7b65de8771
Merge pull request #10445 from jlhawn/no_checksum_on_install
...
No longer compute checksum when installing images.
2015-01-29 15:13:29 -08:00
e636df8d96
No longer compute checksum when installing images.
...
While checksums are verified when a layer is pulled from v2 registries,
there are known issues where the checksum may change when the layer diff
is computed again. To avoid these issues, the checksum should no longer
be computed and stored until after it has been extracted to the docker
storage driver. The checksums are instead computed lazily before they
are pushed to a v2 registry.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
2015-01-29 13:52:59 -08:00
8dbaed1d96
Merge pull request #10430 from duglin/AddBuilderFolks
...
Add builder folks to the top-level maintainers file
2015-01-29 13:32:56 -08:00
c12fb48a8a
Merge pull request #10435 from SvenDowideit/add-dhe-placeholder-docs
...
DHE documentation placeholder and Navbar changes
2015-01-29 10:23:57 -08:00
5b9b5aff06
Merge pull request #10293 from SvenDowideit/test-9952
...
comment out the docker and curl lines we'll run later
2015-01-29 10:18:53 -08:00
9e10a888a3
Merge pull request #10428 from mehulkar/patch-1
...
Improve explanation of port mapping from containers
2015-01-29 10:07:24 -08:00
f1bc02e91f
Improve explanation of port mapping from containers
...
Signed-off-by: Mehul Kar <mehul.kar@gmail.com>
2015-01-29 09:09:44 -08:00
ba8e1673ad
Merge pull request #10351 from duglin/FixDocsWorkdir
...
Fix docs so WORKDIR mentions it works for COPY and ADD too
2015-01-29 09:52:01 -05:00
0ce3a49d64
DHE documentation placeholder and Navbar changes
...
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
2015-01-29 20:50:43 +10:00
d400ac756c
Merge pull request #10433 from guoxiuyan/Fix_typo
...
Fix a minor typo
2015-01-28 20:57:35 -08:00
761a020f9d
Add builder folks to the top-level maintainers file
...
Signed-off-by: Doug Davis <dug@us.ibm.com>
2015-01-28 18:32:38 -08:00
fb9363eb2a
Merge pull request #10368 from jfrazelle/lingering-exec-test
...
Move one last exec test :)
2015-01-28 21:21:05 -05:00
07d190a61c
Fix a minor typo
...
Signed-off-by: Guo Xiuyan <guoxiuyan@huawei.com>
2015-01-29 10:15:56 +08:00
c9b03c6095
Merge pull request #10142 from thaJeztah/docs-use-example-image
...
Replace "base" with "debian" in API documentation
2015-01-28 20:40:02 -05:00
c0969ed3d8
Replace "base" with "ubuntu" in documentation
...
The API documentation uses the "base" image in various
places. The "base" image is deprecated and it is no longer
possible to download this image.
This changes the API documentation to use "ubuntu" in stead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
2015-01-28 22:54:10 +01:00
b505db5e3c
Merge pull request #10420 from tianon/ubuntu-version
...
Update .deb version numbers to be more sane
2015-01-28 13:50:12 -08:00
0fab79f203
Update .deb version numbers to be more sane
...
Example output:
```console
root@906b21a861fb:/go/src/github.com/docker/docker# ./hack/make.sh binary ubuntu
bundles/1.4.1-dev already exists. Removing.
---> Making bundle: binary (in bundles/1.4.1-dev/binary)
Created binary: /go/src/github.com/docker/docker/bundles/1.4.1-dev/binary/docker-1.4.1-dev
---> Making bundle: ubuntu (in bundles/1.4.1-dev/ubuntu)
Created package {:path=>"lxc-docker-1.4.1-dev_1.4.1~dev~git20150128.182847.0.17e840a_amd64.deb"}
Created package {:path=>"lxc-docker_1.4.1~dev~git20150128.182847.0.17e840a_amd64.deb"}
```
As noted in a comment in the code here, this sums up the reasoning for this change: (which is how APT and reprepro compare versions)
```console
$ dpkg --compare-versions 1.5.0 gt 1.5.0~rc1 && echo true || echo false
true
$ dpkg --compare-versions 1.5.0~rc1 gt 1.5.0~git20150128.112847.17e840a && echo true || echo false
true
$ dpkg --compare-versions 1.5.0~git20150128.112847.17e840a gt 1.5.0~dev~git20150128.112847.17e840a && echo true || echo false
true
```
ie, `1.5.0` > `1.5.0~rc1` > `1.5.0~git20150128.112847.17e840a` > `1.5.0~dev~git20150128.112847.17e840a`
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
2015-01-28 14:26:40 -07:00
70fbd45a5c
Merge pull request #10123 from duglin/Issue10097
...
Build CMD/ENTRYPOINT cache strings properly
2015-01-28 14:43:16 -05:00
17e840a47a
Merge pull request #10416 from icecrime/update_fish_completion
...
Update fish completion for 1.5.0
2015-01-28 10:28:47 -08:00
45ef269498
Merge pull request #10406 from estesp/fixup-ipv6-bridge-creation
...
Fix bridge initialization for IPv6 if IPv4-only docker0 exists
2015-01-28 10:17:45 -08:00
13b6461570
Merge pull request #10398 from LK4D4/export_daemon_vars
...
Export DOCKER_GRAPHDRIVER and DOCKER_EXECDRIVER in integration-cli
2015-01-28 09:44:39 -08:00
9cea20ffc5
Update fish completion for 1.5.0
...
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
2015-01-28 08:52:06 -08:00
2cb82c11cf
Merge pull request #10372 from dmcgowan/v2-registry-buffer-push
...
Buffer tar file on v2 push
2015-01-28 08:47:21 -08:00
f23c136a95
Merge pull request #10357 from jfrazelle/bash-completion-stats
...
Add completion for stats.
2015-01-28 08:29:06 -08:00
c575cc697e
Merge pull request #10403 from stevvooe/v2-status-code-narrow
...
Open up v2 http status code checks for put and head checks
2015-01-28 09:38:45 -05:00
c1f3fe70df
Merge pull request #9137 from shykes/contribution-docs
...
Improve project organization
2015-01-28 01:19:29 -08:00
0c8d17b5c1
Fix bridge initialization for IPv6 if IPv4-only docker0 exists
...
This fixes the daemon's failure to start when setting --ipv6=true for
the first time without deleting `docker0` bridge from a prior use with
only IPv4 addressing.
The addition of the IPv6 bridge address is factored out into a separate
initialization routine which is called even if the bridge exists but no
IPv6 addresses are found.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
2015-01-27 23:54:26 -05:00
8d49ebd338
Merge pull request #10408 from estesp/fix-ipv6-docs
...
Fix incorrect IPv6 addresses/subnet notations in docs
2015-01-27 23:24:52 -05:00
5945de43b0
Fix incorrect IPv6 addresses/subnet notations in docs
...
Fixes a few typos in IPv6 addresses. Will make it easier for users who
actually try and copy/paste or use the example addresses directly.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
2015-01-27 22:45:43 -05:00
8893dee098
Merge pull request #10404 from liusdu/liu-dev
...
fix a minor typo in daemon/container.go
2015-01-27 18:26:40 -08:00
629815b424
Buffer tar file on v2 push
...
fixes #10312
fixes #10306
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
2015-01-27 18:11:05 -08:00
86aea582b6
Open up v2 http status code checks for put and head checks
...
Under certain cases, such as when putting a manifest or check for the existence
of a layer, the status code checks in session_v2.go were too narrow for their
purpose. In the case of putting a manifest, the handler only cares that an
error is not returned. Whether it is a 304 or 202 does not matter, as long as
the server reports success. Having the client only accept specific http codes
inhibits future protocol evolution.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
2015-01-27 18:09:53 -08:00
de52a1998d
Merge pull request #10374 from SvenDowideit/add-ip-range-for-webhooks
...
tell users they can what IP range Hub webhooks can come from so they can...
2015-01-28 11:55:09 +10:00
71f8b09543
fix a minor typo in daemon/container.go
...
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
2015-01-28 09:54:40 +08:00
196cdf1450
Merge pull request #10399 from SvenDowideit/add-registry-mirror-doc
...
Add the registry mirror document to the menu
2015-01-27 20:29:25 -05:00
1d04cc513a
Add the registry mirror document to the menu
...
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
2015-01-28 10:47:11 +10:00
b3402f34b2
Merge pull request #10322 from dmcgowan/v2-manifest-tarsum-cache
...
V2 manifest tarsum cache
2015-01-27 16:40:49 -08:00
667dc58c39
Export DOCKER_GRAPHDRIVER and DOCKER_EXECDRIVER in integration-cli
...
This needed for our "small" testing daemon using same config as "big"
testing daemon.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
2015-01-27 16:40:11 -08:00
3ac5596fe0
Merge pull request #10369 from mcfiredrill/etc-host-typo
...
fix /etc/host typo in remote API docs
2015-01-27 18:35:16 -05:00
b2b284b5cd
Merge pull request #10373 from chenhanxiao/docker-build-typo
...
docs: fix a typo in docker-build man page
2015-01-27 18:25:55 -05:00
e54d162941
Merge pull request #10371 from jlhawn/fix_build_output_10364
...
Fix premature close of build output on pull
2015-01-27 15:09:17 -08:00
8f7cf87fd9
Merge pull request #10383 from cpuguy83/update_m2dman
...
Update go-md2man
2015-01-27 13:59:58 -08:00
bb4025c4e2
Merge pull request #10230 from tianon/emptyfs
...
Update emptyfs support to work properly if scratch is already an image
2015-01-27 15:01:42 -05:00
b9650ad40b
Merge pull request #10249 from jlhawn/distribution_version_header_10247
...
Split API Version header when checking for v2
2015-01-27 11:48:42 -08:00
c81fb7fa4a
Merge pull request #10197 from vbatts/vbatts-dm_cookie_support
...
devicemapper: API for cookie support
2015-01-27 11:44:03 -08:00
e04cc93a2c
Merge pull request #10113 from imreFitos/master
...
docs: remove NAT rule when removing bridge
2015-01-27 11:22:53 -08:00
83bec40e86
Merge pull request #10370 from ashahab-altiscale/9875-apparmor-regression
...
Fixes apparmor regression
2015-01-27 10:46:22 -08:00
ab589b442d
Use layer checksum if calculated during manifest creation
...
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
2015-01-27 10:21:35 -08:00
e662775ffb
Fix premature close of build output on pull
...
The build job will sometimes trigger a pull job when the base image
does not exist. Now that engine jobs properly close their output by default
the pull job would also close the build job's stdout in a cascading close
upon completion of the pull.
This patch corrects this by wrapping the `pull` job's stdout with a
nopCloseWriter which will not close the stdout of the `build` job.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
2015-01-27 10:07:01 -08:00
79e8ca04f5
Update go-md2man
...
Update fixes some rendering issues, including improperly escaping '$' in
blocks, and actual parsing of blockcode.
`ID=$(sudo docker run -d fedora /usr/bin/top -b)` was being converted to
`ID=do docker run -d fedora/usr/bin/top -b)`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
2015-01-27 09:33:42 -05:00
Michael Crosby
Josh Hawn
Alexander Morozov
Fred Lifton
Mehul Kar
James Turnbull
Sven Dowideit
Doug Davis
Tibor Vass
guoxiuyan
Sebastiaan van Stijn
Tianon Gravi
Arnaud Porterie
Jessie Frazelle
Solomon Hykes
Phil Estes
Derek McGowan
Stephen J Day
Sven Dowideit
Liu Hua
Sven Dowideit
Alexander Morozov
Brian Goff