istio
/
istio.io
mirror of https://github.com/istio/istio.io.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
istio.io/content/en/docs/tasks/traffic-management/ingress/secure-ingress/index.md

24 KiB
Raw Permalink Blame History

title description weight aliases keywords owner test
Secure Gateways Expose a service outside of the service mesh over TLS or mTLS. 20
/docs/tasks/traffic-management/ingress/secure-ingress-sds/
/docs/tasks/traffic-management/ingress/secure-ingress-mount/
traffic-management
ingress
sds-credentials
istio/wg-networking-maintainers yes

The Control Ingress Traffic task describes how to configure an ingress gateway to expose an HTTP service to external traffic. This task shows how to expose a secure HTTPS service using either simple or mutual TLS.

{{< boilerplate gateway-api-support >}}

Before you begin

  • Setup Istio by following the instructions in the Installation guide.

  • Start the [httpbin]({{< github_tree >}}/samples/httpbin) sample:

    {{< text bash >}} $ kubectl apply -f @samples/httpbin/httpbin.yaml@ {{< /text >}}

  • For macOS users, verify that you use curl compiled with the LibreSSL library:

    {{< text bash >}} $ curl --version | grep LibreSSL curl 7.54.0 (x86_64-apple-darwin17.0) libcurl/7.54.0 LibreSSL/2.0.20 zlib/1.2.11 nghttp2/1.24.0 {{< /text >}}

    If the previous command outputs a version of LibreSSL as shown, your curl command should work correctly with the instructions in this task. Otherwise, try a different implementation of curl, for example on a Linux machine.

Generate client and server certificates and keys

This task requires several sets of certificates and keys which are used in the following examples. You can use your favorite tool to create them or use the commands below to generate them using openssl.

  1. Create a root certificate and private key to sign the certificates for your services:

    {{< text bash >}} $ mkdir example_certs1 $ openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example_certs1/example.com.key -out example_certs1/example.com.crt {{< /text >}}

  2. Generate a certificate and a private key for httpbin.example.com:

    {{< text bash >}} $ openssl req -out example_certs1/httpbin.example.com.csr -newkey rsa:2048 -nodes -keyout example_certs1/httpbin.example.com.key -subj "/CN=httpbin.example.com/O=httpbin organization" $ openssl x509 -req -sha256 -days 365 -CA example_certs1/example.com.crt -CAkey example_certs1/example.com.key -set_serial 0 -in example_certs1/httpbin.example.com.csr -out example_certs1/httpbin.example.com.crt {{< /text >}}

  3. Create a second set of the same kind of certificates and keys:

    {{< text bash >}} $ mkdir example_certs2 $ openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example_certs2/example.com.key -out example_certs2/example.com.crt $ openssl req -out example_certs2/httpbin.example.com.csr -newkey rsa:2048 -nodes -keyout example_certs2/httpbin.example.com.key -subj "/CN=httpbin.example.com/O=httpbin organization" $ openssl x509 -req -sha256 -days 365 -CA example_certs2/example.com.crt -CAkey example_certs2/example.com.key -set_serial 0 -in example_certs2/httpbin.example.com.csr -out example_certs2/httpbin.example.com.crt {{< /text >}}

  4. Generate a certificate and a private key for helloworld.example.com:

    {{< text bash >}} $ openssl req -out example_certs1/helloworld.example.com.csr -newkey rsa:2048 -nodes -keyout example_certs1/helloworld.example.com.key -subj "/CN=helloworld.example.com/O=helloworld organization" $ openssl x509 -req -sha256 -days 365 -CA example_certs1/example.com.crt -CAkey example_certs1/example.com.key -set_serial 1 -in example_certs1/helloworld.example.com.csr -out example_certs1/helloworld.example.com.crt {{< /text >}}

  5. Generate a client certificate and private key:

    {{< text bash >}} $ openssl req -out example_certs1/client.example.com.csr -newkey rsa:2048 -nodes -keyout example_certs1/client.example.com.key -subj "/CN=client.example.com/O=client organization" $ openssl x509 -req -sha256 -days 365 -CA example_certs1/example.com.crt -CAkey example_certs1/example.com.key -set_serial 1 -in example_certs1/client.example.com.csr -out example_certs1/client.example.com.crt {{< /text >}}

{{< tip >}} You can confirm that you have all of the needed files by running the following command:

{{< text bash >}} $ ls example_cert* example_certs1: client.example.com.crt example.com.key httpbin.example.com.crt client.example.com.csr helloworld.example.com.crt httpbin.example.com.csr client.example.com.key helloworld.example.com.csr httpbin.example.com.key example.com.crt helloworld.example.com.key

example_certs2: example.com.crt httpbin.example.com.crt httpbin.example.com.key example.com.key httpbin.example.com.csr {{< /text >}}

{{< /tip >}}

Configure a TLS ingress gateway for a single host

  1. Create a secret for the ingress gateway:

    {{< text bash >}} $ kubectl create -n istio-system secret tls httpbin-credential
    --key=example_certs1/httpbin.example.com.key
    --cert=example_certs1/httpbin.example.com.crt {{< /text >}}

  2. Configure the ingress gateway:

{{< tabset category-name="config-api" >}}

{{< tab name="Istio APIs" category-value="istio-apis" >}}

First, define a gateway with a servers: section for port 443, and specify values for credentialName to be httpbin-credential. The values are the same as the secret's name. The TLS mode should have the value of SIMPLE.

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: networking.istio.io/v1 kind: Gateway metadata: name: mygateway spec: selector: istio: ingressgateway # use istio default ingress gateway servers:

  • port: number: 443 name: https protocol: HTTPS tls: mode: SIMPLE credentialName: httpbin-credential # must be the same as secret hosts:
    • httpbin.example.com EOF {{< /text >}}

Next, configure the gateway's ingress traffic routes by defining a corresponding virtual service:

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: networking.istio.io/v1 kind: VirtualService metadata: name: httpbin spec: hosts:

  • "httpbin.example.com" gateways:
  • mygateway http:
  • match:
    • uri: prefix: /status
    • uri: prefix: /delay route:
    • destination: port: number: 8000 host: httpbin EOF {{< /text >}}

Finally, follow these instructions to set the INGRESS_HOST and SECURE_INGRESS_PORT variables for accessing the gateway.

{{< /tab >}}

{{< tab name="Gateway API" category-value="gateway-api" >}}

First, create a Kubernetes Gateway:

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: mygateway namespace: istio-system spec: gatewayClassName: istio listeners:

  • name: https hostname: "httpbin.example.com" port: 443 protocol: HTTPS tls: mode: Terminate certificateRefs:
    • name: httpbin-credential allowedRoutes: namespaces: from: Selector selector: matchLabels: kubernetes.io/metadata.name: default EOF {{< /text >}}

Next, configure the gateway's ingress traffic routes by defining a corresponding HTTPRoute:

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: gateway.networking.k8s.io/v1 kind: HTTPRoute metadata: name: httpbin spec: parentRefs:

  • name: mygateway namespace: istio-system hostnames: ["httpbin.example.com"] rules:
  • matches:
    • path: type: PathPrefix value: /status
    • path: type: PathPrefix value: /delay backendRefs:
    • name: httpbin port: 8000 EOF {{< /text >}}

Finally, get the gateway address and port from the Gateway resource:

{{< text bash >}} $ kubectl wait --for=condition=programmed gtw mygateway -n istio-system export INGRESS_HOST=(kubectl get gtw mygateway -n istio-system -o jsonpath='{.status.addresses[0].value}') export SECURE_INGRESS_PORT=(kubectl get gtw mygateway -n istio-system -o jsonpath='{.spec.listeners[?(@.name=="https")].port}') {{< /text >}}

{{< /tab >}}

{{< /tabset >}}

  1. Send an HTTPS request to access the httpbin service through HTTPS:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418" ... HTTP/2 418 ... -=[ teapot ]=-

       _...._
 .'  _ _ `.
| ."` ^ `". _,
\_;`"---"`|//
  |       ;/
  \_     _/
    `"""`

    {{< /text >}}

    The httpbin service will return the 418 I'm a Teapot code.

  2. Change the gateway's credentials by deleting the gateway's secret and then recreating it using different certificates and keys:

    {{< text bash >}} $ kubectl -n istio-system delete secret httpbin-credential $ kubectl create -n istio-system secret tls httpbin-credential
    --key=example_certs2/httpbin.example.com.key
    --cert=example_certs2/httpbin.example.com.crt {{< /text >}}

  3. Access the httpbin service with curl using the new certificate chain:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs2/example.com.crt "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418" ... HTTP/2 418 ... -=[ teapot ]=-

       _...._
 .'  _ _ `.
| ."` ^ `". _,
\_;`"---"`|//
  |       ;/
  \_     _/
    `"""`

    {{< /text >}}

  4. If you try to access httpbin using the previous certificate chain, the attempt now fails:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418" ...

    • TLSv1.2 (OUT), TLS handshake, Client hello (1):
    • TLSv1.2 (IN), TLS handshake, Server hello (2):
    • TLSv1.2 (IN), TLS handshake, Certificate (11):
    • TLSv1.2 (OUT), TLS alert, Server hello (2):
    • curl: (35) error:04FFF06A:rsa routines:CRYPTO_internal:block type is not 01 {{< /text >}}

Configure a TLS ingress gateway for multiple hosts

You can configure an ingress gateway for multiple hosts, httpbin.example.com and helloworld.example.com, for example. The ingress gateway is configured with unique credentials corresponding to each host.

  1. Restore the httpbin credentials from the previous example by deleting and recreating the secret with the original certificates and keys:

    {{< text bash >}} $ kubectl -n istio-system delete secret httpbin-credential $ kubectl create -n istio-system secret tls httpbin-credential
    --key=example_certs1/httpbin.example.com.key
    --cert=example_certs1/httpbin.example.com.crt {{< /text >}}

  2. Start the helloworld-v1 sample:

    {{< text bash >}} $ kubectl apply -f @samples/helloworld/helloworld.yaml@ -l service=helloworld $ kubectl apply -f @samples/helloworld/helloworld.yaml@ -l version=v1 {{< /text >}}

  3. Create a helloworld-credential secret:

    {{< text bash >}} $ kubectl create -n istio-system secret tls helloworld-credential
    --key=example_certs1/helloworld.example.com.key
    --cert=example_certs1/helloworld.example.com.crt {{< /text >}}

  4. Configure the ingress gateway with hosts httpbin.example.com and helloworld.example.com:

{{< tabset category-name="config-api" >}}

{{< tab name="Istio APIs" category-value="istio-apis" >}}

Define a gateway with two server sections for port 443. Set the value of credentialName on each port to httpbin-credential and helloworld-credential respectively. Set TLS mode to SIMPLE.

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: networking.istio.io/v1 kind: Gateway metadata: name: mygateway spec: selector: istio: ingressgateway # use istio default ingress gateway servers:

  • port: number: 443 name: https-httpbin protocol: HTTPS tls: mode: SIMPLE credentialName: httpbin-credential hosts:
    • httpbin.example.com
  • port: number: 443 name: https-helloworld protocol: HTTPS tls: mode: SIMPLE credentialName: helloworld-credential hosts:
    • helloworld.example.com EOF {{< /text >}}

Configure the gateway's traffic routes by defining a corresponding virtual service.

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: networking.istio.io/v1 kind: VirtualService metadata: name: helloworld spec: hosts:

  • helloworld.example.com gateways:
  • mygateway http:
  • match:
    • uri: exact: /hello route:
    • destination: host: helloworld port: number: 5000 EOF {{< /text >}}

{{< /tab >}}

{{< tab name="Gateway API" category-value="gateway-api" >}}

Configure a Gateway with two listeners for port 443. Set the value of certificateRefs on each listener to httpbin-credential and helloworld-credential respectively.

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: mygateway namespace: istio-system spec: gatewayClassName: istio listeners:

  • name: https-httpbin hostname: "httpbin.example.com" port: 443 protocol: HTTPS tls: mode: Terminate certificateRefs:
    • name: httpbin-credential allowedRoutes: namespaces: from: Selector selector: matchLabels: kubernetes.io/metadata.name: default
  • name: https-helloworld hostname: "helloworld.example.com" port: 443 protocol: HTTPS tls: mode: Terminate certificateRefs:
    • name: helloworld-credential allowedRoutes: namespaces: from: Selector selector: matchLabels: kubernetes.io/metadata.name: default EOF {{< /text >}}

Configure the gateway's traffic routes for the helloworld service:

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: gateway.networking.k8s.io/v1 kind: HTTPRoute metadata: name: helloworld spec: parentRefs:

  • name: mygateway namespace: istio-system hostnames: ["helloworld.example.com"] rules:
  • matches:
    • path: type: Exact value: /hello backendRefs:
    • name: helloworld port: 5000 EOF {{< /text >}}

{{< /tab >}}

{{< /tabset >}}

  1. Send an HTTPS request to helloworld.example.com:

    {{< text bash >}} $ curl -v -HHost:helloworld.example.com --resolve "helloworld.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt "https://helloworld.example.com:$SECURE_INGRESS_PORT/hello" ... HTTP/2 200 ... {{< /text >}}

  2. Send an HTTPS request to httpbin.example.com and still get a teapot in return:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418" ... -=[ teapot ]=-

        _...._
  .'  _ _ `.
 | ."` ^ `". _,
 \_;`"---"`|//
   |       ;/
   \_     _/
     `"""`

    {{< /text >}}

Configure a mutual TLS ingress gateway

You can extend your gateway's definition to support mutual TLS.

  1. Change the credentials of the ingress gateway by deleting its secret and creating a new one. The server uses the CA certificate to verify its clients, and we must use the key ca.crt to hold the CA certificate.

    {{< text bash >}} $ kubectl -n istio-system delete secret httpbin-credential $ kubectl create -n istio-system secret generic httpbin-credential
    --from-file=tls.key=example_certs1/httpbin.example.com.key
    --from-file=tls.crt=example_certs1/httpbin.example.com.crt
    --from-file=ca.crt=example_certs1/example.com.crt {{< /text >}}

    {{< tip >}} {{< boilerplate crl-tip >}}

    The credential may also include an OCSP Staple using the key tls.ocsp-staple which can be specified by an additional argument: --from-file=tls.ocsp-staple=/some/path/to/your-ocsp-staple.pem. {{< /tip >}}

  2. Configure the ingress gateway:

{{< tabset category-name="config-api" >}}

{{< tab name="Istio APIs" category-value="istio-apis" >}}

Change the gateway's definition to set the TLS mode to MUTUAL.

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: networking.istio.io/v1 kind: Gateway metadata: name: mygateway spec: selector: istio: ingressgateway # use istio default ingress gateway servers:

  • port: number: 443 name: https protocol: HTTPS tls: mode: MUTUAL credentialName: httpbin-credential # must be the same as secret hosts:
    • httpbin.example.com EOF {{< /text >}}

{{< /tab >}}

{{< tab name="Gateway API" category-value="gateway-api" >}}

Because the Kubernetes Gateway API does not currently support mutual TLS termination in a Gateway, we use an Istio-specific option, gateway.istio.io/tls-terminate-mode: MUTUAL, to configure it:

{{< text bash >}} $ cat <<EOF | kubectl apply -f - apiVersion: gateway.networking.k8s.io/v1 kind: Gateway metadata: name: mygateway namespace: istio-system spec: gatewayClassName: istio listeners:

  • name: https hostname: "httpbin.example.com" port: 443 protocol: HTTPS tls: mode: Terminate certificateRefs:
    • name: httpbin-credential options: gateway.istio.io/tls-terminate-mode: MUTUAL allowedRoutes: namespaces: from: Selector selector: matchLabels: kubernetes.io/metadata.name: default EOF {{< /text >}}

{{< /tab >}}

{{< /tabset >}}

  1. Attempt to send an HTTPS request using the prior approach and see how it fails:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418"

    • TLSv1.3 (OUT), TLS handshake, Client hello (1):
    • TLSv1.3 (IN), TLS handshake, Server hello (2):
    • TLSv1.3 (IN), TLS handshake, Encrypted Extensions (8):
    • TLSv1.3 (IN), TLS handshake, Request CERT (13):
    • TLSv1.3 (IN), TLS handshake, Certificate (11):
    • TLSv1.3 (IN), TLS handshake, CERT verify (15):
    • TLSv1.3 (IN), TLS handshake, Finished (20):
    • TLSv1.3 (OUT), TLS change cipher, Change cipher spec (1):
    • TLSv1.3 (OUT), TLS handshake, Certificate (11):
    • TLSv1.3 (OUT), TLS handshake, Finished (20):
    • TLSv1.3 (IN), TLS alert, unknown (628):
    • OpenSSL SSL_read: error:1409445C:SSL routines:ssl3_read_bytes:tlsv13 alert certificate required, errno 0 {{< /text >}}

  2. Pass a client certificate and private key to curl and resend the request. Pass your client's certificate with the --cert flag and your private key with the --key flag to curl:

    {{< text bash >}} $ curl -v -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST"
    --cacert example_certs1/example.com.crt --cert example_certs1/client.example.com.crt --key example_certs1/client.example.com.key
    "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418" ... -=[ teapot ]=-

        _...._
  .'  _ _ `.
 | ."` ^ `". _,
 \_;`"---"`|//
   |       ;/
   \_     _/
     `"""`

    {{< /text >}}

More info

Key formats

Istio supports reading a few different Secret formats, to support integration with various tools such as cert-manager:

  • A TLS Secret with keys tls.key and tls.crt, as described above. For mutual TLS, a ca.crt key can be used.
  • A generic Secret with keys key and cert. For mutual TLS, a cacert key can be used.
  • A generic Secret with keys key and cert. For mutual TLS, a separate generic Secret named <secret>-cacert, with a cacert key. For example, httpbin-credential has key and cert, and httpbin-credential-cacert has cacert.
  • The cacert key value can be a CA bundle consisting of concatenated individual CA certificates.

SNI Routing

An HTTPS Gateway will perform SNI matching against its configured host(s) before forwarding a request, which may cause some requests to fail. See configuring SNI routing for details.

Troubleshooting

  • Inspect the values of the INGRESS_HOST and SECURE_INGRESS_PORT environment variables. Make sure they have valid values, according to the output of the following commands:

    {{< text bash >}} $ kubectl get svc -n istio-system $ echo "INGRESS_HOST=$INGRESS_HOST, SECURE_INGRESS_PORT=$SECURE_INGRESS_PORT" {{< /text >}}

  • Make sure the value of INGRESS_HOST is an IP address. In some cloud platforms, e.g., AWS, you may get a domain name, instead. This task expects an IP address, so you will need to convert it with commands similar to the following:

    {{< text bash >}} $ nslookup ab52747ba608744d8afd530ffd975cbf-330887905.us-east-1.elb.amazonaws.com $ export INGRESS_HOST=3.225.207.109 {{< /text >}}

  • Check the log of the gateway controller for error messages:

    {{< text syntax=bash snip_id=none >}} $ kubectl logs -n istio-system {{< /text >}}

  • If using macOS, verify you are using curl compiled with the LibreSSL library, as described in the Before you begin section.

  • Verify that the secrets are successfully created in the istio-system namespace:

    {{< text bash >}} $ kubectl -n istio-system get secrets {{< /text >}}

    httpbin-credential and helloworld-credential should show in the secrets list.

  • Check the logs to verify that the ingress gateway agent has pushed the key/certificate pair to the ingress gateway:

    {{< text syntax=bash snip_id=none >}} $ kubectl logs -n istio-system {{< /text >}}

    The log should show that the httpbin-credential secret was added. If using mutual TLS, then the httpbin-credential-cacert secret should also appear. Verify the log shows that the gateway agent receives SDS requests from the ingress gateway, that the resource's name is httpbin-credential, and that the ingress gateway obtained the key/certificate pair. If using mutual TLS, the log should show key/certificate was sent to the ingress gateway, that the gateway agent received the SDS request with the httpbin-credential-cacert resource name, and that the ingress gateway obtained the root certificate.

Cleanup

  1. Delete the gateway configuration and routes:

{{< tabset category-name="config-api" >}}

{{< tab name="Istio APIs" category-value="istio-apis" >}}

{{< text bash >}} $ kubectl delete gateway mygateway $ kubectl delete virtualservice httpbin helloworld {{< /text >}}

{{< /tab >}}

{{< tab name="Gateway API" category-value="gateway-api" >}}

{{< text bash >}} $ kubectl delete -n istio-system gtw mygateway $ kubectl delete httproute httpbin helloworld {{< /text >}}

{{< /tab >}}

{{< /tabset >}}

  1. Delete the secrets, certificates and keys:

    {{< text bash >}} $ kubectl delete -n istio-system secret httpbin-credential helloworld-credential $ rm -rf ./example_certs1 ./example_certs2 {{< /text >}}

  2. Shutdown the httpbin and helloworld services:

    {{< text bash >}} $ kubectl delete -f samples/httpbin/httpbin.yaml $ kubectl delete deployment helloworld-v1 $ kubectl delete service helloworld {{< /text >}}