Closes#776.
This branch adds the following validation to the `linkerd stat` command:
* The `--to` and `--from` flags are now mutually exclusive
* The `--to-namespace` and `--from-namespace` commands are also mutually
exclusive.
* The `namespace` resource type conflicts with the `--namespace`,
`--to-namespace`, and `--from-namespace` flags.
Examples:
```
$ bin/go-run cli/main.go stat deploy --to deploy/foo --from deploy/bar
Error: --to and --from flags are mutually exclusive
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat deploy --to-namespace foo --from-namespace bar
Error: --to-namespace and --from-namespace flags are mutually exclusive
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat namespace foo --namespace bar
Error: --namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat ns --to-namespace bar
Error: --to-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat namespace --from-namespace bar
Error: --from-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat ns/foo --from-namespace bar
Error: --from-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Currently, when a cluster has over 100 pods injected with the Linkerd2
proxy, Prometheus metrics are not collected correctly. This is because
Prometheus appears to be making more concurrent requests than its'
proxy's outbound router cache can handle See issue #1322 for further
details.
This branch introduces a workaround for this issue, by increasing the
outbound router cache capacity to 10000 routes for the Prometheus pod's
proxy only. The router capacity limit of 100 active routes is primarily
due to the limitation of the number of active Destination service
lookups, so increasing the capacity for the Prometheus pod specifically
is probably okay, as the scrape requests are made to IP addresses
directly and therefore will not cause service discovery lookups.
This change was originally implemented and tested in @siggy's PR #1228.
I've rebased his branch onto the current `master`, and updated the code
to reflect the project name change.
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
Co-authored-by: Andrew Seigner <siggy@buoyant.io>
This change is a simplified implementation of the Builder.Path() and
Visitor().ExpandPathsToFileVisitors() functions used by kubectl to parse files
and directories. The filepath.Walk() function is used to recursively traverse
directories. Every .yaml or .json resource file in the directory is read
into its own io.Reader. All the readers are then passed to the YAMLDecoder in the
InjectYAML() function.
Fixes#1376
Signed-off-by: ihcsim <ihcsim@gmail.com>
Adds a tap endpoint in the web api that communicates with the dashboard
via websockets.
I've moved a bunch of code from the cli tap.go into utils so that the code
can be shared between web and CLI. I think we should consider making the
display more suited to web, but in the short term, reusing the CLI's
rendering of tap events works.
Adds a Tap page in the Web UI that you can use to make tap requests.
The form currently only allows you to enter a resource and namespace,
other filters coming in a follow-up branch.
`ca-bundle-distributor` described the original role of the program but
`ca` ("Certificate Authority") better describes its current role.
Signed-off-by: Brian Smith <brian@briansmith.org>
These files were created with the executable bit set accidentally due
to the way my network file system setup was configured.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Stop using `installsuffix` when building Go code.
See https://plus.google.com/117192131596509381660/posts/eNnNePihYnK.
`-installsuffix cgo` isn't necessary as of Go 1.10 (where build caching
changed substantially) and it probably wasn't necessary earlier.
Signed-off-by: Brian Smith <brian@briansmith.org>
* update grafana dashboards to remove conduit reference and replace with linkerd instances
* update test install fixtures to reflect changes
Fixes: #1315
Signed-off-by: Franziska von der Goltz <franziska@vdgoltz.eu>
The control-plane's `ClusterRole` and `ClusterRoleBinding` objects are
global. Because their names did not vary across multiple control-plane
deployments, it prevented multiple control-planes from coexisting (when
RBAC is enabled).
Modify the `ClusterRole` and `ClusterRoleBinding` objects to include the
control-plane's namespace in their names. Also modify the integration
test to first install two control-planes, and then perform its full
suite of tests, to prevent regression.
Fixes#1292.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Create a ephemeral, in-memory TLS certificate authority and integrate it into the certificate distributor.
Remove the re-creation of deleted ConfigMaps; this will be added back later in #1248.
Signed-off-by: Brian Smith brian@briansmith.org
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
The proxy's metrics are instrumented with a `tls` label that describes
the state of TLS for each connection and associated messges.
This same level of detail is useful to get in `tap` output as well.
This change updates Tap in the following ways:
* `TapEvent` protobuf updated:
* Added `source_meta` field including source labels
* `proxy_direction` enum indicates which proxy server was used.
* The proxy adds a `tls` label to both source and destination meta indicating the state of each peer's connection
* The CLI uses the `proxy_direction` field to determine which `tls` label should be rendered.
If the controller address has a loopback host then don't use TLS to connect
to it. TLS isn't needed for security in that case. In mormal configurations
the proxy isn't terminating TLS for loopback connections anyway.
Signed-off-by: Brian Smith <brian@briansmith.org>
- Return pod uptimes from the GetPods endpoint
- Adds filtering by namespace to api.GetPods
- Adds a --namespace filter to conduit get pods
- Adds pod uptimes to the controller component toolitps on the ServiceMesh page
- Moves the ServiceMesh page back to using /api/pods
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
The `tap` command is prone to panic due to use of `nil` values.
This is because we don't use the safe `Get*()` field accessors
provided by protobuf.
This change fixes several unsafe field access paths.
Fixes#47
* Add TLS support to `conduit inject`.
Add the settings needed to enable TLs when `--tls=optional` is passed on the
commend line. Later the requirement to add `--tls` will be removed.
Signed-off-by: Brian Smith <brian@briansmith.org>
* Add CA certificate bundle distributor to conduit install
* Update ca-distributor to use shared informers
* Only install CA distributor when --enable-tls flag is set
* Only copy CA bundle into namespaces where inject pods have the same controller
* Update API config to only watch pods and configmaps
* Address review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Add controller admin servers and readiness probes
* Tweak readiness probes to be more sane
* Refactor based on review feedback
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
Problem
`conduit stat` would cause a panic for any resource that wasn't in the list
of StatAllResourceTypes
This bug was introduced by https://github.com/runconduit/conduit/pull/1088/files
Solution
Fix writeStatsToBuffer to not depend on what resources are in StatAllResourceTypes
Also adds a unit test and integration test for `conduit stat ns`
The `kubernetes-nodes-cadvisor` Prometheus queries node-level data via
the Kubernetes API server. In some configurations of Kubernetes, namely
minikube and at least one baremetal kubespray cluster, this API call
requires the `get` verb on the `nodes/proxy` resource.
Enable `get` for `nodes/proxy` for the `conduit-prometheus` service
account.
Fixes#912
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
- It would be nice to display container errors in the UI. This PR gets the pod's container
statuses and returns them in the public api
- Also add a terminationMessagePolicy to conduit's inject so that we can capture the
proxy's error messages if it terminates
* Add readiness/liveness checks for third party components
Any possible issues with the third party control plane components can wedge the services.
Take the best practices for prometheus/grafana and add them to our template. See #1116
* Update test fixtures for new output
* Update destination service ot use shared informer instead of custom endpoints informer
* Add additional tests for dst svc endpoints watcher
* Remove service ports when all listeners unsubscribed
* Update go deps
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Eliza Weisman
Kevin Lingerfelt
Sean McArthur
Ivan Sim
Risha Mars
Brian Smith
Franziska von der Goltz
Andrew Seigner
Oliver Gould
Thomas Rampelberg