Use `Default()` instead of re-loading containers.conf.
Also rework how the containers.conf objects are handled for parsing the
CLI. Previously, we were conflating "loading the defaults" with
"storing values from the CLI" with "libpod may further change fields"
which ultimately led to various bugs and test failues.
To address the issue, separate the defaults from the values from the CLI
and properly name the fields to make the semantics less ambiguous.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: containers/common/issues/1200
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When shutting down the image engine we always wait for the image
even goroutine to finish writing any outstanding events. However,
the loop for that always waits 100msec every iteration. This means
that (depending on the phase) shutdown is always delayed up to 100msec.
This is delaying "podman run" extra much because podman is run twice
(once for the run and once as cleanup via a conmon callback).
Changing the image loop to exit immediately when a libimageEventsShutdown
(but first checking for any outstanding events to write) improves podman
run times by about 100msec on average.
Note: We can't just block on the event loop reading the shutdown event
anymore, we need to wait until it read and processed any outstanding
events, so we now send the shutdown event and then block waiting for the
channel to be closed by the event loop.
[NO NEW TESTS NEEDED]
Signed-off-by: Alexander Larsson <alexl@redhat.com>
We added the concept of image volumes in 2.2.0, to support
inspecting an image from within a container. However, this is a
strictly read-only mount, with no modification allowed.
By contrast, the new `image` volume driver creates a c/storage
container as its underlying storage, so we have a read/write
layer. This, in and of itself, is not especially interesting, but
what it will enable in the future is. If we add a new command to
allow these image volumes to be committed, we can now distribute
volumes - and changes to them - via a standard OCI image registry
(which is rather new and quite exciting).
Future work in this area:
- Add support for `podman volume push` (commit volume changes and
push resulting image to OCI registry).
- Add support for `podman volume pull` (currently, we require
that the image a volume is created from be already pulled; it
would be simpler if we had a dedicated command that did the
pull and made a volume from it)
- Add support for scratch images (make an empty image on demand
to use as the base of the volume)
- Add UOR support to `podman volume push` and
`podman volume pull` to enable both with non-image volume
drivers
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The current code only sets EventsLogFilePath when the tmp is overwritten
from the db. We should always set the default when no path was set in
containers.conf.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman --events-backend file events --stream=false should never hang. The
problem is that our tail library will wait for the file to be created
which makes sense when we do not run with --stream=false. To fix this we
can just always create the file when the logger is initialized. This
would also help to report errors early on in case the file is not
accessible.
Fixes part one from #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Also, do a general cleanup of all the timeout code. Changes
include:
- Convert from int to *uint where possible. Timeouts cannot be
negative, hence the uint change; and a timeout of 0 is valid,
so we need a new way to detect that the user set a timeout
(hence, pointer).
- Change name in the database to avoid conflicts between new data
type and old one. This will cause timeouts set with 4.2.0 to be
lost, but considering nobody is using the feature at present
(and the lack of validation means we could have invalid,
negative timeouts in the DB) this feels safe.
- Ensure volume plugin timeouts can only be used with volumes
created using a plugin. Timeouts on the local driver are
nonsensical.
- Remove the existing test, as it did not use a volume plugin.
Write a new test that does.
The actual plumbing of the containers.conf timeout in is one line
in volume_api.go; the remainder are the above-described cleanups.
Signed-off-by: Matthew Heon <mheon@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
add an option to configure the driver timeout when creating a volume.
The default is 5 seconds but this value is too small for some custom drivers.
Signed-off-by: cdoern <cdoern@redhat.com>
make the error clearer and state that images created by other tools
might not be visible to Podman when it overrides the graph driver.
Closes: https://github.com/containers/podman/issues/13970
[NO NEW TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Firstly, reset is now managed by the runtime itself as a part of
initialization. This ensures that it can be used even with
runtimes that would otherwise fail to be created - most notably,
when the user has changed a core path
(runroot/root/tmpdir/staticdir).
Secondly, we now attempt a best-effort removal even if the store
completely fails to be configured.
Third, we now hold the alive lock for the entire reset operation.
This ensures that no other Podman process can start while we are
running a system reset, and removes any possibility of a race
where a user tries to create containers or pull images while we
are trying to perform a reset.
[NO NEW TESTS NEEDED] we do not test reset last I checked.
Fixes#9075
Signed-off-by: Matthew Heon <mheon@redhat.com>
Mostly, just removing the comments. These either have been done,
or are no longer a good idea.
No code changes. [NO NEW TESTS NEEDED] as such.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Simplify the work-queue implementation by using a wait group. Once all
queued work items are done, the channel can be closed.
The system tests revealed a flake (i.e., #14351) which indicated that
the service container does not always get stopped which suggests a race
condition when queuing items. Those items are queued in a goroutine to
prevent potential dead locks if the queue ever filled up too quickly.
The race condition in question is that if a work item queues another,
the goroutine for queuing may not be scheduled fast enough and the
runtime shuts down; it seems to happen fairly easily on the slow CI
machines. The wait group fixes this race and allows for simplifying
the code.
Also increase the queue's buffer size to 10 to make things slightly
faster.
[NO NEW TESTS NEEDED] as we are fixing a flake.
Fixes: #14351
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Create an auto-update event for each invocation, independent if images
and containers are updated or not. Those events will be indicated in
the events already but users will now know why.
Fixes: #14283
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Code is not directly reading XDG_RUNTIME_DIR, it is reading a value in
the state that may initially be from XDG_RUNTIME_DIR, but then is
overriden by a value from the boltdb that podman stores some state in.
XDG_RUNTIME_DIR and the RunRoot path may not have the same value, so
complaining about XDG_RUNTIME_DIR here may cause confusion when trying
to debug things.
[NO TESTS NEEDED]
Signed-off-by: Kevin Downey <hiredman@thelastcitadel.com>
Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* systemctl stop podman.service will now return exit code 0
* Update test framework to support JSON boolean and numeric values
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This primarily served to protect us against shutting down the
Libpod runtime while operations (like creating a container) were
happening. However, it was very inconsistently implemented (a lot
of our longer-lived functions, like pulling images, just didn't
implement it at all...) and I'm not sure how much we really care
about this very-specific error case?
Removing it also removes a lot of potential deadlocks, which is
nice.
[NO NEW TESTS NEEDED]
Signed-off-by: Matthew Heon <mheon@redhat.com>
move the check after the cgroup manager is set, so to correctly detect
--cgroup-manager=cgroupfs and do not raise a warning about dbus not
being present.
Closes: https://github.com/containers/podman/issues/12802
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Create a custom writer which logs the netavark output to logrus. This
will log to the syslog when it is enabled.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
To make testing easier we can overwrite the network backend with the
global `--network-backend` option.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
You can change the network backendend in containers.conf supported
values are "cni" and "netavark".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
commit 6b3b0a17c6 introduced a check for
the PID file before attempting to move the PID to a new scope.
This is still vulnerable to TOCTOU race condition though, since the
PID file or the PID can be removed/killed after the check was
successful but before it was used.
Closes: https://github.com/containers/podman/issues/12065
[NO NEW TESTS NEEDED] it fixes a CI flake
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The current implementation of the CNI network interface only loads the
networks on the first call and saves them in a map. This is done to safe
performance and not having to reload all configs every time which will be
costly for many networks.
The problem with this approach is that if a network is created by
another process it will not be picked up by the already running podman
process. This is not a problem for the short lived podman commands but
it is problematic for the podman service.
To make sure we always have the actual networks store the mtime of the
config directory. If it changed since the last read we have to read
again.
Fixes#11828
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new function to libpod to directly access the runtime
configuration without creating an expensive deep copy. Further migrate
a number of callers to this new function.
This drops the number of calls to JSONDeepCopy from 4 to 1 in a simple
`podman run --rm -d busybox top`.
Future work: Please note that there are more callers of GetConfig() that
can me migrated to GetConfigNoCopy().
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
make sure the pause process is moved to its own scope as well as what
we do when we join an existing user+mount namespace.
Closes: https://github.com/containers/podman/issues/11560
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The rootless integration tests show the XDG_RUNTIME_DIR warning without
any reasons. Podman runs without problems in these and yet the warning
is shown. I think the problem is that we check the permission before we
create the runroot directory.
[NO TESTS NEEDED]
Fixes#11521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not be exposing the store outside of Libpod. We want to
encapsulate it as an internal implementation detail - there's no
reason functions outside of Libpod should directly be
manipulating container storage. Convert the last use to invoke a
method on Libpod instead, and remove the function.
[NO TESTS NEEDED] as this is just a refactor.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Pull the trigger on the `pkg/registries` package which acted as a proxy
for `c/image/pkg/sysregistriesv2`. Callers should be using the packages
from c/image directly, if needed at all.
Also make use of libimage's SystemContext() method which returns a copy
of a system context, further reducing the risk of unintentionally
altering global data.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman does not need to watch the cni config directory. If a network is
not found in the cache, OCICNI will reload the networks anyway and thus
even podman system service should work as expected.
Also include a change to not mount a "new" /var by default in the
rootless cni ns, instead try to use /var/lib/cni first and then the
parent dir. This allows users to store cni configs under /var/... which
is the case for the CI compose test.
[NO TESTS NEEDED]
Fixes#10686
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Users are complaining about read/only /var/tmp failing
even if TMPDIR=/tmp is set.
This PR Fixes: https://github.com/containers/podman/issues/10698
[NO TESTS NEEDED] No way to test this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I believe moving the conmon probing code to c/common wasn't the best strategy.
Different container engines have different requrements of which conmon version is required
(based on what flags they use).
Signed-off-by: Peter Hunt <pehunt@redhat.com>
We originally added this in the *very early* days of Podman,
before a proper persistent state was written, so we had something
to test with. It was retained after the original SQLite state
(and current BoltDB state) were written so it could be used for
testing Libpod in unit tests with no requirement for on-disk
storage. Well, such unit tests never materialized, and if we were
to write some now the requirement to have a temporary directory
for storing data on disk is not that bad. I can basically
guarantee there are no users of this in the wild because, even if
you managed to figure out how to configure it when we don't
document it, it's completely unusable with Podman since all your
containers and pods will disappear every time Podman exits.
Given all this, and since it's an ongoing maintenance burden I no
longer wish to deal with, let's just remove it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently the debug line shows every runtime up until it finds
the correct one, confusing users on which runtime it is using.
Also move missing OCI runtime from containers/conf down to Debug level
and improved the debug message, to not report error.
[NO TESTS NEEDED] Since this is just debug.
Triggered by https://github.com/containers/podman/issues/4854
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
There was a potential race where two handlers could be added at
the same time. Go Maps are not thread-safe, so that could do
unpleasant things. Add a mutex to keep things safe.
Also, swap the order or Register and Start for the handlers in
Libpod runtime created. As written, there was a small gap between
Start and Register where SIGTERM/SIGINT would be completely
ignored, instead of stopping Podman. Swapping the two closes this
gap.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Installing a duplicate shutdown handler fails, but if a handler
with the same name is already present, we should be set to go.
There's no reason to print a user-facing error about it.
This comes up almost nowhere because Podman never makes more than
one Libpod runtime, but there is one exception (`system reset`)
and the error messages, while harmless, were making people very
confused (we got several bug reports that `system reset` was
nonfunctional).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Our users are missing certain warning messages that would
make debugging issues with Podman easier.
For example if you do a podman build with a Containerfile
that contains the SHELL directive, the Derective is silently
ignored.
If you run with the log-level warn you get a warning message explainging
what happened.
$ podman build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
--> 7a207be102a
7a207be102aa8993eceb32802e6ceb9d2603ceed9dee0fee341df63e6300882e
$ podman --log-level=warn build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
WARN[0000] SHELL is not supported for OCI image format, [/bin/bash -c] will be ignored. Must use `docker` format
--> 7bd96fd25b9
7bd96fd25b9f755d8a045e31187e406cf889dcf3799357ec906e90767613e95f
These messages will no longer be lost, when we default to WARNing level.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Previously, we always computed pause path from the Rootless
runtime directory. Problem: this does not match the behavior of
Libpod when the directory changes. Libpod will continue to use
the previous directory, cached in the database; Pause pidfiles
will swap to the new path. This is problematic when the directory
needs to exist to write the pidfile, and Libpod is what creates
the directory.
There are two potential solutions - allow the pause pidfile to
move and just make the directory when we want to write it, or use
the cached Libpod paths for a guaranteed location. This patch
does the second, because it seems safer - we will never miss a
previously-existing pidfile because the location is now
consistent.
Fixes#8539
Signed-off-by: Matthew Heon <mheon@redhat.com>
Say I start a container with the flag
`--runtime /usr/local/sbin/crun`. I then stop the container, and
restart it without the flag. We previously stored the runtime in
use by a container only by basename when given a path, so the
container only knows that it's using the `crun` OCI runtime - and
on being restarted without the flag, it will use the system crun,
not my special crun build.
Using the full path as the name in these cases ensures we will
still use the correct runtime, even on subsequent runs of Podman.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This allows us to run both the Libpod and Server handlers at the
same time without unregistering one.
Also, pass the signal that killed us into the handlers, in case
they want to use it to determine what to do (e.g. what exit code
to set).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Expand the use of the Shutdown package such that we now use it
to handle signals any time we run Libpod. From there, add code to
container creation to use the Inhibit function to prevent a
shutdown from occuring during the critical parts of container
creation.
We also need to turn off signal handling when --sig-proxy is
invoked - we don't want to catch the signals ourselves then, but
instead to forward them into the container via the existing
sig-proxy handler.
Fixes#7941
Signed-off-by: Matthew Heon <mheon@redhat.com>
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like
fails, the error message already contains the file name and the
operation that fails, so there is no need to wrap the error with
something like "open %s failed".
While at it
- replace a few places with os.Open, ioutil.ReadAll with
ioutil.ReadFile.
- replace errors.Wrapf with errors.Wrap for cases where there
are no %-style arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If the first time you run podman in a user account you do a
su - USER, and the second time, you run as the logged in USER
podman fails, because it is not handling the tmpdir definition
in the database. This PR fixes this problem.
vendor containers/common v0.11.1
This should fix a couple of issues we have seen in podman 1.9.1
with handling of libpod.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Daniel J Walsh
Valentin Rothberg
Alexander Larsson
Matthew Heon
Paul Holzinger
Doug Rabson
Matthew Heon
Giuseppe Scrivano
openshift-ci[bot]
Sascha Grunert
Erik Sjölund
cdoern
Kevin Downey
Jhon Honce
Valentin Rothberg
OpenShift Merge Robot
flouthoc
Ashley Cui
Peter Hunt
Paul Holzinger
Kir Kolyshkin
Qi Wang
Brent Baude
José Guilherme Vanz