docs/network-tutorial-overlay.md at a78f7d345fb4f77ea2023c0286aa25f3e40ca0cd

25 KiB

Raw Blame History

title	description	keywords
Networking with overlay networks	Tutorials for networking with swarm services and standalone containers on multiple Docker daemons	networking, bridge, routing, ports, swarm, overlay

This series of tutorials deals with networking for swarm services. For networking with standalone containers, see Networking with swarm services. If you need to learn more about Docker networking in general, see the overview.

This topic includes four different tutorials. You can run each of them on Linux, Windows, or a Mac, but for the last two, you need a second Docker host running elsewhere.

Use the default overlay network demonstrates how to use the default overlay network that Docker sets up for you automatically when you initialize or join a swarm. This network is not the best choice for production systems.
Use user-defined overlay networks shows how to create and use your own custom overlay networks, to connect services. This is recommended for services running in production.
Use an overlay network for standalone containers shows how to communicate between standalone containers on different Docker daemons using an overlay network.
Communicate between a container and a swarm service sets up communication between a standalone container and a swarm service, using an attachable overlay network. This is supported in Docker 17.06 and higher.

Prerequisites

These requires you to have at least a single-node swarm, which means that you have started Docker and run docker swarm init on the host. You can run the examples on a multi-node swarm as well.

The last example requires Docker 17.06 or higher.

Use the default overlay network

In this example, you start an alpine service and examine the characteristics of the network from the point of view of the individual service containers.

This tutorial does not go into operation-system-specific details about how overlay networks are implemented, but focuses on how the overlay functions from the point of view of a service.

Prerequisites

This tutorial requires three physical or virtual Docker hosts which can all communicate with one another, all running new installations of Docker 17.03 or higher. This tutorial assumes that the three hosts are running on the same network with no firewall involved.

These hosts will be referred to as manager, worker-1, and worker-2. The manager host will function as both a manager and a worker, which means it can both run service tasks and manage the swarm. worker-1 and worker-2 will function as workers only,

If you don't have three hosts handy, an easy solution is to set up three Ubuntu hosts on a cloud provider such as Amazon EC2, all on the same network with all communications allowed to all hosts on that network (using a mechanism such as EC2 security groups), and then to follow the installation instructions for Docker CE on Ubuntu.

Walkthrough

Create the swarm

At the end of this procedure, all three Docker hosts will be joined to the swarm and will be connected together using an overlay network called ingress.

On master. initialize the swarm. If the host only has one network interface, the --advertise-addr flag is optional.
```
$ docker swarm init --advertise-addr=<IP-ADDRESS-OF-MANAGER>
```
Make a note of the text that is printed, as this contains the token that you will use to join worker-1 and worker-2 to the swarm. It is a good idea to store the token in a password manager.

On worker-1, join the swarm. If the host only has one network interface, the --advertise-addr flag is optional.

$ docker swarm --join --token <TOKEN> \
  --advertise-addr <IP-ADDRESS-OF-WORKER-1> \
  <IP-ADDRESS-OF-MANAGER>:2377

On worker-2, join the swarm. If the host only has one network interface, the --advertise-addr flag is optional.

$ docker swarm --join --token <TOKEN> \
  --advertise-addr <IP-ADDRESS-OF-WORKER-2> \
  <IP-ADDRESS-OF-MANAGER>:2377

On manager, list all the nodes. This command can only be done from a manager.

$ docker node ls

ID                            HOSTNAME            STATUS              AVAILABILITY        MANAGER STATUS
d68ace5iraw6whp7llvgjpu48 *   ip-172-31-34-146    Ready               Active              Leader
nvp5rwavvb8lhdggo8fcf7plg     ip-172-31-35-151    Ready               Active              
ouvx2l7qfcxisoyms8mtkgahw     ip-172-31-36-89     Ready               Active

You can also use the --filter flag to filter by role:

$ docker node ls --filter role=manager

ID                            HOSTNAME            STATUS              AVAILABILITY        MANAGER STATUS
d68ace5iraw6whp7llvgjpu48 *   ip-172-31-34-146    Ready               Active              Leader

$ docker node ls --filter role=worker

ID                            HOSTNAME            STATUS              AVAILABILITY        MANAGER STATUS
nvp5rwavvb8lhdggo8fcf7plg     ip-172-31-35-151    Ready               Active              
ouvx2l7qfcxisoyms8mtkgahw     ip-172-31-36-89     Ready               Active

List the Docker networks on manager, worker-1, and worker-2 and notice that each of them now has an overlay network called ingress and a bridge network called docker_gwbridge. Only the listing for manager is shown here:

$ docker network ls

NETWORK ID          NAME                DRIVER              SCOPE
495c570066be        bridge              bridge              local
961c6cae9945        docker_gwbridge     bridge              local
ff35ceda3643        host                host                local
trtnl4tqnc3n        ingress             overlay             swarm
c8357deec9cb        none                null                local

The docker_gwbridge connects the ingress network to the Docker host's network interface so that traffic can flow to and from swarm managers and workers. If you create swarm services and do not specify a network, they are connected to the ingress network. It is recommended that you use separate overlay networks for each application or group of applications which will work together. In the next procedure, you will create two overlay networks and connect a service to each of them.

Create the services

On manager, create a new overlay network called nginx-net:
```
$ docker network create -d overlay nginx-net
```
You don't need to create the overlay network on the other nodes, beacause it will be automatically created when one of those nodes starts running a service task which requires it.
On manager, create a 5-replica Nginx service connected to nginx-net. The service will publish port 80 to the outside world. All of the service task containers can communicate with each other without opening any ports.

Note: Services can only be created on a manager.
```
$ docker service create \
  --name my-nginx \
  --publish target=80,published=80 \
  --replicas=5 \
  --network nginx-net \
  nginx
```
The default publish mode of ingress, which is used when you do not specify a mode for the --publish flag, means that if you browse to port 80 on manager, worker-1, or worker-2, you will be connected to port 80 on one of the 5 service tasks, even if no tasks are currently running on the node you browse to. If you want to publish the port using host mode, you can add mode=host to the --publish output. However, you should also use --mode global instead of --replicas=5 in this case, since only one service task can bind a given port on a given node.
Run docker service ls to monitor the progress of service bring-up, which may take a few seconds.
Inspect the nginx-net network on master, worker-1, and worker-2. Remember that you did not need to create it manually on worker-1 and worker-2 because Docker created it for you. The output will be long, but notice the Containers and Peers sections. Containers lists all service tasks (or standalone containers) connected to the overlay network from that host.
From manager, inspect the service using docker service inspect my-nginx and notice the information about the ports and endpoints used by the service.

Create a new network nginx-net-2, then update the service to use this network instead of nginx-net:

$ docker network create -d overlay nginx-net-2

$ docker service update \
  --network-add nginx-net-2 \
  --network-rm nginx-net \
  my-nginx

Run docker service ls to verify that the service has been updated and all tasks have been redeployed. Run docker network inspect nginx-net to verify that no containers are connected to it. Run the same command for nginx-net-2 and notice that all the service task containers are connected to it.

Note: Even though overlay networks are automatically created on swarm worker nodes as needed, they are not automatically removed.
Clean up the service and the networks. From manager, run the following commands. The manager will direct the workers to remove the networks automatically.
```
$ docker service rm my-nginx
$ docker network rm nginx-net nginx-net-2
```

Use a user-defined overlay network

Prerequisites

This tutorial assumes the swarm is already set up and you are on a manager.

Walkthrough

Create the user-defined overlay network.

$ docker network create -d overlay my-overlay

Start a service using the overlay network and publishing port 80 to port 8080 on the Docker host.

$ docker service create \
  --name my-nginx \
  --network my-overlay \
  --replicas 1 \
  --publish published=8080,target=80 \
  nginx:latest

Run docker network inspect my-overlay and verify that the my-nginx service task is connected to it, by looking at the Containers section.

Remove the service and the network.

$ docker service rm my-nginx

$ docker network rm my-overlay

Use an overlay network for standalone containers

This example does the following:

initializes a swarm on host1
joins host2 to the swarm
creates an attachable overlay network
creates an alpine service with 3 replicas, connected to the overlay network
creates a single alpine container on host2, which is also attached to the overlay network
proves that the standalone container can communicate with the service tasks, and vice versa.

Prerequisites

For this test, you need two different Docker hosts, which can communicate with each other. Each host needs to be running Docker 17.06 or higher. The following ports must be open between the two Docker hosts:

TCP port 2377
TCP and UDP port 7946
UDP port 4789

One easy way to set this is up is to have two VMs (either local or on a cloud provider like AWS), each with Docker installed and running. If you're using AWS or a similar cloud computing platform, the easiest configuration is to use a security group which opens all incoming ports between the two hosts and the SSH port from your client's IP address.

This example will refer to the hosts as host1 and host2, and the command prompts will be labelled accordingly.

The example uses Linux hosts, but the same commands work on Windows.

Walk-through

Set up the swarm.
1. On host1, run docker swarm init, specifying the IP address for the interface which will communicate with the other host (for instance, the private IP address on AWS).
```
(host1) $ docker swarm init --advertise-addr 192.0.2.1

Swarm initialized: current node (l9ozqg3m6gysdnemmhoychk9p) is now a manager.

To add a worker to this swarm, run the following command:

    docker swarm join \
    --token SWMTKN-1-3mtj3k6tkuts4cpecpgjdvgj1u5jre5zwgiapox0tcjs1trqim-bfwb0ve6kf42go1rznrn0lycx \
    192.0.2.1:2377

To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.
```
  The swarm is initialized and host1 runs both manager and worker roles.
2. Copy the docker swarm join command. Open a new terminal, connect to host2, and execute the command. Add the --advertise-addr flag, specifying the IP address for the interface that will communicate with the other host (for instance, the private IP address on AWS). The last argument is the IP address of host1.
```
(host2) $ docker swarm join \
          --token SWMTKN-1-3mtj3k6tkuts4cpecpgjdvgj1u5jre5zwgiapox0tcjs1trqim-bfwb0ve6kf42go1rznrn0lycx \
          --advertise-addr 192.0.2.2:2377 \
          192.0.2.1:2377
```
  If the command succeeds, the following message is shown:
```
This node joined a swarm as a worker.
```
  Otherwise, the docker swarm join command will time out. In this case, run docker swarm leave --force on node2, verify your network and firewall settings, and try again.
Create an attachable overlay network called test-net on host1.
```
$ docker network create --driver=overlay --attachable test-net
```
You don't need to manually create the overlay on host2 because it will be created when a container or service tries to connect to it from host2.

On host1, start a container that connects to test-net:

(host1) $ docker run -dit \
          --name alpine1 \
          --network test-net \
          alpine

On host2, start a container that connects to test-net:

(host2) $ docker run -dit \
          --name alpine2 \
          --network test-net \
          alpine

The -dit flags mean to start the container detached (in the background), interactive (with the ability to type into it), and with a TTY (so you can see the input and output).

Note: There is nothing to prevent you from using the same container name on multiple hosts, but automatic service discovery will not work if you do, and you will need to refer to the containers by IP address.

Verify that test-net was created on host2:

(host2) $ docker network ls

NETWORK ID          NAME                DRIVER              SCOPE
6e327b25443d        bridge              bridge              local
10eda0b42471        docker_gwbridge     bridge              local
1b16b7e2a72c        host                host                local
lgsov6d3c6hh        ingress             overlay             swarm
6af747d9ae1e        none                null                local
uw9etrdymism        test-net            overlay             swarm

Remember that you created alpine1 from host1 and alpine2 from host2. Now, attach to alpine2 from host1:
```
(host1) $ docker container attach alpine2

#
```
Automatic service discovery worked between two containers across the overlay network!

Within the attached session, try pinging alpine1 from alpine2:
```
# ping -c 2 alpine1

PING alpine1 (10.0.0.2): 56 data bytes
64 bytes from 10.0.0.2: seq=0 ttl=64 time=0.523 ms
64 bytes from 10.0.0.2: seq=1 ttl=64 time=0.547 ms

--- alpine1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.523/0.535/0.547 ms
```
This proves that the two containers can communicate with each other using the overlay network which is connecting host1 and host2.

Detach from alpine2 using the CTRL + P CTRL + Q sequence.

Stop the containers and remove test-net from each host. Because the Docker daemons are operating independently and these are standalone containers, you need to run the commands on the individual hosts.

(host1) $ docker container stop alpine1
        $ docker container rm alpine1
        $ docker network rm test-net

(host2) $ docker container stop alpine2
        $ docker container rm alpine2
        $ docker network rm test-net

Communicate between a container and a swarm service

Prerequisites

You need Docker 17.06 or higher for this example.

Walkthrough

In this example, you start two different alpine containers on the same Docker host and do some tests to understand how they communicate with each other. You need to have Docker installed and running.

Open a terminal window. List current networks before you do anything else. Here's what you should see if you've never added a network or initialized a swarm on this Docker daemon. You may see different networks, but you should at least see these (the network IDs will be different):
```
$ docker network ls

NETWORK ID          NAME                DRIVER              SCOPE
17e324f45964        bridge              bridge              local
6ed54d316334        host                host                local
7092879f2cc8        none                null                local
```
The default bridge network is listed, along with host and none. The latter two are not fully-fledged networks, but are used to start a container connected directly to the Docker daemon host's networking stack, or to start a container with no network devices. This tutorial will connect two containers to the bridge network.

Start two alpine containers running ash, which is Alpine's default shell rather than bash. The -dit flags mean to start the container detached (in the background), interactive (with the ability to type into it), and with a TTY (so you can see the input and output). Since you are starting it detached, you won't be connected to the container right away. Instead, the container's ID will be printed. Because you have not specified any --network flags, the containers connect to the default bridge network.

$ docker run -dit --name alpine1 alpine ash

$ docker run -dit --name alpine2 alpine ash

Check that both containers are actually started:

$ docker container ls

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
602dbf1edc81        alpine              "ash"               4 seconds ago       Up 3 seconds                            alpine2
da33b7aa74b0        alpine              "ash"               17 seconds ago      Up 16 seconds                           alpine1

Inspect the bridge network to see what containers are connected to it.

$ docker network inspect bridge

[
    {
        "Name": "bridge",
        "Id": "17e324f459648a9baaea32b248d3884da102dde19396c25b30ec800068ce6b10",
        "Created": "2017-06-22T20:27:43.826654485Z",
        "Scope": "local",
        "Driver": "bridge",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "172.17.0.0/16",
                    "Gateway": "172.17.0.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Containers": {
            "602dbf1edc81813304b6cf0a647e65333dc6fe6ee6ed572dc0f686a3307c6a2c": {
                "Name": "alpine2",
                "EndpointID": "03b6aafb7ca4d7e531e292901b43719c0e34cc7eef565b38a6bf84acf50f38cd",
                "MacAddress": "02:42:ac:11:00:03",
                "IPv4Address": "172.17.0.3/16",
                "IPv6Address": ""
            },
            "da33b7aa74b0bf3bda3ebd502d404320ca112a268aafe05b4851d1e3312ed168": {
                "Name": "alpine1",
                "EndpointID": "46c044a645d6afc42ddd7857d19e9dcfb89ad790afb5c239a35ac0af5e8a5bc5",
                "MacAddress": "02:42:ac:11:00:02",
                "IPv4Address": "172.17.0.2/16",
                "IPv6Address": ""
            }
        },
        "Options": {
            "com.docker.network.bridge.default_bridge": "true",
            "com.docker.network.bridge.enable_icc": "true",
            "com.docker.network.bridge.enable_ip_masquerade": "true",
            "com.docker.network.bridge.host_binding_ipv4": "0.0.0.0",
            "com.docker.network.bridge.name": "docker0",
            "com.docker.network.driver.mtu": "1500"
        },
        "Labels": {}
    }
]

Near the top, information about the bridge network is listed, including the IP address of the gateway between the Docker host and the bridge network (172.17.0.1). Under the Containers key, each connected container is listed, along with information about its IP address (172.17.0.2 for alpine1 and 172.17.0.3 for alpine2).

The containers are running in the background. Use the docker attach command to connect to alpine1.

$ docker attach alpine1

/ #

The prompt changes to # to indicate that you are the root user within the container. Use the ip addr show command to show the network interfaces for alpine1 as they look from within the container:

# ip addr show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
27: eth0@if28: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP
    link/ether 02:42:ac:11:00:02 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.2/16 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:acff:fe11:2/64 scope link
       valid_lft forever preferred_lft forever

The first interface is the loopback device. Ignore it for now. Notice that the second interface has the IP address 172.17.0.2, which is the same address shown for alpine1 in the previous step.

From within alpine1, make sure you can connect to the internet by pinging google.com. The -c 2 flag limits the command two two ping attempts.

# ping -c 2 google.com

PING google.com (172.217.3.174): 56 data bytes
64 bytes from 172.217.3.174: seq=0 ttl=41 time=9.841 ms
64 bytes from 172.217.3.174: seq=1 ttl=41 time=9.897 ms

--- google.com ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 9.841/9.869/9.897 ms

Now try to ping the second container. First, ping it by its IP address, 172.17.0.3:

# ping -c 2 172.17.0.3

PING 172.17.0.3 (172.17.0.3): 56 data bytes
64 bytes from 172.17.0.3: seq=0 ttl=64 time=0.086 ms
64 bytes from 172.17.0.3: seq=1 ttl=64 time=0.094 ms

--- 172.17.0.3 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.086/0.090/0.094 ms

This succeeds. Next, try pinging the alpine2 container by container name. This will fail.

# ping -c 2 alpine2

ping: bad address 'alpine2'

Detach from alpine2 without stopping it by using the detach sequence, CTRL + p CTRL + q (hold down CTRL and type p followed by q). If you wish, attach to alpine2 and repeat steps 4, 5, and 6 there, substituting alpine1 for alpine2.

Stop and remove both containers.

$ docker container stop alpine1 alpine2
$ docker container rm alpine1 alpine2

Remember, the default bridge network is not recommended for production. To learn about user-defined bridge networks, continue to the next tutorial.

25 KiB Raw Blame History

Prerequisites

Use the default overlay network

Prerequisites

Walkthrough

Create the swarm

Create the services

Use a user-defined overlay network

Prerequisites

Walkthrough

Use an overlay network for standalone containers

Prerequisites

Walk-through

Communicate between a container and a swarm service

Prerequisites

Walkthrough

Other networking tutorials

25 KiB

Raw Blame History