# OpenTelemetry Collector internal observability

The [Internal telemetry] page on OpenTelemetry's website contains the
documentation for the Collector's internal observability, including:

- Which types of observability are emitted by the Collector.
- How to enable and configure these signals.
- How to use this telemetry to monitor your Collector instance.

If you need to troubleshoot the Collector, see [Troubleshooting].

Read on to learn about experimental features and the project's overall vision
for internal telemetry.

<!-- toc -->

- [Goals of internal telemetry](#goals-of-internal-telemetry)
  * [Observable elements](#observable-elements)
  * [Impact](#impact)
  * [Configurable level of observability](#configurable-level-of-observability)
  * [Internal telemetry properties](#internal-telemetry-properties)
    + [Units](#units)
    + [Process for defining new metrics](#process-for-defining-new-metrics)
- [Experimental trace telemetry](#experimental-trace-telemetry)

<!-- tocstop -->

## Goals of internal telemetry

The Collector's internal telemetry is an important part of fulfilling
OpenTelemetry's [project vision](vision.md). The following section explains the
priorities for making the Collector an observable service.

### Observable elements

The following aspects of the Collector need to be observable.

- [Current values]
  - Some of the current values and rates might be calculated as derivatives of
    cumulative values in the backend, so it's an open question whether to expose
    them separately or not.
- [Cumulative values]
- [Trace or log events]
  - For start or stop events, an appropriate hysteresis must be defined to avoid
    generating too many events. Note that start and stop events can't be
    detected in the backend simply as derivatives of current rates. The events
    include additional data that is not present in the current value.
- [Host metrics]
  - Host metrics can help users determine if the observed problem in a service
    is caused by a different process on the same host.

### Impact

The impact of these observability improvements on the core performance of the
Collector must be assessed.

### Configurable level of observability

Some metrics and traces can be high volume and users might not always want to
observe them. An observability verbosity “level” allows configuration of the
Collector to send more or less observability data or with even finer
granularity, to allow turning on or off specific metrics.

The default level of observability must be defined in a way that has
insignificant performance impact on the service.

### Internal telemetry properties

Telemetry produced by the Collector has the following properties:

- metrics produced by Collector components use the prefix `otelcol_`
- metrics produced by any instrumentation library used by Collector components will *not* be prefixed with `otelcol_`
- code is instrumented using the OpenTelemetry API for metrics, and traces. Logs are instrumented using zap. Telemetry is collected and produced via the OpenTelemetry Go SDK
- instrumentation scope defaults to the package name of the component recording telemetry. It can be configured
  via the `scope_name` option in mdatagen, but the recommendation is to keep the default
- metrics are defined via `metadata.yaml` except in components that have specific cases where
  it is not possible to do so. See the [issue](https://github.com/open-telemetry/opentelemetry-collector-contrib/issues/33523)
  which list such components
- whenever possible, components should leverage core components or helper libraries to capture
  telemetry, ensuring that all components of the Collector can be consistently observed
- telemetry produced by components should include attributes that identify specific instances
  of the components

#### Units

The following units should be used for metrics emitted by the Collector
for the purpose of its internal telemetry:

| Field type                                                                 | Unit           |
| -------------------------------------------------------------------------- | -------------- |
| Metric counting the number of log records received, processed, or exported | `{records}`    |
| Metric counting the number of spans received, processed, or exported       | `{spans}`      |
| Metric counting the number of data points received, processed, or exported | `{datapoints}` |

#### Process for defining new metrics

Metrics in the Collector are defined via `metadata.yaml`, which is used by [mdatagen] to
produce:

- code to create metric instruments that can be used by components
- documentation for internal metrics
- a consistent prefix for all internal metrics
- convenience accessors for meter and tracer
- a consistent instrumentation scope for components
- test methods for validating the telemetry

The process to generate new metrics is to configure them via
`metadata.yaml`, and run `go generate` on the component.

## Experimental trace telemetry

The Collector does not expose traces by default, but can be configured.
The Collector's internal telemetry uses OpenTelemetry SDK.

The following configuration can be used in combination with the aforementioned
feature gates to emit internal metrics and traces from the Collector to an OTLP
backend:

```yaml
service:
  telemetry:
    metrics:
      readers:
        - periodic:
            interval: 5000
            exporter:
              otlp:
                protocol: grpc/protobuf
                endpoint: https://backend:4317
    traces:
      processors:
        - batch:
            exporter:
              otlp:
                protocol: grpc/protobuf
                endpoint: https://backend2:4317
```

See the [example configuration][kitchen-sink] for additional options.

> This configuration does not support emitting logs as there is no support for
> [logs] in the OpenTelemetry Go SDK at this time.

You can also configure the Collector to send its own traces using the OTLP
exporter. Send the traces to an OTLP server running on the same Collector, so it
goes through configured pipelines. For example:

```yaml
service:
  telemetry:
    traces:
      processors:
        batch:
          exporter:
            otlp:
              protocol: grpc/protobuf
              endpoint: ${MY_POD_IP}:4317
```

[Internal telemetry]:
  https://opentelemetry.io/docs/collector/internal-telemetry/
[Troubleshooting]: https://opentelemetry.io/docs/collector/troubleshooting/
[issue7532]:
  https://github.com/open-telemetry/opentelemetry-collector/issues/7532
[issue7454]:
  https://github.com/open-telemetry/opentelemetry-collector/issues/7454
[logs]: https://github.com/open-telemetry/opentelemetry-go/issues/3827
[OpenTelemetry Configuration]:
  https://github.com/open-telemetry/opentelemetry-configuration
[kitchen-sink]:
  https://github.com/open-telemetry/opentelemetry-configuration/blob/main/examples/kitchen-sink.yaml
[Current values]:
  https://opentelemetry.io/docs/collector/internal-telemetry/#summary-of-values-observable-with-internal-metrics
[Cumulative values]:
  https://opentelemetry.io/docs/collector/internal-telemetry/#summary-of-values-observable-with-internal-metrics
[Trace or log events]:
  https://opentelemetry.io/docs/collector/internal-telemetry/#events-observable-with-internal-logs
[Host metrics]:
  https://opentelemetry.io/docs/collector/internal-telemetry/#lists-of-internal-metrics
[mdatagen]:
  https://github.com/open-telemetry/opentelemetry-collector/tree/main/cmd/mdatagen