istio.io/content/en/docs/tasks/traffic-management/ingress/gateway-api/index.md

title	description	weight	aliases	keywords	owner	test
Kubernetes Gateway API	Describes how to configure the Kubernetes Gateway API with Istio.	50	/docs/tasks/traffic-management/ingress/service-apis/ /latest/docs/tasks/traffic-management/ingress/service-apis/	traffic-management ingress gateway-api	istio/wg-networking-maintainers	yes

In addition to its own traffic management API, {{< boilerplate gateway-api-future >}} This document describes the differences between the Istio and Kubernetes APIs and provides a simple example that shows you how to configure Istio to expose a service outside the service mesh cluster using the Gateway API. Note that these APIs are an actively developed evolution of the Kubernetes Service and Ingress APIs.

{{< tip >}} Many of the Istio traffic management documents include instructions for using either the Istio or Kubernetes API (see the control ingress traffic task, for example). You can use the Gateway API, right from the start, by following the getting started instructions. {{< /tip >}}

Setup

1. The Gateway APIs do not come installed by default on most Kubernetes clusters. Install the Gateway API CRDs if they are not present:

   {{< text bash >}} $ kubectl get crd gateways.gateway.networking.k8s.io &> /dev/null ||
   { kubectl kustomize "github.com/kubernetes-sigs/gateway-api/config/crd?ref={{< k8s_gateway_api_version >}}" | kubectl apply -f -; } {{< /text >}}

2. Install Istio using the minimal profile:

   {{< text bash >}} $ istioctl install --set profile=minimal -y {{< /text >}}

Differences from Istio APIs

The Gateway APIs share a lot of similarities to the Istio APIs such as Gateway and VirtualService. The main resource shares the same name, Gateway, and the resources serve similar goals.

The new Gateway APIs aim to take the learnings from various Kubernetes ingress implementations, including Istio, to build a standardized vendor neutral API. These APIs generally serve the same purposes as Istio Gateway and VirtualService, with a few key differences:

• In Istio APIs, a Gateway configures an existing gateway Deployment/Service that has been deployed. In the Gateway APIs, the Gateway resource both configures and deploys a gateway. See Deployment Methods for more information.
• In the Istio VirtualService, all protocols are configured within a single resource. In the Gateway APIs, each protocol type has its own resource, such as HTTPRoute and TCPRoute.
• While the Gateway APIs offer a lot of rich routing functionality, it does not yet cover 100% of Istio's feature set. Work is ongoing to extend the API to cover these use cases, as well as utilizing the APIs extensibility to better expose Istio functionality.

Configuring a Gateway

See the Gateway API documentation for information about the APIs.

In this example, we will deploy a simple application and expose it externally using a Gateway.

1. First, deploy the httpbin test application:

   {{< text bash >}} $ kubectl apply -f @samples/httpbin/httpbin.yaml@ {{< /text >}}

2. Deploy the Gateway API configuration including a single exposed route (i.e., /get):

   {{< text bash >}} $ kubectl create namespace istio-ingress $ kubectl apply -f - <<EOF apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: gateway namespace: istio-ingress spec: gatewayClassName: istio listeners:

   • name: default hostname: "*.example.com" port: 80 protocol: HTTP allowedRoutes: namespaces: from: All

   ---

   apiVersion: gateway.networking.k8s.io/v1 kind: HTTPRoute metadata: name: http namespace: default spec: parentRefs:

   • name: gateway namespace: istio-ingress hostnames: ["httpbin.example.com"] rules:
   • matches:
     • path: type: PathPrefix value: /get backendRefs:
     • name: httpbin port: 8000 EOF {{< /text >}}

3. Set the Ingress Host environment variable:

   {{< text bash >}} $ kubectl wait -n istio-ingress --for=condition=programmed gateways.gateway.networking.k8s.io gateway export INGRESS_HOST=(kubectl get gateways.gateway.networking.k8s.io gateway -n istio-ingress -ojsonpath='{.status.addresses[0].value}') {{< /text >}}

4. Access the httpbin service using curl:

   {{< text bash >}} $ curl -s -I -HHost:httpbin.example.com "http://$INGRESS_HOST/get" HTTP/1.1 200 OK server: istio-envoy ... {{< /text >}}

   Note the use of the -H flag to set the Host HTTP header to "httpbin.example.com". This is needed because the HTTPRoute is configured to handle "httpbin.example.com", but in your test environment you have no DNS binding for that host and are simply sending your request to the ingress IP.

5. Access any other URL that has not been explicitly exposed. You should see an HTTP 404 error:

   {{< text bash >}} $ curl -s -I -HHost:httpbin.example.com "http://$INGRESS_HOST/headers" HTTP/1.1 404 Not Found ... {{< /text >}}

6. Update the route rule to also expose /headers and to add a header to the request:

   {{< text bash >}} $ kubectl apply -f - <<EOF apiVersion: gateway.networking.k8s.io/v1 kind: HTTPRoute metadata: name: http namespace: default spec: parentRefs:

   • name: gateway namespace: istio-ingress hostnames: ["httpbin.example.com"] rules:
   • matches:
     • path: type: PathPrefix value: /get
     • path: type: PathPrefix value: /headers filters:
     • type: RequestHeaderModifier requestHeaderModifier: add:
       • name: my-added-header value: added-value backendRefs:
     • name: httpbin port: 8000 EOF {{< /text >}}

7. Access /headers again and notice header My-Added-Header has been added to the request:

   {{< text bash >}} $ curl -s -HHost:httpbin.example.com "http://$INGRESS_HOST/headers" { "headers": { "Accept": "/", "Host": "httpbin.example.com", "My-Added-Header": "added-value", ... {{< /text >}}

Deployment methods

In the example above, you did not need to install an ingress gateway Deployment prior to configuring a Gateway. In the default configuration, a gateway Deployment and Service is automatically provisioned based on the Gateway configuration. For advanced use cases, manual deployment is still allowed.

Automated Deployment

By default, each Gateway will automatically provision a Service and Deployment of the same name. These configurations will be updated automatically if the Gateway changes (for example, if a new port is added).

These resources can be customized in a few ways:

• Annotations and labels on the Gateway will be copied to the Service and Deployment. This allows configuring things such as Internal load balancers that read from these fields.

• Istio offers an additional annotation to configure the generated resources:

  Annotation	Purpose
  networking.istio.io/service-type	Controls the Service.spec.type field. For example, set to ClusterIP to not expose the service externally. The default is LoadBalancer.

• The Service.spec.loadBalancerIP field can be explicit set by configuring the addresses field:

  {{< text yaml >}} apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: gateway spec: addresses: - value: 192.0.2.0 type: IPAddress ... {{< /text >}}

Note: only one address may be specified.

• (Advanced) The generated Pod configuration can be configured by Custom Injection Templates.

Resource Attachment and Scaling

{{< warning >}} Resource attachment is currently experimental. {{< /warning >}}

Resources can be attached to a Gateway to customize it. However, most Kubernetes resources do not currently support attaching directly to a Gateway, but they can be attached to the corresponding generated Deployment and Service instead. This is easily done because both of these resources are generated with name <gateway name>-<gateway class name> and with a label gateway.networking.k8s.io/gateway-name: <gateway name>.

For example, to deploy a Gateway with a HorizontalPodAutoscaler and PodDisruptionBudget:

{{< text yaml >}} apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: gateway spec: gatewayClassName: istio listeners:

• name: default hostname: "*.example.com" port: 80 protocol: HTTP allowedRoutes: namespaces: from: All

---

apiVersion: autoscaling/v2 kind: HorizontalPodAutoscaler metadata: name: gateway spec:

Match the generated Deployment by reference

Note: Do not use kind: Gateway.

scaleTargetRef: apiVersion: apps/v1 kind: Deployment name: gateway-istio minReplicas: 2 maxReplicas: 5 metrics:

• type: Resource resource: name: cpu target: type: Utilization averageUtilization: 50

---

apiVersion: policy/v1 kind: PodDisruptionBudget metadata: name: gateway spec: minAvailable: 1 selector: # Match the generated Deployment by label matchLabels: gateway.networking.k8s.io/gateway-name: gateway {{< /text >}}

Manual Deployment

If you do not want to have an automated deployment, a Deployment and Service can be configured manually.

When this option is done, you will need to manually link the Gateway to the Service, as well as keep their port configuration in sync.

To link a Gateway to a Service, configure the addresses field to point to a single Hostname.

{{< text yaml >}} apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: gateway spec: addresses:

• value: ingress.istio-gateways.svc.cluster.local type: Hostname ... {{< /text >}}

Mesh Traffic

The Gateway API can also be used to configure mesh traffic. This is done by configuring the parentRef to point to a service, instead of a gateway.

For example, to add a header on all calls to an in-cluster Service named example:

{{< text yaml >}} apiVersion: gateway.networking.k8s.io/v1 kind: HTTPRoute metadata: name: mesh spec: parentRefs:

• group: "" kind: Service name: example rules:
• filters:
  • type: RequestHeaderModifier requestHeaderModifier: add:
    • name: my-added-header value: added-value backendRefs:
  • name: example port: 80 {{< /text >}}

More details and examples can be found in other traffic management tasks.

Cleanup

1. Remove the httpbin sample and gateway:

   {{< text bash >}} $ kubectl delete -f @samples/httpbin/httpbin.yaml@ $ kubectl delete httproute http $ kubectl delete gateways.gateway.networking.k8s.io gateway -n istio-ingress $ kubectl delete ns istio-ingress {{< /text >}}

2. Uninstall Istio:

   {{< text bash >}} $ istioctl uninstall -y --purge $ kubectl delete ns istio-system {{< /text >}}

3. Remove the Gateway API CRDs if they are no longer needed:

   {{< text bash >}} $ kubectl kustomize "github.com/kubernetes-sigs/gateway-api/config/crd?ref={{< k8s_gateway_api_version >}}" | kubectl delete -f - {{< /text >}}