The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
Updating only the go 1.15 version, makes the upgrades fail from older versions,
as the identity certs do not have that setting and go 1.15 expects them.
This PR upgrades the cert generation code to have that field,
allowing us to move to go 1.15 in later versions of Linkerd.
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#3984
We use the new `/live` admin endpoint in the Linkerd proxy for liveness probes instead of the `/metrics` endpoint. This endpoint returns a much smaller payload.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This change adds a new `linkerd2-proxy-identity` binary to the `proxy`
container image as well as a `linkerd2-proxy-run` entrypoint script.
The inject process now sets environment variables on pods to support
identity, including identity names for the destination and identity
services.
As the proxy starts, the identity helper creates a key and CSR in a
tmpfs. As the proxy starts, it reads these files, as well as a
serviceaccount token, and provisions a certificate from controller.
The proxy's /ready endpoint will not succeed until a certificate has
been provisioned.
The proxy will not participate in identity with services other than the
controllers until the Destination controller is modified to provide
identities via discovery.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
In linkerd/linkerd2-proxy#186, the proxy supports configuration of TCP
keepalive values.
This change sets `LINKERD2_PROXY_INBOUND_ACCEPT_KEEPALIVE` and
`LINKERD2_PROXY_OUTBOUND_CONNECT_KEEPALIVE` to 10s when injecting the
proxy, so that remote connections are configured with a keepalive.
This configuration is NOT yet exposed through the CLI. This may be done
in a followup, if necessary.
Fixes#1949
* Export RootOptions and BuildFirewallConfiguration so that the cni-plugin can use them.
* Created the cni-plugin based on istio-cni implementation
* Create skeleton files that need to be filled out.
* Create the install scripts and finish up plugin to write iptables
* Added in an integration test around the install_cni.sh and updated the script to handle the case where it isn't the only plugin. Removed the istio kubernetes.go file in favor of pkg/k8s; initial usage of this package; found and fixed the typo in the ClusterRole and ClusterRoleBinding; found the docker-build-cni-plugin script
* Corrected an incorrect name in the docker build file for cni-plugin
* Rename linkerd2-cni to linkerd-cni
* Fixup Dockerfile and clean up code a bit as well as logging statements.
* Update Gopkg.lock after master merge.
* Update test file to remove temporary tag.
* Fixed the command to run during the test while building up the docker run.
* Added attributions to applicable files; in the test file, use a different container for each test scenario and also print the docker logs to stdout when there is an error;
* Add the --no-init-container flag to install and inject. This flag will not output the initContainer and will add an annotation assuming that the cni will be used in this case.
* Update .travis.yml to build the cni-plugin docker image before running the tests.
* Workaround golint warnings.
* Create a new command to install the linkerd-cni plugin.
* Add the --no-init-container option to linkerd inject
* Use the setup ip tables annotation during the proxy auto inject webhook prevent/allow addition of an init container; move cni-plugin tests to the integration-test section of travis
* gate the cni-plugin tests with the -integration-tests flag; remove unnecessary deployment .yaml file.
* Incorporate PR Cleanup suggestions.
* Remove the SetupIPTablesLabel annotation and use config flags and the presence of the init container to determine whether the cni-plugin writes ip tables.
* Fix a logic bug in the cni-plugin code that prevented the iptables from being written; Address PR comments; make tests pass.
* Update go deps shas
* Changed the single file install-cni plugin filename to be .conf vs .conflist; Incorporated latest PR comments around spacing with the new renderer among others.
* Fix an issue with renaming .conf to .conflist when needed.
* Renamed some of the variables to try to make it more clear what is going on.
* Address final PR comments.
* Hide cni flags for the time being.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Oliver Gould
Tarun Pothulapati
Alejandro Pedraza
Zahari Dichev
Ali Ariff
Matei David
Naseem
Alex Leong
Mayank Shah
Ivan Sim
arminbuerkle
Kevin Leimkuhler
Cody Vandermyn
Cody Vandermyn