When generating a kube yaml with kube generate, do not
set the hostPort in the pod spec if the service flag is
set and we are generating a service kind too.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* add tests
* add documentation for --shm-size-systemd
* add support for both pod and standalone run
Signed-off-by: danishprakash <danish.prakash@suse.com>
Add a podman ulimit annotation to kube generate and play.
If a container has a container with ulimits set, kube gen
will add those as an annotation to the generated yaml.
If kube play encounters the ulimit annotation, it will set
ulimits for the container being played.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Remove the container in ExecStop to make sure that Quadlet's adheres to
Podman's customizable stop signal/timeout. Certain programs ignore
SIGTERM which renders the services generated by Quadlet less user
friendly compared to the ones from podman-generate-systemd.
Previously, `systemctl stop` would just hang until systemd's stop
timeout is hit. Since `podman rm` also removes the CID file, the
additional `rm` can be removed. Note that `podman rm` will return
immediately if the specified CID file isn't present.
I am working on a short tutorial on Quadlet and hit the issue with a
simple container running `sleep`. `sleep` ignores SIGTERM and stopping
the service would take forever even with `PodmanArgs=--stop-timeout=0`.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Install the signal proxy before attaching to/starting the container to
make sure there's no race-condition as revealed in the failing start/run
tests in #16901. The tests had the valid expectation that signal
forwarding works once the container is running.
Further update the tests to account for the attach test where the
expectation is that signal forwarding works once Podman has attached to
container (or even before).
Fixes: #16901
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Signed-off-by: Ed Santiago <santiago@redhat.com>
Commit 4fa307f149 fixed a number of issues in the sdnotify proxies.
Whenever a container runs with a custom sdnotify policy, the proxies
need to keep running which in turn required Podman to run and wait for
the service container to stop. Improve on that behavior and set the
service container as the main PID (instead of Podman) when no container
needs sdnotify.
Fixes: #17345
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Primarily, add skip_if_journald_unavailable because RHEL.
Secondarily, reverse a flipped actual/expect assertion
that made it difficult to understand the RHEL failure.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We currently name the container being created during kube play
as ctrName-podName, but this is not how it is done in k8s.
Since we can't change this at the CLI level as it will be a breaking
change (it will be planned for podman 5.0), add only ctrName as an alias
to the network of the pod.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Also includes unreleased https://github.com/openshift/imagebuilder/pull/246 to work
with the updated docker/docker dependency.
And updates some references to newly deprecated docker/docker symbols.
[NO NEW TESTS NEEDED]
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
- podman-remote unshare returns an error message
with the exit code '125'.
- Need to run RestartRemoteService() to apply
changes to the TMPDIR.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Commit 2f29639bd3 added a UX improvement to cleanup/teardown when
running the specified YAML has failed. However, the teardown happens
unconditionally such that rerunning the same YAML file will teardown the
previously created workload instead of just failing with a name-conflict
error (e.g., "pod already exists"). The regression popped up testing
the Ansible system role with Podman v4.4.0.
For now, do not teardown at all on error to quickly fix this regression
for the upcoming Podman v4.4.1 release. The UX improvement is still
desired but must be conditional and only happen on newly created
resources, which probably requires moving it down to the backend.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The new version contains the ginkgolinter, which makes sure the
assertions are more helpful.
Also replace the deprecated os.SEEK_END with io.SeekEnd.
There is also a new `musttag` linter which checks if struct that are
un/marshalled all have json tags. This results in many warnings so I
disabled the check for now. We can reenable it if we think it is worth
it but for now it way to much work to fix all report problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Quadlet should not exit with failure if no files to process have been
found. Otherwise, even simple operations such as reloading systemd
will fail as it retriggers generators.
Fixes: #17374
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Similarly to the ICMP test for IPv4, I broke the command line on a
rebase of the initial test import.
Note that, unless we pass an IPv6 resolver directly to pasta, Podman
won't add one to /etc/resolv.conf in the container. We could pass
that explicitly, but then end up hitting the same issue as the one
described in the "Local forwarder, IPv6" case. Skip this test for
the moment being.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Parameter substitution in the command line went lost on some rebase
of the initial test import. Add it back and actually test that we can
ping the resolver.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason I couldn't figure out yet, on CI systems running
Fedora 37, tests for TCP port forwarding with ranges fail on the
third connection, as connect() from the socat client gets
interrupted -- and socat doesn't handle this.
Mitigate this by connecting twice, to two different ports, instead of
using three ports.
Reported-by: Ed Santiago <santiago@redhat.com>
Link: https://github.com/containers/podman/issues/17287
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add support for disabeling SELinux process separation in the container.
Add support for setting the process type of the container.
Add support for setting the process MCS level of the container.
Add support for setting the file type of the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
copy the current mapping into a new user namespace, and run into a
separate user namespace.
Closes: https://github.com/containers/podman/issues/17337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Just like buildkit buildah must allow cleaning the buildcache and cache generated on host by --mount=type=cache just like buildkit's prune command.
See: https://github.com/moby/buildkit#cache
Signed-off-by: Aditya R <arajan@redhat.com>
In the remote environment, this test will be failed,
because an error message is different from the local environment.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
quadlet tests were using 'systemctl show -P', a shortcut
that doesn't exist on RHEL8. Translate to old-systemd
language.
And, minor tweaks to make future test diagnosing easier.
This is a frontport of #17311; bringing from release branch
to main. Except that was an emergency, so it was a one-line
fix. This is a better long-term fix, not as trivial to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
http.Get() could not recognize no_proxy with "ginkgo -nodes <any>".
Therefore, we set http.Client not to use a proxy instead of os.Setenv().
Fixes#17135
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Ha ha. This was supposed to be a trivial little followup to #17174:
https://github.com/containers/podman/pull/17174#discussion_r1085963780
(safer username check when --userns=keep-id)
It got complicated. TL;DR we need to use User.Username, not User.Name.
The latter is GECOS! Tests were working because, on Fedora, GECOS
for root is "root". Found and fixed all 'u.Name' instances, but
if there are any references with a variable other than 'u', they
still need looking into.
Signed-off-by: Ed Santiago <santiago@redhat.com>
- ImageCacheDir is hard-coded as "/tmp/podman/imagecachedir".
To avoid this hard-coding, I changed it to "os.TempDir()/imagecachedir".
- Change ImageCacheDir permissions from 0777 to 0700.
This directory should be used by per-user.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Add test to verify that updates without a pids-limit specified no longer
overwrite the previous value.
Also fixes erroneous warning generated by remote clients:
"Resource limits are not supported and ignored on cgroups V1 rootless
systems"
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
(podman push) and (podman manifest push) now support --sign-by-sigstore=param-file,
using the containers-sigstore-signing-params.yaml(5) file format.
That notably adds support for Fulcio and Rekor signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If rootless, os.RemoveAll() is failed due to permission denied.
Therefore, we use "podman unshare rm" instead of os.RemoveAll().
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
We had a number of references, mostly in docs, to the word master that
can now be changed to main. This PR does that and makes the project a
bit more inclusive.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
containers/podman/pull/17186 and containers/podman/pull/17201 have been
merged at roughly the same time. Both work fine in isolation but the
new kube test breaks in combination.
Fix the IPC kube test to make CI healthy.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
- Use filepath.Join(podmanTest.TempDir, "any") instead of "/tmp/any"
- Add generatePolicyFile() to avoid the hardcording of "keyPath": "tmp/key.gpg"
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
The Device, Type, Copy and Options keys are now supported in
quadlet .volume files. This allows users to create filesystem
based volumes with quadlets .volume files.
Signed-off-by: Ingo Becker <ingo@orgizm.net>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Drop support for remote use-cases when `.containerignore` or
`.dockerignore` is a symlink pointing to arbitrary location on host.
Signed-off-by: Aditya R <arajan@redhat.com>
The test was added in commit 1424f0958f, it can flake because the
attach test needs the message in the log. On slow CI systems this can
take longer. Add a retry logic which checks the container log every
second for up to 5 seconds. That should be plenty of time.
Fixes#17204
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If the image being used has a user set that is a positive
integer greater than 0, then set the securityContext.runAsNonRoot
to true for the container in the generated kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
After https://github.com/containers/netavark/pull/452 `netavark` is
incharge of deciding `custom_dns_servers` if any so lets honor that and
libpod should not set these manually.
This also ensures docker parity
Podman populates container's `/etc/resolv.conf` with custom DNS servers ( specified via `--dns` or `dns_server` in containers.conf )
even when container is connected to a network where `dns_enabled` is `true`.
Current behavior does not matches with docker, hence following commit ensures that podman only populates custom DNS server when container is not connected to any network where DNS is enabled and for the cases where `dns_enabled` is `true`
the resolution for custom DNS server will happen via ( `aardvark-dns` or `dnsname` ).
Reference: https://docs.docker.com/config/containers/container-networking/#dns-services
Closes: containers#16172
Signed-off-by: Aditya R <arajan@redhat.com>
`default` is already used as network mode, i.e. podman run --network
default will choose the default mode not a network named `default`.
We already block names from other network modes, default was forgotten.
Fixes#17169
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Output from podman system service, on system tests, is
being saved... it just hasn't been collected as an artifact.
Start collecting it. And, remove obsolete-unused-misleading
code that made me think it _was_ being collected.
Also: log system-service output for bud tests, and set
log-level to info per suggestion from @Luap99
Signed-off-by: Ed Santiago <santiago@redhat.com>
July 2022: test was flaking on new VM images. We needed new
images, so I filed #15014 and skipped the test.
January 2023: no attention from anyone, so I'll try bumping up
a dd timeout from 10s to 30s. But in the interim, the test
has broken: it used to expect "Containerfile" in output (this
was deliberately added in #13655)... but #16810 changed that
so Containerfile no longer appears. @flouthoc argues that
this too is deliberate (#17059). Okay, so let's change the
test then. All I care about is not adding more regressions.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Reserved annotations are used internally by Podman and would effect
nothing when run with Kubernetes so we should not be generating these
annotations.
Fixes: https://github.com/containers/podman/issues/17105
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Unify the functions used to detect rootless to "isRootless()".
This function can detect to join the user namespace by mistake.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
...and instrument with 'podman ps'es for debugging failures.
Test flakes pretty regularly in Fedora gating. If the increased
timeout doesn't help, at least we should be able to see if the
container is stopping or failed or something.
Signed-off-by: Ed Santiago <santiago@redhat.com>
to not give a false sense of security since these are not a security
mechanism but a hook to run arbitrary code before executing a
command.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Until Podman v4.3, privileged rootfull containers would expose all the
host devices to the container while rootless ones would exclude
`/dev/ptmx` and `/dev/tty*`.
When 5a2405ae1b ("Don't mount /dev/tty* inside privileged containers
running systemd") landed, rootfull containers started excluding all the
`/dev/tty*` devices when the container would be running in systemd
mode, reducing the disparity between rootless and rootfull containers
when running in this mode.
However, this commit regressed some legitimate use cases: exposing
non-virtual-terminal tty devices (modems, arduinos, serial
consoles, ...) to the container, and the regression was addressed in
f4c81b0aa5 ("Only prevent VTs to be mounted inside privileged
systemd containers").
This now calls into question why all tty devices were historically
prevented from being shared to the rootless non-privileged containers.
A look at the podman git history reveals that the code was introduced
as part of ba430bfe5e ("podman v2 remove bloat v2"), and obviously
was copy-pasted from some other code I couldn't find.
In any case, we can easily guess that this check was put for the same
reason 5a2405ae1b was introduced: to prevent breaking the host
environment's consoles. This also means that excluding *all* tty
devices is overbearing, and should instead be limited to just virtual
terminals like we do on the rootfull path.
This is what this commit does, thus making the rootless codepath behave
like the rootfull one when in systemd mode.
This leaves `/dev/ptmx` as the main difference between the two
codepath. Based on the blog post from the then-runC maintainer[1] and
this Red Hat bug[2], I believe that this is intentional and a needed
difference for the rootless path.
Closes: #16925
Suggested-by: Fabian Holler <mail@fholler.de>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
[1]: https://www.cyphar.com/blog/post/20160627-rootless-containers-with-runc
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=501718
Increase the loop range from 5 to 20 to make sure we give the service
enough time to transition to inactive. Other tests have the same range
with 0.5 seconds sleeps, so I expect the new value to be sufficient and
consistent.
Fixes: #17093
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the specs of containers generated by `kube play` are
correctly completed. They have not before which surfaced in default
environment variables not being set.
Fixes: #17016
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The StoppedByUser variable indicates that the container was
requested to stop by a user. It's used to prevent restart policy
from firing (so that a restart=always container won't restart if
the user does a `podman stop`. The problem is we were setting it
*very* late in the stop() function. Originally, this was fine,
but after the changes to add the new Stopping state, the logic
that triggered restart policy was firing before StoppedByUser was
even set - so the container would still restart.
Setting it earlier shouldn't hurt anything and guarantees that
checks will see that the container was stopped manually.
Fixes#17069
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The kube-play test file was a rat's nest of long complicated
yaml strings all differing only slightly. Clean it up, by
adding a helper function with optional parameters. The
helper is ugly, but the actual test code (the important
stuff) is cleaner.
Signed-off-by: Ed Santiago <santiago@redhat.com>
While manually playing with --service-container, I encountered a number
of too verbose logs. For instance, there's no need to error-log when
the service-container has already been stopped.
For testing, add a new kube test with a multi-pod YAML which will
implicitly show that #17024 is now working.
Fixes: #17024
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Move the handling of Publish key to a method
use --publish instead of -p
Use the new method for both .container and .kube files
Adjust .container tests
Add .kube tests
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
- When SELinux is enabled, a storage root directory
should be labeled with a specific value.
- `stop podman.service` test changes a storage root directory,
therefore we need to cleanup a container with --root option.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
While mounting virtual console devices in a systemd container is a
recipe for disaster (I experienced it first hand), mounting serial
console devices, modems, and others should still be done by default
for privileged systemd-based containers.
v2, addressing the review from @fho:
- use backticks in the regular expression to remove backslashes
- pre-compile the regex at the package level
- drop IsVirtualTerminalDevice (not needed for a one-liner)
v3, addressing the review from @fho and @rhatdan:
- re-introduce a private function for matching the device names
- use path.Match rather than a regex not to slow down startup time
Closes#16925.
Fixes: 5a2405ae1b ("Don't mount /dev/tty* inside privileged...")
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
When SELinux is enabled, e2e test could be failed
due to run a ls command in a running container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Much as we'd love to eat our dogfood, podman.io is not hosted
on reliable infrastructure; redhat.com is. Let's see if this
gets rid of CI flakes.
Closes: #17044
Signed-off-by: Ed Santiago <santiago@redhat.com>
If the run errors, cobra does not execute post runs. It is a somehow
known issue (https://github.com/spf13/cobra/issues/914) but problematic
for Podmand as the runtime is shutdown during post run.
Since some commands overwrite the post run and a general lack in cobra
of post runs on errors, move the shutting down the engines directly into
Execute. Fixing the issue may fix a number of flakes.
Note that the shutdowns are NOPs for the remote client.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
follow-up to 6886e80b45
when "podman -rm -f" is used on a container in "stopping" state, also
make sure it is terminated before removing it from the local storage.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if /sys is bind mounted from the host then also add an explicit mount
for /sys/fs/cgroup so that 'ro' is honored.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Do not allow for removing the service container unless all associated
pods have been removed. Previously, the service container could be
removed when all pods have exited which can lead to a number of issues.
Now, the service container is treated like an infra container and can
only be removed along with the pods.
Also make sure that a pod is unlinked from the service container once
it's being removed.
Fixes: #16964
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add a new flag --publish
Remote - Pass PublishPorts as a string array
ABI - translate the string array to Ports and merge with the ports in the spec
Add e2e tests
Add option to man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Red Hat registry is too unreliable. (As of this writing
in January 2023, quay.io is not much better, but this is
a new flake. Ubi has been flaking for a year or more).
Instead of UBI, use the new systemd-image added to system tests
in #16814. Since this reduces the number of cached images,
a few unrelated tests (image count) need to be tweaked.
And, sigh, Fedora systemd colorizes boot messages by default,
causing a failure where we don't see an expected Reached Target
message. I don't want to rely on ASCII formatting codes, so
I've updated the build-systemd-image script so it disables
systemd colors, and have built a new systemd-image:20230106.
Made a few small usability improvements to the script as well.
Closes: #16695
Signed-off-by: Ed Santiago <santiago@redhat.com>
When you use podman logs with --until and --follow it should exit after
the requested until time and not keep hanging forever.
This fixes the behavior for the k8s-file backend.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When you use podman logs with --until and --follow it should exit after
the requested until time and not keep hanging forever.
To make this work I reworked the code to use the better journald event
reading code for logs as well. this correctly uses the sd_journal API
without having to compare the cursors to find the EOF.
The same problems exists for the k8s-file driver, I will fix this in the
next commit.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The `containerCouldBeLogging` bool should not be false by default, when
--since is used we seek in the journal and can miss the start event so
that bool would stay false forever. This means that a running container
is not followed even when it should.
To fix this we can just set the `containerCouldBeLogging` bool based on
the current contianer state.
Fixes#16950
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
do not allow removing containers that are in the stopping state,
otherwise it can lead to a race condition where a "podman rm" removes
the container from the storage while another process is stopping the
same container.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2155828
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When SELinux is running in enforcing mode,
this test needs to add an suffix :Z to the volume mount.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
This change aims to store an error message to the ContainerState struct
with the last known error from the Start, StartAndAttach, and Stop OCI
Runtime functions.
The goal was to act in accordance with Docker's behavior.
Fixes: #13729
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Add the new keys to the supported keys list for the Container group
Pass the list of EnvironmentFile values while maintaining the order
Quadlet e2e test framework: Add support for checking regex in Podman args
Add relevant tests
Update man
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Reasoning
---------
When the log-driver is passthrough, the journal socket is passed to the containers as-is which has two advantages:
1. journald can see who the actual sender of the log event is,
rather than thinking everything comes from the conmon process
2. conmon will not have to copy all the log data
Code Changes
------------
If log-driver was not set by the user and service-container is set use
passthrough as the default log-driver
Update the system tests
- explicitly set logdriver in sdnotify and play tests
- podman-kube template test: Verify the default log driver for service-container
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
New tests got added since I've been on PTO. Some of those tests
weren't doing cleanup, resulting in nasty red logs. Fix.
Signed-off-by: Ed Santiago <santiago@redhat.com>
In 'run_podman ? ...', the question mark will _usually_ be
interpreted as a literal question mark, meaning "ignore
exit status". But if there are one or more single-character
filenames in the working directory, such as droppings from
a command such as 'my-test-command > a', Very Bad Things
will happen: the test will fail with an incomprehensible
error message. Prevent that.
Signed-off-by: Ed Santiago <santiago@redhat.com>
...based on f37, not f31. And make it fedora-minimal so it's
smaller. And clean up dnf so it's even smaller. And tag it
with our proper YMD tag, and commit the script that builds it.
This broke the system-df tests. In the process of resolving
that, I found those tests a little lacking. So, improve their
coverage a little bit.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure the Container unit correctly references the volume
Start the Container service and not the Volume one
Remove the volume
Print the name of the service when status does not match
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The test was only waiting for the port to be ready but that doesn't
imply the server being ready to serve requests. Hence, add a loop
waiting for the `info` call to succeed.
Fixes: #16916
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Added the functionality for a user to update the PIDs limit for a
container.
Fixes: #16543
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
podman-remote converts and sends absolute path as context when its an
emptydir by adding additional seperator however it should correctly trim
the path and not add additional seperator for such use cases.
Closes: BZ#2145054
Signed-off-by: Aditya R <arajan@redhat.com>
If you are running temporary containers within podman play kube
we should really be running these in read-only mode. For automotive
they plan on running all of their containers in read-only temporal
mode. Adding this option guarantees that the container image is not
being modified during the running of the container.
The containers can only write to tmpfs mounted directories.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The function grew into a big hairy ball over time and I personally
refrained from touching it as it seemed fragile. Hence, refactor
the function into something more comprehensible and maintainable.
There is still potential for improvement but I want to tackle one
thing at a time.
[NO NEW TESTS NEEDED] as it shouldn't change behavior.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
These just run once and are considered successful at exist. Not much is
needed to support it, but we have to avoid overwriting the type
with Type=notify.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
...make sure podman rejects being called with incompatible options
Replaces: https://github.com/containers/podman/pull/16813
Which is stuck in CI and Ed is on break.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman play kube now supports and has tests for the subpath field when using a hostPath volume type and a configMap volume type.
The hostpath works similarly to the named volume, allowing a user to specify a whole directory but also a specific file or subdir within that mount. Config Maps operate the same way but specifically allow users to mount specific data in a subpath alongside the existing data
resolves#16828
Signed-off-by: Charlie Doern <cbddoern@gmail.com>
This allows use to use STDOUT directly without having to call open
again, also this makes the export API endpoint much more performant
since it no longer needs to copy to a temp file.
I noticed that there was no export API test so I added one.
And lastly opening /dev/stdout will not work on windows.
Fixes#16870
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The ReadOnly and the RunInit keys affect options that have a variable
default (configurable in containers.conf). This means we need to
handle them a bit differently in quadlet to allow overriding the
default. For example, we can't assume ReadOnly=false doesn't need to
add any argument because no argument may mean readonly=true if the default
is changed.
We now don't add any argument (leaving the default) if the key is not specified,
or we always add an argument (--foo or --foo=false) if the key is specified (overriding whatever the default is).
Signed-off-by: Alexander Larsson <alexl@redhat.com>
False is the assumed value, and inspect and podman generate kube are
being cluttered with a ton of annotations that indicate nothing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Support .network file to create a systemd service that runs podman network create
Support networks with .network suffix in Container and Kube to link with Quadlet created networks
Add E2E Tests
Add man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Override the signature policy to always allow pushing images from local
storage, even if the default policy is set up to always disallow reading
images from any location.
Pay attention to the --signature-policy option in `podman push`, so that
we can test this properly.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
This adds basic container and volume system tests for quadlet. These
install and run actual systemd units and ensure they work.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
When we read logs there can be full or partial lines, when it is full we
need to append a newline, thus the message length must be incremented by
one.
Fixes#16856
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In the recent past, I met the frequent need to wait for a container to
exist that, at the same time, may get removed (e.g., system tests in [1]).
Add an `--ignore` option to podman-wait which will ignore errors when a
specified container is missing and mark its exit code as -1. Also
remove ID fields from the WaitReport. It is actually not used by
callers and removing it makes the code simpler and faster.
Once merged, we can go over the tests and simplify them.
[1] github.com/containers/podman/pull/16852
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This changes the podman binary name embedded in the generated files.
This is primarily needed for testing podman.
This also adds a -X config for BINDIR so that we pick up the right
install target. This required tweaking some tests to handle the default
bindir not being /usr/bin.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Also update vendor of containers/storage and image
Cleanup display of added/dropped capabilties as well
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
whenever the podman process is launched, it runs any file found in
these directories:
- /etc/containers/auth-scripts
- /usr/libexec/podman/auth-scripts
The current podman command line is passed as arguments to the
process.
If any of the processes fail, the error is immediately reported back
from podman that exits with the same error code.
[NO NEW TESTS NEEDED] requires a system-wide configuration.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Also fix a number of duplicate words. Yet disable the new `dupword`
linter as it displays too many false positives.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add --ignore flag to the command line
Add a new parameter to the NetworkCreate interface in pkg/domain for CreateOptions
Add a new API Network CreateWithOptions in pkg/bindings
Remote API - Add a query parameter to set the ignore flag
Kube - use the IgnoreIfExists flag when creating the default network instead of handling the failure
Add e2e tests
Update man page for podman-network-create
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Init containers are removed once they exit, but podman
reports and error that the container does not exist, when
it was previously removed. Stop reporting missing containers
when removing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the 4.0 network rewrite I introduced a regression in 094e1d70de.
It only covered the case where a checkpoint is restored via --import.
The normal restore path was not covered since the static ip/mac are now
part in an extra db bucket. This commit fixes that by changing the config
in the db.
Note that there were no test for --ignore-static-ip/mac so I added a big
system test which should cover all cases (even the ones that already
work). This is not exactly pretty but I don't have to enough time to
come up with something better at the moment.
Fixes#16666
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
subpath allows for only a subdirecty of a volumes data to be mounted in the container
add support for the named volume type sub path with others to follow.
resolves#12929
Signed-off-by: Charlie Doern <cbddoern@gmail.com>
* podman kube play support startup probe
* make probe use json string array instead of CMD-SHELL
Signed-off-by: Liang Chu-Xuan <karta0807913@gmail.com>
Just like podman-remote run users should still be able to set volumes,
of course the source must be on the server machine but this is already
the case for podman machine for example.
Fixes#16694
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The remote client should be allowed to specify if the container should
be run with the proxy env vars. It will still use the proxy vars from
the server process and not the client. This makes podman-remote more
consistent with the local version and easier to use in environments
where a proxy is required.
Fixes#16520
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If an error happening while playing a kube yaml,
clean up any pods, containers, and volumes that might
have been created before the error was hit.
This improves the user experience for when they go to
re-run the same yaml with their fixes and podman doesn't
complain about any existing workloads from the previously
failed run.
Suppress the clean up output when clean up happens after an
error as the user doesn't need to see or know about that.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Fixes e2e tests, remove '\n' from base64 encoded data.
Correct test to check that data in secret mounted file is decoded.
Closes#16269Closes#16625
Signed-off-by: Andrei Natanael Cosma <andrei@intersect.ro>
As outlined in #16076, a subsequent BARRIER *may* follow the READY
message sent by a container. To correctly imitate the behavior of
systemd's NOTIFY_SOCKET, the notify proxies span up by `kube play` must
hence process messages for the entirety of the workload.
We know that the workload is done and that all containers and pods have
exited when the service container exits. Hence, all proxies are closed
at that time.
The above changes imply that Podman runs for the entirety of the
workload and will henceforth act as the MAINPID when running inside of
systemd. Prior to this change, the service container acted as the
MAINPID which is now not possible anymore; Podman would be killed
immediately on exit of the service container and could not clean up.
The kube template now correctly transitions to in-active instead of
failed in systemd.
Fixes: #16076Fixes: #16515
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
- podman generate kube inheritents the proxy environment valiable by default.
Therefore, Env field is not empty if it is set.
- systemd-socket-acrivate needs to pass an proxy environment variable.
- busybox wget with an proxy doesn't work.
Network tests should use not wget but curl.
https://gitlab.alpinelinux.org/alpine/aports/-/issues/10446
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Move the handling of userns keys from ConvertContainer to a separate method
Adjust the method according to the different supported values
Use the new method in both ConvertContainer and ConvertKube
Pass isUser to ConvertKube as well
Add tests
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
This just calls GC on the local storage, which will remove any leftover
directories from previous containers that are not in the podman db anymore.
This is useful primarily for transient store mode, but can also help in
the case of an unclean shutdown.
Also adds some e2e test to ensure prune --external works.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
docker-compose sets the mac address in the container config and not the
network endpoint config. This is ugly when you have more than one
network, in this case docker just chooses the first network.
Fixes#16411
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The flake in #16076 is likely related to the notify message not being
delivered/read correctly. Move sending the message into an exec session
such that flakes will reveal an error message.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Since https://github.com/containers/podman/pull/16394 was merged
we now always delete the cid file if --replace=true was specified,
so we can avoid this extra command being launched.
[NO NEW TESTS NEEDED] Already tested in above PR.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
The containers should be able to write to tmpfs mounted directories.
Also cleanup output of podman kube generate to not show default values.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
These tests were unintentionally removed in commit
b47b48f (Revert "Add checkpoint image tests"). They
verify the functionality of the `--create-image` option for
`podman container checkpoint`.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
OpenShift Merge Robot
danishprakash
vyasgun
Daniel J Walsh
Urvashi Mohnani
Valentin Rothberg
dependabot[bot]
Erik Sjölund
Ed Santiago
Miloslav Trmač
Ygal Blum
Toshiki Sonoda
Alex Jia
Paul Holzinger
Stefano Brivio
Giuseppe Scrivano
Aditya R
Jason T. Greene
tomsweeneyredhat
Daniel Lublin
Ingo Becker
danishprakash
Martin Roukala (né Peres)
Dan Čermák
Matthew Heon
Romain Geissler
Ashley Cui
Jake Correnti
SamirPS
Leonardo Rossetti
Alexander Larsson
Charlie Doern
Liang Chu-Xuan
Nalin Dahyabhai
Jakob Ahrer
Matej Vasek
Andrei Natanael Cosma
Radostin Stoyanov