Previously, we would display source and destination info in the Top/Tap table
popovers in a vertical format. This PR places them in a table so that each type
of source/dest (ip, pod, pod owner) can be read left to right.
* Display the popover Source/Destination info for the tap and top tables in a
tabular format
* Added an arrow column between Src and Dst
When pods or deployments are in an "Initialization" phase we currently see a "warning" icon that represents pods going under some kind of change. This may sometimes seem alarming when initially injecting pods after installing Linkerd.
This PR adds a new icon that shows up when pods are in the "PodInitializing" phase and shows the former "warning" icon when there is an error in starting pods.
fixes#1652
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Draw customizable SVG paths for octopus arms.
This also combines all the unmeshed resources into a list and displays them in
one resource box, instead of adding one box per unmeshed resource. This helps
keep the box heights constant, which I want to draw the arrows.
The success rate mini chart shows a colour based on SR, and also shows the SR
via the proportion of the chart that's filled out. If the success rate is 0% (as
in the VotePoop endpoint in the emojivoto demo), the chart would be zero
percent filled out, causing it to be entirely gray. Really, it should be entirely
red, since zero SR is pretty bad.
Fix: fully fill the bar with red if there is a zero SR
Prevent error when trying to tap without having a namespace and resource
selected by disabling the tap button.
Fixes#1670
Signed-off-by: Mathis Wiehl <mathis.wiehl@sinnerschrader.com>
* Update version checks to support release channels
* Update based on review feedback
* Fix sidebar tests
* Update CI config for edge and stable tags
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
If you go to /top and select a namespace and then a resource, and then clear the
resource, there would be a javascript error that would cause the whole app not
to render. Fix this.
Problem
Previously, we'd display one row in top per sourcePod -> dstPod. When
viewing resources at a higher level though (e.g. deployments with multiple pods)
the src/dst column displays the resource at that level, and displaying multiple
rows with deploy/foo is confusing.
Solution
Key the top table off of the resource currently being requested, so
that all the rows are rolled up appropriately. In the popover for that column,
display a list of pods/ips that are rolled up.
This branch also adds a generic list of resources to the tap/top dropdown (you
were always able to tap them, but when I switched from autocomplete to select
for this dropdown, you lost the ability to type in arbitrary resources).
If you select a from namespace and from resource in /tap and try to clear them
using the little x in the form field, there would be a huge js error causing the
app to not render. Fix this.
Also removes filterOptions which wasn't being used any more. This will probably
make parsing tap results ever so slightly faster as we're now not trying to also
aggregate potential filter options.
* Fix js errors on Tap form when Clear button is hit
* Remove filter options code since we're not using the filters anywhere
When a websocket connection is closed between Chrome and a server, we get a 1006 error code signifying abnormal closure of the websocket connection. It seems as if we only get this error on Chrome web clients. Firefox and Safari do not encounter this issue.
The solution is to suppress 1006 errors that occur in the web browser since the connection is closed anyway. There is no negative side effect that occurs when the connection is closed abnormally and so the error message is benign.
fixes#1630
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Don't display RPS unit in metrics table
* Fix Tap and Top icons not being minimized correctly
* remove metric tooltip on RPS column
* Fix extra spacing on Tap/Top in sidebar
Try to make the tap table easier to parse by moving some info into the expanded
row. You can also now click anywhere on the row to expand.
The mocks in #1629 have Authority, Path and Latency buried, but I figured they might be
useful to see in the top level, so they're here.
The `linkerd check` parameter hits
https://versioncheck.linkerd.io/version.json to check for the latest
Linkerd version. This loses information, as that endpoint is intended to
record current version, uuid, and source.
Modify `linkerd check` to set `version`, `uuid`, and `source`
parameters when performing a version check.
Part of #1604.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
I find the tap and top icons a bit strange. Using the filter icon for tap is weird because we already use the filter icon for filtering columns. The caret-up icon looks weird to me for top because it looks like something that is click to expand.
Change the tap icon to the Font Awesome microscope. Change the top icon to the Font Awesome stream.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add version check to Grafana dashboard
The web dashboard checks the local Linkerd version against the latest
release, and informs the user if an update is available. Grafana was not
doing this.
Modify the Grafana dashboard to perform a version check, and prompt the
user to update if needed.
Fixes#1607
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
There are two variables we use to control the volume of Top output,
maxRowsToDisplay, which controls how many rows are in the table, and
maxRowsToStore, which controls the size of the event index we keep in memory for
aggregating results.
Previously, we were only keeping in index maxRowsToDisplay rows, which for the
Resource Detail page was 10 (which is really small for high traffic rest-y
resource traffic - it causes rows to be deleted from the index too soon, and
then causes the data in the table to change a lot). Change this to store
maxRowsToStore rows, and also bump this to 50. This allows us to store results
for longer, and also ensures more consistent data over time.
Another fix for the appearance of the Top columns is to add fixed widths to the
metrics. This will prevent the table from wobbling from side to side.
A bunch of web UI tweaks:
- Add a small success rate chart to the metrics tables
- Improve latency formatting for seconds latencies
- Rename upstream/downstream to inbound/outbound
- Make Top table look consistent with rest of tables on page
- Fix widths of metrics column columns so that tables align
Consolidate the source and destination columns into one column,
and add a direction column (To/From) so the user knows if the
displayed resource is src/dst.
The web client displays `Websocket [code]` on websocket close errors.
Modify the web client to render a more helpful error message to the
user. If a reason is present, render that, otherwise translate the
websocket error code into a message.
Fixes#1599
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds a breadcrumb style navigation to the Linkerd dashboard. Each "crumb" links to its corresponding page in the UI.
This PR also includes a small UI fix in the sidebar. The select box always seems to revert to the All Namespaces option whenever there is a state change on the React side. The fix ensures that the select box always displays the namespace filter if it is available and revert to All Namespaces when no namespace is selected.
fixes#1464fixes#1543fixes#1627
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Use Tap data on Resource Detail page to display unmeshed resources
that send traffic to the specified resource.
* Don't update neighbors on every websocket recv; this causes too much rendering.
Instead, store in internal variable and update with the api results.
This branch uses the src data from tap to discern which unmeshed resources are
sending traffic to the specified resource. We then show this resource in the
octopus graph.
Note that tap is sampled data, so it's possible for an unmeshed resource to not
show up. Also, because we won't know about the resource until it appears in the
Tap results, results could pop into the chart at any time.
_.throttle setState for receiving websocket tap events to prevent continuous rerendering
Problem
We receive a lot of websocket events from the tap server. Previously, we
were processing each event as we received it, then calling setState after
processing to update the tables. Each call to setState triggered a re-render of
the whole table. We were rerendering multiplie times a second, causing the whole
page to become unresponsive.
Solution
Throttle setState for receiving websocket tap events to prevent
continuous rerendering. Store the tap events in an index outside of state, and
only update the state once every specified interval (currently 500ms).
We can now view entire namespaces with Top and the page won't crash!
To verify: Go to /top and try topping a namespace
Adds a new page that shows all namespaces in an accordion. This will replace
ServiceMesh as the default landing page.
The page will request stats for all namespaces, and then pick the first meshed
namespace that's not the linkerd namespace to auto-expand in the accordion.
This branch also updates the definition of "added to the mesh" in the frontend
to be runningPodCount > 0 && meshedPodCount > 0 (previously, it was
runningPodCount === meshedPodCount, which would count resources with no pods as
"added").
I've also moved the link to /namespaces out of the top-level sidebar and into
the Resources sub-menu.
* Use url query params for tap/top form filters
* Add comment explaining react-url-query onChange handlers
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, WebSocket error messages would appear with the first
couple characters cut off. I've fixed this by using ws.WriteControl
instead of ws.WriteMessage to write errors, as gorilla does in
their example app.
- Use writeControl to write error messages to the client
- Stop the spinner if there is an error present
- Use an ant Select instead of Autocomplete for resource list, so that the user
can see all available tappable resources
- Fix bug where the authority autocomplete wasn't showing any options
- Adds "namespace/" as an option in the resource selection dropdown
This required some weird handling because we allow requests of the form
linkerd tap namespace/linkerd (taps namespace linkerd)
but not
linkerd tap namespace --namespace linkerd (does not work as intended,
taps every namespace)
Remove twitter, github and slack links from the sidebar.
The "Update Linkerd" menu item will still show up if there's an update.
The "Update now" button will also still show.
Increase the MaxRps on the tap server to 100 RPS.
The max RPS for tap/top was increased in for the CLI #1531, but we were
still manually setting this to 1 RPS in the Web UI and Web server.
Remove the pervasive setting of MaxRps to 1 in the web frontend and server
In #1540 I moved the version check code and was using our prefixed version of
fetch. This is unnecessary because the version check URL doesn't depend on the
dashboard URL prefix.
TLDR Don't use prefixed fetch for version check
A bunch of small items.
This branch:
- filters out un-meshed resources from the Tap and Top autocompletes
- removes an un-rendered title attribute from the sidebar menu items
- formats latency in Tap with a comma
- prevents the grafana link from showing if there are 0 pods in a deployment
Previously, we included a version check in the server polling loop, which meant
we were hitting the version check endpoint once very 10 seconds from the
sidebar. This PR moves that check out of the loop so that we only hit it once,
upon pageload.
This PR also includes
- some whitespace fixes
- a fix for a console error we were triggering with our tests
Linkerd CLI's "look and feel" is similar to Kubernetes kubectl CLI. Linkerd's dashboard can be extended to match Kubernetes dashboard UI.
This PR serves as a starting point for this work. The new sidebar shows all resources from all namespaces on initial page load. Resources can be filtered to show only items in a given namespace. The sidebar displays authority, deployment, service and, pod resources. We may need to think about whether it is necessary to show all resources types. Some resources, i.e. authorities, contain a large cardinality of resource details and may not be very useful to a user.
fixes#1449
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Includes a substantial refactor of Top.jsx to move the websocket
and top-request-aggregation code into a self-contained module
so that this code can be shared by /top and by each resource
detail page.
(This refactor also helps separate concerns in that
page; since that page also makes 10 second requests to the stat
api to populate the autocompletes in the form).
The TopModule uses the startTap prop to figure out whether it
should start a websocket connection and make a tap request
when mounted. (This is because the resource detail pages
start tapping immediately upon load, whereas /top can only
start once you've entered a query.
I've removed the spinner and the awaitingWebSocketConnection
state field because that now belongs in the top module. I think a
similar refactor of tap would be good before we re-add it.
Do a little more work to get the octopus graph closer to the mocks.
This version gives you a slightly better navigational sense of where
you are in the app, and gives you a clearer
view of the neighbouring stats
Risha Mars
Dennis Adjei-Baah
Mathis Wiehl
Kevin Lingerfelt
Andrew Seigner
Alex Leong
Thomas Rampelberg