If you have a Dockefile with just:
FROM scratch
An error is generated but its never shown to the CLI. This PR fixes that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Handles missed comments in PR#10622 and adds an API test to validate
error returned properly for duplicate bind mounts for the same
container target path.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
We're hoping to add some new commands that don't have any args so this
PR will enable that by removing all of the hard-coded checks that require
commands to have at least one arg. It also adds some checks to each
command so we're consistent in the error message we get. Added a test
for this too.
We actually had this check in at least 3 different places (twice in the
parser and once in most cmds), this removes 2 of them (the parser ones).
Had to remove/modify some testcases because its now legal to have certain
commands w/o args - e.g. RUN. This was actually inconsistent because
we used to allow "RUN []" but not "RUN" even though they would generate
(almost) the same net result. Now we're consistent.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Addresses: #10618
Given that the user has no notification that they tried to bind mount
different directories on the same target in the container, this errors
out in that case, without changing the current code allowing for
--volumes-from to trump -v/VOLUME specifications.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
As I was reworking https://github.com/docker/docker/pull/9402 I realized
that the new testcase I just added that verified all help text is within
80 characters really should be smarter and ask "docker help" for the list
of commands to check instead of having a hard-coded list. This way
it will catch "docker execwait" automagically once #9402 is merged.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Per Erikh's suggestion at:
https://github.com/docker/docker/pull/9989#issuecomment-69832009
this PR will trim spaces in the parser to ensure that the user gets the same
results irrespetive of leading/trailing spaces.
Per @tiborvass's suggestion I added a test to make sure spaces in quotes
are not touched.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Only show the verification message if all the tarsum checks pass and the image manifest is verified.
No longer return an error when a tarsum verification fails, just reset the verification flag.
Tarsum verification is less meaningful without a verified manifest and therefore it should not cause an error.
Updated the verified image test to pull an image which expected to have a verified manifest and contents.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
I noticed that while we have tests to make sure that people don't
specify a Dockerfile (via -f) that's outside of the build context
when using the docker cli, we don't check on the server side to make
sure that API users have the same check done. This would be a security
risk.
While in there I had to add a new util func for the tests to allow us to
send content to the server that isn't json encoded - in this case a tarball
Signed-off-by: Doug Davis <dug@us.ibm.com>
The cmd.Lookup should be "-attach" and not "attach", as seen in
docker/docker/runconfig/parse.go
Signed-off-by: André Martins <martins@noironetworks.com>
Wait for the local registry-v2 test instance to become available to
avoid random tests failures.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Before the V2 registry changes, images with no config could be pushed.
This change fixes a regression that made those images not able to be
pushed to a registry.
Signed-off-by: Euan Kemp <euank@euank.com>
This fixes various tests by checking for non zero exit code, accounting for lxc-specific base-diffs, and by removing lxc specific environment vars.
It also adds the --share-ipc option to lxc-start for shared ipc namespaces.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Fixes#9629#9768
A couple of issues:
1) Volume config is not restored if we couldn't find it with the graph
driver, but bind-mounts would never be found by the graph driver since
they aren't in that dir
2) container volumes were only being restored if they were found in the
volumes repo, but volumes created by old daemons wouldn't be in the
repo until the container is at least started.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is literally the only failing test on Go 1.3.3: 🎉
```
--- FAIL: TestBuildWithTabs (0.43 seconds)
docker_cli_build_test.go:4307: Missing tabs.
Got:["/bin/sh","-c","echo\u0009one\u0009\u0009two"]
Exp:["/bin/sh","-c","echo\tone\t\ttwo"]
```
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Addresses #5811
This cleans up an error in the logic which removes localhost resolvers
from the host resolv.conf at container creation start time. Specifically
when the determination is made if any nameservers are left after
removing localhost resolvers, it was using a string match on the word
"nameserver", which could have been anywhere (including commented out)
leading to incorrect situations where no nameservers were left but the
default ones were not added.
This also adds some complexity to the regular expressions for finding
nameservers in general, as well as matching on localhost resolvers due
to the recent addition of IPv6 support. Because of IPv6 support now
available in the Docker daemon, the resolvconf code is now aware of
IPv6 enable/disable state and uses that for both filter/cleaning of
nameservers as well as adding default Google DNS (IPv4 only vs. IPv4
and IPv6 if IPv6 enabled). For all these changes, tests have been
added/strengthened to test these additional capabilities.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
To run shell(and not exit), lxc needs STDIN. Without STDIN open, it will exit 0.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Fixes#9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.
Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#10129
Makes the .dockercfg more human parsable.
Also cleaned up the (technically) racey login test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Sending capability ids instead of capability names ot LXC for --cap-add and --cap-drop.
Also fixed tests.
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Make sure that as we build the CMD/ENTRYPOINT cache strings that we don't
treat ["echo","hi"] and ["echo hi"] as the same thing due to the fact that
we're just doing a strcat on the array.
Closes#10097
Signed-off-by: Doug Davis <dug@us.ibm.com>
Tests no longer make the assumption that the daemon can be accessed
through unix:///var/run/docker.sock.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Doug Davis
Alexander Morozov
Michael Crosby
Tibor Vass
Phil Estes
Qiang Huang
Chen Hanxiao
André Martins
Arnaud Porterie
Tibor Vass
Jessie Frazelle
Brian Goff
Alexander Morozov
Derek McGowan
Abin Shahab
Jessica Frazelle
Euan
Andrew C. Bodine
Michael Crosby
Tianon Gravi
Daniel, Dao Quang Minh
HuKeping
Victor Vieux
Erik Hollensbe