Fixes#1493.
When the tap server hydrates metadata for the source or destination peer
of a Tap event from the peer's IP address, it doesn't currently add a
namespace label. However, destinations labeled by the proxy do have such
a label.
This is because the tap server currently gets the hydrated labels from
the `GetPodLabels` function, which is also used by the Destination
service for labeling the individual endpoints in a `WeightedAddrSet`
response. However, the Destination service also adds some labels to all
the endpoints in the set, including the namespace and service, so
`GetPodLabels` doesn't return these labels. However, when the tap server
uses that function, it does not add the service or namespace labels.
This branch fixes this issue by adding those labels to the Tap event
after calling `GetPodLabels`. In addition, it fixes a missing space
between the `src/dst_res` and `src/dst_ns` labels in Tap CLI output
with the `-o wide` flag set. This issue was introduced during the
review of #1437, but was missed at the time because the namespace label
wasn't being set correctly.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Closes#1170.
This branch adds a `-o wide` (or `--output wide`) flag to the Tap CLI.
Passing this flag adds `src_res` and `dst_res` elements to the Tap
output, as described in #1170. These use the metadata labels in the tap
event to describe what Kubernetes resource the source and destination
peers belong to, based on what resource type is being tapped, and fall
back to pods if either peer is not a member of the specified resource
type.
In addition, when the resource type is not `namespace`, `src_ns` and
`dst_ns` elements are added, which show what namespaces the the source
and destination peers are in. For peers which are not in the Kubernetes
cluster, none of these labels are displayed.
The source metadata added in #1434 is used to populate the `src_res` and
`src_ns` fields.
Also, this branch includes some refactoring to how tap output is
formatted.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
The `TapEvent` protobuf contains two maps, `DestinationMeta` and
`SourceMeta`. The `DestinationMeta` contains all the metadata provided
by the proxy that originated the event (ultimately originating from the
Destination service), while the `SourceMeta` currently only contains the
source connection's TLS status.
This branch modifies the Tap server to hydrate the same set of metadata
from the source IP address, when the source was within the cluster. It
does this by adding an indexer of pod IPs to pods to its k8s API client,
and looking up IPs against this index. If a pod was found, the extra
metadata is added to the tap event sent to the client.
This branch also changes the client so that if a source pod name was
provided in the metadata, it prints the pod name rather than the IP
address for the `src` field in its output. This mimics what is currently
done for the `dst` field in tap output. Furthermore, the added source
metadata will be necessary for adding src resource types to tap output
(see issue #1170).
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Adds a tap endpoint in the web api that communicates with the dashboard
via websockets.
I've moved a bunch of code from the cli tap.go into utils so that the code
can be shared between web and CLI. I think we should consider making the
display more suited to web, but in the short term, reusing the CLI's
rendering of tap events works.
Adds a Tap page in the Web UI that you can use to make tap requests.
The form currently only allows you to enter a resource and namespace,
other filters coming in a follow-up branch.
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
public-api and and tap were both using their own implementations of
the Kubernetes Informer/Lister APIs.
This change factors out all Informer/Lister usage into the Lister
module. This also introduces a new `Lister.GetObjects` method.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Tap command leveraged new cli parsing code, enabling Kubernetes
resources specified as `(TYPE [NAME] | TYPE/NAME)`. The Stat command
did not use this.
Modify the Stat command to use the same cli flag parsing code as Tap.
Remove the to/from-resource flags from Stat.
Fixes#792
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `stat` command did not support `service` as a resource type.
This change adds `service` support to the `stat` command. Specifically:
- as a destination resource on `--to` commands
- as a target resource on `--from` commands
Fixes#805
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The existing `tap` command is being deprecated.
Introduce a `tapByResource` cli command. It supports tapping a Kubernetes
resource or collection of resources, optionally filtered by outbound resources.
This command will eventually replace `tap`.
Part of #778
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The public-api previously only permitted 4 hard-coded time windows:
10s, 1m, 10m, 1h. This was primarily a relic of the recently removed
telemetry system.
Modify the public-api to validate the time string, but allow for any
window size, which is then passed through to Prometheus.
Fixes#686
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Add namespace as a resource type in public-api
The cli and public-api only supported deployments as a resource type.
This change adds support for namespace as a resource type in the cli and
public-api. This also change includes:
- cli statsummary now prints `-`'s when objects are not in the mesh
- cli statsummary prints `No resources found.` when applicable
- removed `out-` from cli statsummary flags, and analagous proto changes
- switched public-api to use native prometheus label types
- misc error handling and logging fixes
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Refactor filter and groupby label formulation
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Rename stat_summary.go to stat.go in cli
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Update rbac privileges for namespace stats
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Remove the telemetry service
The telemetry service is no longer needed, now that prometheus scrapes
metrics directly from proxies, and the public-api talks directly to
prometheus. In this branch I'm removing the service itself as well as
all of the telemetry protobuf, and updating the conduit install command
to no longer install the service. I'm also removing the old version of
the stat command, which required the telemetry service, and renaming the
statsummary command to stat.
* Fix time window tests
* Remove deprecated controller scrape config
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The new statsummary command accepted friendly k8s names, which worked
for k8s queries, but Prometheus requires a specific key.
Modify the statsummary query to map friendly k8s names to canonical k8s
names when constructing the query. Then during the query, map the
canonical k8s name to a specific Prometheus label.
Fixes#695
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Start implementing new conduit stat summary endpoint.
Changes the public-api to call prometheus directly instead of the
telemetry service. Wired through to `api/stat` on the web server,
as well as `conduit statsummary` on the CLI. Works for deployments only.
Current implementation just retrieves requests and mesh/total pod count
(so latency stats are always 0).
Uses API defined in #663
Example queries the stat endpoint will eventually satisfy in #627
This branch includes commits from @klingerf
* run ./bin/dep ensure
* run ./bin/update-go-deps-shas
Follow-up from #315.
Now that the UIs don't report per-path metrics, we can remove the path label from Prometheus, the path aggregation and filtering options from the telemetry API, and the path field from the proxy report API.
I've modified the tests to no longer expect the removed fields, and manually verified that Conduit still works after making these changes.
Closes#265
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* Add func to rsolve kubectl-like names to canonical names
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Refactor API instantiation
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make version command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make get command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add tests for api utils
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make stat command testable
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Make tap command testablë
Signed-off-by: Phil Calcado <phil@buoyant.io>
* Add support for path stats in cli and web api
The cli stat command supports grouping by pod and deployment. With this
change, it will also support grouping by path, in order to facilitate a
summary stats per individual endpoint.
* Right-align numeric columns in stat output
We’ve built Conduit from the ground up to be the fastest, lightest,
simplest, and most secure service mesh in the world. It features an
incredibly fast and safe data plane written in Rust, a simple yet
powerful control plane written in Go, and a design that’s focused on
performance, security, and usability. Most importantly, Conduit
incorporates the many lessons we’ve learned from over 18 months of
production service mesh experience with Linkerd.
This repository contains a few tightly-related components:
- `proxy` -- an HTTP/2 proxy written in Rust;
- `controller` -- a control plane written in Go with gRPC;
- `web` -- a UI written in React, served by Go.
Eliza Weisman
Risha Mars
Kevin Lingerfelt
Oliver Gould
Andrew Seigner
Phil Calçado