# Changes ## edge-20.12.4 This edge release adds support for the `config.linkerd.io/opaque-ports` annotation on pods and namespaces, to configure ports that should skip the proxy's protocol detection. In addition, it adds new CLI commands related to the `linkerd-jaeger` extension, fixes bugs in the CLI `install` and `upgrade` commands and Helm charts, and fixes a potential false positive in the proxy's HTTP protocol detection. Finally, it includes improvements in proxy performance and memory usage, including an upgrade for the proxy's dependency on the Tokio async runtime. * Added support for the `config.linkerd.io/opaque-ports` annotation on pods and namespaces, to indicate to the proxy that some ports should skip protocol detection * Fixed an issue where `linkerd install --ha` failed to honor flags * Fixed an issue where `linkerd upgrade --ha` can override existing configs * Added missing label to the `linkerd-config-overrides` secret to avoid breaking upgrades performed with the help of `kubectl apply --prune` * Added a missing icon to Jaeger Helm chart * Added new `linkerd jaeger check` CLI command to validate that the `linkerd-jaeger` extension is working correctly * Added new `linkerd jaeger uninstall` CLI command to print the `linkerd-jaeger` extension's resources so that they can be piped into `kubectl delete` * Fixed an issue where the `linkerd-cni` daemgitonset may not be installed on all intended nodes, due to missing tolerations to the `linkerd-cni` Helm chart (thanks @rish-onesignal!) * Fixed an issue where the `tap` APIServer would not refresh its certs automatically when provided externally—like through cert-manager * Changed the proxy's cache eviction strategy to reduce memory consumption, especially for busy HTTP/1.1 clients * Fixed an issue in the proxy's HTTP protocol detection which could cause false positives for non-HTTP traffic * Increased the proxy's default dispatch timeout to 5 seconds to accomodate connection pools which might open conenctions without immediately making a request * Updated the proxy's Tokio dependency to v0.3 ## edge-20.12.3 This edge release is functionally the same as `edge-20.12.2`. It fixes an issue that prevented the release build from occurring. ## edge-20.12.2 * Fixed an issue where the `proxy-injector` and `sp-validator` did not refresh their certs automatically when provided externally—like through cert-manager * Added support for overrides flags to the `jaeger install` command to allow setting Helm values when installing the Linkerd-jaeger extension * Added missing Helm values to the multicluster chart (thanks @DaspawnW!) * Moved tracing functionality to the `linkerd-jaeger` extension * Fixed various issues in developer shell scripts (thanks @joakimr-axis!) * Fixed an issue where `install --ha` was only partially applying the high availability config * Updated RBAC API versions in the CNI chart (thanks @glitchcrab!) * Fixed an issue where TLS credentials are changed during upgrades, but the Linkerd webhooks would not restart, leaving them to use older credentials and fail requests * Stopped publishing the multicluster link chart as its primary use case is in the `multicluster link` command and not being installed through Helm * Added service mirror error logs for when the multicluster gateway's hostname cannot be resolved. ## edge-20.12.1 This edge release continues the work of decoupling non-core Linkerd components by moving more tracing related functionality into the Linkerd-jaeger extension. * Continued work on moving tracing functionality from the main control plane into the `linkerd-jaeger` extension * Fixed a potential panic in the proxy when looking up a socket's peer address while under high load * Added automatic readme generation for charts (thanks @GMarkfjard!) * Fixed zsh completion for the CLI (thanks @jiraguha!) * Added support for multicluster gateways of types other than LoadBalancer (thanks @DaspawnW!) ## edge-20.11.5 This edge release improves the proxy's support high-traffic workloads. It also contains the first steps towards decoupling non-core Linkerd components, the first iteration being a new `linkerd jaeger` sub-command for installing tracing. Please note this is still a work in progress. * Addressed some issues reported around clients seeing max-concurrency errors by increasing the default in-flight request limit to 100K pending requests * Have the proxy appropriately set `content-type` when synthesizing gRPC error responses * Bumped the `proxy-init` image to `v1.3.8` which is based off of `buster-20201117-slim` to reduce potential security vulnerabilities * No longer panic in rare cases when `linkerd-config` doesn't have an entry for `Global` configs (thanks @hodbn!) * Work in progress: the `/jaeger` directory now contains the charts and commands for installing the tracing component. ## edge-20.11.4 * Fixed an issue in the destination service where endpoints always included a protocol hint, regardless of the controller label being present or not ## edge-20.11.3 This edge release improves support for CNI by properly handling parameters passed to the `nsenter` command, relaxes checks on root and intermediate certificates (following X509 best practices), and fixes two issues: one that prevented installation of the control plane into a custom namespace and one which failed to update endpoint information when a headless service is modified. This release also improves linkerd proxy performance by eliminating unnecessary endpoint resolutions for TCP traffic and properly tearing down serverside connections when errors occur. * Added HTTP/2 keepalive PING frames * Removed logic to avoid redundant TCP endpoint resolution * Fixed an issue where serverside connections were not torn down when an error occurs * Updated `linkerd check` so that it doesn't attempt to validate the subject alternative name (SAN) on root and intermediate certificates. SANs for leaf certificates will continue to be validated * Fixed a CLI issue where the `linkerd-namespace` flag is not honored when passed to the `install` and `upgrade` commands * Fixed an issue where the proxy does not receive updated endpoint information when a headless service is modified * Updated the control plane Docker images to use `buster-20201117-slim` to reduce potential security vulnerabilities * Updated the proxy-init container to `v1.3.7` which fixes CNI issues in certain environments by properly parsing `nsenter` args ## edge-20.11.2 This edge release reduces memory consumption of Linkerd proxies which maintain many idle connections (such as Prometheus). It also removes some obsolete commands from the CLI and allows setting custom annotations on multicluster gateways. * Reduced the default idle connection timeout to 5s for outbound clients and 20s for inbound clients to reduce the proxy's memory footprint, especially on Prometheus instances * Added support for setting annotations on the multicluster gateway in Helm which allows setting the load balancer as internal (thanks @shaikatz!) * Removed the `get` and `logs` command from the CLI ## stable-2.9.0 This release extends Linkerd's zero-config mutual TLS (mTLS) support to all TCP connections, allowing Linkerd to transparently encrypt and authenticate all TCP connections in the cluster the moment it's installed. It also adds ARM support, introduces a new multi-core proxy runtime for higher throughput, adds support for Kubernetes service topologies, and lots, lots more, as described below: * Proxy * Performed internal improvements for lower latencies under high concurrency * Reduced performance impact of logging, especially when the `debug` or `trace` log levels are disabled * Improved error handling for DNS errors encountered when discovering control plane addresses; this can be common during installation before all components have been started, allowing linkerd to continue to operate normally in HA during node outages * Control Plane * Added support for [topology-aware service routing](https://kubernetes.io/docs/concepts/services-networking/service-topology/) to the Destination controller; when providing service discovery updates to proxies the Destination controller will now filter endpoints based on the service's topology preferences * Added support for the new Kubernetes [EndpointSlice](https://kubernetes.io/docs/concepts/services-networking/endpoint-slices/) resource to the Destination controller; Linkerd can be installed with `--enable-endpoint-slices` flag to use this resource rather than the Endpoints API in clusters where this new API is supported * Dashboard * Added new Spanish translations (please help us translate into your language!) * Added new section for exposing multicluster gateway metrics * CLI * Renamed the `--addon-config` flag to `--config` to clarify this flag can be used to set any Helm value * Added fish shell completions to the `linkerd` command * Multicluster * Replaced the single `service-mirror` controller with separate controllers that will be installed per target cluster through `linkerd multicluster link` * Changed the mechanism for mirroring services: instead of relying on annotations on the target services, now the source cluster should specify which services from the target cluster should be exported by using a label selector * Added support for creating multiple service accounts when installing multicluster with Helm to allow more granular revocation * Added a multicluster `unlink` command for removing multicluster links * Prometheus * Moved Linkerd's bundled Prometheus into an add-on (enabled by default); this makes the Linkerd Prometheus more configurable, gives it a separate upgrade lifecycle from the rest of the control plane, and allows users to disable the bundled Prometheus instance * The long-awaited Bring-Your-Own-Prometheus case has been finally addressed: added `global.prometheusUrl` to the Helm config to have linkerd use an external Prometheus instance instead of the one provided by default * Added an option to persist data to a volume instead of memory, so that historical metrics are available when Prometheus is restarted * The helm chart can now configure persistent storage and limits * Other * Added a new `linkerd.io/inject: ingress` annotation and accompanying `--ingress` flag to the `inject` command, to configure the proxy to support service profiles and enable per-route metrics and traffic splits for HTTP ingress controllers * Changed the type of the injector and tap API secrets to `kubernetes.io/tls` so they can be provisioned by cert-manager * Changed default docker image repository to `ghcr.io` from `gcr.io`; **Users who pull the images into private repositories should take note of this change** * Introduced support for authenticated docker registries * Simplified the way that Linkerd stores its configuration; configuration is now stored as Helm values in the `linkerd-config` ConfigMap * Added support for Helm configuration of per-component proxy resources requests This release includes changes from a massive list of contributors. A special thank-you to everyone who helped make this release possible: [Abereham G Wodajie](https://github.com/Abrishges), [Alexander Berger](https://github.com/alex-berger), [Ali Ariff](https://github.com/aliariff), [Arthur Silva Sens](https://github.com/ArthurSens), [Chris Campbell](https://github.com/campbel), [Daniel Lang](https://github.com/mavrick), [David Tyler](https://github.com/DaveTCode), [Desmond Ho](https://github.com/DesmondH0), [Dominik Münch](https://github.com/muenchdo), [George Garces](https://github.com/jgarces21), [Herrmann Hinz](https://github.com/HerrmannHinz), [Hu Shuai](https://github.com/hs0210), [Jeffrey N. Davis](https://github.com/penland365), [Joakim Roubert](https://github.com/joakimr-axis), [Josh Soref](https://github.com/jsoref), [Lutz Behnke](https://github.com/cypherfox), [MaT1g3R](https://github.com/MaT1g3R), [Marcus Vaal](https://github.com/mvaal), [Markus](https://github.com/mbettsteller), [Matei David](https://github.com/mateiidavid), [Matt Miller](https://github.com/mmiller1), [Mayank Shah](https://github.com/mayankshah1607), [Naseem](https://github.com/naseemkullah), [Nil](https://github.com/c-n-c), [OlivierB](https://github.com/olivierboudet), [Olukayode Bankole](https://github.com/rbankole), [Paul Balogh](https://github.com/javaducky), [Rajat Jindal](https://github.com/rajatjindal), [Raphael Taylor-Davies](https://github.com/tustvold), [Simon Weald](https://github.com/glitchcrab), [Steve Gray](https://github.com/steve-gray), [Suraj Deshmukh](https://github.com/surajssd), [Tharun Rajendran](https://github.com/tharun208), [Wei Lun](https://github.com/WLun001), [Zhou Hao](https://github.com/zhouhao3), [ZouYu](https://github.com/Hellcatlk), [aimbot31](https://github.com/aimbot31), [iohenkies](https://github.com/iohenkies), [memory](https://github.com/memory), and [tbsoares](https://github.com/tbsoares) ## edge-20.11.1 This edge supersedes edge-20.10.6 as a release candidate for stable-2.9.0. * Fixed issue where the `check` command would error when there is no Prometheus configured * Fixed recent regression that caused multicluster on EKS to not work properly * Changed the `check` command to warn instead of error when webhook certificates are near expiry * Added the `--ingress` flag to the `inject` command which adds the recently introduced `linkerd.io/inject: ingress` annotation * Fixed issue with upgrades where external certs would be fetched and stored even though this does not happen on fresh installs with externally created certs * Fixed issue with upgrades where the issuer cert expiration was being reset * Removed the `--registry` flag from the `multicluster install` command * Removed default CPU limits for the proxy and control plane components in HA mode ## edge-20.10.6 This edge supersedes edge-20.10.5 as a release candidate for stable-2.9.0. It adds a new `linkerd.io/inject: ingress` annotation to support service profiles and enable per-route metrics and traffic splits for HTTP ingress controllers * Added a new `linkerd.io/inject: ingress` annotation to configure the proxy to support service profiles and enable per-route metrics and traffic splits for HTTP ingress controllers * Reduced performance impact of logging in the proxy, especially when the `debug` or `trace` log levels are disabled * Fixed spurious warnings logged by the `linkerd profile` CLI command ## edge-20.10.5 This edge supersedes edge-20.10.4 as a release candidate for stable-2.9.0. It adds a fix for updating the destination service when there are no endpoints * Added a fix to clear the EndpointTranslator state when it gets a `NoEndpoints` message. This ensures that the clients get the correct set of endpoints during an update. ## edge-20.10.4 This edge release is a release candidate for stable-2.9.0. For the proxy, there have been changes to improve performance, remove unused code, and configure ports that can be ignored by default. Also, this edge release adds enhancements to the multicluster configuration and observability, adds more translations to the dashboard, and addresses a bug in the CLI. * Added more Spanish translations to the dashboard and more labels that can be translated * Added support for creating multiple service accounts when installing multicluster with Helm to allow more granular revocation * Renamed `global.proxy.destinationGetNetworks` to `global.clusterNetworks`. This is a cluster-wide setting and can no longer be overridden per-pod * Fixed an empty multicluster Grafana graph which used a deprecated label * Added the control plane tracing ServiceAccounts to the linkerd-psp RoleBinding so that it can be used in environments where PodSecurityPolicy is enabled * Enhanced EKS support by adding `100.64.0.0/10` to the set of discoverable networks * Fixed a bug in the way that the `--all-namespaces` flag is handled by the `linkerd edges` command * Added a default set of ports to bypass the proxy for server-first, https, and memcached traffic ## edge-20.10.3 This edge release is a release candidate for stable-2.9.0. It overhauls the discovery and routing logic implemented by the proxy, simplifies the way that Linkerd stores configuration, and adds new Helm values to configure additional labels, annotations, and namespace selectors for webhooks. * Added podLabels and podAnnotations Helm values to allow adding additional labels or annotations to Linkerd control plane pods (thanks @tustvold!) * Added namespaceSelector Helm value for configuring the namespace selector used by admission webhooks (thanks @tustvold!) * Expanded the 'linkerd edges' command to show TCP connections * Overhauled the discovery and routing logic implemented by the proxy: * The `l5d-dst-override` header is no longer honored * When the application attempts to connect to a pod IP, the proxy no longer load balances these requests among all pods in the service. The proxy will now honor session-stickiness as selected by an application-level load balancer * `TrafficSplits` are only applied when a client targets a service's IP * The proxy no longer performs DNS "canonicalization" to translate relative host header names to a fully-qualified form * Simplified the way that Linkerd stores its configuration. Configuration is now stored as Helm values in the linkerd-config ConfigMap * Renamed the --addon-config flag to --config to clarify this flag can be used to set any Helm value ## edge-20.10.2 This edge release adds more improvements for mTLS for all TCP traffic. It also includes significant internal improvements to the way Linkerd configuration is stored within the cluster. * Changed TCP metrics exported by the proxy to ensure that peer identities are encoded via the `client_id` and `server_id` labels. * Removed the dependency of control plane components on `linkerd-config` * Updated the data structure `proxy-injector` uses to derive the configuration used when injecting workloads ## edge-20.10.1 This edge release includes a couple of external contributions towards improved cert-manager support and Grafana charts fixes, among other enhancements. * Changed the type of the injector and tap API secrets to `kubernetes.io/tls`, so they can be provisioned by cert-manager (thanks @cypherfox!) * Fixed the "Kubernetes cluster monitoring" Grafana dashboard that had a few charts with incomplete data (thanks @aimbot31!) * Fixed the `service-mirror` multicluster component so that it retries connections to the target cluster's Kubernetes API when it's not reachable, instead of blocking * Increased the proxy's default timeout for DNS resolution to 500ms, as there were reports that 100ms was too restrictive ## edge-20.9.4 This edge release introduces support for authenticated docker registries and fixes a recent multicluster regression. * Fixed a regression in multicluster gateway configurations that would forbid inbound gateway traffic * Upgraded bundled Grafana to v7.1.5 * Enabled Jaeger receiver in collector configuration in Helm chart (thanks @olivierboudet!) * Fixed skip port configuration being skipped in CNI plugin * Introduced support for authenticated docker registries (thanks @c-n-c!) ## edge-20.9.3 This edge release includes fixes and updates for the control plane and CLI. * Added `--dest-cni-bin-dir` flag to the `linkerd install-cni` command, to configure the directory on the host where the CNI binary will be placed * Removed `collector.name` and `jaeger.name` config fields from the tracing addon * Updated Jaeger to 1.19.2 * Fixed a warning about deprecated Go packages in controller container logs ## edge-20.9.2 This edge release continues the work of adding support for mTLS for all TCP traffic and changes the default container registry to `ghcr.io` from `gcr.io`. If you are upgrading from `stable-2.8.x` with the Linkerd CLI using the `linkerd upgrade` command, you must add the `--addon-overwrite` flag to ensure that the grafana image is properly set. * Removed the default timeout for ServiceProfiles so that ServiceProfile routes behave the same as when there is no ServiceProfile definition * Changed default docker image repository to ghcr.io from gcr.io. **Users who pull the images into private repositories should take note of this change** * Added endpoint labels to outbound TCP metrics to provide more context and detail for the metrics, add load balancing to TCP connections (bypassing kube-proxy), and secure the connection with mTLS when both endpoints are meshed * Made unnamed ServiceProfile discovery configurable using the `proxy.destinationGetNetworks` variable to set the `LINKERD2_PROXY_DESTINATION_PROFILE_NETWORKS` variable in the proxy chart template * Added TLS certificate validation for the Injector, SP Validator, and Tap webhooks to the `linkerd check` command ## edge-20.9.1 This edge release contains an important proxy update that allows linkerd to continue to operate normally in HA during node outages. We're also adding full Kubernetes 1.19 support! * Improved the proxy's error handling for DNS errors encountered when discovering control plane addresses, which can be common during installation, before all components have been started * The destination and identity services had to be made headless in order to support that new controller discovery (which now can leverage SRV records) * Use SAN fields when generating the linkerd webhook configs; this completes the Kubernetes 1.19 support which enforces them * Fixed `linkerd check` for multicluster that was spuriously claiming the absence of some resources * Improved the injection test cleanup (thanks @zhouhao3!) * Added ability to run the integration test suite using a cluster in an ARM architecture (thanks @aliariff!) ## edge-20.8.4 * Fixed a problem causing the `enable-endpoint-slices` flag to not be persisted when set via `linkerd upgrade` (thanks @Matei207!) * Removed SMI-Metrics templates and experimental sub-commands * Use `--frozen-lockfile` to avoid accidental update of dashboard JS dependencies in CI (thanks @tharun208!) ## edge-20.8.3 This edge release adds support for [topology-aware service routing][topology] to the Destination controller. When providing service discovery updates to proxies, the Destination controller will now filter endpoints based on the service's topology preferences. Additionally, this release includes bug fixes for the `linkerd check` CLI command and web dashboard. * CLI * `linkerd check` will no longer warn about a looser webhook failure policy in HA mode * Controller * Added support for [topology-aware service routing][topology] to the Destination controller (thanks @Matei207) * Changed the Destination controller to always return destination overrides for service profiles when no traffic split is present * Web UI * Fixed Tap `Authority` dropdown not being populated (thanks to @tharun208!) [topology]: https://kubernetes.io/docs/concepts/services-networking/service-topology/ ## edge-20.8.2 This edge release adds an internationalization framework to the dashboard, Spanish translations to the dashboard UI, and a `linkerd multicluster uninstall` command for graceful removal of the multicluster components. * Web UI * Added Spanish translations to the dashboard * Added a framework and documentation to simplify creation of new translations * Multicluster * Added a multicluster uninstall command * Added a warning from `linkerd check --multicluster` if the multicluster support is not installed ## edge-20.8.1 This edge adds multi-arch support to Linkerd! Our docker images and CLI now support the amd64, arm64, and arm architectures. * Multicluster * Added a multicluster unlink command for removing multicluster links * Improved multicluster checks to be more informative when the remote API is not reachable * Proxy * Enabled a multi-threaded runtime to substantially improve latency especially when the proxy is serving requests for many concurrent connections * Other * Fixed an issue where the debug sidecar image was missing during upgrades (thanks @javaducky!) * Updated all control plane plane and proxy container images to be multi-arch to support amd64, arm64, and arm (thanks @aliariff!) * Fixed an issue where check was failing when DisableHeartBeat was set to true (thanks @mvaal!) ## edge-20.7.5 This edge brings a new approach to multicluster service mirror controllers and the way services in target clusters are selected for mirroring. The long-awaited Bring-Your-Own-Prometheus case has been finally addressed. Many other improvements from our great contributors are described below. Also note progress is still being made under the covers for future support for Service Topologies (by @Matei207) and delivering image builds in multiple platforms (by @aliariff). * Multicluster * Replaced the single `service-mirror` controller, with separate controllers that will be installed per target cluster through `linkerd multicluster link`. More info [here](https://github.com/linkerd/linkerd2/pull/4710). * Changed the mechanism for mirroring services: instead of relying on annotations on the target services, now the source cluster should specify which services from the target cluster should be exported by using a label selector. More info [here](https://github.com/linkerd/linkerd2/pull/4795). * Added new section in the dashboard for exposing multicluster gateway metrics (thanks @tharun208!) * Prometheus * Added `global.prometheusUrl` to the Helm config to have linkerd use an external Prometheus instance instead of the one provided by default. * Added ability to declare sidecar containers in the Prometheus Helm config. This allows adding components for cases like exporting logs to services such as Cloudwatch, Stackdriver, Datadog, etc. (thanks @memory!) * Upgraded Prometheus to the latest version (v2.19.3), which should consume substantially less memory, among other benefits. * Other * Fixed bug in `linkerd check` that was failing to wait for Prometheus to be available right after having installed linkerd. * Added ability to set `priorityClassName` for CNI DaemonSet pods, and to install CNI in an existing namespace (both options provided through the CLI and as Helm configs) (thanks @alex-berger!) * Added support for overriding the proxy's inbound and outbound TCP connection timeouts (thanks @mmiller1!) * Added library support for dashboard i18n. Strings still need to be tagged and translations to be added. More info [here](https://github.com/linkerd/linkerd2/pull/4803). * In some Helm charts, replaced the non-standard `linkerd.io/helm-release-version` annotation with `checksum/config` for forcing restarting the component during upgrades (thanks @naseemkullah!) * Upgraded the proxy init-container to v1.3.4, which comes with an updated debian-buster distro and will provide cleaner logs listing the iptables rules applied. ## edge-20.7.4 This edge release adds support for the new Kubernetes [EndpointSlice](https://kubernetes.io/docs/concepts/services-networking/endpoint-slices/) resource to the Destination controller. Using the EndpointSlice API is more efficient for the Kubernetes control plane than using the Endpoints API. If the cluster supports EndpointSlices (a beta feature in Kubernetes 1.17), Linkerd can be installed with `--enable-endpoint-slices` flag to use this resource rather than the Endpoints API. * Added fish shell completions to the `linkerd` command (thanks @WLun001!) * Enabled the support for EndpointSlices (thanks @Matei207!) * Separated Prometheus checks and made them runnable only when the add-on is enabled ## edge-20.7.3 * Add preliminary support for EndpointSlices which will be usable in future releases (thanks @Matei207!) * Internal improvements to the CI process for testing Helm installations ## edge-20.7.2 This edge release moves Linkerd's bundled Prometheus into an add-on. This makes the Linkerd Prometheus more configurable, gives it a separate upgrade lifecycle from the rest of the control plane, and will allow users to disable the bundled Prometheus instance. In addition, this release includes fixes for several issues, including a regression where the proxy would fail to report OpenCensus spans. * Prometheus is now an optional add-on, enabled by default * Custom tolerations can now be specified for control plane resources when installing with Helm (thanks @DesmondH0!) * Evicted data plane pods are no longer considered to be failed by `linkerd check --proxy`, fixing an issue where the check would be retried indefinitely as long as evicted pods are present * Fixed a regression where proxy spans were not reported to OpenCensus * Fixed a bug where the proxy injector would fail to render skipped port lists when installed with Helm * Internal improvements to the proxy for lower latencies under high concurrency * Thanks to @Hellcatlk and @surajssd for adding new unit tests and spelling fixes! ## edge-20.7.1 This edge release features the option to persist prometheus data to a volume instead of memory, so that historical metrics are available when prometheus is restarted. Additional changes are outlined in the bullet points below. * Some commands like `linkerd stat` would fail if any control plane components were unhealthy, even when other replicas are healthy. The check conditions for these commands have been improved * The helm chart can now configure persistent storage for Prometheus (thanks @naseemkullah!) * The proxy log output format can now be configured to `plain` or `json` using the `config.linkerd.io/proxy-log-format` annotation or the `global.proxy.logFormat` value in the helm chart (thanks again @naseemkullah!) * `linkerd install --addon-config=` now supports URLs in addition to local files * The CNI Helm chart used the incorrect variable name to determine the `createdBy` version tag. This is now controlled by `cniPluginVersion` in the helm chart * The proxy's default buffer size has been increased, which reduces latency when the proxy has many concurrent clients ## edge-20.6.4 This edge release moves the proxy onto a new version of the Tokio runtime. This allows us to more easily integrate with the ecosystem and may yield performance benefits as well. * Upgraded the proxy's underlying Tokio runtime and its related libraries * Added support for PKCS8 formatted ECDSA private keys * Added support for Helm configuration of per-component proxy resources requests and limits (thanks @cypherfox!) * Updated the `linkerd inject` command to throw an error while injecting non-compliant pods (thanks @mayankshah1607) ## stable-2.8.1 This release fixes multicluster gateways support on EKS. * The multicluster service-mirror has been extended to resolve DNS names for target clusters when an IP address is not known. * Linkerd checks could fail when run from the dashboard. Thanks to @alex-berger for providing a fix! * Have the service mirror controller check in `linkerd check` retry on failures. * As of this version we're including a Chocolatey package (Windows) next to the other binaries in the release assets in GitHub. * Base images have been updated: * debian:buster-20200514-slim * grafana/grafana:7.0.3 * The shell scripts under `bin` continued to be improved, thanks to @joakimr-axis! ## edge-20.6.3 This edge release is a release candidate for stable-2.8.1. It includes a fix to support multicluster gateways on EKS. * The `config.linkerd.io/proxy-destination-get-networks` annotation configures the networks for which a proxy can discover metadata. This is an advanced configuration option that has security implications. * The multicluster service-mirror has been extended to resolve DNS names for target clusters when an IP address it not known. * Linkerd checks could fail when run from the dashboard. Thanks to @alex-berger for providing a fix! * The CLI will be published for Chocolatey (Windows) on future stable releases. * Base images have been updated: * debian:buster-20200514-slim * grafana/grafana:7.0.3 ## stable-2.8.0 This release introduces new a multi-cluster extension to Linkerd, allowing it to establish connections across Kubernetes clusters that are secure, transparent to the application, and work with any network topology. * The CLI has a new set of `linkerd multicluster` sub-commands that provide tooling to create the resources needed to discover services across Kubernetes clusters. * The `linkerd multicluster gateways` command exposes gateway-specific telemetry to supplement the existing `stat` and `tap` commands. * The Linkerd-provided Grafana instance remains enabled by default, but it can now be disabled. When it is disabled, the Linkerd dashboard can be configured to link to an alternate, externally-managed Grafana instance. * Jaeger & OpenCensus are configurable as an [add-on][addon-2.8.0]; and the proxy has been improved to emit spans with labels that reflect its pod's metadata. * The `linkerd-cni` component has been promoted from _experimental_ to _stable_. * `linkerd profile --open-api` now honors the `x-linkerd-retryable` and `x-linkerd-timeout` OpenAPI annotations. * The Helm chart continues to become more flexible and modular, with new Prometheus configuration options. More information is available in the [Helm chart README][helm-2.8.0]. * gRPC stream error handling has been improved so that transport errors are indicated to the client with a `grpc-status: UNAVAILABLE` trailer. * The proxy's memory footprint could grow significantly when server-speaks-first-protocol connections hit the proxy. Now, a timeout is in place to prevent these connections from consuming resources. * After benchmarking the proxy in high-concurrency situations, the inbound proxy has been improved to reduce contention, improving latency and reducing spurious timeouts. * The proxy could fail requests to services that had only 1 request every 60 seconds. This race condition has been eliminated. * Finally, users reported that ingress misconfigurations could cause the proxy to consume an entire CPU which could lead to timeouts. The proxy now attempts to prevent the most common traffic-loop scenarios to protect against this. ***NOTE***: Linkerd's `multicluster` extension does not yet work on Amazon EKS. We expect to follow this release with a stable-2.8.1 to address this issue. Follow [#4582](https://github.com/linkerd/linkerd2/pull/4582) for updates. This release includes changes from a massive list of contributors. A special thank-you to everyone who helped make this release possible: @aliariff, @amariampolskiy, @arminbuerkle, @arthursens, @christianhuening, @christyjacob4, @cypherfox, @daxmc99, @dr0pdb, @drholmie, @hydeenoble, @joakimr-axis, @jpresky, @kohsheen1234, @lewiscowper, @lundbird, @matei207, @mayankshah1607, @mmiller1, @naseemkullah, @sannimichaelse, & @supra08. [addon-2.8.0]: https://github.com/linkerd/linkerd2/blob/4219955bdb5441c5fce192328d3760da13fb7ba1/charts/linkerd2/README.md#add-ons-configuration [helm-2.8.0]: https://github.com/linkerd/linkerd2/blob/4219955bdb5441c5fce192328d3760da13fb7ba1/charts/linkerd2/README.md ## edge-20.6.2 This edge release is our second release candidate for `stable-2.8`, including various fixes and improvements around multicluster support. * CLI * Fixed bad output in the `linkerd multicluster gateways` command * Improved the error returned when running the CLI with no KUBECONFIG path set (thanks @Matei207!) * Controller * Fixed issue where mirror service wasn't created when paired to a gateway whose external IP wasn't yet provided * Fixed issue where updating the gateway identity annotation wasn't propagated back into the mirror gateway endpoints object * Fixed issue where updating the gateway ports wasn't reflected in the gateway mirror service * Increased the log level for some of the service mirror events * Changed the nginx gateway config so that it runs as non-root and denies all requests to locations other than the probe path * Web UI * Fixed multicluster Grafana dashboard * Internal * Added flag in integration tests to dump fixture diffs into a separate directory (thanks @cypherfox!) ## edge-20.6.1 This edge release is a release candidate for `stable-2.8`! It introduces several improvements and fixes for multicluster support. * CLI * Added multicluster daisy chain checks to `linkerd check` * Added list of successful gateways in multicluster checks section of `linkerd check` * Controller * Renamed `nginx-configuration` ConfigMap to `linkerd-gateway-config` (please manually remove the former if upgrading from an earlier multicluster install, thanks @mayankshah1607!) * Renamed multicluster gateway ports to `mc-gateway` and `mc-probe` * Fixed Service Profiles routes for `linkerd-prometheus` * Internal * Fixed shellcheck errors in all `bin/` scripts (thanks @joakimr-axis!) * Helm * Added support for `linkerd mc allow` * Added ability to disable secret resources for self-signed certs (thanks @cypherfox!) * Proxy * Modified the `linkerd-gateway` component to use the inbound proxy, rather than nginx, for gateway; this allows Linkerd to detect loops and propagate identity ## edge-20.5.5 This edge release adds refinements to the Linkerd multicluster implementation, adds new health checks for the tracing add-on, and addresses an issue in which outbound requests from the proxy result in looping behavior. * CLI * Added the `multicluster` command along with subcommands to configure and deploy Linkerd workloads which enable services to be mirrored across clusters * Added health-checks for tracing add-on * Proxy * Added logic to prevent loops in outbound requests ## edge-20.5.4 * CLI * Fixed the display of the meshed pod column for non-selector services in `linkerd stat` output * Added an `addon-overwrite` upgrade flag which allows users to overwrite the existing addon config rather than merging into it * Added a `--close-wait-timeout` inject flag which sets the `nf_conntrack_tcp_timeout_close_wait` property which can be used to mitigate connection issues with application that hold half-closed sockets * Controller * Restricted the service-mirror's RBAC permissions so that it no longer is able to read secrets in all namespaces * Moved many multicluster components into the `linkerd-multicluster` namespace by default * Added multicluster gateway mirror services to allow multicluster liveness probes to work in private networks * Fixed an issue where multicluster gateway mirror services could be incorrectly deleted during a resync * Internal * Fixed many style issues in build scripts (thanks @joakimr-axis!) * Helm * Added `global.grafanaUrl` variable to allow using an existing Grafana installation ## edge-20.5.3 * Controller * Added a Grafana dashboard for tracking multi-cluster traffic metrics * Added health checks for the Grafana add-on, under a separate section * Fixed issues when updating a remote multi-cluster gateway * Proxy * Added special special handling for I/O errors in HTTP responses so that an `errno` label is included to describe the underlying errors in the proxy's metrics * Internal * Started gathering stats of CI runs for aggregating CI health metrics ## edge-20.5.2 This edge release contains everything required to get up and running with multicluster. For a tutorial on how to do that, check out the [documentation](https://linkerd.io/2/features/multicluster_support/). * CLI * Added a section to the `linkerd check` that validates that all clusters part of a multicluster setup have compatible trust anchors * Modified the `inkerd cluster export-service` command to work by transforming yaml instead of modifying cluster state * Added functionality that allows the `linkerd cluster export-service` command to operate on lists of services * Controller * Changed the multicluster gateway to always require TLS on connections originating from outside the cluster * Removed admin server timeouts from control plane components, thereby fixing a bug that can cause liveness checks to fail * Helm * Moved Grafana templates into a separate add-on chart * Proxy * Improved latency under high-concurrency use cases. ## edge-20.5.1 * CLI * Fixed all commands to use kubeconfig's default namespace if specified (thanks @Matei207!) * Added multicluster checks to the `linkerd check` command * Hid development flags in the `linkerd install` command for release builds * Controller * Added ability to configure Prometheus Alertmanager as well as recording and alerting rules on the Linkerd Prometheus (thanks @naseemkullah!) * Added ability to add more commandline flags to the Prometheus command (thanks @naseemkullah!) * Web UI * Fixed TrafficSplit detail page not loading * Added Jaeger links to the dashboard when the tracing addon is enabled * Proxy * Modified internal buffering to avoid idling out services as a request arrives, fixing failures for requests that are sent exactly once per minute--such as Prometheus scrapes ## edge-20.4.5 This edge release includes several new CLI commands for use with multi-cluster gateways, and adds liveness checks and metrics for gateways. Additionally, it makes the proxy's gRPC error-handling behavior more consistent with other implementations, and includes a fix for a bug in the web UI. * CLI * Added `linkerd cluster setup-remote` command for setting up a multi-cluster gateway * Added `linkerd cluster gateways` command to display stats for multi-cluster gateways * Changed `linkerd cluster export-service` to modify a provided YAML file and output it, rather than mutating the cluster * Controller * Added liveness checks and Prometheus metrics for multi-cluster gateways * Changed the proxy injector to configure proxies to do destination lookups for IPs in the private IP range * Web UI * Fixed errors when viewing resource detail pages * Internal * Created script and config to build a Linkerd CLI Chocolatey package for Windows users, which will be published with stable releases (thanks to @drholmie!) * Proxy * Changed the proxy to set a `grpc-status: UNAVAILABLE` trailer when a gRPC response stream is interrupted by a transport error ## edge-20.4.4 This edge release fixes a packaging issue in `edge-20.4.3`. _From `edge.20.4.3` release notes_: This edge release adds functionality to the CLI to output more detail and includes changes which support the multi-cluster functionality. Also, the helm support has been expanded to make installation more configurable. Finally, the HA reliability is improved by ensuring that control plane pods are restarted with a rolling strategy * CLI * Added output to the `linkerd check --proxy` command to list all data plane pods which are not up-to-date rather than just printing the first one it encounters * Added a `--proxy` flag to the `linkerd version` command which lists all proxy versions running in the cluster and the number of pods running each version * Lifted requirement of using --unmeshed for linkerd stat when querying TrafficSplit resources * Added support for multi-stage installs with Add-Ons * Controller * Added a rolling update strategy to Linkerd deployments that have multiple replicas during HA deployments to ensure that at most one pod begins terminating before a new pod ready is ready * Added a new label for the proxy injector to write to the template, `linkerd.io/workload-ns` which indicates the namespace of the workload/pod * Internal * Added a [security policy](https://help.github.com/en/github/managing-security-vulnerabilities/adding-a-security-policy-to-your-repository) to facilitate conversations around security * Helm * Changed charts to use downwardAPI to mount labels to the proxy container making them easier to identify * Proxy * Changed the Linkerd proxy endpoint for liveness to use the new `/live` admin endpoint instead of the `/metrics` endpoint, because the `/live` endpoint returns a smaller payload * Added a per-endpoint authority-override feature to support multi-cluster gateways ## edge-20.4.3 **This release is superseded by `edge-20.4.4`** This edge release adds functionality to the CLI to output more detail and includes changes which support the multi-cluster functionality. Also, the helm support has been expanded to make installation more configurable. Finally, the HA reliability is improved by ensuring that control plane pods are restarted with a rolling strategy * CLI * Added output to the `linkerd check --proxy` command to list all data plane pods which are not up-to-date rather than just printing the first one it encounters * Added a `--proxy` flag to the `linkerd version` command which lists all proxy versions running in the cluster and the number of pods running each version * Lifted requirement of using --unmeshed for linkerd stat when querying TrafficSplit resources * Added support for multi-stage installs with Add-Ons * Controller * Added a rolling update strategy to Linkerd deployments that have multiple replicas during HA deployments to ensure that at most one pod begins terminating before a new pod ready is ready * Added a new label for the proxy injector to write to the template, `linkerd.io/workload-ns` which indicates the namespace of the workload/pod * Internal * Added a [security policy](https://help.github.com/en/github/managing-security-vulnerabilities/adding-a-security-policy-to-your-repository) to facilitate conversations around security * Helm * Changed charts to use downwardAPI to mount labels to the proxy container making them easier to identify * Proxy * Changed the Linkerd proxy endpoint for liveness to use the new `/live` admin endpoint instead of the `/metrics` endpoint, because the `/live` endpoint returns a smaller payload * Added a per-endpoint authority-override feature to support multi-cluster gateways ## edge-20.4.2 This release brings a number of CLI fixes and Controller improvements. * CLI * Fixed a bug that caused pods to crash after upgrade if `--skip-outbound-ports` or `--skip-inbound-ports` were used * Added `unmeshed` flag to the `stat` command, such that unmeshed resources are only displayed if the user opts-in * Added a `--smi-metrics` flag to `install`, to allow installation of the experimental `linkerd-smi-metrics` component * Fixed a bug in `linkerd stat`, causing incorrect output formatting when using the `--o wide` flag * Fixed a bug, causing `linkerd uninstall` to fail when attempting to delete PSPs * Controller * Improved the anti-affinity of `linkerd-smi-metrics` deployment to avoid pod scheduling problems during `upgrade` * Improved endpoints change detection in the `linkerd-destination` service, enabling mirrored remote services to change cluster gateways * Added `operationID` field to tap OpenAPI response to prevent issues during upgrade from 2.6 to 2.7 * Proxy * Added a new protocol detection timeout to prevent clients from consuming resources indefinitely when not sending any data ## edge-20.4.1 This release introduces some cool new functionalities, all provided by our awesome community of contributors! Also two bugs were fixed that were introduced since edge-20.3.2. * CLI * Added `linkerd uninstall` command to uninstall the control plane (thanks @Matei207!) * Fixed a bug causing `linkerd routes -o wide` to not show the proper actual success rate * Controller * Fail proxy injection if the pod spec has `automountServiceAccountToken` disabled (thanks @mayankshah1607!) * Web UI * Added a route dashboard to Grafana (thanks @lundbird!) * Proxy * Fixed a bug causing the proxy's inbound to spuriously return 503 timeouts ## edge-20.3.4 This release introduces several fixes and improvements to the CLI. * CLI * Added support for kubectl-style label selectors in many CLI commands (thanks @mayankshah1607!) * Fixed the path regex in service profiles generated from proto files without a package name (thanks @amariampolskiy!) * Fixed an error when injecting Cronjobs that have no metadata * Relaxed the clock skew check to match the default node heartbeat interval on Kubernetes 1.17 and made this check a warning * Fixed a bug where the linkerd-smi-metrics pod could not be created on clusters with pod security policy enabled * Internal * Upgraded tracing components to more recent versions and improved resource defaults (thanks @Pothulapati!) ## edge-20.3.3 This release introduces new experimental CLI commands for querying metrics using the Service Mesh Interface (SMI) and for multi-cluster support via service mirroring. If you would like to learn more about service mirroring or SMI, or are interested in experimenting with these features, please join us in [Linkerd Slack](https://slack.linkerd.io) for help and feedback. * CLI * Added experimental `linkerd cluster` commands for managing multi-cluster service mirroring * Added the experimental `linkerd alpha clients` command, which uses the smi-metrics API to display client-side metrics from each of a resource's clients * Added retries to some `linkerd check` checks to prevent spurious failures when run immediately after cluster creation or Linkerd installation ## edge-20.3.2 This release introduces substantial proxy improvements as well as new observability and security functionality. * CLI * Added the `linkerd alpha stat` command, which uses the smi-metrics API; the latter enables access to metrics to be controlled with RBAC * Controller * Added support for configuring service profile timeouts `(x-linkerd-timeout)` via OpenAPI spec (thanks @lewiscowper!) * Web UI * Improved the Grafana dashboards to use a globing operator for Prometheus in order to avoid producing queries that are too large (thanks @mmiller1!) * Helm * Improved the `linkerd2` chart README (thanks @lundbird!) * Proxy * Fixed a bug that could cause log levels to be processed incorrectly ## edge-20.3.1 This release introduces new functionality mainly focused around observability and multi-cluster support via `service mirroring`. If you would like to learn more about `service mirroring` or are interested in experimenting with this feature, please join us in [Linkerd Slack](https://slack.linkerd.io) for help and feedback. * CLI * Improved the `linkerd check` command to check for extension server certificate (thanks @christyjacob4!) * Controller * Removed restrictions preventing Linkerd from injecting proxies into Contour (thanks @alfatraining!) * Added an experimental version of a service mirroring controller, allowing discovery of services on remote clusters. * Web UI * Fixed a bug causing incorrect Grafana links to be rendered in the web dashboard. * Proxy * Fixed a bug that could cause the proxy's load balancer to stop processing updates from service discovery. ## edge-20.2.3 This release introduces the first optional add-on `tracing`, added through the new add-on model! The existing optional `tracing` components Jaeger and OpenCensus can now be installed as add-on components. There will be more information to come about the new add-on model, but please refer to the details of [#3955](https://github.com/linkerd/linkerd2/pull/3955) for how to get started. * CLI * Added the `linkerd diagnostics` command to get metrics only from the control plane, excluding metrics from the data plane proxies (thanks @srv-twry!) * Added the `linkerd install --prometheus-image` option for installing a custom Prometheus image (thanks @christyjacob4!) * Fixed an issue with `linkerd upgrade` where changes to the `Namespace` object were ignored (thanks @supra08!) * Controller * Added the `tracing` add-on which installs Jaeger and OpenCensus as add-on components (thanks @Pothulapati!!) * Proxy * Increased the inbound router's default capacity from 100 to 10k to accommodate environments that have a high cardinality of virtual hosts served by a single pod * Web UI * Fixed styling in the CallToAction banner (thanks @aliariff!) ## edge-20.2.2 This release includes the results from continued profiling & performance analysis on the Linkerd proxy. In addition to modifying internals to prevent unwarranted memory growth, new metrics were introduced to aid in debugging and diagnostics. Also, Linkerd's CNI plugin is out of experimental, check out the docs at ! * CLI * Added support for label selectors in the `linkerd stat` command (thanks @mayankshah1607!) * Added scrolling functionality to the `linkerd top` output (thanks @kohsheen1234!) * Fixed bug in `linkerd metrics` that was causing a panic when port-forwarding failed (thanks @mayankshah1607!) * Added check to `linkerd check` verifying the number of replicas for Linkerd components in HA (thanks @mayankshah1607!) * Unified trust anchors terminology across the CLI commands * Removed some messages from `linkerd upgrade`'s output that are no longer relevant (thanks @supra08!) * Controller * Added support for configuring service profile retries `(x-linkerd-retryable)` via OpenAPI spec (thanks @kohsheen1234!) * Improved traffic split metrics so sources in all namespaces are shown, not just traffic from the traffic split's own namespace * Improved linkerd-identity's logs and events to help diagnosing certificate validation issues (thanks @mayankshah1607!) * Proxy * Added `request_errors_total` metric exposing the number of requests that receive synthesized responses due to proxy errors * Helm * Added a new `enforcedHostRegexp` variable to allow configuring the linkerd-web component enforced host (that was previously introduced to protect against DNS rebinding attacks) (thanks @sannimichaelse!) * Internal * Removed various es-lint warnings from the dashboard code (thanks @christyjacob4 and @kohsheen1234!) * Fixed go module file syntax (thanks @daxmc99!) ## stable-2.7.0 This release adds support for integrating Linkerd's PKI with an external certificate issuer such as [`cert-manager`] as well as streamlining the certificate rotation process in general. For more details about cert-manager and certificate rotation, see the [docs](https://linkerd.io/2/tasks/use_external_certs/). This release also includes performance improvements to the dashboard, reduced memory usage of the proxy, various improvements to the Helm chart, and much much more. To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: This release includes breaking changes to our Helm charts. Please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-270). **Special thanks to**: @alenkacz, @bmcstdio, @daxmc99, @droidnoob, @ereslibre, @javaducky, @joakimr-axis, @JohannesEH, @KIVagant, @mayankshah1607, @Pothulapati, and @StupidScience! **Full release notes**: * CLI * Updated the mTLS trust anchor checks to eliminate false positives caused by extra trailing spaces * Reduced the severity level of the Linkerd version checks, so that they don't fail when the external version endpoint is unreachable (thanks @mayankshah1607!) * Added a new `tap` APIService check to aid with uncovering Kubernetes API aggregation layer issues (thanks @droidnoob!) * Introduced CNI checks to confirm the CNI plugin is installed and ready; this is done through `linkerd check --pre --linkerd-cni-enabled` before installation and `linkerd check` after installation if the CNI plugin is present * Added support for the `--as-group` flag so that users can impersonate groups for Kubernetes operations (thanks @mayankshah1607!) * Added HA specific checks to `linkerd check` to ensure that the `kube-system` namespace has the `config.linkerd.io/admission-webhooks:disabled` label set * Fixed a problem causing the presence of unnecessary empty fields in generated resource definitions (thanks @mayankshah1607) * Added the ability to pass both port numbers and port ranges to `--skip-inbound-ports` and `--skip-outbound-ports` (thanks to @javaducky!) * Increased the comprehensiveness of `linkerd check --pre` * Added TLS certificate validation to `check` and `upgrade` commands * Added support for injecting CronJobs and ReplicaSets, as well as the ability to use them as targets in the CLI subcommands * Introduced the new flags `--identity-issuer-certificate-file`, `--identity-issuer-key-file` and `identity-trust-anchors-file` to `linkerd upgrade` to support trust anchor and issuer certificate rotation * Added a check that ensures using `--namespace` and `--all-namespaces` results in an error as they are mutually exclusive * Added a `Dashboard.Replicas` parameter to the Linkerd Helm chart to allow configuring the number of dashboard replicas (thanks @KIVagant!) * Removed redundant service profile check (thanks @alenkacz!) * Updated `uninject` command to work with namespace resources (thanks @mayankshah1607!) * Added a new `--identity-external-issuer` flag to `linkerd install` that configures Linkerd to use certificates issued by an external certificate issuer (such as `cert-manager`) * Added support for injecting a namespace to `linkerd inject` (thanks @mayankshah1607!) * Added checks to `linkerd check --preinstall` ensuring Kubernetes Secrets can be created and accessed * Fixed `linkerd tap` sometimes displaying incorrect pod names for unmeshed IPs that match multiple running pods * Made `linkerd install --ignore-cluster` and `--skip-checks` faster * Fixed a bug causing `linkerd upgrade` to fail when used with `--from-manifest` * Made `--cluster-domain` an install-only flag (thanks @bmcstdio!) * Updated `check` to ensure that proxy trust anchors match configuration (thanks @ereslibre!) * Added condition to the `linkerd stat` command that requires a window size of at least 15 seconds to work properly with Prometheus * Controller * Fixed an issue where an override of the Docker registry was not being applied to debug containers (thanks @javaducky!) * Added check for the Subject Alternate Name attributes to the API server when access restrictions have been enabled (thanks @javaducky!) * Added support for arbitrary pod labels so that users can leverage the Linkerd provided Prometheus instance to scrape for their own labels (thanks @daxmc99!) * Fixed an issue with CNI config parsing * Fixed a race condition in the `linkerd-web` service * Updated Prometheus to 2.15.2 (thanks @Pothulapati) * Increased minimum kubernetes version to 1.13.0 * Added support for pod ip and service cluster ip lookups in the destination service * Added recommended kubernetes labels to control-plane * Added the `--wait-before-exit-seconds` flag to linkerd inject for the proxy sidecar to delay the start of its shutdown process (a huge commit from @KIVagant, thanks!) * Added a pre-sign check to the identity service * Fixed inject failures for pods with security context capabilities * Added `conntrack` to the `debug` container to help with connection tracking debugging * Fixed a bug in `tap` where mismatch cluster domain and trust domain caused `tap` to hang * Fixed an issue in the `identity` RBAC resource which caused start up errors in k8s 1.6 (thanks @Pothulapati!) * Added support for using trust anchors from an external certificate issuer (such as `cert-manager`) to the `linkerd-identity` service * Added support for headless services (thanks @JohannesEH!) * Helm * **Breaking change**: Renamed `noInitContainer` parameter to `cniEnabled` * **Breaking Change** Updated Helm charts to follow best practices (thanks @Pothulapati and @javaducky!) * Fixed an issue with `helm install` where the lists of ignored inbound and outbound ports would not be reflected * Fixed the `linkerd-cni` Helm chart not setting proper namespace annotations and labels * Fixed certificate issuance lifetime not being set when installing through Helm * Updated the helm build to retain previous releases * Moved CNI template into its own Helm chart * Proxy * Fixed an issue that could cause the OpenCensus exporter to stall * Improved error classification and error responses for gRPC services * Fixed a bug where the proxy could stop receiving service discovery updates, resulting in 503 errors * Improved debug/error logging to include detailed contextual information * Fixed a bug in the proxy's logging subsystem that could cause the proxy to consume memory until the process is OOM killed, especially when the proxy was configured to log diagnostic information * Updated proxy dependencies to address RUSTSEC-2019-0033, RUSTSEC-2019-0034, and RUSTSEC-2020-02 * Web UI * Fixed an error when refreshing an already open dashboard when the Linkerd version has changed * Increased the speed of the dashboard by pausing network activity when the dashboard is not visible to the user * Added support for CronJobs and ReplicaSets, including new Grafana dashboards for them * Added `linkerd check` to the dashboard in the `/controlplane` view * Added request and response headers to the `tap` expanded view in the dashboard * Added filter to namespace select button * Improved how empty tables are displayed * Added `Host:` header validation to the `linkerd-web` service, to protect against DNS rebinding attacks * Made the dashboard sidebar component responsive * Changed the navigation bar color to the one used on the [Linkerd](https://linkerd.io/) website * Internal * Added validation to incoming sidecar injection requests that ensures the value of `linkerd.io/inject` is either `enabled` or `disabled` (thanks @mayankshah1607) * Upgraded the Prometheus Go client library to v1.2.1 (thanks @daxmc99!) * Fixed an issue causing `tap`, `injector` and `sp-validator` to use old certificates after `helm upgrade` due to not being restarted * Fixed incomplete Swagger definition of the tap api, causing benign error logging in the kube-apiserver * Removed the destination container from the linkerd-controller deployment as it now runs in the linkerd-destination deployment * Allowed the control plane to be injected with the `debug` container * Updated proxy image build script to support HTTP proxy options (thanks @joakimr-axis!) * Updated the CLI `doc` command to auto-generate documentation for the proxy configuration annotations (thanks @StupidScience!) * Added new `--trace-collector` and `--trace-collector-svc-account` flags to `linkerd inject` that configures the OpenCensus trace collector used by proxies in the injected workload (thanks @Pothulapati!) * Added a new `--control-plane-tracing` flag to `linkerd install` that enables distributed tracing in the control plane (thanks @Pothulapati!) * Added distributed tracing support to the control plane (thanks @Pothulapati!) ## edge-20.2.1 This edge release is a release candidate for `stable-2.7` and fixes an issue where the proxy could consume inappropriate amounts of memory. * Proxy * Fixed a bug in the proxy's logging subsystem that could cause the proxy to consume memory until the process is OOM killed, especially when the proxy was configured to log diagnostic information * Fixed properly emitting `grpc-status` headers when signaling proxy errors to gRPC clients * Updated certain proxy dependencies to address RUSTSEC-2019-0033, RUSTSEC-2019-0034, and RUSTSEC-2020-02 ## edge-20.1.4 This edge release is a release candidate for `stable-2.7`. The `linkerd check` command has been updated to improve the control plane debugging experience. * CLI * Updated the mTLS trust anchor checks to eliminate false positives caused by extra trailing spaces * Reduced the severity level of the Linkerd version checks, so that they don't fail when the external version endpoint is unreachable (thanks @mayankshah1607!) * Added a new `tap` APIService check to aid with uncovering Kubernetes API aggregation layer issues (thanks @droidnoob!) ## edge-20.1.3 This edge release is a release candidate for `stable-2.7`. An update to the Helm charts has caused a **breaking change** for users who have installed Linkerd using Helm. In order to make the purpose of the `noInitContainer` parameter more explicit, it has been renamed to `cniEnabled`. * CLI * Introduced CNI checks to confirm the CNI plugin is installed and ready; this is done through `linkerd check --pre --linkerd-cni-enabled` before installation and `linkerd check` after installation if the CNI plugin is present * Added support for the `--as-group` flag so that users can impersonate groups for Kubernetes operations (thanks @mayankshah160!) * Controller * Fixed an issue where an override of the Docker registry was not being applied to debug containers (thanks @javaducky!) * Added check for the Subject Alternate Name attributes to the API server when access restrictions have been enabled (thanks @javaducky!) * Added support for arbitrary pod labels so that users can leverage the Linkerd provided Prometheus instance to scrape for their own labels (thanks @daxmc99!) * Fixed an issue with CNI config parsing * Helm * **Breaking change**: Renamed `noInitContainer` parameter to `cniEnabled` * Fixed an issue with `helm install` where the lists of ignored inbound and outbound ports would not be reflected ## edge-20.1.2 * CLI * Added HA specific checks to `linkerd check` to ensure that the `kube-system` namespace has the `config.linkerd.io/admission-webhooks:disabled` label set * Fixed a problem causing the presence of unnecessary empty fields in generated resource definitions (thanks @mayankshah1607) * Proxy * Fixed an issue that could cause the OpenCensus exporter to stall * Internal * Added validation to incoming sidecar injection requests that ensures the value of `linkerd.io/inject` is either `enabled` or `disabled` (thanks @mayankshah1607) ## edge-20.1.1 This edge release includes experimental improvements to the Linkerd proxy's request buffering and backpressure infrastructure. Additionally, we've fixed several bugs when installing Linkerd with Helm, updated the CLI to allow using both port numbers _and_ port ranges with the `--skip-inbound-ports` and `--skip-outbound-ports` flags, and fixed a dashboard error that can occur if the dashboard is open in a browser while updating Linkerd. **Note**: The `linkerd-proxy` version included with this release is more experimental than usual. We'd love your help testing, but be aware that there might be stability issues. * CLI * Added the ability to pass both port numbers and port ranges to `--skip-inbound-ports` and `--skip-outbound-ports` (thanks to @javaducky!) * Controller * Fixed a race condition in the `linkerd-web` service * Updated Prometheus to 2.15.2 (thanks @Pothulapati) * Web UI * Fixed an error when refreshing an already open dashboard when the Linkerd version has changed * Proxy * Internal changes to the proxy's request buffering and backpressure infrastructure * Helm * Fixed the `linkerd-cni` Helm chart not setting proper namespace annotations and labels * Fixed certificate issuance lifetime not being set when installing through Helm * More improvements to Helm best practices (thanks to @Pothulapati!) ## edge-19.12.3 This edge release adds support for pod IP and service cluster IP lookups, improves performance of the dashboard, and makes `linkerd check --pre` perform more comprehensive checks. The `--wait-before-exit-seconds` flag has been added to allow Linkerd users to opt in to `preStop hooks`. The details of this change are in [#3798](https://github.com/linkerd/linkerd2/pull/3798). Also, the proxy has been updated to `v2.82.0` which improves gRPC error classification and [ensures that resolutions](https://github.com/linkerd/linkerd2/pull/3848) are released when the associated balancer becomes idle. Finally, an update to follow best practices in the Helm charts has caused a *breaking change*. Users who have installed Linkerd using Helm must be certain to read the details of [#3822](https://github.com/linkerd/linkerd2/issues/3822) * CLI * Increased the comprehensiveness of `linkerd check --pre` * Added TLS certificate validation to `check` and `upgrade` commands * Controller * Increased minimum kubernetes version to 1.13.0 * Added support for pod ip and service cluster ip lookups in the destination service * Added recommended kubernetes labels to control-plane * Added the `--wait-before-exit-seconds` flag to linkerd inject for the proxy sidecar to delay the start of its shutdown process (a huge commit from @KIVagant, thanks!) * Added a pre-sign check to the identity service * Web UI * Increased the speed of the dashboard by pausing network activity when the dashboard is not visible to the user * Proxy * Added a timeout to release resolutions to idle balancers * Improved error classification for gRPC services * Internal * **Breaking Change** Updated Helm charts to follow best practices using proper casing (thanks @Pothulapati!) ## edge-19.12.2 * CLI * Added support for injecting CronJobs and ReplicaSets, as well as the ability to use them as targets in the CLI subcommands * Introduced the new flags `--identity-issuer-certificate-file`, `--identity-issuer-key-file` and `identity-trust-anchors-file` to `linkerd upgrade` to support trust anchor and issuer certificate rotation * Controller * Fixed inject failures for pods with security context capabilities * Web UI * Added support for CronJobs and ReplicaSets, including new Grafana dashboards for them * Proxy * Fixed a bug where the proxy could stop receiving service discovery updates, resulting in 503 errors * Internal * Moved CNI template into a Helm chart to prepare for future publication * Upgraded the Prometheus Go client library to v1.2.1 (thanks @daxmc99!) * Reenabled certificates rotation integration tests ## edge-19.12.1 * CLI * Added condition to the `linkerd stat` command that requires a window size of at least 15 seconds to work properly with Prometheus * Internal * Fixed whitespace path handling in non-docker build scripts (thanks @joakimr-axis!) * Removed Calico logutils dependency that was incompatible with Go 1.13 * Updated Helm templates to use fully-qualified variable references based upon Helm best practices (thanks @javaducky!) ## edge-19.11.3 * CLI * Added a check that ensures using `--namespace` and `--all-namespaces` results in an error as they are mutually exclusive * Internal * Fixed an issue causing `tap`, `injector` and `sp-validator` to use old certificates after `helm upgrade` due to not being restarted * Fixed incomplete Swagger definition of the tap api, causing benign error logging in the kube-apiserver ## edge-19.11.2 * CLI * Added a `Dashboard.Replicas` parameter to the Linkerd Helm chart to allow configuring the number of dashboard replicas (thanks @KIVagant!) * Removed redundant service profile check (thanks @alenkacz!) * Web UI * Added `linkerd check` to the dashboard in the `/controlplane` view * Added request and response headers to the `tap` expanded view in the dashboard * Internal * Removed the destination container from the linkerd-controller deployment as it now runs in the linkerd-destination deployment * Upgraded Go to version 1.13.4 ## edge-19.11.1 * CLI * Updated `uninject` command to work with namespace resources (thanks @mayankshah1607!) * Controller * Added `conntrack` to the `debug` container to help with connection tracking debugging * Fixed a bug in `tap` where mismatch cluster domain and trust domain caused `tap` to hang * Fixed an issue in the `identity` RBAC resource which caused start up errors in k8s 1.6 (thanks @Pothulapati!) * Proxy * Improved debug/error logging to include detailed contextual information * Web UI * Added filter to namespace select button * Improved how empty tables are displayed * Internal * Added integration test for custom cluster domain * Allowed the control plane to be injected with the `debug` container * Updated proxy image build script to support HTTP proxy options (thanks @joakimr-axis!) * Updated the CLI `doc` command to auto-generate documentation for the proxy configuration annotations (thanks @StupidScience!) ## edge-19.10.5 This edge release adds support for integrating Linkerd's PKI with an external certificate issuer such as [`cert-manager`], adds distributed tracing support to the Linkerd control plane, and adds protection against DNS rebinding attacks to the web dashboard. In addition, it includes several improvements to the Linkerd CLI. * CLI * Added a new `--identity-external-issuer` flag to `linkerd install` that configures Linkerd to use certificates issued by an external certificate issuer (such as `cert-manager`) * Added support for injecting a namespace to `linkerd inject` (thanks @mayankshah1607!) * Added checks to `linkerd check --preinstall` ensuring Kubernetes Secrets can be created and accessed * Fixed `linkerd tap` sometimes displaying incorrect pod names for unmeshed IPs that match multiple running pods * Controller * Added support for using trust anchors from an external certificate issuer (such as `cert-manager`) to the `linkerd-identity` service * Web UI * Added `Host:` header validation to the `linkerd-web` service, to protect against DNS rebinding attacks * Internal * Added new `--trace-collector` and `--trace-collector-svc-account` flags to `linkerd inject` that configures the OpenCensus trace collector used by proxies in the injected workload (thanks @Pothulapati!) * Added a new `--control-plane-tracing` flag to `linkerd install` that enables distributed tracing in the control plane (thanks @Pothulapati!) * Added distributed tracing support to the control plane (thanks @Pothulapati!) Also, thanks to @joakimr-axis for several fixes and improvements to internal build scripts! [`cert-manager`]: https://github.com/jetstack/cert-manager ## edge-19.10.4 This edge release adds dashboard UX enhancements, and improves the speed of the CLI. * CLI * Made `linkerd install --ignore-cluster` and `--skip-checks` faster * Fixed a bug causing `linkerd upgrade` to fail when used with `--from-manifest` * Web UI * Made the dashboard sidebar component responsive * Changed the navigation bar color to the one used on the [Linkerd](https://linkerd.io/) website ## edge-19.10.3 This edge release adds support for headless services, improves the upgrade process after installing Linkerd with a custom cluster domain, and enhances the `check` functionality to report invalid trust anchors. * CLI * Made `--cluster-domain` an install-only flag (thanks @bmcstdio!) * Updated `check` to ensure that proxy trust anchors match configuration (thanks @ereslibre!) * Controller * Added support for headless services (thanks @JohannesEH!) * Helm * Updated the helm build to retain previous releases ## stable-2.6.0 This release introduces distributed tracing support, adds request and response headers to `linkerd tap`, dramatically improves the performance of the dashboard on large clusters, adds traffic split visualizations to the dashboard, adds a public Helm repo, and many more improvements! For more details, see the announcement blog post: To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: Please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-6-0). **Special thanks to**: @alenkacz, @arminbuerkle, @bmcstdio, @bourquep, @brianstorti, @kevtaylor, @KIVagant, @pierDipi, and @Pothulapati! **Full release notes**: * CLI * Added a new `json` output option to the `linkerd tap` command, which exposes request and response headers * Added a public Helm repo - for full installation instructions, see our [Helm documentation](https://linkerd.io/2/tasks/install-helm/). * Added an `--address` flag to `linkerd dashboard`, allowing users to specify a port-forwarding address (thanks @bmcstdio!) * Added node selector constraints to Helm installation, so users can control which nodes the control plane is deployed to (thanks @bmcstdio!) * Added a `--cluster-domain` flag to the `linkerd install` command that allows setting a custom cluster domain (thanks @arminbuerkle!) * Added a `--disable-heartbeat` flag for `linkerd install | upgrade` commands * Allowed disabling namespace creation when installing Linkerd using Helm (thanks @KIVagant!) * Improved the error message when the CLI cannot connect to Kubernetes (thanks @alenkacz!) * Controller * Updated the Prometheus config to keep only needed `cadvisor` metrics, substantially reducing the number of time-series stored in most clusters * Introduced `config.linkerd.io/trace-collector` and `config.alpha.linkerd.io/trace-collector-service-account` pod spec annotations to support per-pod tracing * Instrumented the proxy injector to provide additional metrics about injection (thanks @Pothulapati!) * Added Kubernetes events (and log lines) when the proxy injector injects a deployment, and when injection is skipped * Fixed a workload admission error between the Kubernetes apiserver and the HA proxy injector, by allowing workloads in a namespace to be omitted from the admission webhooks phase using the `config.linkerd.io/admission-webhooks: disabled` label (thanks @hasheddan!) * Fixed proxy injector timeout during a large number of concurrent injections * Added support for disabling the heartbeat cronjob (thanks @kevtaylor!) * Proxy * Added distributed tracing support * Decreased proxy Docker image size by removing bundled debug tools * Added 587 (SMTP) to the list of ports to ignore in protocol detection (bound to server-speaks-first protocols) (thanks @brianstorti!) * Web UI * Redesigned dashboard navigation so workloads are now viewed by namespace, with an "All Namespaces" option, in order to increase dashboard speed * Added Traffic Splits as a resource to the dashboard, including a Traffic Split detail page * Added a `Linkerd Namespace` Grafana dashboard, allowing users to view historical data for a given namespace, similar to CLI output for `linkerd stat deploy -n myNs` (thanks @bourquep!) * Fixed bad request in the top routes tab on empty fields (thanks @pierDipi!) * Internal * Moved CI from Travis to GitHub Actions * Added requirement for Go `1.12.9` for controller builds to include security fixes * Added support for Kubernetes `1.16` * Upgraded client-go to `v12.0.0` ## edge-19.10.2 This edge release is a release candidate for `stable-2.6`. * Controller * Added the destination container back to the controller; it had previously been separated into its own deployment. This ensures backwards compatibility and allows users to avoid data plane downtime during an upcoming upgrade to `stable-2.6`. ## edge-19.10.1 This edge release is a release candidate for `stable-2.6`. * Proxy * Improved error logging when the proxy fails to emit trace spans * Fixed bug in distributed tracing where trace ids with fewer than 16 bytes were discarded * Internal * Added integration tests for `linkerd edges` and `linkerd endpoints` ## edge-19.9.5 This edge release is a release candidate for `stable-2.6`. * Helm * Added node selector constraints, so users can control which nodes the control plane is deployed to (thanks @bmcstdio!) * CLI * Added request and response headers to the JSON output option for `linkerd tap` ## edge-19.9.4 This edge release introduces experimental support for distributed tracing as well as a redesigned sidebar in the Web UI! Experimental support for distributed tracing means that Linkerd data plane proxies can now emit trace spans, allowing you to see the exact amount of time spent in the Linkerd proxy for traced requests. The new `config.linkerd.io/trace-collector` and `config.alpha.linkerd.io/trace-collector-service-account` tracing annotations allow specifying which pods should emit trace spans. The goal of the dashboard's sidebar redesign was to reduce load on Prometheus and simplify navigation by providing top-level views centered around namespaces and workloads. * CLI * Introduced a new `--cluster-domain` flag to the `linkerd install` command that allows setting a custom cluster domain (thanks @arminbuerkle!) * Fixed the `linkerd endpoints` command to use the correct Destination API address (thanks @Pothulapati!) * Added `--disable-heartbeat` flag for `linkerd` `install|upgrade` commands * Controller * Instrumented the proxy-injector to provide additional metrics about injection (thanks @Pothulapati!) * Added support for `config.linkerd.io/admission-webhooks: disabled` label on namespaces so that the pods creation events in these namespaces are ignored by the proxy injector; this fixes situations in HA deployments where the proxy-injector is installed in `kube-system` (thanks @hasheddan!) * Introduced `config.linkerd.io/trace-collector` and `config.alpha.linkerd.io/trace-collector-service-account` pod spec annotations to support per-pod tracing * Web UI * Workloads are now viewed by namespace, with an "All Namespaces" option, to improve dashboard performance * Proxy * Added experimental distributed tracing support ## edge-19.9.3 * Helm * Allowed disabling namespace creation during install (thanks @KIVagant!) * CLI * Added a new `json` output option to the `linkerd tap` command * Controller * Fixed proxy injector timeout during a large number of concurrent injections * Separated the destination controller into its own separate deployment * Updated Prometheus config to keep only needed `cadvisor` metrics, substantially reducing the number of time-series stored in most clusters * Web UI * Fixed bad request in the top routes tab on empty fields (thanks @pierDipi!) * Proxy * Fixes to the client's backoff logic * Added 587 (SMTP) to the list of ports to ignore in protocol detection (bound to server-speaks-first protocols) (thanks @brianstorti!) ## edge-19.9.2 Much of our effort has been focused on improving our build and test infrastructure, but this edge release lays the groundwork for some big new features to land in the coming releases! * Helm * There's now a public Helm repo! This release can be installed with: `helm repo add linkerd-edge https://helm.linkerd.io/edge && helm install linkerd-edge/linkerd2` * Improved TLS credential parsing by ignoring spurious newlines * Proxy * Decreased proxy-init Docker image size by removing bundled debug tools * Web UI * Fixed an issue where the edges table could end up with duplicates * Added an icon to more clearly label external links * Internal * Upgraded client-go to v12.0.0 * Moved CI from Travis to GitHub Actions ## edge-19.9.1 This edge release adds traffic splits into the Linkerd dashboard as well as a variety of other improvements. * CLI * Improved the error message when the CLI cannot connect to Kubernetes (thanks @alenkacz!) * Added `--address` flag to `linkerd dashboard` (thanks @bmcstdio!) * Controller * Fixed an issue where the proxy-injector had insufficient RBAC permissions * Added support for disabling the heartbeat cronjob (thanks @kevtaylor!) * Proxy * Decreased proxy Docker image size by removing bundled debug tools * Fixed an issue where the incorrect content-length could be set for GET requests with bodies * Web UI * Added trafficsplits as a resource to the dashboard, including a trafficsplit detail page * Internal * Added support for Kubernetes 1.16 ## edge-19.8.7 * Controller * Added Kubernetes events (and log lines) when the proxy injector injects a deployment, and when injection is skipped * Additional preparation for configuring the cluster base domain (thanks @arminbuerkle!) * Proxy * Changed the proxy to require the `LINKERD2_PROXY_DESTINATION_SVC_ADDR` environment variable when starting up * Web UI * Increased dashboard speed by consolidating existing Prometheus queries ## edge-19.8.6 A new Grafana dashboard has been added which shows historical data for a selected namespace. The build process for controller components now requires `Go 1.12.9`. Additional contributions were made towards support for custom cluster domains. * Web UI * Added a `Linkerd Namespace` Grafana dashboard, allowing users to view historical data for a given namespace, similar to CLI output for `linkerd stat deploy -n myNs` (thanks @bourquep!) * Internal * Added requirement for Go `1.12.9` for controller builds to include security fixes * Set `LINKERD2_PROXY_DESTINATION_GET_SUFFIXES` proxy environment variable, in preparation for custom cluster domain support (thanks @arminbuerkle!) ## stable-2.5.0 This release adds [Helm support](https://linkerd.io/2/tasks/install-helm/), [tap authentication and authorization via RBAC](https://linkerd.io/tap-rbac), traffic split stats, dynamic logging levels, a new cluster monitoring dashboard, and countless performance enhancements and bug fixes. For more details, see the announcement blog post: To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: Use the `linkerd upgrade` command to upgrade the control plane. This command ensures that all existing control plane's configuration and mTLS secrets are retained. For more details, please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-5-0). **Special thanks to**: @alenkacz, @codeman9, @ethan-daocloud, @jonathanbeber, and @Pothulapati! **Full release notes**: * CLI * **New** Updated `linkerd tap`, `linkerd top` and `linkerd profile --tap` to require `tap.linkerd.io` RBAC privileges. See for more info * **New** Added traffic split metrics via `linkerd stat trafficsplits` subcommand * Made the `linkerd routes` command traffic split aware * Introduced the `linkerd --as` flag which allows users to impersonate another user for Kubernetes operations * Introduced the `--all-namespaces` (`-A`) option to the `linkerd get`, `linkerd edges` and `linkerd stat` commands to retrieve resources across all namespaces * Improved the installation report produced by the `linkerd check` command to include the control plane pods' live status * Fixed bug in the `linkerd upgrade config` command that was causing it to crash * Introduced `--use-wait-flag` to the `linkerd install-cni` command, to configure the CNI plugin to use the `-w` flag for `iptables` commands * Introduced `--restrict-dashboard-privileges` flag to `linkerd install` command, to disallow tap in the dashboard * Fixed `linkerd uninject` not removing `linkerd.io/inject: enabled` annotations * Fixed `linkerd stat -h` example commands (thanks @ethan-daocloud!) * Fixed incorrect "meshed" count in `linkerd stat` when resources share the same label selector for pods (thanks @jonathanbeber!) * Added pod status to the output of the `linkerd stat` command (thanks @jonathanbeber!) * Added namespace information to the `linkerd edges` command output and a new `-o wide` flag that shows the identity of the client and server if known * Added a check to the `linkerd check` command to validate the user has privileges necessary to create CronJobs * Added a new check to the `linkerd check --pre` command validating that if PSP is enabled, the NET_RAW capability is available * Controller * **New** Disabled all unauthenticated tap endpoints. Tap requests now require [RBAC authentication and authorization](https://linkerd.io/tap-rbac) * The `l5d-require-id` header is now set on tap requests so that a connection is established over TLS * Introduced a new RoleBinding in the `kube-system` namespace to provide [access to tap](https://linkerd.io/tap-rbac) * Added HTTP security headers on all dashboard responses * Added support for namespace-level proxy override annotations (thanks @Pothulapati!) * Added resource limits when HA is enabled (thanks @Pothulapati!) * Added pod anti-affinity rules to the control plane pods when HA is enabled (thanks @Pothulapati!) * Fixed a crash in the destination service when an endpoint does not have a `TargetRef` * Updated the destination service to return `InvalidArgument` for external name services so that the proxy does not immediately fail the request * Fixed an issue with discovering StatefulSet pods via their unique hostname * Fixed an issue with traffic split where outbound proxy stats are missing * Upgraded the service profile CRD to v1alpha2. No changes required for users currently using v1alpha1 * Updated the control plane's pod security policy to restrict workloads from running as `root` in the CNI mode (thanks @codeman9!) * Introduced optional cluster heartbeat cron job * Bumped Prometheus to 2.11.1 * Bumped Grafana to 6.2.5 * Proxy * **New** Added a new `/proxy-log-level` endpoint to update the log level at runtime * **New** Updated the tap server to only admit requests from the control plane's tap controller * Added `request_handle_us` histogram to measure proxy overhead * Fixed gRPC client cancellations getting recorded as failures rather than as successful * Fixed a bug where tap would stop streaming after a short amount of time * Fixed a bug that could cause the proxy to leak service discovery resolutions to the Destination controller * Web UI * **New** Added "Kubernetes cluster monitoring" Grafana dashboard with cluster and containers metrics * Updated the web server to use the new tap APIService. If the `linkerd-web` service account is not authorized to tap resources, users will see a link to documentation to remedy the error ## edge-19.8.5 This edge release is a release candidate for `stable-2.5`. * CLI * Fixed CLI filepath issue on Windows * Proxy * Fixed gRPC client cancellations getting recorded as failures rather than as successful ## edge-19.8.4 This edge release is a release candidate for `stable-2.5`. * CLI * Introduced `--use-wait-flag` to the `linkerd install-cni` command, to configure the CNI plugin to use the `-w` flag for `iptables` commands * Controller * Disabled the tap gRPC server listener. All tap requests now require RBAC authentication and authorization ## edge-19.8.3 This edge release introduces a new `linkerd stat trafficsplits` subcommand, to show traffic split metrics. It also introduces a "Kubernetes cluster monitoring" Grafana dashboard. * CLI * Added traffic split metrics via `linkerd stat trafficsplits` subcommand * Fixed `linkerd uninject` not removing `linkerd.io/inject: enabled` annotations * Fixed `linkerd stat -h` example commands (thanks @ethan-daocloud!) * Controller * Added support for namespace-level proxy override annotations * Removed unauthenticated tap from the Public API * Proxy * Added `request_handle_us` histogram to measure proxy overhead * Updated the tap server to only admit requests from the control plane's tap controller * Fixed a bug where tap would stop streaming after a short amount of time * Fixed a bug that could cause the proxy to leak service discovery resolutions to the Destination controller * Web UI * Added "Kubernetes cluster monitoring" Grafana dashboard with cluster and containers metrics * Internal * Updated `linkerd install` and `linkerd upgrade` to use Helm charts for templating * Pinned Helm tooling to `v2.14.3` * Added Helm integration tests * Added container CPU and memory usage to `linkerd-heartbeat` requests * Removed unused inject code (thanks @alenkacz!) ## edge-19.8.2 This edge release introduces the new Linkerd control plane Helm chart, named `linkerd2`. Helm users can now install and remove the Linkerd control plane by using the `helm install` and `helm delete` commands. Proxy injection also now uses Helm charts. No changes were made to the existing `linkerd install` behavior. For detailed installation steps using Helm, see the notes for [#3146](https://github.com/linkerd/linkerd2/pull/3146). * CLI * Updated `linkerd top` and `linkerd profile --tap` to require `tap.linkerd.io` RBAC privileges, see for more info * Modified `tap.linkerd.io` APIService to enable usage in `kubectl auth can-i` commands * Introduced `--restrict-dashboard-privileges` flag to `linkerd install` command, to restrict the dashboard's default privileges to disallow tap * Controller * Introduced a new ClusterRole, `linkerd-linkerd-tap-admin`, which gives cluster-wide tap privileges. Also introduced a new ClusterRoleBinding, `linkerd-linkerd-web-admin`, which binds the `linkerd-web` service account to the new tap ClusterRole * Removed successfully completed `linkerd-heartbeat` jobs from pod listing in the linkerd control plane to streamline `get po` output (thanks @Pothulapati!) * Web UI * Updated the web server to use the new tap APIService. If the `linkerd-web` service account is not authorized to tap resources, users will see a link to documentation to remedy the error ## edge-19.8.1 ### Significant Update This edge release introduces a new tap APIService. The Kubernetes apiserver authenticates the requesting tap user and then forwards tap requests to the new tap APIServer. The `linkerd tap` command now makes requests against the APIService. With this release, users must be authorized via RBAC to use the `linkerd tap` command. Specifically `linkerd tap` requires the `watch` verb on all resources in the `tap.linkerd.io/v1alpha1` APIGroup. More granular access is also available via sub-resources such as `deployments/tap` and `pods/tap`. * CLI * Added a check to the `linkerd check` command to validate the user has privileges necessary to create CronJobs * Introduced the `linkerd --as` flag which allows users to impersonate another user for Kubernetes operations * The `linkerd tap` command now makes requests against the tap APIService * Controller * Added HTTP security headers on all dashboard responses * Fixed nil pointer dereference in the destination service when an endpoint does not have a `TargetRef` * Added resource limits when HA is enabled * Added RSA support to TLS libraries * Updated the destination service to return `InvalidArgument` for external name services so that the proxy does not immediately fail the request * The `l5d-require-id` header is now set on tap requests so that a connection is established over TLS * Introduced the `APIService/v1alpha1.tap.linkerd.io` global resource * Introduced the `ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator` global resource * Introduced the `Secret/linkerd-tap-tls` resource into the `linkerd` namespace * Introduced the `RoleBinding/linkerd-linkerd-tap-auth-reader` resource into the `kube-system` namespace * Proxy * Added the `LINKERD2_PROXY_TAP_SVC_NAME` environment variable so that the tap server attempts to authorize client identities * Internal * Replaced `dep` with Go modules for dependency management ## edge-19.7.5 * CLI * Improved the installation report produced by the `linkerd check` command to include the control plane pods' live status * Added the `--all-namespaces` (`-A`) option to the `linkerd get`, `linkerd edges` and `linkerd stat` commands to retrieve resources across all namespaces * Controller * Fixed an issue with discovering StatefulSet pods via their unique hostname * Fixed an issue with traffic split where outbound proxy stats are missing * Bumped Prometheus to 2.11.1 * Bumped Grafana to 6.2.5 * Upgraded the service profile CRD to v1alpha2 where the openAPIV3Schema validation is replaced by a validating admission webhook. No changes required for users currently using v1alpha1 * Updated the control plane's pod security policy to restrict workloads from running as `root` in the CNI mode (thanks @codeman9!) * Introduced cluster heartbeat cron job * Proxy * Introduced the `l5d-require-id` header to enforce TLS outbound communication from the Tap server ## edge-19.7.4 * CLI * Made the `linkerd routes` command traffic-split aware * Fixed bug in the `linkerd upgrade config` command that was causing it to crash * Added pod status to the output of the `linkerd stat`command (thanks @jonathanbeber!) * Fixed incorrect "meshed" count in `linkerd stat` when resources share the same label selector for pods (thanks @jonathanbeber!) * Added namespace information to the `linkerd edges` command output and a new `-o wide` flag that shows the identity of the client and server if known * Added a new check to the `linkerd check --pre` command validating that if PSP is enabled, the NET_RAW capability is available * Controller * Added pod anti-affinity rules to the control plane pods when HA is enabled (thanks @Pothulapati!) * Proxy * Improved performance by using a constant-time load balancer * Added a new `/proxy-log-level` endpoint to update the log level at runtime ## stable-2.4.0 This release adds traffic splitting functionality, support for the Kubernetes Service Mesh Interface (SMI), graduates high-availability support out of experimental status, and adds a tremendous list of other improvements, performance enhancements, and bug fixes. Linkerd's new traffic splitting feature allows users to dynamically control the percentage of traffic destined for a service. This powerful feature can be used to implement rollout strategies like canary releases and blue-green deploys. Support for the [Service Mesh Interface](https://smi-spec.io) (SMI) makes it easier for ecosystem tools to work across all service mesh implementations. Along with the introduction of optional install stages via the `linkerd install config` and `linkerd install control-plane` commands, the default behavior of the `linkerd inject` command only adds annotations and defers injection to the always-installed proxy injector component. Finally, there have been many performance and usability improvements to the proxy and UI, as well as production-ready features including: * A new `linkerd edges` command that provides fine-grained observability into the TLS-based identity system * A `--enable-debug-sidecar` flag for the `linkerd inject` command that improves debugging efforts Linkerd recently passed a CNCF-sponsored security audit! Check out the in-depth report [here](https://github.com/linkerd/linkerd2/blob/master/SECURITY_AUDIT.pdf). To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: Use the `linkerd upgrade` command to upgrade the control plane. This command ensures that all existing control plane's configuration and mTLS secrets are retained. For more details, please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-4-0) for more details. **Special thanks to**: @alenkacz, @codeman9, @dwj300, @jackprice, @liquidslr, @matej-g, @Pothulapati, @zaharidichev **Full release notes**: * CLI * **Breaking Change** Removed the `--proxy-auto-inject` flag, as the proxy injector is now always installed * **Breaking Change** Replaced the `--linkerd-version` flag with the `--proxy-version` flag in the `linkerd install` and `linkerd upgrade` commands, which allows setting the version for the injected proxy sidecar image, without changing the image versions for the control plane * Introduced install stages: `linkerd install config` and `linkerd install control-plane` * Introduced upgrade stages: `linkerd upgrade config` and `linkerd upgrade control-plane` * Introduced a new `--from-manifests` flag to `linkerd upgrade` allowing manually feeding a previously saved output of `linkerd install` into the command, instead of requiring a connection to the cluster to fetch the config * Introduced a new `--manual` flag to `linkerd inject` to output the proxy sidecar container spec * Introduced a new `--enable-debug-sidecar` flag to `linkerd inject`, that injects a debug sidecar to inspect traffic to and from the meshed pod * Added a new check for unschedulable pods and PSP issues (thanks, @liquidslr!) * Disabled the spinner in `linkerd check` when running without a TTY * Ensured the ServiceAccount for the proxy injector is created before its Deployment to avoid warnings when installing the proxy injector (thanks, @dwj300!) * Added a `linkerd check config` command for verifying that `linkerd install config` was successful * Improved the help documentation of `linkerd install` to clarify flag usage * Added support for private Kubernetes clusters by changing the CLI to connect to the control plane using a port-forward (thanks, @jackprice!) * Fixed `linkerd check` and `linkerd dashboard` failing when any control plane pod is not ready, even when multiple replicas exist (as in HA mode) * **New** Added a `linkerd edges` command that shows the source and destination name and identity for proxied connections, to assist in debugging * Tap can now be disabled for specific pods during injection by using the `--disable-tap` flag, or by using the `config.linkerd.io/disable-tap` annotation * Introduced pre-install healthcheck for clock skew (thanks, @matej-g!) * Added a JSON option to the `linkerd edges` command so that output is scripting friendly and can be parsed easily (thanks @alenkacz!) * Fixed an issue when Linkerd is installed with `--ha`, running `linkerd upgrade` without `--ha` will disable the high availability control plane * Fixed an issue with `linkerd upgrade` where running without `--ha` would unintentionally disable high availability features if they were previously enabled * Added a `--init-image-version` flag to `linkerd inject` to override the injected proxy-init container version * Added the `--linkerd-cni-enabled` flag to the `install` subcommands so that `NET_ADMIN` capability is omitted from the CNI-enabled control plane's PSP * Updated `linkerd check` to validate the caller can create `PodSecurityPolicy` resources * Added a check to `linkerd install` to prevent installing multiple control planes into different namespaces avoid conflicts between global resources * Added support for passing a URL directly to `linkerd inject` (thanks @Pothulapati!) * Added more descriptive output to the `linkerd check` output for control plane ReplicaSet readiness * Refactored the `linkerd endpoints` to use the same interface as used by the proxy for service discovery information * Fixed a bug where `linkerd inject` would fail when given a path to a file outside the current directory * Graduated high-availability support out of experimental status * Modified the error message for `linkerd install` to provide instructions for proceeding when an existing installation is found * Controller * Added Go pprof HTTP endpoints to all control plane components' admin servers to better assist debugging efforts * Fixed bug in the proxy injector, where sporadically the pod workload owner wasn't properly determined, which would result in erroneous stats * Added support for a new `config.linkerd.io/disable-identity` annotation to opt out of identity for a specific pod * Fixed pod creation failure when a `ResourceQuota` exists by adding a default resource spec for the proxy-init init container * Fixed control plane components failing on startup when the Kubernetes API returns an `ErrGroupDiscoveryFailed` * Added Controller Component Labels to the webhook config resources (thanks, @Pothulapati!) * Moved the tap service into its own pod * **New** Control plane installations now generate a self-signed certificate and private key pair for each webhook, to prepare for future work to make the proxy injector and service profile validator HA * Added the `config.linkerd.io/enable-debug-sidecar` annotation allowing the `--enable-debug-sidecar` flag to work when auto-injecting Linkerd proxies * Added multiple replicas for the `proxy-injector` and `sp-validator` controllers when run in high availability mode (thanks to @Pothulapati!) * Defined least privilege default security context values for the proxy container so that auto-injection does not fail (thanks @codeman9!) * Default the webhook failure policy to `Fail` in order to account for unexpected errors during auto-inject; this ensures uninjected applications are not deployed * Introduced control plane's PSP and RBAC resources into Helm templates; these policies are only in effect if the PSP admission controller is enabled * Removed `UPDATE` operation from proxy-injector webhook because pod mutations are disallowed during update operations * Default the mutating and validating webhook configurations `sideEffects` property to `None` to indicate that the webhooks have no side effects on other resources (thanks @Pothulapati!) * Added support for the SMI TrafficSplit API which allows users to define traffic splits in TrafficSplit custom resources * Added the `linkerd.io/control-plane-ns` label to all Linkerd resources allowing them to be identified using a label selector * Added Prometheus metrics for the Kubernetes watchers in the destination service for better visibility * Proxy * Replaced the fixed reconnect backoff with an exponential one (thanks, @zaharidichev!) * Fixed an issue where load balancers can become stuck * Added a dispatch timeout that limits the amount of time a request can be buffered in the proxy * Removed the limit on the number of concurrently active service discovery queries to the destination service * Fix an epoll notification issue that could cause excessive CPU usage * Added the ability to disable tap by setting an env var (thanks, @zaharidichev!) * Changed the proxy's routing behavior so that, when the control plane does not resolve a destination, the proxy forwards the request with minimal additional routing logic * Fixed a bug in the proxy's HPACK codec that could cause requests with very large header values to hang indefinitely * Fixed a memory leak that can occur if an HTTP/2 request with a payload ends before the entire payload is sent to the destination * The `l5d-override-dst` header is now used for inbound service profile discovery * Added errors totals to `response_total` metrics * Changed the load balancer to require that Kubernetes services are resolved via the control plane * Added the `NET_RAW` capability to the proxy-init container to be compatible with `PodSecurityPolicy`s that use `drop: all` * Fixed the proxy rejecting HTTP2 requests that don't have an `:authority` * Improved idle service eviction to reduce resource consumption for clients that send requests to many services * Fixed proxied HTTP/2 connections returning 502 errors when the upstream connection is reset, rather than propagating the reset to the client * Changed the proxy to treat unexpected HTTP/2 frames as stream errors rather than connection errors * Fixed a bug where DNS queries could persist longer than necessary * Improved router eviction to remove idle services in a more timely manner * Fixed a bug where the proxy would fail to process requests with obscure characters in the URI * Web UI * Added the Font Awesome stylesheet locally; this allows both Font Awesome and Material-UI sidebar icons to display consistently with no/limited internet access (thanks again, @liquidslr!) * Removed the Authorities table and sidebar link from the dashboard to prepare for a new, improved dashboard view communicating authority data * Fixed dashboard behavior that caused incorrect table sorting * Removed the "Debug" page from the Linkerd dashboard while the functionality of that page is being redesigned * Added an Edges table to the resource detail view that shows the source, destination name, and identity for proxied connections * Improved UI for Edges table in dashboard by changing column names, adding a "Secured" icon and showing an empty Edges table in the case of no returned edges * Internal * Known container errors were hidden in the integration tests; now they are reported in the output without having the tests fail * Fixed integration tests by adding known proxy-injector log warning to tests * Modified the integration test for `linkerd upgrade` in order to test upgrading from the latest stable release instead of the latest edge and reflect the typical use case * Moved the proxy-init container to a separate `linkerd/proxy-init` Git repository ## edge-19.7.3 * CLI * Graduated high-availability support out of experimental status * Modified the error message for `linkerd install` to provide instructions for proceeding when an existing installation is found * Controller * Added Prometheus metrics for the Kubernetes watchers in the destination service for better visibility ## edge-19.7.2 * CLI * Refactored the `linkerd endpoints` to use the same interface as used by the proxy for service discovery information * Fixed a bug where `linkerd inject` would fail when given a path to a file outside the current directory * Proxy * Fixed a bug where DNS queries could persist longer than necessary * Improved router eviction to remove idle services in a more timely manner * Fixed a bug where the proxy would fail to process requests with obscure characters in the URI ## edge-19.7.1 * CLI * Added more descriptive output to the `linkerd check` output for control plane ReplicaSet readiness * **Breaking change** Renamed `config.linkerd.io/debug` annotation to `config.linkerd.io/enable-debug-sidecar`, to match the `--enable-debug-sidecar` CLI flag that sets it * Fixed a bug in `linkerd edges` that caused incorrect identities to be displayed when requests were sent from two or more namespaces * Controller * Added the `linkerd.io/control-plane-ns` label to the SMI Traffic Split CRD * Proxy * Fixed proxied HTTP/2 connections returning 502 errors when the upstream connection is reset, rather than propagating the reset to the client * Changed the proxy to treat unexpected HTTP/2 frames as stream errors rather than connection errors ## edge-19.6.4 This release adds support for the SMI [Traffic Split](https://github.com/deislabs/smi-spec/blob/master/traffic-split.md) API. Creating a TrafficSplit resource will cause Linkerd to split traffic between the specified backend services. Please see [the spec](https://github.com/deislabs/smi-spec/blob/master/traffic-split.md) for more details. * CLI * Added a check to `install` to prevent installing multiple control planes into different namespaces * Added support for passing a URL directly to `linkerd inject` (thanks @Pothulapati!) * Added the `--all-namespaces` flag to `linkerd edges` * Controller * Added support for the SMI TrafficSplit API which allows users to define traffic splits in TrafficSplit custom resources * Web UI * Improved UI for Edges table in dashboard by changing column names, adding a "Secured" icon and showing an empty Edges table in the case of no returned edges ## edge-19.6.3 * CLI * Updated `linkerd check` to validate the caller can create `PodSecurityPolicy` resources * Controller * Default the mutating and validating webhook configurations `sideEffects` property to `None` to indicate that the webhooks have no side effects on other resources (thanks @Pothulapati!) * Proxy * Added the `NET_RAW` capability to the proxy-init container to be compatible with `PodSecurityPolicy`s that use `drop: all` * Fixed the proxy rejecting HTTP2 requests that don't have an `:authority` * Improved idle service eviction to reduce resource consumption for clients that send requests to many services * Web UI * Removed the "Debug" page from the Linkerd dashboard while the functionality of that page is being redesigned * Added an Edges table to the resource detail view that shows the source, destination name, and identity for proxied connections ## edge-19.6.2 * CLI * Added the `--linkerd-cni-enabled` flag to the `install` subcommands so that `NET_ADMIN` capability is omitted from the CNI-enabled control plane's PSP * Controller * Default to least-privilege security context values for the proxy container so that auto-inject does not fail on restricted PSPs (thanks @codeman9!) * Defined least privilege default security context values for the proxy container so that auto-injection does not fail on (thanks @codeman9!) * Default the webhook failure policy to `Fail` in order to account for unexpected errors during auto-inject; this ensures uninjected applications are not deployed * Introduced control plane's PSP and RBAC resources into Helm templates; these policies are only in effect if the PSP admission controller is enabled * Removed `UPDATE` operation from proxy-injector webhook because pod mutations are disallowed during update operations * Proxy * The `l5d-override-dst` header is now used for inbound service profile discovery * Include errors in `response_total` metrics * Changed the load balancer to require that Kubernetes services are resolved via the control plane * Web UI * Fixed dashboard behavior that caused incorrect table sorting ## edge-19.6.1 * CLI * Fixed an issue where, when Linkerd is installed with `--ha`, running `linkerd upgrade` without `--ha` will disable the high availability control plane * Added a `--init-image-version` flag to `linkerd inject` to override the injected proxy-init container version * Controller * Added multiple replicas for the `proxy-injector` and `sp-validator` controllers when run in high availability mode (thanks to @Pothulapati!) * Proxy * Fixed a memory leak that can occur if an HTTP/2 request with a payload ends before the entire payload is sent to the destination * Internal * Moved the proxy-init container to a separate `linkerd/proxy-init` Git repository ## stable-2.3.2 This stable release fixes a memory leak in the proxy. To install this release, run: `curl https://run.linkerd.io/install | sh` **Full release notes**: * Proxy * Fixed a memory leak that can occur if an HTTP/2 request with a payload ends before the entire payload is sent to the destination ## edge-19.5.4 * CLI * Added a JSON option to the `linkerd edges` command so that output is scripting friendly and can be parsed easily (thanks @alenkacz!) * Controller * **New** Control plane installations now generate a self-signed certificate and private key pair for each webhook, to prepare for future work to make the proxy injector and service profile validator HA * Added a debug container annotation, allowing the `--enable-debug-sidecar` flag to work when auto-injecting Linkerd proxies * Proxy * Changed the proxy's routing behavior so that, when the control plane does not resolve a destination, the proxy forwards the request with minimal additional routing logic * Fixed a bug in the proxy's HPACK codec that could cause requests with very large header values to hang indefinitely * Web UI * Removed the Authorities table and sidebar link from the dashboard to prepare for a new, improved dashboard view communicating authority data * Internal * Modified the integration test for `linkerd upgrade` to test upgrading from the latest stable release instead of the latest edge, to reflect the typical use case ## stable-2.3.1 This stable release adds a number of proxy stability improvements. To install this release, run: `curl https://run.linkerd.io/install | sh` **Special thanks to**: @zaharidichev and @11Takanori! **Full release notes**: * Proxy * Changed the proxy's routing behavior so that, when the control plane does not resolve a destination, the proxy forwards the request with minimal additional routing logic * Fixed a bug in the proxy's HPACK codec that could cause requests with very large header values to hang indefinitely * Replaced the fixed reconnect backoff with an exponential one (thanks, @zaharidichev!) * Fixed an issue where requests could be held indefinitely by the load balancer * Added a dispatch timeout that limits the amount of time a request can be buffered in the proxy * Removed the limit on the number of concurrently active service discovery queries to the destination service * Fixed an epoll notification issue that could cause excessive CPU usage * Added the ability to disable tap by setting an env var (thanks, @zaharidichev!) ## edge-19.5.3 * CLI * **New** Added a `linkerd edges` command that shows the source and destination name and identity for proxied connections, to assist in debugging * Tap can now be disabled for specific pods during injection by using the `--disable-tap` flag, or by using the `config.linkerd.io/disable-tap` annotation * Introduced pre-install healthcheck for clock skew (thanks, @matej-g!) * Controller * Added Controller Component Labels to the webhook config resources (thanks, @Pothulapati!) * Moved the tap service into its own pod * Proxy * Fix an epoll notification issue that could cause excessive CPU usage * Added the ability to disable tap by setting an env var (thanks, @zaharidichev!) ## edge-19.5.2 * CLI * Fixed `linkerd check` and `linkerd dashboard` failing when any control plane pod is not ready, even when multiple replicas exist (as in HA mode) * Controller * Fixed control plane components failing on startup when the Kubernetes API returns an `ErrGroupDiscoveryFailed` * Proxy * Added a dispatch timeout that limits the amount of time a request can be buffered in the proxy * Removed the limit on the number of concurrently active service discovery queries to the destination service Special thanks to @zaharidichev for adding end to end tests for proxies with TLS! ## edge-19.5.1 * CLI * Added a `linkerd check config` command for verifying that `linkerd install config` was successful * Improved the help documentation of `linkerd install` to clarify flag usage * Added support for private Kubernetes clusters by changing the CLI to connect to the control plane using a port-forward (thanks, @jackprice!) * Controller * Fixed pod creation failure when a `ResourceQuota` exists by adding a default resource spec for the proxy-init init container * Proxy * Replaced the fixed reconnect backoff with an exponential one (thanks, @zaharidichev!) * Fixed an issue where load balancers can become stuck * Internal * Fixed integration tests by adding known proxy-injector log warning to tests ## edge-19.4.5 ### Significant Update As of this edge release the proxy injector component is always installed. To have the proxy injector inject a pod you still can manually add the `linkerd.io/inject: enable` annotation into the pod spec, or at the namespace level to have all your pods be injected by default. With this release the behaviour of the `linkerd inject` command changes, where the proxy sidecar container YAML is no longer included in its output by default, but instead it will just add the annotations to defer the injection to the proxy injector. For use cases that require the full injected YAML to be output, a new `--manual` flag has been added. Another important update is the introduction of install stages. You still have the old `linkerd install` command, but now it can be broken into `linkerd install config` which installs the resources that require cluster-level privileges, and `linkerd install control-plane` that continues with the resources that only require namespace-level privileges. This also applies to the `linkerd upgrade` command. * CLI * **Breaking Change** Removed the `--proxy-auto-inject` flag, as the proxy injector is now always installed * **Breaking Change** Replaced the `--linkerd-version` flag with the `--proxy-version` flag in the `linkerd install` and `linkerd upgrade` commands, which allows setting the version for the injected proxy sidecar image, without changing the image versions for the control plane * Introduced install stages: `linkerd install config` and `linkerd install control-plane` * Introduced upgrade stages: `linkerd upgrade config` and `linkerd upgrade control-plane` * Introduced a new `--from-manifests` flag to `linkerd upgrade` allowing manually feeding a previously saved output of `linkerd install` into the command, instead of requiring a connection to the cluster to fetch the config * Introduced a new `--manual` flag to `linkerd inject` to output the proxy sidecar container spec * Introduced a new `--enable-debug-sidecar` option to `linkerd inject`, that injects a debug sidecar to inspect traffic to and from the meshed pod * Added a new check for unschedulable pods and PSP issues (thanks, @liquidslr!) * Disabled the spinner in `linkerd check` when running without a TTY * Ensured the ServiceAccount for the proxy injector is created before its Deployment to avoid warnings when installing the proxy injector (thanks, @dwj300!) * Controller * Added Go pprof HTTP endpoints to all control plane components' admin servers to better assist debugging efforts * Fixed bug in the proxy injector, where sporadically the pod workload owner wasn't properly determined, which would result in erroneous stats * Added support for a new `config.linkerd.io/disable-identity` annotation to opt out of identity for a specific pod * Web UI * Added the Font Awesome stylesheet locally; this allows both Font Awesome and Material-UI sidebar icons to display consistently with no/limited internet access (thanks again, @liquidslr!) * Internal * Known container errors were hidden in the integration tests; now they are reported in the output, still without having the tests fail ## stable-2.3.0 This stable release introduces a new TLS-based service identity system into the default Linkerd installation, replacing `--tls=optional` and the `linkerd-ca` controller. Now, proxies generate ephemeral private keys into a tmpfs directory and dynamically refresh certificates, authenticated by Kubernetes ServiceAccount tokens, and tied to ServiceAccounts as the identity primitive In this release, all meshed HTTP communication is private and authenticated by default. Among the many improvements to the web dashboard, we've added a Community page to surface news and updates from linkerd.io. For more details, see the announcement blog post: To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: The `linkerd-ca` controller has been removed in favor of the `linkerd-identity` controller. If you had previously installed Linkerd with `--tls=optional`, manually delete the `linkerd-ca` deployment after upgrading. Also, `--single-namespace` mode is no longer supported. For full details on upgrading to this release, please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-3-0). **Special thanks to**: @codeman9, @harsh-98, @huynq0911, @KatherineMelnyk, @liquidslr, @paranoidaditya, @Pothulapati, @TwinProduction, and @yb172! **Full release notes**: * CLI * Introduced an `upgrade` command! This allows an existing Linkerd control plane to be reinstalled or reconfigured; it is particularly useful for automatically reusing flags set in the previous `install` or `upgrade` * Introduced the `linkerd metrics` command for fetching proxy metrics * **Breaking Change:** The `--linkerd-cni-enabled` flag has been removed from the `inject` command; CNI is configured at the cluster level with the `install` command and no longer applies to the `inject` command * **Breaking Change** Removed the `--disable-external-profiles` flag from the `install` command; external profiles are now disabled by default and can be enabled with the new `--enable-external-profiles` flag * **Breaking change** Removed the `--api-port` flag from the `inject` and `install` commands, since there's no benefit to running the control plane's destination API on a non-default port (thanks, @paranoidaditya) * **Breaking change** Removed the `--tls=optional` flag from the `linkerd install` command, since TLS is now enabled by default * Changed `install` to accept or generate an issuer Secret for the Identity controller * Changed `install` to fail in the case of a conflict with an existing installation; this can be disabled with the `--ignore-cluster` flag * Added the ability to adjust the Prometheus log level via `--controller-log-level` * Implemented `--proxy-cpu-limit` and `--proxy-memory-limit` for setting the proxy resources limits (`--proxy-cpu` and `--proxy-memory` were deprecated in favor of `proxy-cpu-request` and `proxy-memory-request`) (thanks @TwinProduction!) * Added a validator for the `--proxy-log-level` flag * Updated the `inject` and `uninject` subcommands to issue warnings when resources lack a `Kind` property (thanks @Pothulapati!) * The `inject` command proxy options are now converted into config annotations; the annotations ensure that these configs are persisted in subsequent resource updates * Changed `inject` to require fetching a configuration from the control plane; this can be disabled with the `--ignore-cluster` and `--disable-identity` flags, though this will prevent the injected pods from participating in mesh identity * Included kubectl version check as part of `linkerd check` (thanks @yb172!) * Updated `linkerd check` to ensure hint URLs are displayed for RPC checks * Fixed sporadic (and harmless) race condition error in `linkerd check` * Introduced a check for NET_ADMIN in `linkerd check` * Fixed permissions check for CRDs * Updated the `linkerd dashboard` command to serve the dashboard on a fixed port, allowing it to leverage browser local storage for user settings * Updated the `linkerd routes` command to display rows for routes that are not receiving any traffic * Added TCP stats to the stat command, under the `-o wide` and `-o json` flags * The `stat` command now always shows the number of open TCP connections * Removed TLS metrics from the `stat` command; this is in preparation for surfacing identity metrics in a clearer way * Exposed the `install-cni` command and its flags, and tweaked their descriptions * Eliminated false-positive vulnerability warnings related to go.uuid * Controller * Added a new public API endpoint for fetching control plane configuration * **Breaking change** Removed support for running the control plane in single-namespace mode, which was severely limited in the number of features it supported due to not having access to cluster-wide resources; the end goal being Linkerd degrading gracefully depending on its privileges * Updated automatic proxy injection and CLI injection to support overriding inject defaults via pod spec annotations * Added support for the `config.linkerd.io/proxy-version` annotation on pod specs; this will override the injected proxy version * The auto-inject admission controller webhook is updated to watch pods creation and update events; with this change, proxy auto-injection now works for all kinds of workloads, including StatefulSets, DaemonSets, Jobs, etc * Service profile validation is now performed via a webhook endpoint; this prevents Kubernetes from accepting invalid service profiles * Changed the default CPU request from `10m` to `100m` for HA deployments; this will help some intermittent liveness/readiness probes from failing due to tight resource constraints * Updated destination service to return TLS identities only when the destination pod is TLS-aware and is in the same controller namespace * Lessen klog level to improve security * Updated control plane components to query Kubernetes at startup to determine authorized namespaces and if ServiceProfile support is available * Modified the stats payload to include the following TCP stats: `tcp_open_connections`, `tcp_read_bytes_total`, `tcp_write_bytes_total` * Instrumented clients in the control plane connecting to Kubernetes, thus providing better visibility for diagnosing potential problems with those connections * Renamed the "linkerd-proxy-api" service to "linkerd-destination" * Bumped Prometheus to version 2.7.1 and Grafana to version 5.4.3 * Proxy * Introduced per-proxy private key generation and dynamic certificate renewal * **Fixed** a connection starvation issue where TLS discovery detection on slow or idle connections could block all other connections from being accepted on the inbound listener of the proxy * **Fixed** a stream leak between the proxy and the control plane that could cause the `linkerd-controller` pod to use an excessive amount of memory * Added a readiness check endpoint on `:4191/ready` so that Kubernetes doesn't consider pods ready until they have acquired a certificate from the Identity controller * Some `l5d-*` informational headers have been temporarily removed from requests and responses because they could leak information to external clients * The proxy's connect timeouts have been updated, especially to improve reconnect behavior between the proxy and the control plane * Increased the inbound/router cap on MAX_CONCURRENT_STREAMS * The `l5d-remote-ip` header is now set on inbound requests and outbound responses * Fixed issue with proxy falling back to filesystem polling due to improperly sized inotify buffer * Web UI * **New** Added a Community page to surface news and updates from linkerd.io * Added a Debug page to the web dashboard, allowing you to introspect service discovery state * The Overview page in the Linkerd dashboard now renders appropriately when viewed on mobile devices * Added filter functionality to the metrics tables * Added stable sorting for table rows * Added TCP stats to the Linkerd Pod Grafana dashboard * Added TCP stat tables on the namespace landing page and resource detail page * The topology graph now shows TCP stats if no HTTP stats are available * Improved table display on the resource detail page for resources with TCP-only traffic * Updated the resource detail page to start displaying a table with TCP stats * Modified the Grafana variable queries to use a TCP-based metric, so that if there is only TCP traffic then the dropdowns don't end up empty * Fixed sidebar not updating when resources were added/deleted (thanks @liquidslr!) * Added validation to the "new service profile" form (thanks @liquidslr!) * Added a Grafana dashboard and web tables for displaying Job stats (thanks, @Pothulapati!) * Removed TLS columns from the dashboard tables; this is in preparation for surfacing identity metrics in a clearer way * Fixed the behavior of the Top query 'Start' button if a user's query returns no data * Fixed an issue with the order of tables returned from a Top Routes query * Added text wrap for paths in the modal for expanded Tap query data * Fixed a quoting issue with service profile downloads (thanks, @liquidslr!) * Updated sorting of route table to move default routes to the bottom * Removed 'Help' hierarchy and surfaced links on navigation sidebar * Ensured that all the tooltips in Grafana displaying the series are shared across all the graphs * Internals * Improved the `bin/go-run` script for the build process so that on failure, all associated background processes are terminated * Added more log errors to the integration tests * Removed the GOPATH dependence from the CLI dev environment * Consolidated injection code from CLI and admission controller code paths * Enabled the following linters: `unparam`, `unconvert`, `goimports`, `goconst`, `scopelint`, `unused`, `gosimple` * Bumped base Docker images * Added the flags `-update` and `-pretty-diff` to tests to allow overwriting fixtures and to print the full text of the fixtures upon mismatches * Introduced golangci-lint tooling, using `.golangci.yml` to centralize the config * Added a `-cover` parameter to track code coverage in go tests (more info in TEST.md) * Renamed a function in a test that was shadowing a go built-in function (thanks @huynq0911!) ## edge-19.4.4 * Proxy * **Fixed** a connection starvation issue where TLS discovery detection on slow or idle connections could block all other connections from being accepted on the inbound listener of the proxy * CLI * **Fixed** `inject` to allow the `--disable-identity` flag to be used without having to specify the `--ignore-cluster` flag * Web UI * The Overview page in the Linkerd dashboard now renders appropriately when viewed on mobile devices ## edge-19.4.3 * CLI * **Fixed** `linkerd upgrade` command not upgrading proxy containers (thanks @jon-walton for the issue report!) * **Fixed** `linkerd upgrade` command not installing the identity service when it was not already installed * Eliminate false-positive vulnerability warnings related to go.uuid Special thanks to @KatherineMelnyk for updating the web component to read the UUID from the `linkerd-config` ConfigMap! ## edge-19.4.2 * CLI * Removed TLS metrics from the `stat` command; this is in preparation for surfacing identity metrics in a clearer way * The `upgrade` command now outputs a URL that explains next steps for upgrading * **Breaking Change:** The `--linkerd-cni-enabled` flag has been removed from the `inject` command; CNI is configured at the cluster level with the `install` command and no longer applies to the `inject` command * Controller * Service profile validation is now performed via a webhook endpoint; this prevents Kubernetes from accepting invalid service profiles * Added support for the `config.linkerd.io/proxy-version` annotation on pod specs; this will override the injected proxy version * Changed the default CPU request from `10m` to `100m` for HA deployments; this will help some intermittent liveness/readiness probes from failing due to tight resource constraints * Proxy * The `CommonName` field on CSRs is now set to the proxy's identity name * Web UI * Removed TLS columns from the dashboard tables; this is in preparation for surfacing identity metrics in a clearer way ## edge-19.4.1 * CLI * Introduced an `upgrade` command! This allows an existing Linkerd control plane to be reinstalled or reconfigured; it is particularly useful for automatically reusing flags set in the previous `install` or `upgrade` * The `inject` command proxy options are now converted into config annotations; the annotations ensure that these configs are persisted in subsequent resource updates * The `stat` command now always shows the number of open TCP connections * **Breaking Change** Removed the `--disable-external-profiles` flag from the `install` command; external profiles are now disabled by default and can be enabled with the new `--enable-external-profiles` flag * Controller * The auto-inject admission controller webhook is updated to watch pods creation and update events; with this change, proxy auto-injection now works for all kinds of workloads, including StatefulSets, DaemonSets, Jobs, etc * Proxy * Some `l5d-*` informational headers have been temporarily removed from requests and responses because they could leak information to external clients * Web UI * The topology graph now shows TCP stats if no HTTP stats are available * Improved table display on the resource detail page for resources with TCP-only traffic * Added validation to the "new service profile" form (thanks @liquidslr!) ## edge-19.3.3 ### Significant Update This edge release introduces a new TLS Identity system into the default Linkerd installation, replacing `--tls=optional` and the `linkerd-ca` controller. Now, proxies generate ephemeral private keys into a tmpfs directory and dynamically refresh certificates, authenticated by Kubernetes ServiceAccount tokens, via the newly-introduced Identity controller. Now, all meshed HTTP communication is private and authenticated by default. * CLI * Changed `install` to accept or generate an issuer Secret for the Identity controller * Changed `install` to fail in the case of a conflict with an existing installation; this can be disabled with the `--ignore-cluster` flag * Changed `inject` to require fetching a configuration from the control plane; this can be disabled with the `--ignore-cluster` and `--disable-identity` flags, though this will prevent the injected pods from participating in mesh identity * **Breaking change** Removed the `--tls=optional` flag from the `linkerd install` command, since TLS is now enabled by default * Added the ability to adjust the Prometheus log level * Proxy * **Fixed** a stream leak between the proxy and the control plane that could cause the `linkerd-controller` pod to use an excessive amount of memory * Introduced per-proxy private key generation and dynamic certificate renewal * Added a readiness check endpoint on `:4191/ready` so that Kubernetes doesn't consider pods ready until they have acquired a certificate from the Identity controller * The proxy's connect timeouts have been updated, especially to improve reconnect behavior between the proxy and the control plane * Web UI * Added TCP stats to the Linkerd Pod Grafana dashboard * Fixed the behavior of the Top query 'Start' button if a user's query returns no data * Added stable sorting for table rows * Fixed an issue with the order of tables returned from a Top Routes query * Added text wrap for paths in the modal for expanded Tap query data * Internal * Improved the `bin/go-run` script for the build process so that on failure, all associated background processes are terminated Special thanks to @liquidslr for many useful UI and log changes, and to @mmalone and @sourishkrout at @smallstep for collaboration and advice on the Identity system! ## edge-19.3.2 * Controller * **Breaking change** Removed support for running the control plane in single-namespace mode, which was severely limited in the number of features it supported due to not having access to cluster-wide resources * Updated automatic proxy injection and CLI injection to support overriding inject defaults via pod spec annotations * Added a new public API endpoint for fetching control plane configuration * CLI * **Breaking change** Removed the `--api-port` flag from the `inject` and `install` commands, since there's no benefit to running the control plane's destination API on a non-default port (thanks, @paranoidaditya) * Introduced the `linkerd metrics` command for fetching proxy metrics * Updated the `linkerd routes` command to display rows for routes that are not receiving any traffic * Updated the `linkerd dashboard` command to serve the dashboard on a fixed port, allowing it to leverage browser local storage for user settings * Web UI * **New** Added a Community page to surface news and updates from linkerd.io * Fixed a quoting issue with service profile downloads (thanks, @liquidslr!) * Added a Grafana dashboard and web tables for displaying Job stats (thanks, @Pothulapati!) * Updated sorting of route table to move default routes to the bottom * Added TCP stat tables on the namespace landing page and resource detail page ## edge-19.3.1 * CLI * Introduced a check for NET_ADMIN in `linkerd check` * Fixed permissions check for CRDs * Included kubectl version check as part of `linkerd check` (thanks @yb172!) * Added TCP stats to the stat command, under the `-o wide` and `-o json` flags * Controller * Updated the `mutatingwebhookconfiguration` so that it is recreated when the proxy injector is restarted, so that the MWC always picks up the latest config template during version upgrade * Proxy * Increased the inbound/router cap on MAX_CONCURRENT_STREAMS * The `l5d-remote-ip` header is now set on inbound requests and outbound responses * Web UI * Fixed sidebar not updating when resources were added/deleted (thanks @liquidslr!) * Added filter functionality to the metrics tables * Internal * Added more log errors to the integration tests * Removed the GOPATH dependence from the CLI dev environment * Consolidated injection code from CLI and admission controller code paths ## edge-19.2.5 * CLI * Updated `linkerd check` to ensure hint URLs are displayed for RPC checks * Controller * Updated the auto-inject admission controller webhook to respond to UPDATE events for deployment workloads * Updated destination service to return TLS identities only when the destination pod is TLS-aware and is in the same controller namespace * Lessen klog level to improve security * Updated control plane components to query Kubernetes at startup to determine authorized namespaces and if ServiceProfile support is available * Modified the stats payload to include the following TCP stats: `tcp_open_connections`, `tcp_read_bytes_total`, `tcp_write_bytes_total` * Proxy * Fixed issue with proxy falling back to filesystem polling due to improperly sized inotify buffer * Web UI * Removed 'Help' hierarchy and surfaced links on navigation sidebar * Added a Debug page to the web dashboard, allowing you to introspect service discovery state * Updated the resource detail page to start displaying a table with TCP stats * Internal * Enabled the following linters: `unparam`, `unconvert`, `goimports`, `goconst`, `scopelint`, `unused`, `gosimple` * Bumped base Docker images ## stable-2.2.1 This stable release polishes some of the CLI help text and fixes two issues that came up since the stable-2.2.0 release. To install this release, run: `curl https://run.linkerd.io/install | sh` **Full release notes**: * CLI * Fixed handling of kubeconfig server urls that include paths * Updated the description of the `--proxy-auto-inject` flag to indicate that it is no longer experimental * Updated the `profile` help text to match the other commands * Added the "ep" alias for the `endpoints` command * Controller * Stopped logging an error when a route doesn't specify a timeout ## edge-19-2.4 * CLI * Implemented `--proxy-cpu-limit` and `--proxy-memory-limit` for setting the proxy resources limits (`--proxy-cpu` and `--proxy-memory` were deprecated in favor of `proxy-cpu-request` and `proxy-memory-request`) (thanks @TwinProduction!) * Updated the `inject` and `uninject` subcommands to issue warnings when resources lack a `Kind` property (thanks @Pothulapati!) * Exposed the `install-cni` command and its flags, and tweaked their descriptions * Fixed handling of kubeconfig server urls that include paths * Updated the description of the `--proxy-auto-inject` flag to indicate that it is no longer experimental * Updated the `profile` help text to match the other commands * Added the "ep" alias for the `endpoints` command (also @Pothulapati!) * Added a validator for the `--proxy-log-level` flag * Fixed sporadic (and harmless) race condition error in `linkerd check` * Controller * Instrumented clients in the control plane connecting to Kubernetes, thus providing better visibility for diagnosing potential problems with those connections * Stopped logging an error when a route doesn't specify a timeout * Renamed the "linkerd-proxy-api" service to "linkerd-destination" * Bumped Prometheus to version 2.7.1 and Grafana to version 5.4.3 * Web UI * Modified the Grafana variable queries to use a TCP-based metric, so that if there is only TCP traffic then the dropdowns don't end up empty * Ensured that all the tooltips in Grafana displaying the series are shared across all the graphs * Internals * Added the flags `-update` and `-pretty-diff` to tests to allow overwriting fixtures and to print the full text of the fixtures upon mismatches * Introduced golangci-lint tooling, using `.golangci.yml` to centralize the config * Added a `-cover` parameter to track code coverage in go tests (more info in TEST.md) * Added integration tests for `--single-namespace` * Renamed a function in a test that was shadowing a go built-in function (thanks @huynq0911!) ## stable-2.2.0 This stable release introduces automatic request retries and timeouts, and graduates auto-inject to be a fully-supported (non-experimental) feature. It adds several new CLI commands, including `logs` and `endpoints`, that provide diagnostic visibility into Linkerd's control plane. Finally, it introduces two exciting experimental features: a cryptographically-secured client identity header, and a CNI plugin that avoids the need for `NET_ADMIN` kernel capabilities at deploy time. For more details, see the announcement blog post: To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: The default behavior for proxy auto injection and service profile ownership has changed as part of this release. Please see the [upgrade instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-2-0) for more details. **Special thanks to**: @alenkacz, @codeman9, @jonrichards, @radu-matei, @yeya24, and @zknill **Full release notes**: * CLI * Improved service profile validation when running `linkerd check` in order to validate service profiles in all namespaces * Added the `linkerd endpoints` command to introspect Linkerd's service discovery state * Added the `--tap` flag to `linkerd profile` to generate service profiles using the route results seen during the tap * Added support for the `linkerd.io/inject: disabled` annotation on pod specs to disable injection for specific pods when running `linkerd inject` * Added support for `basePath` in OpenAPI 2.0 files when running `linkerd profile --open-api` * Increased `linkerd check` client timeout from 5 seconds to 30 seconds to fix issues for clusters with slow API servers * Updated `linkerd routes` to no longer return rows for `ExternalName` services in the namespace * Broadened the set of valid URLs when connecting to the Kubernetes API * Added the `--proto` flag to `linkerd profile` to output a service profile based on a Protobuf spec file * Fixed CLI connection failures to clusters that use self-signed certificates * Simplified `linkerd install` so that setting up proxy auto-injection (flag `--proxy-auto-inject`) no longer requires enabling TLS (flag `--tls`) * Added links for each `linkerd check` failure, pointing to a relevant section in our new FAQ page with resolution steps for each case * Added optional `linkerd install-sp` command to generate service profiles for the control plane, providing per-route metrics for control plane components * Removed `--proxy-bind-timeout` flag from `linkerd install` and `linkerd inject`, as the proxy no longer accepts this environment variable * Improved CLI appearance on Windows systems * Improved `linkerd check` output, fixed bug with `--single-namespace` * Fixed panic when `linkerd routes` is called in single-namespace mode * Added `linkerd logs` command to surface logs from any container in the Linkerd control plane * Added `linkerd uninject` command to remove the Linkerd proxy from a Kubernetes config * Improved `linkerd inject` to re-inject a resource that already has a Linkerd proxy * Improved `linkerd routes` to list all routes, including those without traffic * Improved readability in `linkerd check` and `linkerd inject` outputs * Adjusted the set of checks that are run before executing CLI commands, which allows the CLI to be invoked even when the control plane is not fully ready * Fixed reporting of injected resources when the `linkerd inject` command is run on `List` type resources with multiple items * Updated the `linkerd dashboard` command to use port-forwarding instead of proxying when connecting to the web UI and Grafana * Added validation for the `ServiceProfile` CRD * Updated the `linkerd check` command to disallow setting both the `--pre` and `--proxy` flags simultaneously * Added `--routes` flag to the `linkerd top` command, for grouping table rows by route instead of by path * Updated Prometheus configuration to automatically load `*_rules.yml` files * Removed TLS column from the `linkerd routes` command output * Updated `linkerd install` output to use non-default service accounts, `emptyDir` volume mounts, and non-root users * Removed cluster-wide resources from single-namespace installs * Fixed resource requests for proxy-injector container in `--ha` installs * Controller * Fixed issue with auto-injector not setting the proxy ID, which is required to successfully locate client service profiles * Added full stat and tap support for DaemonSets and StatefulSets in the CLI, Grafana, and web UI * Updated auto-injector to use the proxy log level configured at install time * Fixed issue with auto-injector including TLS settings in injected pods even when TLS was not enabled * Changed automatic proxy injection to be opt-in via the `linkerd.io/inject` annotation on the pod or namespace * Move service profile definitions to client and server namespaces, rather than the control plane namespace * Added `linkerd.io/created-by` annotation to the linkerd-cni DaemonSet * Added a 10 second keepalive default to resolve dropped connections in Azure environments * Improved node selection for installing the linkerd-cni DaemonSet * Corrected the expected controller identity when configuring pods with TLS * Modified klog to be verbose when controller log-level is set to `debug` * Added support for retries and timeouts, configured directly in the service profile for each route * Added an experimental CNI plugin to avoid requiring the NET_ADMIN capability when injecting proxies * Improved the API for `ListPods` * Fixed `GetProfiles` API call not returning immediately when no profile exists (resulting in proxies logging warnings) * Blocked controller initialization until caches have synced with kube API * Fixed proxy-api handling of named target ports in service configs * Added parameter to stats API to skip retrieving prometheus stats * Web UI * Updated navigation to link the Linkerd logo back to the Overview page * Fixed console warnings on the Top page * Grayed-out the tap icon for requests from sources that are not meshed * Improved resource detail pages to show all resource types * Fixed stats not appearing for routes that have service profiles installed * Added "meshed" and "no traffic" badges on the resource detail pages * Fixed `linkerd dashboard` to maintain proxy connection when browser open fails * Fixed JavaScript bundling to avoid serving old versions after upgrade * Reduced the size of the webpack JavaScript bundle by nearly 50% * Fixed an indexing error on the top results page * Restored unmeshed resources in the network graph on the resource detail page * Adjusted label for unknown routes in route tables, added tooltip * Updated Top Routes page to persist form settings in URL * Added button to create new service profiles on Top Routes page * Fixed CLI commands displayed when linkerd is running in non-default namespace * Proxy * Modified the way in which canonicalization warnings are logged to reduce the overall volume of error logs and make it clearer when failures occur * Added TCP keepalive configuration to fix environments where peers may silently drop connections * Updated the `Get` and `GetProfiles` APIs to accept a `proxy_id` parameter in order to return more tailored results * Removed TLS fallback-to-plaintext if handshake fails * Added the ability to override a proxy's normal outbound routing by adding an `l5d-override-dst` header * Added `LINKERD2_PROXY_DNS_CANONICALIZE_TIMEOUT` environment variable to customize the timeout for DNS queries to canonicalize a name * Added support for route timeouts in service profiles * Improved logging for gRPC errors and for malformed HTTP/2 request headers * Improved log readability by moving some noisy log messages to more verbose log levels * Fixed a deadlock in HTTP/2 stream reference counts * Updated the proxy-init container to exit with a non-zero exit code if initialization fails, making initialization errors much more visible * Fixed a memory leak due to leaked UDP sockets for failed DNS queries * Improved configuration of the PeakEwma load balancer * Improved handling of ports configured to skip protocol detection when the proxy is running with TLS enabled ## edge-19.2.3 * Controller * Fixed issue with auto-injector not setting the proxy ID, which is required to successfully locate client service profiles * Web UI * Updated navigation to link the Linkerd logo back to the Overview page * Fixed console warnings on the Top page ## edge-19.2.2 * CLI * Improved service profile validation when running `linkerd check` in order to validate service profiles in all namespaces * Controller * Added stat and tap support for StatefulSets in the CLI, Grafana, and web UI * Updated auto-injector to use the proxy log level configured at install time * Fixed issue with auto-injector including TLS settings in injected pods even when TLS was not enabled * Proxy * Modified the way in which canonicalization warnings are logged to reduce the overall volume of error logs and make it clearer when failures occur ## edge-19.2.1 * Controller * **Breaking change** Changed automatic proxy injection to be opt-in via the `linkerd.io/inject` annotation on the pod or namespace. More info: * **Breaking change** `ServiceProfile`s are now defined in client and server namespaces, rather than the control plane namespace. `ServiceProfile`s defined in the client namespace take priority over ones defined in the server namespace * Added `linkerd.io/created-by` annotation to the linkerd-cni DaemonSet (thanks @codeman9!) * Added a 10 second keepalive default to resolve dropped connections in Azure environments * Improved node selection for installing the linkerd-cni DaemonSet (thanks @codeman9!) * Corrected the expected controller identity when configuring pods with TLS * Modified klog to be verbose when controller log-level is set to `Debug` * CLI * Added the `linkerd endpoints` command to introspect Linkerd's service discovery state * Added the `--tap` flag to `linkerd profile` to generate a `ServiceProfile` by using the route results seen during the tap * Added support for the `linkerd.io/inject: disabled` annotation on pod specs to disable injection for specific pods when running `linkerd inject` * Added support for `basePath` in OpenAPI 2.0 files when running `linkerd profile --open-api` * Increased `linkerd check` client timeout from 5 seconds to 30 seconds to fix issues for clusters with a slower API server * `linkerd routes` will no longer return rows for `ExternalName` services in the namespace * Broadened set of valid URLs when connecting to the Kubernetes API * Improved `ServiceProfile` field validation in `linkerd check` * Proxy * Added TCP keepalive configuration to fix environments where peers may silently drop connections * The `Get` and `GetProfiles` API now accept a `proxy_id` parameter in order to return more tailored results * Removed TLS fallback-to-plaintext if handshake fails ## edge-19.1.4 * Controller * Added support for timeouts! Configurable in the service profiles for each route * Added an experimental CNI plugin to avoid requiring the NET_ADMIN capability when injecting proxies (more details at (thanks @codeman9!) * Added more improvements to the API for `ListPods` (thanks @alenkacz!) * Web UI * Grayed-out the tap icon for requests from sources that are not meshed * CLI * Added the `--proto` flag to `linkerd profile` to output a service profile based on a Protobuf spec file * Fixed CLI connection failure to clusters that use self-signed certificates * Simplified `linkerd install` so that setting up proxy auto-injection (flag `--proxy-auto-inject`) no longer requires enabling TLS (flag `--tls`) * Added links for each `linkerd check` failure, pointing to a relevant section in our new FAQ page with resolution steps for each case ## edge-19.1.3 * Controller * Improved API for `ListPods` (thanks @alenkacz!) * Fixed `GetProfiles` API call not returning immediately when no profile exists (resulting in proxies logging warnings) * Web UI * Improved resource detail pages now show all resource types * Fixed stats not appearing for routes that have service profiles installed * CLI * Added optional `linkerd install-sp` command to generate service profiles for the control plane, providing per-route metrics for control plane components * Removed `--proxy-bind-timeout` flag from `linkerd install` and `linkerd inject` commands, as the proxy no longer accepts this environment variable * Improved CLI appearance on Windows systems * Improved `linkerd check` output, fixed check bug when using `--single-namespace` (thanks to @djeeg for the bug report!) * Improved `linkerd stat` now supports DaemonSets (thanks @zknill!) * Fixed panic when `linkerd routes` is called in single-namespace mode * Proxy * Added the ability to override a proxy's normal outbound routing by adding an `l5d-override-dst` header * Added `LINKERD2_PROXY_DNS_CANONICALIZE_TIMEOUT` environment variable to customize the timeout for DNS queries to canonicalize a name * Added support for route timeouts in service profiles * Improved logging for gRPC errors and for malformed HTTP/2 request headers * Improved log readability by moving some noisy log messages to more verbose log levels ## edge-19.1.2 * Controller * Retry support! Introduce an `isRetryable` property to service profiles to enable configuring retries on a per-route basis * Web UI * Add "meshed" and "no traffic" badges on the resource detail pages * Fix `linkerd dashboard` to maintain proxy connection when browser open fails * Fix JavaScript bundling to avoid serving old versions after upgrade * CLI * Add `linkerd logs` command to surface logs from any container in the Linkerd control plane (shout out to [Stern](https://github.com/wercker/stern)!) * Add `linkerd uninject` command to remove the Linkerd proxy from a Kubernetes config * Improve `linkerd inject` to re-inject a resource that already has a Linkerd proxy * Improve `linkerd routes` to list all routes, including those without traffic * Improve readability in `linkerd check` and `linkerd inject` outputs * Proxy * Fix a deadlock in HTTP/2 stream reference counts ## edge-19.1.1 * CLI * Adjust the set of checks that are run before executing CLI commands, which allows the CLI to be invoked even when the control plane is not fully ready * Fix reporting of injected resources when the `linkerd inject` command is run on `List` type resources with multiple items * Update the `linkerd dashboard` command to use port-forwarding instead of proxying when connecting to the web UI and Grafana * Add validation for the `ServiceProfile` CRD (thanks, @alenkacz!) * Update the `linkerd check` command to disallow setting both the `--pre` and `--proxy` flags simultaneously (thanks again, @alenkacz!) * Web UI * Reduce the size of the webpack JavaScript bundle by nearly 50%! * Fix an indexing error on the top results page * Proxy * **Fixed** The proxy-init container now exits with a non-zero exit code if initialization fails, making initialization errors much more visible * **Fixed** The proxy previously leaked UDP sockets for failed DNS queries, causing a memory leak; this has been fixed ## edge-18.12.4 Upgrade notes: The control plane components have been renamed as of the edge-18.12.1 release to reduce possible naming collisions. To upgrade an older installation, see the [Upgrade Guide](https://linkerd.io/2/upgrade/). * CLI * Add `--routes` flag to the `linkerd top` command, for grouping table rows by route instead of by path * Update Prometheus configuration to automatically load `*_rules.yml` files * Remove TLS column from the `linkerd routes` command output * Web UI * Restore unmeshed resources in the network graph on the resource detail page * Reduce the overall size of the asset bundle for the web frontend * Proxy * Improve configuration of the PeakEwma load balancer Special thanks to @radu-matei for cleaning up a whole slew of Go lint warnings, and to @jonrichards for improving the Rust build setup! ## edge-18.12.3 Upgrade notes: The control plane components have been renamed as of the edge-18.12.1 release to reduce possible naming collisions. To upgrade an older installation, see the [Upgrade Guide](https://linkerd.io/2/upgrade/). * CLI * Multiple improvements to the `linkerd install` config (thanks @codeman9!) * Use non-default service accounts for grafana and web deployments * Use `emptyDir` volume mount for prometheus and grafana pods * Set security context on control plane components to not run as root * Remove cluster-wide resources from single-namespace installs * Disable service profiles in single-namespace mode * Require that namespace already exist for single-namespace installs * Fix resource requests for proxy-injector container in `--ha` installs * Controller * Block controller initialization until caches have synced with kube API * Fix proxy-api handling of named target ports in service configs * Add parameter to stats API to skip retrieving prometheus stats (thanks, @alpeb!) * Web UI * Adjust label for unknown routes in route tables, add tooltip * Update Top Routes page to persist form settings in URL * Add button to create new service profiles on Top Routes page * Fix CLI commands displayed when linkerd is running in non-default namespace * Proxy * Proxies with TLS enabled now honor ports configured to skip protocol detection ## stable-2.1.0 This stable release introduces several major improvements, including per-route metrics, service profiles, and a vastly improved dashboard UI. It also adds several significant experimental features, including proxy auto-injection, single namespace installs, and a high-availability mode for the control plane. For more details, see the announcement blog post: To install this release, run: `curl https://run.linkerd.io/install | sh` **Upgrade notes**: The control plane components have been renamed in this release to reduce possible naming collisions. Please make sure to read the [upgrade instructions](https://linkerd.io/2/upgrade/#upgrade-notice-stable-2-1-0) if you are upgrading from the `stable-2.0.0` release. **Special thanks to**: @alenkacz, @alpeb, @benjdlambert, @fahrradflucht, @ffd2subroutine, @hypnoglow, @ihcsim, @lucab, and @rochacon **Full release notes**: * CLI * `linkerd routes` command displays per-route stats for *any resource* * Service profiles are now supported for external authorities * `linkerd routes --open-api` flag generates a service profile based on an OpenAPI specification (swagger) file * `linkerd routes` command displays per-route stats for services with service profiles * Add `--ha` flag to `linkerd install` command, for HA deployment of the control plane * Update stat command to accept multiple stat targets * Fix authority stat filtering when the `--from` flag is present * Various improvements to check command, including: * Emit warnings instead of errors when not running the latest version * Add retries if control plane health check fails initially * Run all pre-install RBAC checks, instead of stopping at first failure * Fixed an issue with the `--registry` install flag not accepting hosts with ports * Added an `--output` stat flag, for printing stats as JSON * Updated the `top` table to set column widths dynamically * Added a `--single-namespace` install flag for installing the control plane with Role permissions instead of ClusterRole permissions * Added a `--proxy-auto-inject` flag to the `install` command, allowing for auto-injection of sidecar containers * Added `--proxy-cpu` and `--proxy-memory` flags to the `install` and `inject` commands, giving the ability to configure CPU + Memory requests * Added a `--context` flag to specify the context to use to talk to the Kubernetes apiserver * The namespace in which Linkerd is installed is configurable via the `LINKERD_NAMESPACE` env var, in addition to the `--linkerd-namespace` flag * The wait time for the `check` and `dashboard` commands is configurable via the `--wait` flag * The `top` command now aggregates by HTTP method as well * Controller * Rename snake case fields to camel case in service profile spec * Controller components are now prefixed with `linkerd-` to prevent name collisions with existing resources * `linkerd install --disable-h2-upgrade` flag has been added to control automatic HTTP/2 upgrading * Fix auto injection issue on Kubernetes `v1.9.11` that would merge, rather than append, the proxy container into the application * Fixed a few issues with auto injection via the proxy-injector webhook: * Injected pods now execute the linkerd-init container last, to avoid rerouting requests during pod init * Original pod labels and annotations are preserved when auto-injecting * CLI health check now uses unified endpoint for data plane checks * Include Licence files in all Docker images * Proxy * The proxy's `tap` subsystem has been reimplemented to be more efficient and and reliable * The proxy now supports route metadata in tap queries and events * A potential HTTP/2 window starvation bug has been fixed * Prometheus counters now wrap properly for values greater than 2^53 * Add controller client metrics, scoped under `control_` * Canonicalize outbound names via DNS for inbound profiles * Fix routing issue when a pod makes a request to itself * Only include `classification` label on `response_total` metric * Remove panic when failing to get remote address * Better logging in TCP connect error messages * Web UI * Top routes page, served at `/routes` * Route metrics are now available in the resource detail pages for services with configured profiles * Service profiles can be created and downloaded from the Web UI * Top Routes page, served at `/routes` * Fixed a smattering of small UI issues * Added a new Grafana dashboard for authorities * Revamped look and feel of the Linkerd dashboard by switching component libraries from antd to material-ui * Added a Help section in the sidebar containing useful links * Tap and Top pages * Added clear button to query form * Resource Detail pages * Limit number of resources shown in the graph * Resource Detail page * Better rendering of the dependency graph at the top of the page * Unmeshed sources are now populated in the Inbound traffic table * Sources and destinations are aligned in the popover * Tap and Top pages * Additional validation and polish for the form controls * The top table clears older results when a new top call is started * The top table now aggregates by HTTP method as well ## edge-18.12.2 Upgrade notes: The control plane components have been renamed as of the edge-18.12.1 release to reduce possible naming collisions. To upgrade an older installation, see the [Upgrade Guide](https://linkerd.io/2/upgrade/). * Controller * Rename snake case fields to camel case in service profile spec ## edge-18.12.1 Upgrade notes: The control plane components have been renamed in this release to reduce possible naming collisions. To upgrade an existing installation: * Install new CLI: `curl https://run.linkerd.io/install-edge | sh` * Install new control plane: `linkerd install | kubectl apply -f -` * Remove old deploys/cms: `kubectl -n linkerd get deploy,cm -oname | grep -v linkerd | xargs kubectl -n linkerd delete` * Re-inject your applications: `linkerd inject my-app.yml | kubectl apply -f -` * Remove old services: `kubectl -n linkerd get svc -oname | grep -v linkerd | xargs kubectl -n linkerd delete` For more information, see the [Upgrade Guide](https://linkerd.io/2/upgrade/). * CLI * **Improved** `linkerd routes` command displays per-route stats for *any resource*! * **New** Service profiles are now supported for external authorities! * **New** `linkerd routes --open-api` flag generates a service profile based on an OpenAPI specification (swagger) file * Web UI * **New** Top routes page, served at `/routes` * **New** Route metrics are now available in the resource detail pages for services with configured profiles * **New** Service profiles can be created and downloaded from the Web UI * Controller * **Improved** Controller components are now prefixed with `linkerd-` to prevent name collisions with existing resources * **New** `linkerd install --disable-h2-upgrade` flag has been added to control automatic HTTP/2 upgrading * Proxy * **Improved** The proxy's `tap` subsystem has been reimplemented to be more efficient and and reliable * The proxy now supports route metadata in tap queries and events * **Fixed** A potential HTTP/2 window starvation bug has been fixed * **Fixed** Prometheus counters now wrap properly for values greater than 2^53 (thanks, @lucab!) ## edge-18.11.3 * CLI * **New** `linkerd routes` command displays per-route stats for services with service profiles * **Experimental** Add `--ha` flag to `linkerd install` command, for HA deployment of the control plane (thanks @benjdlambert!) * Web UI * **Experimental** Top Routes page, served at `/routes` * Controller * **Fixed** Fix auto injection issue on Kubernetes `v1.9.11` that would merge, rather than append, the proxy container into the application * Proxy * **Improved** Add controller client metrics, scoped under `control_` * **Improved** Canonicalize outbound names via DNS for inbound profiles ## edge-18.11.2 * CLI * **Improved** Update stat command to accept multiple stat targets * **Fixed** Fix authority stat filtering when the `--from` flag is present * Various improvements to check command, including: * Emit warnings instead of errors when not running the latest version * Add retries if control plane health check fails initially * Run all pre-install RBAC checks, instead of stopping at first failure * Proxy / Proxy-Init * **Fixed** Fix routing issue when a pod makes a request to itself (#1585) * Only include `classification` label on `response_total` metric ## edge-18.11.1 * Proxy * **Fixed** Remove panic when failing to get remote address * **Improved** Better logging in TCP connect error messages * Web UI * **Improved** Fixed a smattering of small UI issues ## edge-18.10.4 This release includes a major redesign of the web frontend to make use of the Material design system. Additional features that leverage the new design are coming soon! This release also includes the following changes: * CLI * **Fixed** Fixed an issue with the `--registry` install flag not accepting hosts with ports (thanks, @alenkacz!) * Web UI * **New** Added a new Grafana dashboard for authorities (thanks, @alpeb!) * **New** Revamped look and feel of the Linkerd dashboard by switching component libraries from antd to material-ui ## edge-18.10.3 * CLI * **New** Added an `--output` stat flag, for printing stats as JSON * **Improved** Updated the `top` table to set column widths dynamically * **Experimental** Added a `--single-namespace` install flag for installing the control plane with Role permissions instead of ClusterRole permissions * Controller * Fixed a few issues with auto injection via the proxy-injector webhook: * Injected pods now execute the linkerd-init container last, to avoid rerouting requests during pod init * Original pod labels and annotations are preserved when auto-injecting * Web UI * **New** Added a Help section in the sidebar containing useful links ## edge-18.10.2 This release brings major improvements to the CLI as described below, including support for auto-injecting deployments via a Kubernetes Admission Controller. Proxy auto-injection is **experimental**, and the implementation may change going forward. * CLI * **New** Added a `--proxy-auto-inject` flag to the `install` command, allowing for auto-injection of sidecar containers (Thanks @ihcsim!) * **Improved** Added `--proxy-cpu` and `--proxy-memory` flags to the `install` and `inject` commands, giving the ability to configure CPU + Memory requests (Thanks @benjdlambert!) * **Improved** Added a `--context` flag to specify the context to use to talk to the Kubernetes apiserver (Thanks @ffd2subroutine!) ## edge-18.10.1 * Web UI * **Improved** Tap and Top pages * Added clear button to query form * **Improved** Resource Detail pages * Limit number of resources shown in the graph * Controller * CLI health check now uses unified endpoint for data plane checks * Include Licence files in all Docker images Special thanks to @alenkacz for contributing to this release! ## edge-18.9.3 * Web UI * **Improved** Resource Detail page * Better rendering of the dependency graph at the top of the page * Unmeshed sources are now populated in the Inbound traffic table * Sources and destinations are aligned in the popover * **Improved** Tap and Top pages * Additional validation and polish for the form controls * The top table clears older results when a new top call is started * The top table now aggregates by HTTP method as well * CLI * **New** The namespace in which Linkerd is installed is configurable via the `LINKERD_NAMESPACE` env var, in addition to the `--linkerd-namespace` flag * **New** The wait time for the `check` and `dashboard` commands is configurable via the `--wait` flag * **Improved** The `top` command now aggregates by HTTP method as well Special thanks to @rochacon, @fahrradflucht and @alenkacz for contributing to this release! ## stable-2.0.0 ## edge-18.9.2 * **New** _edge_ and _stable_ release channels * Web UI * **Improved** Tap & Top UIs with better layout and linking * CLI * **Improved** `check --pre` command verifies the caller has sufficient permissions to install Linkerd * **Improved** `check` command verifies that Prometheus has data for proxied pods * Proxy * **Fix** `hyper` crate dependency corrects HTTP/1.0 Keep-Alive behavior ## v18.9.1 * Web UI * **New** Default landing page provides namespace overview with expandable sections * **New** Breadcrumb navigation at the top of the dashboard * **Improved** Tap and Top pages * Table rendering performance improvements via throttling * Tables now link to resource detail pages * Tap an entire namespace when no resource is specified * Tap websocket errors provide more descriptive text * Consolidated source and destination columns * Misc ui updates * Metrics tables now include a small success rate chart * Improved latency formatting for seconds latencies * Renamed upstream/downstream to inbound/outbound * Sidebar scrolls independently from main panel, scrollbars hidden when not needed * Removed social links from sidebar * CLI * **New** `linkerd check` now validates Linkerd proxy versions and readiness * **New** `linkerd inject` now provides an injection status report, and warns when resources are not injectable * **New** `linkerd top` now has a `--hide-sources` flag, to hide the source column and collapse top results accordingly * Control Plane * Updated Prometheus to v2.4.0, Grafana to 5.2.4 ## v18.8.4 * Web UI * **Improved** Tap and Top now have a better sampling rate * **Fixed** Missing sidebar headings now appear ## v18.8.3 * Web UI * **Improved** Kubernetes resource navigation in the sidebar * **Improved** resource detail pages: * **New** live request view * **New** success rate graphs * CLI * `tap` and `top` have been improved to sample up to 100 RPS * Control plane * Injected proxy containers now have readiness and liveness probes enabled Special thanks to @sourishkrout for contributing a web readability fix! ## v18.8.2 * CLI * **New** `linkerd top` command has been added, displays live traffic stats * `linkerd check` has been updated with additional checks, now supports a `--pre` flag for running pre-install checks * `linkerd check` and `linkerd dashboard` now support a `--wait` flag that tells the CLI to wait for the control plane to become ready * `linkerd tap` now supports a `--output` flag to display output in a wide format that includes src and dst resources and namespaces * `linkerd stat` includes additional validation for command line inputs * All commands that talk to the Linkerd API now show better error messages when the control plane is unavailable * Web UI * **New** individual resources can now be viewed on a resource detail page, which includes stats for the resource itself and its nearest neighbors * **Experimental** web-based Top interface accessible at `/top`, aggregates tap data in real time to display live traffic stats * The `/tap` page has multiple improvements, including displaying additional src/dst metadata, improved form controls, and better latency formatting * All resource tables have been updated to display meshed pod counts, as well as an icon linking to the resource's Grafana dashboard if it is meshed * The UI now shows more useful information when server errors are encountered * Proxy * The `h2` crate fixed a HTTP/2 window management bug * The `rustls` crate fixed a bug that could improperly fail TLS streams * Control Plane * The tap server now hydrates metadata for both sources and destinations ## v18.8.1 * Web UI * **New** Tap UI makes it possible to query & inspect requests from the browser! * Proxy * **New** Automatic, transparent HTTP/2 multiplexing of HTTP/1 traffic reduces the cost of short-lived HTTP/1 connections * Control Plane * **Improved** `linkerd inject` now supports injecting all resources in a folder * **Fixed** `linkerd tap` no longer crashes when there are many pods * **New** Prometheus now only scrapes proxies belonging to its own linkerd install * **Fixed** Prometheus metrics collection for clusters with >100 pods Special thanks to @ihcsim for contributing the `inject` improvement! ## v18.7.3 Linkerd2 v18.7.3 completes the rebranding from Conduit to Linkerd2, and improves overall performance and stability. * Proxy * **Improved** CPU utilization by ~20% * Web UI * **Experimental** `/tap` page now supports additional filters * Control Plane * Updated all k8s.io dependencies to 1.11.1 ## v18.7.2 Linkerd2 v18.7.2 introduces new stability features as we work toward production readiness. * Control Plane * **Breaking change** Injected pod labels have been renamed to be more consistent with Kubernetes; previously injected pods must be re-injected with new version of linkerd CLI in order to work with updated control plane * The "ca-bundle-distributor" deployment has been renamed to "ca" * Proxy * **Fixed** HTTP/1.1 connections were not properly reused, leading to elevated latencies and CPU load * **Fixed** The `process_cpu_seconds_total` was calculated incorrectly * Web UI * **New** per-namespace application topology graph * **Experimental** web-based Tap interface accessible at `/tap` * Updated favicon to the Linkerd logo ## v18.7.1 Linkerd2 v18.7.1 is the first release of the Linkerd2 project, which was formerly hosted at github.com/runconduit/conduit. * Packaging * Introduce new date-based versioning scheme, `vYY.M.n` * Move all Docker images to `gcr.io/linkerd-io` repo * User Interface * Update branding to reference Linkerd throughout * The CLI is now called `linkerd` * Production Readiness * Fix issue with destination service sending back incomplete pod metadata * Fix high CPU usage during proxy shutdown * ClusterRoles are now unique per Linkerd install, allowing multiple instances to be installed in the same Kubernetes cluster ## v0.5.0 Conduit v0.5.0 introduces a new, experimental feature that automatically enables Transport Layer Security between Conduit proxies to secure application traffic. It also adds support for HTTP protocol upgrades, so applications that use WebSockets can now benefit from Conduit. * Security * **New** `conduit install --tls=optional` enables automatic, opportunistic TLS. See [the docs][auto-tls] for more info. * Production Readiness * The proxy now transparently supports HTTP protocol upgrades to support, for instance, WebSockets. * The proxy now seamlessly forwards HTTP `CONNECT` streams. * Controller services are now configured with liveness and readiness probes. * User Interface * `conduit stat` now supports a virtual `authority` resource that aggregates traffic by the `:authority` (or `Host`) header of an HTTP request. * `dashboard`, `stat`, and `tap` have been updated to describe TLS state for traffic. * `conduit tap` now has more detailed information, including the direction of each message (outbound or inbound). * `conduit stat` now more-accurately records histograms for low-latency services. * `conduit dashboard` now includes error messages when a Conduit-enabled pod fails. * Internals * Prometheus has been upgraded to v2.3.1. * A potential live-lock has been fixed in HTTP/2 servers. * `conduit tap` could crash due to a null-pointer access. This has been fixed. [auto-tls]: docs/automatic-tls.md ## v0.4.4 Conduit v0.4.4 continues to improve production suitability and sets up internals for the upcoming v0.5.0 release. * Production Readiness * The destination service has been mostly-rewritten to improve safety and correctness, especially during controller initialization. * Readiness and Liveness checks have been added for some controller components. * RBAC settings have been expanded so that Prometheus can access node-level metrics. * User Interface * Ad blockers like uBlock prevented the Conduit dashboard from fetching API data. This has been fixed. * The UI now highlights pods that have failed to start a proxy. * Internals * Various dependency upgrades, including Rust 1.26.2. * TLS testing continues to bear fruit, precipitating stability improvements to dependencies like Rustls. Special thanks to @alenkacz for improving docker build times! ## v0.4.3 Conduit v0.4.3 continues progress towards production readiness. It features a new latency-aware load balancer. * Production Readiness * The proxy now uses a latency-aware load balancer for outbound requests. This implementation is based on Finagle's Peak-EWMA balancer, which has been proven to significantly reduce tail latencies. This is the same load balancing strategy used by Linkerd. * User Interface * `conduit stat` is now slightly more predictable in the way it outputs things, especially for commands like `watch conduit stat all --all-namespaces`. * Failed and completed pods are no longer shown in stat summary results. * Internals * The proxy now supports some TLS configuration, though these features remain disabled and undocumented pending further testing and instrumentation. Special thanks to @ihcsim for contributing his first PR to the project and to @roanta for discussing the Peak-EWMA load balancing algorithm with us. ## v0.4.2 Conduit v0.4.2 is a major step towards production readiness. It features a wide array of fixes and improvements for long-running proxies, and several new telemetry features. It also lays the groundwork for upcoming releases that introduce mutual TLS everywhere. * Production Readiness * The proxy now drops metrics that do not update for 10 minutes, preventing unbounded memory growth for long-running processes. * The proxy now constrains the number of services that a node can route to simultaneously (default: 100). This protects long-running proxies from consuming unbounded resources by tearing down the longest-idle clients when the capacity is reached. * The proxy now properly honors HTTP/2 request cancellation. * The proxy could incorrectly handle requests in the face of some connection errors. This has been fixed. * The proxy now honors DNS TTLs. * `conduit inject` now works with `statefulset` resources. * Telemetry * **New** `conduit stat` now supports the `all` Kubernetes resource, which shows traffic stats for all Kubernetes resources in a namespace. * **New** the Conduit web UI has been reorganized to provide namespace overviews. * **Fix** a bug in Tap that prevented the proxy from simultaneously satisfying more than one Tap request. * **Fix** a bug that could prevent stats from being reported for some TCP streams in failure conditions. * The proxy now measures response latency as time-to-first-byte. * Internals * The proxy now supports user-friendly time values (e.g. `10s`) from environment configuration. * The control plane now uses client for Kubernetes 1.10.2. * Much richer proxy debug logging, including socket and stream metadata. * The proxy internals have been changed substantially in preparation for TLS support. Special thanks to @carllhw, @kichristensen, & @sfroment for contributing to this release! ### Upgrading from v0.4.1 When upgrading from v0.4.1, we suggest that the control plane be upgraded to v0.4.2 before injecting application pods to use v0.4.2 proxies. ## v0.4.1 Conduit 0.4.1 builds on the telemetry work from 0.4.0, providing rich, Kubernetes-aware observability and debugging. * Web UI * **New** Automatically-configured Grafana dashboards for Services, Pods, ReplicationControllers, and Conduit mesh health. * **New** `conduit dashboard` Pod and ReplicationController views. * Command-line interface * **Breaking change** `conduit tap` now operates on most Kubernetes resources. * `conduit stat` and `conduit tap` now both support kubectl-style resource strings (`deploy`, `deploy/web`, and `deploy web`), specifically: * `namespaces` * `deployments` * `replicationcontrollers` * `services` * `pods` * Telemetry * **New** Tap support for filtering by and exporting destination metadata. Now you can sample requests from A to B, where A and B are any resource or group of resources. * **New** TCP-level stats, including connection counts and durations, and throughput, wired through to Grafana dashboards. * Service Discovery * The proxy now uses the [trust-dns] DNS resolver. This fixes a number of DNS correctness issues. * The destination service could sometimes return incorrect, stale, labels for an endpoint. This has been fixed! [trust-dns]: https://github.com/bluejekyll/trust-dns ## v0.4.0 Conduit 0.4.0 overhauls Conduit's telemetry system and improves service discovery reliability. * Web UI * **New** automatically-configured Grafana dashboards for all Deployments. * Command-line interface * `conduit stat` has been completely rewritten to accept arguments like `kubectl get`. The `--to` and `--from` filters can be used to filter traffic by destination and source, respectively. `conduit stat` currently can operate on `Namespace` and `Deployment` Kubernetes resources. More resource types will be added in the next release! * Proxy (data plane) * **New** Prometheus-formatted metrics are now exposed on `:4191/metrics`, including rich destination labeling for outbound HTTP requests. The proxy no longer pushes metrics to the control plane. * The proxy now handles `SIGINT` or `SIGTERM`, gracefully draining requests until all are complete or `SIGQUIT` is received. * SMTP and MySQL (ports 25 and 3306) are now treated as opaque TCP by default. You should no longer have to specify `--skip-outbound-ports` to communicate with such services. * When the proxy reconnected to the controller, it could continue to send requests to old endpoints. Now, when the proxy reconnects to the controller, it properly removes invalid endpoints. * A bug impacting some HTTP/2 reset scenarios has been fixed. * Service Discovery * Previously, the proxy failed to resolve some domain names that could be misinterpreted as a Kubernetes Service name. This has been fixed by extending the _Destination_ API with a negative acknowledgement response. * Control Plane * The _Telemetry_ service and associated APIs have been removed. * Documentation * Updated [Roadmap](doc/roadmap.md) Special thanks to @ahume, @alenkacz, & @xiaods for contributing to this release! ### Upgrading from v0.3.1 When upgrading from v0.3.1, it's important to upgrade proxies before upgrading the controller. As you upgrade proxies, the controller will lose visibility into some data plane stats. Once all proxies are updated, `conduit install |kubectl apply -f -` can be run to upgrade the controller without causing any data plane disruptions. Once the controller has been restarted, traffic stats should become available. ## v0.3.1 Conduit 0.3.1 improves Conduit's resilience and transparency. * Proxy (data plane) * The proxy now makes fewer changes to requests and responses being proxied. In particular, requests and responses without bodies or with empty bodies are better supported. * HTTP/1 requests with different `Host` header fields are no longer sent on the same HTTP/1 connection even when those hostnames resolve to the same IP address. * A connection leak during proxying of non-HTTP TCP connections was fixed. * The proxy now handles unavailable services more gracefully by timing out while waiting for an endpoint to become available for the service. * Command-line interface * `$KUBECONFIG` with multiple paths is now supported. (PR #482 by @hypnoglow). * `conduit check` now checks for the availability of a Conduit update. (PR #460 by @ahume). * Service Discovery * Kubernetes services with type `ExternalName` are now supported. * Control Plane * The proxy is injected into the control plane during installation to improve the control plane's resilience and to "dogfood" the proxy. * The control plane is now more resilient regarding networking failures. * Documentation * The markdown source for the documentation published at is now open source at ## v0.3.0 Conduit 0.3 focused heavily on production hardening of Conduit's telemetry system. Conduit 0.3 should "just work" for most apps on Kubernetes 1.8 or 1.9 without configuration, and should support Kubernetes clusters with hundreds of services, thousands of instances, and hundreds of RPS per instance. With this release, Conduit also moves from _experimental_ to _alpha_---meaning that we're ready for some serious testing and vetting from you. As part of this, we've published the [Conduit roadmap](https://conduit.io/roadmap/), and we've also launched some new mailing lists: [conduit-users](https://groups.google.com/forum/#!forum/conduit-users), [conduit-dev](https://groups.google.com/forum/#!forum/conduit-dev), and [conduit-announce](https://groups.google.com/forum/#!forum/conduit-announce). * CLI * CLI commands no longer depend on `kubectl` * `conduit dashboard` now runs on an ephemeral port, removing port 8001 conflicts * `conduit inject` now skips pods with `hostNetwork=true` * CLI commands now have friendlier error messages, and support a `--verbose` flag for debugging * Web UI * All displayed metrics are now instantaneous snapshots rather than aggregated over 10 minutes * The sidebar can now be collapsed * UX refinements and bug fixes * Conduit proxy (data plane) * Proxy does load-aware (P2C + least-loaded) L7 balancing for HTTP * Proxy can now route to external DNS names * Proxy now properly sheds load in some pathological cases when it cannot route * Telemetry system * Many optimizations and refinements to support scale goals * Per-path and per-pod metrics have been removed temporarily to improve scalability and stability; they will be reintroduced in Conduit 0.4 (#405) * Build improvements * The Conduit docker images are now much smaller. * Dockerfiles have been changed to leverage caching, improving build times substantially Known Issues: * Some DNS lookups to external domains fail (#62, #155, #392) * Applications that use WebSockets, HTTP tunneling/proxying, or protocols such as MySQL and SMTP, require additional configuration (#339) ## v0.2.0 This is a big milestone! With this release, Conduit adds support for HTTP/1.x and raw TCP traffic, meaning it should "just work" for most applications that are running on Kubernetes without additional configuration. * Data plane * Conduit now transparently proxies all TCP traffic, including HTTP/1.x and HTTP/2. (See caveats below.) * Command-line interface * Improved error handling for the `tap` command * `tap` also now works with HTTP/1.x traffic * Dashboard * Minor UI appearance tweaks * Deployments now searchable from the dashboard sidebar Caveats: * Conduit will automatically work for most protocols. However, applications that use WebSockets, HTTP tunneling/proxying, or protocols such as MySQL and SMTP, will require some additional configuration. See the [documentation](https://conduit.io/adding-your-service/#protocol-support) for details. * Conduit doesn't yet support external DNS lookups. These will be addressed in an upcoming release. * There are known issues with Conduit's telemetry pipeline that prevent it from scaling beyond a few nodes. These will be addressed in an upcoming release. * Conduit is still in alpha! Please help us by [filing issues and contributing pull requests](https://github.com/runconduit/conduit/issues/new). ## v0.1.3 * This is a minor bugfix for some web dashboard UI elements that were not rendering correctly. ## v0.1.2 Conduit 0.1.2 continues down the path of increasing usability and improving debugging and introspection of the service mesh itself. * Conduit CLI * New `conduit check` command reports on the health of your Conduit installation. * New `conduit completion` command provides shell completion. * Dashboard * Added per-path metrics to the deployment detail pages. * Added animations to line graphs indicating server activity. * More descriptive CSS variable names. (Thanks @natemurthy!) * A variety of other minor UI bugfixes and improvements * Fixes * Fixed Prometheus config when using RBAC. (Thanks @FaKod!) * Fixed `tap` failure when pods do not belong to a deployment. (Thanks @FaKod!) ## v0.1.1 Conduit 0.1.1 is focused on making it easier to get started with Conduit. * Conduit can now be installed on Kubernetes clusters that use RBAC. * The `conduit inject` command now supports a `--skip-outbound-ports` flag that directs Conduit to bypass proxying for specific outbound ports, making Conduit easier to use with non-gRPC or HTTP/2 protocols. * The `conduit tap` command output has been reformatted to be line-oriented, making it easier to parse with common UNIX command line utilities. * Conduit now supports routing of non-fully qualified domain names. * The web UI has improved support for large deployments and deployments that don't have any inbound/outbound traffic. ## v0.1.0 Conduit 0.1.0 is the first public release of Conduit. * This release supports services that communicate via gRPC only. non-gRPC HTTP/2 services should work. More complete HTTP support, including HTTP/1.0 and HTTP/1.1 and non-gRPC HTTP/2, will be added in an upcoming release. * Kubernetes 1.8.0 or later is required. * kubectl 1.8.0 or later is required. `conduit dashboard` will not work with earlier versions of kubectl. * When deploying to Minikube, Minikube 0.23 or 0.24.1 or later are required. Earlier versions will not work. * This release has been tested using Google Kubernetes Engine and Minikube. Upcoming releases will be tested on additional providers too. * Configuration settings and protocols are not stable yet. * Services written in Go must use grpc-go 1.3 or later to avoid [grpc-go bug #1120](https://github.com/grpc/grpc-go/issues/1120).