When a k8s pod is evicted its Phase is set to Failed and the reason is set to Evicted. Because in the ListPods method of the public APi we only transmit the phase and treat it as Status, the healthchecks assume such evicted data plane pods to be failed. Since this check is retryable, the results is that linkerd check --proxy appears to hang when there are evicted pods. As @adleong correctly pointed out here, the presence of evicted pod is not something that we should make the checks fail.
This change modifies the publci api to set the Pod.Status to "Evicted" for evicted pods. The healtcheks are also modified to not treat evicted pods as error cases.
Fix#4690
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
Regenerated protobuf files, using version 1.4.2 that was upgraded from
1.3.2 with the proxy-api update in #4614.
As of v1.4 protobuf messages are disallowed to be copied (because they
hold a mutex), so whenever a message is passed to or returned from a
function we need to use a pointer.
This affects _mostly_ test files.
This is required to unblock #4620 which is adding a field to the config
protobuf.
`golangci-lint` performs numerous checks on Go code, including golint,
ineffassign, govet, and gofmt.
This change modifies `bin/lint` to use `golangci-lint`, and replaces
usage of golint and govet.
Also perform a one-time gofmt cleanup:
- `gofmt -s -w controller/`
- `gofmt -s -w pkg/`
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add a routes command which displays per-route stats for services that have service profiles defined.
This change has three parts:
* A new public-api RPC called `TopRoutes` which serves per-route stat data about a service
* An implementation of TopRoutes in the public-api service. This implementation reads per-route data from Prometheus. This is very similar to how the StatSummaries RPC and much of the code was able to be refactored and shared.
* A new CLI command called `routes` which displays the per-route data in a tabular or json format. This is very similar to the `stat` command and much of the code was able to be refactored and shared.
Note that as of the currently targeted proxy version, only outbound route stats are supported so the `--from` flag must be included in order to see data. This restriction will be lifted in an upcoming change once we add support for inbound route stats as well.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Refactor util.BuildResource so it can deal with multiple resources
First step to address #1487: Allow stat summary to query for multiple
resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update the stat cli help text to explain the new multi resource querying ability
Propsal for #1487: Allow stat summary to query for multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow stat summary to query for multiple resources
Implement this ability by issuing parallel requests to requestStatsFromAPI()
Proposal for #1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update tests as part of multi-resource support in `linkerd stat` (#1487)
- Refactor stat_test.go to reuse the same logic in multiple tests, and
add cases and files for json output.
- Add a couple of cases to api_utils_test.go to test multiple resources
validation.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` called with multiple resources should keep an ordering (#1487)
Add SortedRes holding the order of resources to be followed when
querying `linkerd stat` with multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Extra validations for `linkerd stat` with multiple resources (#1487)
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` resource grouping, ordering and name prefixing (#1487)
- Group together stats per resource type.
- When more than one resource, prepend name with type.
- Make sure tables always appear in the same order.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow `linkerd stat` to be called with multiple resources
A few final refactorings as per code review.
Fixes#1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The existing `tap` command is being deprecated.
Introduce a `tapByResource` cli command. It supports tapping a Kubernetes
resource or collection of resources, optionally filtered by outbound resources.
This command will eventually replace `tap`.
Part of #778
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The public-api previously only permitted 4 hard-coded time windows:
10s, 1m, 10m, 1h. This was primarily a relic of the recently removed
telemetry system.
Modify the public-api to validate the time string, but allow for any
window size, which is then passed through to Prometheus.
Fixes#686
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Remove the telemetry service
The telemetry service is no longer needed, now that prometheus scrapes
metrics directly from proxies, and the public-api talks directly to
prometheus. In this branch I'm removing the service itself as well as
all of the telemetry protobuf, and updating the conduit install command
to no longer install the service. I'm also removing the old version of
the stat command, which required the telemetry service, and renaming the
statsummary command to stat.
* Fix time window tests
* Remove deprecated controller scrape config
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The new statsummary command accepted friendly k8s names, which worked
for k8s queries, but Prometheus requires a specific key.
Modify the statsummary query to map friendly k8s names to canonical k8s
names when constructing the query. Then during the query, map the
canonical k8s name to a specific Prometheus label.
Fixes#695
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Follow-up from #315.
Now that the UIs don't report per-path metrics, we can remove the path label from Prometheus, the path aggregation and filtering options from the telemetry API, and the path field from the proxy report API.
I've modified the tests to no longer expect the removed fields, and manually verified that Conduit still works after making these changes.
Closes#265
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* Add func to rsolve kubectl-like names to canonical names
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Refactor API instantiation
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make version command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make get command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add tests for api utils
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make stat command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make tap command testablë
Signed-off-by: Phil Calcado <phil@buoyant.io>
Zahari Dichev
Alejandro Pedraza
Andrew Seigner
Alex Leong
Alejandro Pedraza
Kevin Lingerfelt
Oliver Gould
Eliza Weisman
Phil Calçado