Fixes#5575
Now that only viz makes use of the `SelfCheck` api, merged the `healthcheck.proto` into `viz.proto`.
Also removed the "checkRPC" functionality that was used for handling multiple API responses and was only used by `SelfCheck`, because the extra complexity was not granted. Revert to use the plain vanilla "check" by just concatenating error responses.
## Success Output
```bash
$ bin/linkerd viz check
...
linkerd-viz
-----------
...
√ viz extension self-check
```
## Failure Examples
Failure when viz fails to connect to the k8s api:
```bash
$ bin/linkerd viz check
...
linkerd-viz
-----------
...
× viz extension self-check
Error calling the Kubernetes API: someerror
see https://linkerd.io/checks/#l5d-api-control-api for hints
Status check results are ×
```
Failure when viz fails to connect to Prometheus:
```bash
$ bin/linkerd viz check
...
linkerd-viz
-----------
...
× viz extension self-check
Error calling Prometheus from the control plane: someerror
see https://linkerd.io/checks/#l5d-api-control-api for hints
Status check results are ×
```
Failure when viz fails to connect to both the k8s api and Prometheus:
```bash
$ bin/linkerd viz check
...
linkerd-viz
-----------
...
× viz extension self-check
Error calling the Kubernetes API: someerror
Error calling Prometheus from the control plane: someerror
see https://linkerd.io/checks/#l5d-api-control-api for hints
Status check results are ×
```
* Protobuf changes:
- Moved `healthcheck.proto` back from viz to `proto/common` as it remains being used by the main `healthcheck.go` library (it was moved to viz by #5510).
- Extracted from `viz.proto` the IP-related types and put them in `/controller/gen/common/net` to be used by both the public and the viz APIs.
* Added chart templates for new viz linkerd-metrics-api pod
* Spin-off viz healthcheck:
- Created `viz/pkg/healthcheck/healthcheck.go` that wraps the original `pkg/healthcheck/healthcheck.go` while adding the `vizNamespace` and `vizAPIClient` fields which were removed from the core `healthcheck`. That way the core healthcheck doesn't have any dependencies on viz, and viz' healthcheck can now be used to retrieve viz api clients.
- The core and viz healthcheck libs are now abstracted out via the new `healthcheck.Runner` interface.
- Refactored the data plane checks so they don't rely on calling `ListPods`
- The checks in `viz/cmd/check.go` have been moved to `viz/pkg/healthcheck/healthcheck.go` as well, so `check.go`'s sole responsibility is dealing with command business. This command also now retrieves its viz api client through viz' healthcheck.
* Removed linkerd-controller dependency on Prometheus:
- Removed the `global.prometheusUrl` config in the core values.yml.
- Leave the Heartbeat's `-prometheus` flag hard-coded temporarily. TO-DO: have it automatically discover viz and pull Prometheus' endpoint (#5352).
* Moved observability gRPC from linkerd-controller to viz:
- Created a new gRPC server under `viz/metrics-api` moving prometheus-dependent functions out of the core gRPC server and into it (same thing for the accompaigning http server).
- Did the same for the `PublicAPIClient` (now called just `Client`) interface. The `VizAPIClient` interface disappears as it's enough to just rely on the viz `ApiClient` protobuf type.
- Moved the other files implementing the rest of the gRPC functions from `controller/api/public` to `viz/metrics-api` (`edge.go`, `stat_summary.go`, etc.).
- Also simplified some type names to avoid stuttering.
* Added linkerd-metrics-api bootstrap files. At the same time, we strip out of the public-api's `main.go` file the prometheus parameters and other no longer relevant bits.
* linkerd-web updates: it requires connecting with both the public-api and the viz api, so both addresses (and the viz namespace) are now provided as parameters to the container.
* CLI updates and other minor things:
- Changes to command files under `cli/cmd`:
- Updated `endpoints.go` according to new API interface name.
- Updated `version.go`, `dashboard` and `uninstall.go` to pull the viz namespace dynamically.
- Changes to command files under `viz/cmd`:
- `edges.go`, `routes.go`, `stat.go` and `top.go`: point to dependencies that were moved from public-api to viz.
- Other changes to have tests pass:
- Added `metrics-api` to list of docker images to build in actions workflows.
- In `bin/fmt` exclude protobuf generated files instead of entire directories because directories could contain both generated and non-generated code (case in point: `viz/metrics-api`).
* Add retry to 'tap API service is running' check
* mc check shouldn't err when viz is not available. Also properly set the log in multicluster/cmd/root.go so that it properly displays messages when --verbose is used
* Separate observability API
Closes#5312
This is a preliminary step towards moving all the observability API into `/viz`, by first moving its protobuf into `viz/metrics-api`. This should facilitate review as the go files are not moved yet, which will happen in a followup PR. There are no user-facing changes here.
- Moved `proto/common/healthcheck.proto` to `viz/metrics-api/proto/healthcheck.prot`
- Moved the contents of `proto/public.proto` to `viz/metrics-api/proto/viz.proto` except for the `Version` Stuff.
- Merged `proto/controller/tap.proto` into `viz/metrics-api/proto/viz.proto`
- `grpc_server.go` now temporarily exposes `PublicAPIServer` and `VizAPIServer` interfaces to separate both APIs. This will get properly split in a followup.
- The web server provides handlers for both interfaces.
- `cli/cmd/public_api.go` and `pkg/healthcheck/healthcheck.go` temporarily now have methods to access both APIs.
- Most of the CLI commands will use the Viz API, except for `version`.
The other changes in the go files are just changes in the imports to point to the new protobufs.
Other minor changes:
- Removed `git add controller/gen` from `bin/protoc-go.sh`
* Remove dependency of linkerd-config for most control plane components
This PR removes the dependency of `linkerd-config` into control
plane components by making all that information passed through CLI
flags. As most of these components require a couple of flags, passing
them as flags could be more helpful, as updations to the flags trigger a
rollout unlike a configMap update.
This does not update the proxy-injector as it needs a lot more data
and mounting `linkerd-config` is better.
## What/How
@adleong pointed out in #4780 that when enabling slices during an upgrade, the new value does not persist in the `linkerd-config` ConfigMap. I took a closer look and it seems that we were never overwriting the values in case they were different.
* To fix this, I added an if block when validating and building the upgrade options -- if the current flag value differs from what we have in the ConfigMap, then change the ConfigMap value.
* When doing so, I made sure to check that if the cluster does not support `EndpointSlices` yet the flag is set to true, we will error out. This is done similarly (copy&paste similarily) to what's in the install part.
* Additionally, I have noticed that the helm ConfigMap template stored the flag value under `enableEndpointSlices` field name. I assume this was not changed in the initial PR to reflect the changes made in the protocol buffer. The API (and thus the CLI) uses the field name `endpointSliceEnabled` instead. I have changed the config template so that helm installations will use the same field, which can then be used in the destination service or other components that may implement slice support in the future.
Signed-off-by: Matei David <matei.david.35@gmail.com>
* support overriding inbound and outbound connect timeouts.
* add validation on user provided TCP connect timeouts
* convert valid time values into ms
Signed-off-by: Matt Miller <mamiller@rosettastone.com>
EndpointSlices have been made opt-in due to their experimental nature. This PR
introduces a new install flag 'enableEndpointSlices' that will allow adopters to
specify in their cli install or helm install step whether they would like to
use endpointslices as a resource in the destination service, instead of the
endpoints k8s resource.
Signed-off-by: Matei David <matei.david.35@gmail.com>
Using following command the wrong spelling were found and later on
fixed:
```
codespell --skip CHANGES.md,.git,go.sum,\
controller/cmd/service-mirror/events_formatting.go,\
controller/cmd/service-mirror/cluster_watcher_test_util.go,\
SECURITY_AUDIT.pdf,.gcp.json.enc,web/app/img/favicon.png \
--ignore-words-list=aks,uint,ans,files\' --check-filenames \
--check-hidden
```
Signed-off-by: Suraj Deshmukh <surajd.service@gmail.com>
* feat: add log format annotation and helm value
Json log formatting has been added via https://github.com/linkerd/linkerd2-proxy/pull/500
but wiring the option through as an annotation/helm value is still
necessary.
This PR adds the annotation and helm value to configure log format.
Closes#2491
Signed-off-by: Naseem <naseem@transit.app>
In #4585 we are observing an issue where a loop is encountered when using nginx ingress. The problem is that the outbound proxy does a dst lookup on the IP address which happens to be the very same address the ingress is listening on.
In order to avoid situations like that this PR introduces a way to modify the set of networks for which the proxy shall do IP based discovery. The change introduces a helm flag `.Values.global.proxy.destinationGetNetworks` that can be used to modify this value. There are two ways a user can affect the this setting:
- setting the `destinationGetNetworks` field in values during a Helm install, which changes the default on all injected pods
- using an annotation ` config.linkerd.io/proxy-destination-get-networks` for injected workloads to override this value
Note that this setting cannot be tweaked through the `install` or `inject` command
Fix: #4585
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
* Replaced `uuid` with `uid` from linkerd-config resource
Fixes#3621
Removed the old `uuid` for identifying linkerd installations, and
replaced it with the `uid` property from the `linkerd-config` ConfigMap.
I tested that this `uid` remains the same by updating the config and
also upgrading linkerd, using both the CLI and Helm.
Note that this required granting `linkerd-web` RBAC access to the
`linkerd-config` Config.
I also added an integration test to verify the stability of the uid.
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
Followup to #2990, which refactored `linkerd endpoints` to use the
`Destination.Get` API instead of the `Discovery.Endpoints` API, leaving
the Discovery with no implented methods. This PR removes all the Discovery
code leftovers.
Fixes#3499
### Motivation
In order to expose arbitrary headers through tap, headers and trailers should be
read from the linkerd2-proxy-api `TapEvent`s and set in the public `TapEvent`s.
This change should have no user facing changes as it just prepares the events
for JSON output in linkerd/linkerd2#3390
### Solution
The public API has been updated with a headers field for
`TapEvent_Http_RequestInit_` and `TapEvent_Http_ResponseInit_`, and trailers
field for `TapEvent_Http_ResponseEnd_`.
These values are set by reading the corresponding fields off of the proxy's tap
events.
The proto changes are equivalent to the proto changes proposed in
linkerd/linkerd2-proxy-api#33
Closes#3262
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
### Summary
After the addition of the tap APIServer, all the logic related to tap in the public API no longer needs to be there. The servers and clients that are created but not used, as well as all the old testing infrastrucure related to tap can be removed.
This deprecates TapByResource and therefore required an update to the protobuf files with `bin/protoc-go.sh`. While the change to deprecate this method was extremely small, a lot of protobuf fils were updated in the process. These changes to the code and protobuf files should probably remain coupled since `TapByResource` is officially deprecated in the public API, but a majority of the additions/deletions are related to those files.
This draft passes `go test` as well as a local run of the integration tests.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
This PR adds `trafficsplit` as a supported resource for the `linkerd stat` command. Users can type `linkerd stat ts` to see the apex and leaf services of their trafficsplits, as well as metrics for those leaf services.
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This change adds an endpoint to the public API to allow us to query Prometheus for edge data, in order to display identity information for connections between Linkerd proxies. This PR only includes changes to the controller and protobuf.
* The 'linkerd-version' CLI flag is renamed to 'control-plane-version'
* Add version field to proxy config
* Add the control plane version to the global config
* Unit test for init image version
* Use more specific control plane and proxy versions in unit tests
Signed-off-by: Ivan Sim <ivan@buoyant.io>
When installing Linkerd, a user may override default settings, or may
explicitly configure defaults. Consider install options like `--ha
--controller-replicas=4` -- the `--ha` flag sets a new default value for
the controller-replicas, and then we override it.
When we later upgrade this cluster, how can we know how to configure the
cluster?
We could store EnableHA and ControllerReplicas configurations in the
config, but what if, in a later upgrade, the default value changes? How
can we know whether the user specified an override or just used the
default?
To solve this, we add an `Install` message into a new config.
This message includes (at least) the CLI flags used to invoke
install.
upgrade does not specify defaults for install/proxy-options fields and,
instead, uses the persisted install flags to populate default values,
before applying overrides from the upgrade invocation.
This change breaks the protobuf compatibility by altering the
`installation_uuid` field introduced in 9c442f6885.
Because this change was not yet released (even in an edge release), we
feel that it is safe to break.
Fixes https://github.com/linkerd/linkerd2/issues/2574
When reading a Linkerd configuration, we cannot determine whether
auto-inject should be configured.
This change adds auto-inject configuration to the global config
structure. Currently, this configuration is effectively boolean,
determined by the presence of an empty value (versus a null).
Currently, the install UUID is regenerated each time `install` is run.
When implementing cluster upgrades, it seems most appropriate to reuse
the prior UUID, rather than generate a new one.
To this end, this change stores an "Installation UUID" in the global
linkerd config.
The new proxy has changed its configuration as follows:
- `LISTENER` urls are now `LISTEN_ADDR` addresses;
- `CONTROL_URL` is now `DESTINATION_SVC_ADDR`;
- `*_NAMESPACE` vars are no longer needed;
- The `PROXY_ID` is now the `DESTINATION_CONTEXT`;
- The "metrics" port is now the "admin" port, since it serves more than
just metrics;
- A readiness probe now checks a dedicated /ready endpoint eagerly.
Identity injection is **NOT** configured by this branch.
This change introduces a new Identity service implementation for the
`io.linkerd.proxy.identity.Identity` gRPC service.
The `pkg/identity` contains a core, abstract implementation of the service
(generic over both the CA and (Kubernetes) Validator interfaces).
`controller/identity` includes a concrete implementation that uses the
Kubernetes TokenReview API to validate serviceaccount tokens when
issuing certificates.
This change does **NOT** alter installation or runtime to include the
identity service. This will be included in a follow-up.
* Changed the protobuf definition to take out destinationApiPort entirely
* Store destinationAPIPort as a constant in pkg/inject.go
Fixes#2351
Signed-off-by: Aditya Sharma <hello@adi.run>
- Created the pkg/inject package to hold the new injection shared lib.
- Extracted from `/cli/cmd/inject.go` and `/cli/cmd/inject_util.go`
the core methods doing the workload parsing and injection, and moved them into
`/pkg/inject/inject.go`. The CLI files should now deal only with
strictly CLI concerns, and applying the json patch returned by the new
lib.
- Proceeded analogously with `/cli/cmd/uninject.go` and
`/pkg/inject/uninject.go`.
- The `InjectReport` struct and helping methods were moved into
`/pkg/inject/report.go`
- Refactored webhook to use the new injection lib
- Removed linkerd-proxy-injector-sidecar-config ConfigMap
- Added the ability to add pod labels and annotations without having to
specify the already existing ones
Fixes#1748, #2289
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
Adds a flag, tcp_stats to the StatSummary request, which queries prometheus for TCP stats.
This branch returns TCP stats at /api/tps-reports when this flag is true.
TCP stats are now displayed on the Resource Detail pages.
The current queried TCP stats are:
tcp_open_connections
tcp_read_bytes_total
tcp_write_bytes_total
Also, some protobuf updates:
* Rename `api_port` to match recent changes in CLI code.
* Remove the `cni` message because it won't be used.
* Remove `registry` field from proto types. This helps to avoid having to workaround edge cases like fully-qualified image name in different format, and overriding user-specified Linkerd version etc.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Define the global and proxy configs protobuf types that will be used by CLI install, inject and the proxy-injector.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Fixes#1875
This change improves the `linkerd routes` command in a number of important ways:
* The restriction on the type of the `--to` argument is lifted and any resource type can now be used. Try `--to ns/books`, `--to po/webapp-ABCDEF`, `--to au/linkerd.io`, or even `--to svc`.
* All routes for the target will now be populated in the table, even if there are no Prometheus metrics for that route.
* [UNKNOWN] has been renamed to [DEFAULT]
* The `Service/Authority` column will now list `Service` in all cases except for when an authority target is explicitly requested.
```
$ linkerd routes deploy/traffic --to deploy/webapp
ROUTE SERVICE SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
GET / webapp 100.00% 0.5rps 50ms 180ms 196ms
GET /authors/{id} webapp 100.00% 0.5rps 100ms 900ms 980ms
GET /books/{id} webapp 100.00% 0.9rps 38ms 93ms 99ms
POST /authors webapp 100.00% 0.5rps 35ms 48ms 50ms
POST /authors/{id}/delete webapp 100.00% 0.5rps 83ms 180ms 196ms
POST /authors/{id}/edit webapp 0.00% 0.0rps 0ms 0ms 0ms
POST /books webapp 45.16% 2.1rps 75ms 425ms 485ms
POST /books/{id}/delete webapp 100.00% 0.5rps 30ms 90ms 98ms
POST /books/{id}/edit webapp 56.00% 0.8rps 92ms 875ms 975ms
[DEFAULT] webapp 0.00% 0.0rps 0ms 0ms 0ms
```
This is all made possible by a shift in the way we handle the destination resource. When we get a request with a `ToResource`, we use the k8s API to find all Services which include at least one pod belonging to that resource. We then fetch all service profiles for those services and display the routes from those serivce profiles.
This shift in thinking also precipitates a change in the TopRoutes API where we no longer need special cases for `ToAll` (which can be specified by `--to au`) or `ToAuthority` (which can be specified by `--to au/<authority>`) and instead can use a `ToResource` to handle all cases.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add parameter to stats API to skip retrieving Prometheus stats
Used by the dashboard to populate list of resources.
Fixes#1022
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Prometheus queries check results were being ignored
* Refactor verifyPromQueries() to also test when no prometheus queries
should be generated
* Add test for SkipStats=true
Includes adding ability to public.GenStatSummaryResponse to not generate
basicStats
* Fix previous test
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
This change alters the controller's Tap service to include route labels
when translating tap events, modifies the public API to include route
metadata in responses, and modifies the tap CLI command to include
rt_ labels in tap output (when -o wide is used).
Add a barebones ListServices endpoint, in support of autocomplete for services.
As we develop service profiles, this endpoint could probably be used to describe
more aspects of services (like, if there were some way to check whether a
service profile was enabled or not).
Accessible from the web UI via http://localhost:8084/api/services
Add a routes command which displays per-route stats for services that have service profiles defined.
This change has three parts:
* A new public-api RPC called `TopRoutes` which serves per-route stat data about a service
* An implementation of TopRoutes in the public-api service. This implementation reads per-route data from Prometheus. This is very similar to how the StatSummaries RPC and much of the code was able to be refactored and shared.
* A new CLI command called `routes` which displays the per-route data in a tabular or json format. This is very similar to the `stat` command and much of the code was able to be refactored and shared.
Note that as of the currently targeted proxy version, only outbound route stats are supported so the `--from` flag must be included in order to see data. This restriction will be lifted in an upcoming change once we add support for inbound route stats as well.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Use ListPods always for data plane HC
* Missing changes in grpc_server.go
* Address review comments
* Read proxy version from spec
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
Alejandro Pedraza
Tarun Pothulapati
Matei David
Matt Miller
Suraj Deshmukh
Naseem
Zahari Dichev
Paul Balogh
Kevin Leimkuhler
Carol A. Scott
arminbuerkle
Jonathan Juares Beber
Ivan Sim
harsh jain
Oliver Gould
Alejandro Pedraza
Aditya Sharma
Risha Mars
Kevin Lingerfelt
Andrew Seigner
Alena Varkockova
Alex Leong