Regenerated protobuf files, using version 1.4.2 that was upgraded from
1.3.2 with the proxy-api update in #4614.
As of v1.4 protobuf messages are disallowed to be copied (because they
hold a mutex), so whenever a message is passed to or returned from a
function we need to use a pointer.
This affects _mostly_ test files.
This is required to unblock #4620 which is adding a field to the config
protobuf.
When viewing the output of `linkerd stat` for services which do not have a selector (such as services created by the service-mirror, for example) the meshed count column shows the total number which exist, even though the service actually selects no pods at all.
We update the StatSummary implementation to account for services which have no selector.
Additionally, we update the logic of the `--unmeshed` flag. When the `--unmeshed` flag is not set, we typically skip rows for unmeshed resources because those resources would have no stats. This is not appropriate to do when the `--from` flag is also set because in this case, metrics are not collected on the target resource but are instead collected on the client-side. This means that stats can be present, even for unmeshed resources and these resources should still be displayed, even if the `--unmeshed` flag is not set.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#3807
By setting the LINKERD2_PROXY_DESTINATION_GET_NETWORKS environment variable, we configure the Linkerd proxy to do destination lookups for authorities which are IP addresses in the private network range. This allows us to get destination metadata including identity for HTTP requests which target an IP address in the cluster, Prometheus metrics scrape requests, for example.
This change allowed us to update the "direct edges" test which ensures that the edges command produces correct output for traffic which is addressed directly to a pod IP.
We also re-enabled the "linkerd stat" integration tests which had been disabled while the destination service did not yet support these types of IP queries.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Some `linkerd stat` test failures were being hidden
`linkerd stat` was doing an early `os.Exit(0)` when no traffic was
found, which avoided `go test` to report any test failure that ended in
that code path.
This was hiding a mismatch in the golden files for HA after the
introduction of the rolling update strategy (#4267), and the failure of
`linkerd stat trafficsplit` not returning results unless `--unmeshed` is
used. For the latter, I added the flag to the tests in order to temporarly pass
them, but the underlying issue remains to be fixed in a separate
PR.
The addition of the `--unmeshed` flag changed the rendering behavior of the
`stat` command so that resources with 0 meshed pods are not displayed by
default.
Rendering is based off the row's `MeshedPodCount` field which is currently not
set by `func trafficSplitResourceQuery`. This change sets that field now so
that in rendering, the trafficsplit resource is rendered in the output.
The reason for this not showing up in testing is addressed by #4272 where the
`stat` command behavior for no traffic is changed.
The following now works without `--unmeshed` flag being passed:
```
❯ bin/linkerd stat -A ts
NAMESPACE NAME APEX LEAF WEIGHT SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99
default backend-traffic-split backend-svc backend-svc 500m - - - - -
default backend-traffic-split backend-svc failing-svc 0 - - - - -
```
## Motivation
Introduces an `unmeshed` flag to the `stat` command so that users can opt-in
to viewing unmeshed resources in the `stat` output.
This changes the existing behavior of the `stat` command such that unmeshed
resources no longer render by default in the output.
Before:
```
❯ bin/linkerd stat -A deploy
NAMESPACE NAME MESHED SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99 TCP_CONN
kube-system coredns 0/1 - - - - - -
kube-system local-path-provisioner 0/1 - - - - - -
kube-system metrics-server 0/1 - - - - - -
kube-system traefik 0/1 - - - - - -
linkerd linkerd-controller 1/1 100.00% 0.3rps 1ms 2ms 2ms 2
linkerd linkerd-destination 1/1 100.00% 0.3rps 1ms 1ms 1ms 11
...
```
After:
```
❯ bin/linkerd stat -A deploy
NAMESPACE NAME MESHED SUCCESS RPS LATENCY_P50 LATENCY_P95 LATENCY_P99 TCP_CONN
linkerd linkerd-controller 1/1 100.00% 0.3rps 1ms 1ms 1ms 2
linkerd linkerd-destination 1/1 100.00% 0.3rps 1ms 2ms 2ms 13
...
```
Closes#3871
## Solution
Using the meshed pod count in the stat response, resources with a count of `0`
are not rendered in the table.
The `-l`/`--selector` flag do not work for all resource types, so applying a
default label does not solve this problem. While it works for pods, it does
not work for deployments as the `linkerd.io/inject` is an annotation that
cannot be selected on.
I did not think a shorthand flag was necessary for this. I do not think users
will commonly pass this flag to the `stat` command, and I didn't think adding
an additional short flag such as `u` was necessary.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This PR adds support for CronJobs and ReplicaSets to `linkerd inject`, the web
dashboard and CLI. It adds a new Grafana dashboard for each kind of resource.
Closes#3614Closes#3630Closes#3584Closes#3585
Signed-off-by: Sergio Castaño Arteaga tegioz@icloud.com
Signed-off-by: Cintia Sanchez Garcia cynthiasg@icloud.com
* Traffic split integration test
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Address comments
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Display placeholder when there is no basic stats data
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
This PR adds `trafficsplit` as a supported resource for the `linkerd stat` command. Users can type `linkerd stat ts` to see the apex and leaf services of their trafficsplits, as well as metrics for those leaf services.
kubectl introduced `-A` as a shorthand for `--all-namespaces` in
`v1.14.0`:
https://github.com/kubernetes/kubernetes/pull/72006
Update linkerd cli's `edges`, `get`, and `stat` commands to match this
convention.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
Allow the TCP CONNECTIONS column to be shown on all stat queries in the CLI.
This column will now be called TCP_CONN for brevity.
Read/Write bytes will still only be shown on -o wide or -o json
Currently, cli/cmd/root.go provides a couple of utilities for building
clients to Linkerd's Public API; however these utilities are infallible,
execute health checks, etc.
There are a class of API clients---for instance, when an inject command
wants to acquire configuration from the API---where these checks are
undesirable. The version CLI built such a client, for example.
This change consolidates the various utilities into a single file.
Furthermore, it renames these utilities to clarify they differ.
Show TCP stats in the linkerd stat output. They are not shown by default, but
will be queried when using -o wide or -o json.
Also display read/write bytes as bytes per sec in the CLI and dashboard.
goconst finds repeated strings that could be replaced by a constant:
https://github.com/jgautheron/goconst
Part of #217
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Proxy API service lacked introspection of its internal state.
Introduce a new gRPC Discovery API, implemented by two servers:
1) Proxy API Server: returns a snapshot of discovery state
2) Public API Server: pass-through to the Proxy API Server
Also wire up a new `linkerd endpoints` command.
Fixes#2165
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
This is a followup branch from #2023:
- delete `proxy/client.go`, move code to `destination-client`
- move `RenderTapEvent` and stat functions from `util` to `cmd`
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
If the `linkerd routes` command gets two routes with the same name, it will only display one of them, even if the routes are from different services. This is particularly obvious with the default `[UNKNOWN]` route.
We now display all routes, even if they have the same name.
Signed-off-by: Alex Leong <alex@buoyant.io>
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
Filtering by Kubernetes job was not supported. Also filtering by any unknown
type caused a panic.
Add filtering support by Kubernetes job, with special case mapping `job` to
`k8s_job`, to not conflict with Prometheus' job label.
Fix panic when unknown type specified as a `--from` or `--to` flag.
Fix `job` label from `linkerd-proxy` overwriting Prometheus `job` label at
collection time. This caused all metrics collected by proxy sidecars in
Kubernetes jobs to be collected into an incorrect Prometheus job, rather than
the expected `linkerd-proxy` Prometheus job.
Fix `unsupported resource type` tap error message incorrectly printing the
target resource rather than the destination.
Set `--controller-log-level debug` in `install_test.go` for easier debugging.
Expose `slow-cooker`'s metrics via a k8s service in the tap integration test, to
validate proxy requests with a job as destination.
Fixes#1872
Part of #627
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add a routes command which displays per-route stats for services that have service profiles defined.
This change has three parts:
* A new public-api RPC called `TopRoutes` which serves per-route stat data about a service
* An implementation of TopRoutes in the public-api service. This implementation reads per-route data from Prometheus. This is very similar to how the StatSummaries RPC and much of the code was able to be refactored and shared.
* A new CLI command called `routes` which displays the per-route data in a tabular or json format. This is very similar to the `stat` command and much of the code was able to be refactored and shared.
Note that as of the currently targeted proxy version, only outbound route stats are supported so the `--from` flag must be included in order to see data. This restriction will be lifted in an upcoming change once we add support for inbound route stats as well.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Refactor util.BuildResource so it can deal with multiple resources
First step to address #1487: Allow stat summary to query for multiple
resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update the stat cli help text to explain the new multi resource querying ability
Propsal for #1487: Allow stat summary to query for multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow stat summary to query for multiple resources
Implement this ability by issuing parallel requests to requestStatsFromAPI()
Proposal for #1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Update tests as part of multi-resource support in `linkerd stat` (#1487)
- Refactor stat_test.go to reuse the same logic in multiple tests, and
add cases and files for json output.
- Add a couple of cases to api_utils_test.go to test multiple resources
validation.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` called with multiple resources should keep an ordering (#1487)
Add SortedRes holding the order of resources to be followed when
querying `linkerd stat` with multiple resources
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Extra validations for `linkerd stat` with multiple resources (#1487)
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* `linkerd stat` resource grouping, ordering and name prefixing (#1487)
- Group together stats per resource type.
- When more than one resource, prepend name with type.
- Make sure tables always appear in the same order.
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Allow `linkerd stat` to be called with multiple resources
A few final refactorings as per code review.
Fixes#1487
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
Added support for json output in `linkerd stat` through a new (-o|--output)=json option.
Fixes#1417
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
Closes#776.
This branch adds the following validation to the `linkerd stat` command:
* The `--to` and `--from` flags are now mutually exclusive
* The `--to-namespace` and `--from-namespace` commands are also mutually
exclusive.
* The `namespace` resource type conflicts with the `--namespace`,
`--to-namespace`, and `--from-namespace` flags.
Examples:
```
$ bin/go-run cli/main.go stat deploy --to deploy/foo --from deploy/bar
Error: --to and --from flags are mutually exclusive
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat deploy --to-namespace foo --from-namespace bar
Error: --to-namespace and --from-namespace flags are mutually exclusive
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat namespace foo --namespace bar
Error: --namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat ns --to-namespace bar
Error: --to-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat namespace --from-namespace bar
Error: --from-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
```
$ bin/go-run cli/main.go stat ns/foo --from-namespace bar
Error: --from-namespace flag is incompatible with namespace resource type
Usage:
linkerd stat [flags] (RESOURCE)
...
```
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
This PR begins to migrate Conduit to Linkerd2:
* The proxy has been completely removed from this repo, and is now located at
github.com/linkerd/linkerd2-proxy.
* A `Dockerfile-proxy` has been added to fetch the most-recently published proxy
binary from build.l5d.io.
* Proxy-specific protobuf bindings have been moved to
github.com/linkerd/linkerd2-proxy-api.
* All docker images now use the gcr.io/linkerd-io registry.
* `inject` now uses `LINKERD2_PROXY_` environment variables
* Go paths have been updated to reflect the new (future) repo location.
Adds the ability to query by a new non-kubernetes resource type, "authorities",
in the StatSummary api.
This includes an extensive refactor of stat_summary.go to deal with non-kubernetes
resource types.
- Add documentation to Resource in the public api so we can use it for authority
- Handle non-k8s resource requests in the StatSummary endpoint
- Rewrite stat summary fetching and parsing to handle non-k8s resources
- keys stat summary metric handling by Resource instead of a generated string
- Adds authority to the CLI
- Adds /authorities to the Web UI
- Adds some more stat integration and unit tests
Don't allow the CLI or Web UI to request named resources if --all-namespaces is used.
This follows kubectl, which also does not allow requesting named resources
over all namespaces.
This PR also updates the Web API's behaviour to be in line with the CLI's.
Both will now default to the default namespace if no namespace is specified.
Problem
`conduit stat` would cause a panic for any resource that wasn't in the list
of StatAllResourceTypes
This bug was introduced by https://github.com/runconduit/conduit/pull/1088/files
Solution
Fix writeStatsToBuffer to not depend on what resources are in StatAllResourceTypes
Also adds a unit test and integration test for `conduit stat ns`
Previously, in conduit stat all we would just print the map of stat results, which
resulted in the order in which stats were displayed varying between prints.
Fix:
Define an array, k8s.StatAllResourceTypes and use the order in this array to print
the map; ensuring a consistent print order every time the command is run.
Rajat Jindal
Alejandro Pedraza
Alex Leong
Kevin Leimkuhler
Mayank Shah
Sergio C. Arteaga
Zahari Dichev
Carol A. Scott
ethan
Andrew Seigner
Jonathan Juares Beber
harsh jain
Risha Mars
Oliver Gould
Tarun Pothulapati
Andrew Seigner
Ivan Sim
zak
Alejandro Pedraza
Radu M
Alena Varkockova
Kevin Lingerfelt
Eliza Weisman