This fixes various tests by checking for non zero exit code, accounting for lxc-specific base-diffs, and by removing lxc specific environment vars.
It also adds the --share-ipc option to lxc-start for shared ipc namespaces.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Fixes#9629#9768
A couple of issues:
1) Volume config is not restored if we couldn't find it with the graph
driver, but bind-mounts would never be found by the graph driver since
they aren't in that dir
2) container volumes were only being restored if they were found in the
volumes repo, but volumes created by old daemons wouldn't be in the
repo until the container is at least started.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is literally the only failing test on Go 1.3.3: 🎉
```
--- FAIL: TestBuildWithTabs (0.43 seconds)
docker_cli_build_test.go:4307: Missing tabs.
Got:["/bin/sh","-c","echo\u0009one\u0009\u0009two"]
Exp:["/bin/sh","-c","echo\tone\t\ttwo"]
```
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Addresses #5811
This cleans up an error in the logic which removes localhost resolvers
from the host resolv.conf at container creation start time. Specifically
when the determination is made if any nameservers are left after
removing localhost resolvers, it was using a string match on the word
"nameserver", which could have been anywhere (including commented out)
leading to incorrect situations where no nameservers were left but the
default ones were not added.
This also adds some complexity to the regular expressions for finding
nameservers in general, as well as matching on localhost resolvers due
to the recent addition of IPv6 support. Because of IPv6 support now
available in the Docker daemon, the resolvconf code is now aware of
IPv6 enable/disable state and uses that for both filter/cleaning of
nameservers as well as adding default Google DNS (IPv4 only vs. IPv4
and IPv6 if IPv6 enabled). For all these changes, tests have been
added/strengthened to test these additional capabilities.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
To run shell(and not exit), lxc needs STDIN. Without STDIN open, it will exit 0.
Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Fixes#9709
In cases where the volumes-from container is removed and the consuming
container is restarted, docker was trying to re-apply volumes from that
now missing container, which is uneccessary since the volumes are
already applied.
Also cleaned up the volumes-from parsing function, which was doing way more than
it should have been.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#10129
Makes the .dockercfg more human parsable.
Also cleaned up the (technically) racey login test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Sending capability ids instead of capability names ot LXC for --cap-add and --cap-drop.
Also fixed tests.
Docker-DCO-1.1-Signed-off-by: Abin Shahab <ashahab@altiscale.com> (github: ashahab-altiscale)
Make sure that as we build the CMD/ENTRYPOINT cache strings that we don't
treat ["echo","hi"] and ["echo hi"] as the same thing due to the fact that
we're just doing a strcat on the array.
Closes#10097
Signed-off-by: Doug Davis <dug@us.ibm.com>
Tests no longer make the assumption that the daemon can be accessed
through unix:///var/run/docker.sock.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Fixes: #9860
Fixes: detach and attach tty mode
We never actually need to close container `stdin` after `stdout/stderr` finishes. We only need to close the `stdin` goroutine. In some cases this also means closing `stdin` but that is already controlled by the goroutine itself.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Passing RepositoryInfo to ResolveAuthConfig, pullRepository, and pushRepository
Moving --registry-mirror configuration to registry config
Created resolve_repository job
Repo names with 'index.docker.io' or 'docker.io' are now synonymous with omitting an index name.
Adding test for RepositoryInfo
Adding tests for opts.StringSetOpts and registry.ValidateMirror
Fixing search term use of repoInfo
Adding integration tests for registry mirror configuration
Normalizing LookupImage image name to match LocalName parsing rules
Normalizing repository LocalName to avoid multiple references to an official image
Removing errorOut use in tests
Removing TODO comment
gofmt changes
golint comments cleanup. renaming RegistryOptions => registry.Options, and RegistryServiceConfig => registry.ServiceConfig
Splitting out builtins.Registry and registry.NewService calls
Stray whitespace cleanup
Moving integration tests for Mirrors and InsecureRegistries into TestNewIndexInfo unit test
Factoring out ValidateRepositoryName from NewRepositoryInfo
Removing unused IndexServerURL
Allowing json marshaling of ServiceConfig. Exposing ServiceConfig in /info
Switching to CamelCase for json marshaling
PR cleanup; removing 'Is' prefix from boolean members. Removing unneeded json tags.
Removing non-cleanup related fix for 'localhost:[port]' in splitReposName
Merge fixes for gh9735
Fixing integration test
Reapplying #9754
Adding comment on config.IndexConfigs use from isSecureIndex
Remove unused error return value from isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Adding back comment in isSecureIndex
Signed-off-by: Don Kjer <don.kjer@gmail.com>
Only modifies non-running containers resolv.conf bind mount, and only if
the container has an unmodified resolv.conf compared to its contents at
container start time (so we don't overwrite manual/automated changes
within the container runtime). For containers which are running when
the host resolv.conf changes, the update will only be applied to the
container version of resolv.conf when the container is "bounced" down
and back up (e.g. stop/start or restart)
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
The cli now doesn't echo the container ID when started using either -a
or -i. Also fixes `TestStartAttachCorrectExitCode` which incorrectly
called start with the result of wait rather than the container ID.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Add a check to make sure Dockerfile is in the build context
Add docs and a testcase
Make -f relative to current dir, not build context
Signed-off-by: Doug Davis <dug@us.ibm.com>
If .dockerignore mentions either then the client will send them to the
daemon but the daemon will erase them after the Dockerfile has been parsed
to simulate them never being sent in the first place.
an events test kept failing for me so I tried to fix that too
Closes#8330
Signed-off-by: Doug Davis <dug@us.ibm.com>
Usage string isn't printed anymore. User is adviced to see help instead
- according to coreutils standard.
Signed-off-by: Michal Minar <miminar@redhat.com>
There has been a lot of discussion (issues 4242 and 5262) about making
`FROM scratch` either a special case or making `FROM` optional, implying
starting from an empty file system.
This patch makes the build command `FROM scratch` special cased from now on
and if used does not pull/set the the initial layer of the build to the ancient
image ID (511136ea..) but instead marks the build as having no base image. The
next command in the dockerfile will create an image with a parent image ID of "".
This means every image ever can now use one fewer layer!
This also makes the image name `scratch` a reserved name by the TagStore. You
will not be able to tag an image with this name from now on. If any users
currently have an image tagged as `scratch`, they will still be able to use that
image, but will not be able to tag a new image with that name.
Goodbye '511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158',
it was nice knowing you.
Fixes#4242
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Moved Tianon's PR from: https://github.com/docker/docker/pull/7870
on top of the latest code
Closes: #3936
Signed-off-by: Andrew Page <admwiggin@gmail.com>
Signed-off-by: Doug Davis <dug@us.ibm.com>
When we use the engine/env object we can run into a situation where
a string is passed in as the value but later on when we json serialize
the name/value pairs, because the string is made up of just numbers
it appears as an integer and not a string - meaning no quotes. This
can cause parsing issues for clients.
I tried to find all spots where we call env.Set() and the type of the
name being set might end up having a value that could look like an int
(like author). In those cases I switched it to use env.SetJson() instead
because that will wrap it in quotes.
One interesting thing to note about the testcase that I modified is that
the escaped quotes should have been there all along and we were incorrectly
letting it thru. If you look at the metadata stored for that resource you
can see the quotes were escaped and we lost them during the serialization
steps because of the env.Set() stuff. The use of env is probably not the
best way to do all of this.
Closes: #9602
Signed-off-by: Doug Davis <dug@us.ibm.com>
This tests ensures that the content from a dir within a build is carried
over even if VOLUME for that dir is specified in the Dockerfile. This
test ensures this long standing functionality.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Sometimes rm begins before process death, but Kill called already after
it, so we get error - no such process.
Signed-off-by: Alexandr Morozov <lk4d4@docker.com>
Forbid `docker run -t` with a redirected stdin (such as `echo test |
docker run -ti busybox cat`). Forbid `docker exec -t` with a redirected
stdin. Forbid `docker attach` with a redirect stdin toward a tty enabled
container.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Permissions after an ADD or COPY build instructions are now restricted
to the scope of files potentially modified by the operation rather than
the entire impacted tree.
Fixes#9401.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Right now 'docker build' will send:
Sending build context to Docker daemon
to stderr, instead of stdout. This PR fixes that.
I looked in the rest of api/client/commands.go for other cases
that might do this and only one jumped out at me:
https://github.com/docker/docker/blob/master/api/client/commands.go#L2202
but I think if I changed that to go to stdout then it'll mess people up
who are expecting just the container ID to be printed to the screen and
there is no --quiet type of flag we can check.
Closes#9404
Signed-off-by: Doug Davis <dug@us.ibm.com>
Arnaud Porterie
Tibor Vass
Derek McGowan
Alexander Morozov
Andrew C. Bodine
Jessica Frazelle
Michael Crosby
Jessie Frazelle
Alexander Morozov
Michael Crosby
Brian Goff
Abin Shahab
Tianon Gravi
Daniel, Dao Quang Minh
Phil Estes
Doug Davis
HuKeping
Victor Vieux
Erik Hollensbe
Lei Jitang
Tonis Tiigi
Srini Brahmaroutu
Vincent Batts
Doug Davis
Don Kjer
Michal Minar
Victor Vieux
Seongyeol Lim
Ian Bishop
Srini Brahmaroutu
Josh Hawn
Cristian Staretu
unclejack
cc272309126