The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
The proxy has a default, hardcoded set of ports on which it doesn't do
protocol detection (25, 587, 3306 -- all of which are server-first
protocols). In a recent change, this default set was removed from
the outbound proxy, since there was no way to configure it to anything
other than the default set. I had thought that there was a default set
applied to proxy-init, but this appears to not be the case.
This change adds these ports to the default Helm values to restore the
prior behavior.
I have also elected to include 443 in this set, as it is generally our
recommendation to avoid proxying HTTPS traffic, since the proxy provides
very little value on these connections today.
Additionally, the memcached port 11211 is skipped by default, as clients
do not issue any sort of preamble that is immediately detectable.
These defaults may change in the future, but seem like good choices for
the 2.9 release.
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
Updating only the go 1.15 version, makes the upgrades fail from older versions,
as the identity certs do not have that setting and go 1.15 expects them.
This PR upgrades the cert generation code to have that field,
allowing us to move to go 1.15 in later versions of Linkerd.
Supersedes #4846
Bump proxy-init to v1.3.6, containing CNI fixes and support for
multi-arch builds.
#4846 included this in v1.3.5 but proxy.golang.org refused to update the
modified SHA
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#3984
We use the new `/live` admin endpoint in the Linkerd proxy for liveness probes instead of the `/metrics` endpoint. This endpoint returns a much smaller payload.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Bump proxy-init to v1.3.2
Bumped `proxy-init` version to v1.3.2, fixing an issue with `go.mod`
(linkerd/linkerd2-proxy-init#9).
This is a non-user-facing fix.
## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Pods with non empty securitycontext capabilities fail to be injected
Followup to #3744
The `_capabilities.tpl` template got its variables scope changed in
`Values.Proxy`, which caused inject to fail when security context
capabilities were detected.
Discovered when testing injecting the nginx ingress controller.
Oliver Gould
Tarun Pothulapati
Alejandro Pedraza
Zahari Dichev
Ali Ariff
cpretzer
Matei David
Naseem
Alex Leong
Kevin Leimkuhler
Mayank Shah
Paul Balogh