap watches.
Previous behaviour:
When attempting to hang a non meshed pod, it would establish
a watch on the pods, but then never return any results. In the CLI you could
just cancel it with Ctrl-C. In the web, clicking Stop would send a
WebSocket.close(1000) but wouldn't actually close the connection...
Behaviour after change :
If no pods under the specified resource are meshed, it'll
return an error of no pods being found to tap
The `TapEvent` protobuf contains two maps, `DestinationMeta` and
`SourceMeta`. The `DestinationMeta` contains all the metadata provided
by the proxy that originated the event (ultimately originating from the
Destination service), while the `SourceMeta` currently only contains the
source connection's TLS status.
This branch modifies the Tap server to hydrate the same set of metadata
from the source IP address, when the source was within the cluster. It
does this by adding an indexer of pod IPs to pods to its k8s API client,
and looking up IPs against this index. If a pod was found, the extra
metadata is added to the tap event sent to the client.
This branch also changes the client so that if a source pod name was
provided in the metadata, it prints the pod name rather than the IP
address for the `src` field in its output. This mimics what is currently
done for the `dst` field in tap output. Furthermore, the added source
metadata will be necessary for adding src resource types to tap output
(see issue #1170).
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
`ca-bundle-distributor` described the original role of the program but
`ca` ("Certificate Authority") better describes its current role.
Signed-off-by: Brian Smith <brian@briansmith.org>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Create a ephemeral, in-memory TLS certificate authority and integrate it into the certificate distributor.
Remove the re-creation of deleted ConfigMaps; this will be added back later in #1248.
Signed-off-by: Brian Smith brian@briansmith.org
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* dest service: close open streams on shutdown
* Log instead of print in pkg packages
* Convert ServerClose to a receive-only channel
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update destination service ot use shared informer instead of custom endpoints informer
* Add additional tests for dst svc endpoints watcher
* Remove service ports when all listeners unsubscribed
* Update go deps
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update desintation service to use shared informer instead of pod watcher
* Add const for pod IP index name
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The `conduit tap` command is now deprecated.
Replace `conduit tap` with `connduit tapByResource`. Rename tapByResource
to tap. The underlying protobuf for tap remains, the tap gRPC endpoint now
returns Unimplemented.
Fixes#804
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The TapByResource endpoint was previously a stub.
Implement end-to-end tapByResource functionality, with support for
specifying any kubernetes resource(s) as target and destination.
Fixes#803, #49
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `stat` command did not support `service` as a resource type.
This change adds `service` support to the `stat` command. Specifically:
- as a destination resource on `--to` commands
- as a target resource on `--from` commands
Fixes#805
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Conduit was relying on apps/v1 to Deployment and ReplicaSet APIs.
apps/v1 is not available on Kubernetes 1.8. This prevented the
public-api from starting.
Switch Conduit to use apps/v1beta2. Also increase the Kubernetes API
cache sync timeout from 10 to 60 seconds, as it was taking 11 seconds on
a test cluster.
Fixes#761
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Remove the telemetry service
The telemetry service is no longer needed, now that prometheus scrapes
metrics directly from proxies, and the public-api talks directly to
prometheus. In this branch I'm removing the service itself as well as
all of the telemetry protobuf, and updating the conduit install command
to no longer install the service. I'm also removing the old version of
the stat command, which required the telemetry service, and renaming the
statsummary command to stat.
* Fix time window tests
* Remove deprecated controller scrape config
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The ListPods endpoint's logic resides in the telemetry service, which is
going away.
Move ListPods logic into public-api, use new k8s informer APIs.
Fixes#694
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Switch public API to use cached k8s resources
* Move shared informer code to separate goroutine
* Fix spelling issue
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Start implementing new conduit stat summary endpoint.
Changes the public-api to call prometheus directly instead of the
telemetry service. Wired through to `api/stat` on the web server,
as well as `conduit statsummary` on the CLI. Works for deployments only.
Current implementation just retrieves requests and mesh/total pod count
(so latency stats are always 0).
Uses API defined in #663
Example queries the stat endpoint will eventually satisfy in #627
This branch includes commits from @klingerf
* run ./bin/dep ensure
* run ./bin/update-go-deps-shas
* Most controller listeners should only bind on localhost
* Use default listening addresses in controller components
* Review feedback
* Revert test_helper change
* Revert use of absolute domains
Signed-off-by: Alex Leong <alex@buoyant.io>
When the conduit proxy is injected into the controller pod, we observe controller pod proxy stats show up as an "outbound" deployment for an unrelated upstream deployment. This may cause confusion when monitoring deployments in the service mesh.
This PR filters out this "misleading" stat in the public api whenever the dashboard requests metric information for a specific deployment.
* exclude telemetry generated by the control plane when requesting deployment metrics
fixes#370
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Set conduit version to match conduit docker tags
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove --skip-inbound-ports for emojivoto
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename git_sha => git_sha_head
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Switch to using the go linker for setting the version
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Log conduit version when go servers start
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Cleanup conduit script
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add --short flag to head sha command
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Set CONDUIT_VERSION in docker-compose env
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Stop ignoring the most significant labels of Destination names
Previously the destinations service was ignoring all the labels in a
destination name after the first two labels. Thus, for example,
"name.ns.another.domain.example.com" would be
considered the same as "name.ns.svc.cluster.local". This was very
wrong.
Match destination names taking into consideration every label in the
destination name.
Provisions have been made for the case where the controller and the
proxies with the zone name to use. However, currently neither the
controller nor the proxies are actually configured with the zone, so
the implementation was made to work in the current configuration too,
as long as fully-qualified names are not used.
A negative consequence of this change is that a name like
"name.ns.svc.cluster.local" won't resolve in the current configuration,
because the controller doesn't know the zone is "cluster.local"
Unit tests are included for the new mapping rules.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Sort imports
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Upgrade k8s.io/client-go to v6.0.0
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Make k8s store initialization blocking with timeout
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The existing startup/shutdown log info messages had spacing issues and
used fmt.
Update the log messages to use logrus for consistency, and fix spacing
issues.
Signed-off-by: Andrew Seigner <andrew@sig.gy>
We’ve built Conduit from the ground up to be the fastest, lightest,
simplest, and most secure service mesh in the world. It features an
incredibly fast and safe data plane written in Rust, a simple yet
powerful control plane written in Go, and a design that’s focused on
performance, security, and usability. Most importantly, Conduit
incorporates the many lessons we’ve learned from over 18 months of
production service mesh experience with Linkerd.
This repository contains a few tightly-related components:
- `proxy` -- an HTTP/2 proxy written in Rust;
- `controller` -- a control plane written in Go with gRPC;
- `web` -- a UI written in React, served by Go.
Kevin Lingerfelt
Alex Leong
Andrew Seigner
Ivan Sim
Risha Mars
Eliza Weisman
Brian Smith
Oliver Gould
Alena Varkockova
Dennis Adjei-Baah