Users are complaining about read/only /var/tmp failing
even if TMPDIR=/tmp is set.
This PR Fixes: https://github.com/containers/podman/issues/10698
[NO TESTS NEEDED] No way to test this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I believe moving the conmon probing code to c/common wasn't the best strategy.
Different container engines have different requrements of which conmon version is required
(based on what flags they use).
Signed-off-by: Peter Hunt <pehunt@redhat.com>
We originally added this in the *very early* days of Podman,
before a proper persistent state was written, so we had something
to test with. It was retained after the original SQLite state
(and current BoltDB state) were written so it could be used for
testing Libpod in unit tests with no requirement for on-disk
storage. Well, such unit tests never materialized, and if we were
to write some now the requirement to have a temporary directory
for storing data on disk is not that bad. I can basically
guarantee there are no users of this in the wild because, even if
you managed to figure out how to configure it when we don't
document it, it's completely unusable with Podman since all your
containers and pods will disappear every time Podman exits.
Given all this, and since it's an ongoing maintenance burden I no
longer wish to deal with, let's just remove it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently the debug line shows every runtime up until it finds
the correct one, confusing users on which runtime it is using.
Also move missing OCI runtime from containers/conf down to Debug level
and improved the debug message, to not report error.
[NO TESTS NEEDED] Since this is just debug.
Triggered by https://github.com/containers/podman/issues/4854
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
There was a potential race where two handlers could be added at
the same time. Go Maps are not thread-safe, so that could do
unpleasant things. Add a mutex to keep things safe.
Also, swap the order or Register and Start for the handlers in
Libpod runtime created. As written, there was a small gap between
Start and Register where SIGTERM/SIGINT would be completely
ignored, instead of stopping Podman. Swapping the two closes this
gap.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Installing a duplicate shutdown handler fails, but if a handler
with the same name is already present, we should be set to go.
There's no reason to print a user-facing error about it.
This comes up almost nowhere because Podman never makes more than
one Libpod runtime, but there is one exception (`system reset`)
and the error messages, while harmless, were making people very
confused (we got several bug reports that `system reset` was
nonfunctional).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Our users are missing certain warning messages that would
make debugging issues with Podman easier.
For example if you do a podman build with a Containerfile
that contains the SHELL directive, the Derective is silently
ignored.
If you run with the log-level warn you get a warning message explainging
what happened.
$ podman build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
--> 7a207be102a
7a207be102aa8993eceb32802e6ceb9d2603ceed9dee0fee341df63e6300882e
$ podman --log-level=warn build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
WARN[0000] SHELL is not supported for OCI image format, [/bin/bash -c] will be ignored. Must use `docker` format
--> 7bd96fd25b9
7bd96fd25b9f755d8a045e31187e406cf889dcf3799357ec906e90767613e95f
These messages will no longer be lost, when we default to WARNing level.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Previously, we always computed pause path from the Rootless
runtime directory. Problem: this does not match the behavior of
Libpod when the directory changes. Libpod will continue to use
the previous directory, cached in the database; Pause pidfiles
will swap to the new path. This is problematic when the directory
needs to exist to write the pidfile, and Libpod is what creates
the directory.
There are two potential solutions - allow the pause pidfile to
move and just make the directory when we want to write it, or use
the cached Libpod paths for a guaranteed location. This patch
does the second, because it seems safer - we will never miss a
previously-existing pidfile because the location is now
consistent.
Fixes#8539
Signed-off-by: Matthew Heon <mheon@redhat.com>
Say I start a container with the flag
`--runtime /usr/local/sbin/crun`. I then stop the container, and
restart it without the flag. We previously stored the runtime in
use by a container only by basename when given a path, so the
container only knows that it's using the `crun` OCI runtime - and
on being restarted without the flag, it will use the system crun,
not my special crun build.
Using the full path as the name in these cases ensures we will
still use the correct runtime, even on subsequent runs of Podman.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This allows us to run both the Libpod and Server handlers at the
same time without unregistering one.
Also, pass the signal that killed us into the handlers, in case
they want to use it to determine what to do (e.g. what exit code
to set).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Expand the use of the Shutdown package such that we now use it
to handle signals any time we run Libpod. From there, add code to
container creation to use the Inhibit function to prevent a
shutdown from occuring during the critical parts of container
creation.
We also need to turn off signal handling when --sig-proxy is
invoked - we don't want to catch the signals ourselves then, but
instead to forward them into the container via the existing
sig-proxy handler.
Fixes#7941
Signed-off-by: Matthew Heon <mheon@redhat.com>
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
In case os.Open[File], os.Mkdir[All], ioutil.ReadFile and the like
fails, the error message already contains the file name and the
operation that fails, so there is no need to wrap the error with
something like "open %s failed".
While at it
- replace a few places with os.Open, ioutil.ReadAll with
ioutil.ReadFile.
- replace errors.Wrapf with errors.Wrap for cases where there
are no %-style arguments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If the first time you run podman in a user account you do a
su - USER, and the second time, you run as the logged in USER
podman fails, because it is not handling the tmpdir definition
in the database. This PR fixes this problem.
vendor containers/common v0.11.1
This should fix a couple of issues we have seen in podman 1.9.1
with handling of libpod.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Updates the podman info command to show registries from v1 config file
in the search table format.
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
After a restart, pods and containers both run a refresh()
function to prepare to run after a reboot. Until now, volumes
have not had a similar function, because they had no per-boot
setup to perform.
Unfortunately, this was not noticed when in-memory locking was
introduced to volumes. The refresh() routine is, among other
things, responsible for ensuring that locks are reserved after a
reboot, ensuring they cannot be taken by a freshly-created
container, pod, or volume. If this reservation is not done, we
can end up with two objects using the same lock, potentially
needing to lock each other for some operations - classic recipe
for deadlocks.
Add a refresh() function to volumes to perform lock reservation
and ensure it is called as part of overall refresh().
Fixes#4605Fixes#4621
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If a user upgrades to a machine that defaults to a cgroups V2 machine
and has a libpod.conf file in their homedir that defaults to OCI Runtime runc,
then we want to change it one time to crun.
runc as of this point does not work on cgroupV2 systems. This patch will
eventually be removed but is needed until runc has support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If c/storage paths are explicitly set to "" (the empty string) it
will use compiled-in defaults. However, it won't tell us this via
`storage.GetDefaultStoreOptions()` - we just get the empty string
(which can put our defaults, some of which are relative to
c/storage, in a bad spot).
Hardcode a sane default for cases like this. Furthermore, add
some sanity checks to paths, to ensure we don't use relative
paths for core parts of libpod.
Fixes#3952
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
when creating the default libpod.conf file, be sure the default OCI
runtime is cherry picked from the system configuration.
Closes: https://github.com/containers/libpod/issues/3781
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we should be looking for the libpod.conf file in /usr/share/containers
and not in /usr/local. packages of podman should drop the default
libpod.conf in /usr/share. the override remains /etc/containers/ as
well.
Fixes: #3702
Signed-off-by: baude <bbaude@redhat.com>
The `$PATH` environment variable will now used as fallback if no valid
runtime or conmon path matches. The debug logs has been updated to state
the used executable.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
NixOS links the current system state to `/run/current-system`, so we
have to add these paths to the configuration files as well to work out
of the box.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
When a command (like `ps`) requests no store be created, but also
requires a refresh be performed, we have to ignore its request
and initialize the store anyways to prevent segfaults. This work
was done in #3532, but that missed one thing - initializing a
storage service. Without the storage service, Podman will still
segfault. Fix that oversight here.
Fixes#3625
Signed-off-by: Matthew Heon <mheon@redhat.com>
some podman commands do not require the use of a container/image store.
in those cases, it is more effecient to not open the store, because that
results in having to also close the store which can be costly when the
system is under heavy write I/O loads.
Signed-off-by: baude <bbaude@redhat.com>
at least on Fedora 30 it creates the /run/user/UID directory for the
user logged in via ssh.
This needs to be done very early so that every other check when we
create the default configuration file will point to the correct
location.
Closes: https://github.com/containers/libpod/issues/3410
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had a regression where the rootless user tried to use the global
configuration file. We should not try to use the global configuration
when running in rootless but only cherry-pick some settings from there
when creating the file for the first time.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Conmon has moved out of cri-o and into it's own dedicated repository.
This commit updates configuration and definitions which referenced
the old cri-o based paths.
Signed-off-by: Chris Evich <cevich@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
We may want to ship configurations including more than one
runtime configuration - for example, crun and runc and kata, all
configured. However, we don't want to make these extra runtimes
hard requirements, so let's not fatally error when we can't find
their executables.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we report cgroupmanager default as systemd, even if the user modified
the libpod.conf. Also cgroupmanager does not work in rootless mode. This
PR correctly identifies the default cgroup manager or reports it is not supported.
Also add homeDir to correctly get the homedir if the $HOME is not set. Will
attempt to get Homedir out of /etc/passwd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- PREFIX is now passed saved in the binary at build-time so that default
paths match installation paths.
- ETCDIR is also overridable in a similar way.
- DESTDIR is now applied on top of PREFIX for install/uninstall steps.
Previously, a DESTDIR=/foo PREFIX=/bar make would install into /bar,
rather than /foo/bar.
Signed-off-by: Lawrence Chan <element103@gmail.com>
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
once the default event logger was removed from libpod.conf, we need to
set the default based on whether the systemd build tag is used or not.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We merged #2950 with some nits still remaining, as Giuseppe was
going on PTO. This addresses those small requested changes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
create immediately a namespace if we need a refresh. This is
necessary to access the rootless storage.
Closes: https://github.com/containers/libpod/issues/2894
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
split the generation for the default storage.conf and when we write it
if not existing for a rootless user.
This is necessary because during the startup we might be overriding
the default configuration through --storage-driver and --storage-opt,
that would not be written down to the storage.conf file we generated.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the settings are available in the user config file, do not override
them with the global configuration.
Closes: https://github.com/containers/libpod/issues/2614
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had two functions NewRuntimeFromConfig and NewRuntime that differed
only for the config file they use.
Move comon logic to newRuntimeFromConfig and let it lookup the
configuration file to use when one is not specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we use "podman info" to reconfigure the runtime after a reboot, but we
don't propagate the error message back if something goes wrong.
Closes: https://github.com/containers/libpod/issues/2584
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When the configuration file is specified, be sure to fill rootless
compatible values in the default configuration.
Closes: https://github.com/containers/libpod/issues/2510
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
No reason to do it in util/ anymore. It's always going to be a
subdirectory of c/storage graph root by default, so we can just
set it after the return.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Instead of passing in defaults via WithStorageConfig after
computing them in cmd/podman/libpodruntime, do all defaults in
libpod itself.
This can alleviate ordering issues which caused settings in the
libpod config (most notably, volume path) to be ignored.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If this doesn't match, we end up not being able to access named
volumes mounted into containers, which is bad. Use the same
validation that we use for other critical paths to ensure this
one also matches.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We want named volumes to be created in a subdirectory of the
c/storage graph root, the same as the libpod root directory is
now. As such, we need to adjust its location when the graph root
changes location.
Also, make a change to how we set the default. There's no need to
explicitly set it every time we initialize via an option - that
might conflict with WithStorageConfig setting it based on graph
root changes. Instead, just initialize it in the default config
like our other settings.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Daniel J Walsh
Valentin Rothberg
Matthew Heon
Ashley Cui
Giuseppe Scrivano
Peter Hunt
OpenShift Merge Robot
Matthew Heon
Paul Holzinger
Kir Kolyshkin
Qi Wang
Brent Baude
José Guilherme Vanz
Nalin Dahyabhai
Miloslav Trmač
Sascha Grunert
TomSweeneyRedHat
Chris Evich
Marco Vedovati
Jamie Bliss
Lawrence Chan