The proxy no longer honors DESTINATION_GET variables, as profile lookups
inform when endpoint resolution is performed. Also, there is no longer
a router capacity limit.
It appears that Amazon can use the `100.64.0.0/10` network, which is
technically private, for a cluster's Pod network.
Wikipedia describes the network as:
> Shared address space for communications between a service provider
> and its subscribers when using a carrier-grade NAT.
In order to avoid requiring additional configuration on EKS clusters, we
should permit discovery for this network by default.
The proxy has a default, hardcoded set of ports on which it doesn't do
protocol detection (25, 587, 3306 -- all of which are server-first
protocols). In a recent change, this default set was removed from
the outbound proxy, since there was no way to configure it to anything
other than the default set. I had thought that there was a default set
applied to proxy-init, but this appears to not be the case.
This change adds these ports to the default Helm values to restore the
prior behavior.
I have also elected to include 443 in this set, as it is generally our
recommendation to avoid proxying HTTPS traffic, since the proxy provides
very little value on these connections today.
Additionally, the memcached port 11211 is skipped by default, as clients
do not issue any sort of preamble that is immediately detectable.
These defaults may change in the future, but seem like good choices for
the 2.9 release.
This PR Updates the Injection Logic (both CLI and proxy-injector)
to use `Values` struct instead of protobuf Config, part of our move
in removing the protobuf.
This does not touch any of the flags, install related code.
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Co-authored-by: Alex Leong <alex@buoyant.io>
* Push docker images to ghcr.io instead of gcr.io
The `cloud_integration.yml` and `release.yml` workflows were modified to
log into ghcr.io, and remove the `Configure gcloud` step which is no
longer necessary.
Note that besides the changes to cloud_integration.yml and release.yml, there was a change to the upgrade-stable integration test so that we do linkerd upgrade --addon-overwrite to reset the addons settings because in stable-2.8.1 the Grafana image was pegged to gcr.io/linkerd-io/grafana in linkerd-config-addons. This will need to be mentioned in the 2.9 upgrade notes.
Also the egress integration test has a debug container that now is pegged to the edge-20.9.2 tag.
Besides that, the other changes are just a global search and replace (s/gcr.io\/linkerd-io/ghcr.io\/linkerd/).
The proxy performs endpoint discovery for unnamed services, but not
service profiles.
The destination controller and proxy have been updated to support
lookups for unnamed services in linkerd/linkerd2#4727 and
linkerd/linkerd2-proxy#626, respectively.
This change modifies the injection template so that the
`proxy.destinationGetNetworks` configuration enables profile
discovery for all networks on which endpoint discovery is permitted.
Updating only the go 1.15 version, makes the upgrades fail from older versions,
as the identity certs do not have that setting and go 1.15 expects them.
This PR upgrades the cert generation code to have that field,
allowing us to move to go 1.15 in later versions of Linkerd.
Supersedes #4846
Bump proxy-init to v1.3.6, containing CNI fixes and support for
multi-arch builds.
#4846 included this in v1.3.5 but proxy.golang.org refused to update the
modified SHA
Add a new structure on the destination controller side to keep track of contextual information.
The token format has been changed from ns:<namespace> to a JSON format so that more variables can be
encdoed in the token. As part of this PR, a new field 'nodeName' has been added to help with service
topologies.
Fixes#4498
Signed-off-by: Matei David <matei.david.35@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
Depends on https://github.com/linkerd/linkerd2-proxy-init/pull/10Fixes#4276
We add a `--close-wait-timeout` inject flag which configures the proxy-init container to run with `privileged: true` and to set `nf_conntrack_tcp_timeout_close_wait`.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* use downward API to mount labels to the proxy container as a volume
* add namespace as a label to the pod
* add a trace inject test
* add downwardAPi for controlplaneTracing
* add controlPlaneTracing condition to volumeMounts
* update add-ons to have workload-ns
* add workload-ns label to control-plane components
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
Fixes#3984
We use the new `/live` admin endpoint in the Linkerd proxy for liveness probes instead of the `/metrics` endpoint. This endpoint returns a much smaller payload.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Bump proxy-init to v1.3.2
Bumped `proxy-init` version to v1.3.2, fixing an issue with `go.mod`
(linkerd/linkerd2-proxy-init#9).
This is a non-user-facing fix.
## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
Fixes
- https://github.com/linkerd/linkerd2/issues/2962
- https://github.com/linkerd/linkerd2/issues/2545
### Problem
Field omissions for workload objects are not respected while marshaling to JSON.
### Solution
After digging a bit into the code, I came to realize that while marshaling, workload objects have empty structs as values for various fields which would rather be omitted. As of now, the standard library`encoding/json` does not support zero values of structs with the `omitemty` tag. The relevant issue can be found [here](https://github.com/golang/go/issues/11939). To tackle this problem, the object declaration should have _pointer-to-struct_ as a field type instead of _struct_ itself. However, this approach would be out of scope as the workload object declaration is handled by the k8s library.
I was able to find a drop-in replacement for the `encoding/json` library which supports zero value of structs with the `omitempty` tag. It can be found [here](https://github.com/clarketm/json). I have made use of this library to implement a simple filter like functionality to remove empty tags once a YAML with empty tags is generated, hence leaving the previously existing methods unaffected
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Disable external profiles by default
* Rename the --disable-external-profiles flag to --enable-external-profiles
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This change adds a new `linkerd2-proxy-identity` binary to the `proxy`
container image as well as a `linkerd2-proxy-run` entrypoint script.
The inject process now sets environment variables on pods to support
identity, including identity names for the destination and identity
services.
As the proxy starts, the identity helper creates a key and CSR in a
tmpfs. As the proxy starts, it reads these files, as well as a
serviceaccount token, and provisions a certificate from controller.
The proxy's /ready endpoint will not succeed until a certificate has
been provisioned.
The proxy will not participate in identity with services other than the
controllers until the Destination controller is modified to provide
identities via discovery.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
The proxy's TLS implementation has changed to use a new _Identity_ controller.
In preparation for this, the `--tls=optional` CLI flag has been removed
from install and inject; and the `ca` controller has been deleted. Metrics
and UI treatments for TLS have **not** been removed, as they will continue to
be valuable for the new Identity system.
With the removal of the old identity scheme, the Destination service's proxy
ID field is now set with an opaque string (e.g. `ns:emojivoto`) to enable
locality awareness.
As described in #2217, the controller returns TLS identities for results even
when the destination pod may not be able to participate in identity
requester: specifically, the other pod may not have the same controller
namespace or it may not be injected with identity.
This change introduces a new annotation, linkerd.io/identity-mode that is set
when injecting pods (via both CLI and webhook). This annotation is always
added.
The destination service now only returns TLS identities when this annotation
is set to optional on a pod and the destination pod uses the same controller.
These semantics are expected to change before the 2.3 release.
Fixes#2217
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2077
When looking up service profiles, Linkerd always looks for the service profile objects in the Linkerd control namespace. This is limiting because service owners who wish to create service profiles may not have write access to the Linkerd control namespace.
Instead, we have the control plane look for the service profile in both the client namespace (as read from the proxy's `proxy_id` field from the GetProfiles request and from the service's namespace. If a service profile exists in both namespaces, the client namespace takes priority. In this way, clients may override the behavior dictated by the service.
Signed-off-by: Alex Leong <alex@buoyant.io>
In linkerd/linkerd2-proxy#186, the proxy supports configuration of TCP
keepalive values.
This change sets `LINKERD2_PROXY_INBOUND_ACCEPT_KEEPALIVE` and
`LINKERD2_PROXY_OUTBOUND_CONNECT_KEEPALIVE` to 10s when injecting the
proxy, so that remote connections are configured with a keepalive.
This configuration is NOT yet exposed through the CLI. This may be done
in a followup, if necessary.
Fixes#1949
This branch removes the `--proxy-bind-timeout` flag from the
`linkerd inject` and `linkerd install` CLI commands, and the
`LINKERD2_PROXY_BIND_TIMEOUT` environment variable from their output.
This is in preparation for removing that timeout from the proxy (as
described in #2013).
I thought it was prudent to remove this from the CLIs before removing it
from the proxy, so we can't create a situation where the CLIs produce
output that results in broken proxy containers.
Fixes#2013
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Version checks were not validating that the cli version matched the
control plane or data plane versions.
Add checks via the `linkerd check` command to validate the cli is
running the same version as the control and data plane.
Also add types around `channel-version` string parsing and matching. A
consequence being that during development `version.Version` changes from
`undefined` to `dev-undefined`.
Fixes#2076
Depends on linkerd/website#101
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Fix reporting of injected resources
When reporting resources provided as a list, it was picking just one
item from the list and ignoring the rest.
Also improved test for injecting list of resources.
Fixes#1676
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* add securityContext with runAsUser: {{.ProxyUID}} to the various containers in the install template
* Update golden to reflect new additions
* changed to a different user id than the proxy user id
* Added a controller-uid install option
* change the port that the proxy-injector runs
* The initContainers needs to be run as the root user.
* move security contexts to container level
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Add support for service profiles created on external (non-service) authorities. For example, this allows you to create a service profile named `linkerd.io` which will apply to calls made to `linkerd.io`.
This is done by changing the `LINKERD2_PROXY_DESTINATION_PROFILE_SUFFIXES` to `.` so that the proxy will attempt to lookup a service profile for any authority. We provide the `--disable-external-profiles` proxy flag to revert this behavior in case it is a problem.
We also refactor the proxy-api implementation of GetProfiles so that it does the profile lookup, regardless of if the authority looks like a Kubernetes service name or not. To simplify this, support for multiple resolves (which was unused) was removed.
Signed-off-by: Alex Leong <alex@buoyant.io>
Oliver Gould
Tarun Pothulapati
Alejandro Pedraza
Zahari Dichev
Ali Ariff
cpretzer
Matei David
Naseem
Alex Leong
Kevin Leimkuhler
Mayank Shah
Paul Balogh
Ivan Sim
Andrew Seigner
arminbuerkle
Kevin Leimkuhler
Cody Vandermyn
Eliza Weisman
Alejandro Pedraza
Kevin Lingerfelt
Cody Vandermyn