* Add identity-issuer-certificate-file and identity-issuer-key-file to upgrade command
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Implement logic to use identity-trust-anchors-file flag to update the anchors
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* Address remarks
Signed-off-by: Zahari Dichev <zaharidichev@gmail.com>
* No need for `processYAML()` in `install`
Since `install` uses helm to do its proxy injection, there's no need to
call `processYAML`. This also fixes an issue discovered in #3687 where
we started supporting injection of cronjobs, and even though `linkerd`'s
namespace is flagged to skip automatic injection it was being injected.
This replaces #3773 as it's a much more simpler approach.
* Removed calico logutils dependency, incompatible with go 1.13
Fixes#1153
Removed dependency on
`github.com/projectcalico/libcalico-go/lib/logutils` because it has
problems with go modules, as described in
projectcalico/libcalico-go#1153
Not a big deal since it was only used for modifying the plugin's log
format.
* Traffic split integration test
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Address comments
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Display placeholder when there is no basic stats data
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Replaced `uuid` with `uid` from linkerd-config resource
Fixes#3621
Removed the old `uuid` for identifying linkerd installations, and
replaced it with the `uid` property from the `linkerd-config` ConfigMap.
I tested that this `uid` remains the same by updating the config and
also upgrading linkerd, using both the CLI and Helm.
Note that this required granting `linkerd-web` RBAC access to the
`linkerd-config` Config.
I also added an integration test to verify the stability of the uid.
Fixes#3566
As explained in #3566, as of go 1.13 there's a strict check that ensures a dependency's timestamp matches it's sha (as declared in go.mod). Our smi-sdk dependency has a problem with that that got resolved later on, but more work would be required to upgrade that dependency. In the meantime a quick pair of replace statements at the bottom of go.mod fix the issue.
`linkerd check` can now be run from the dashboard in the `/controlplane` view.
Once the check results are received, they are displayed in a modal in a similar
style to the CLI output.
Closes#3613
* Add support for uninject command to uninject namespace configs
* Add relevant unit tests in cli/cmd/uninject_test.go
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* rework annotations doc generation from godoc parsing to map[string]string and get rid of unused yaml tags
* move annotations doc function from pkg/k8s to cli/cmd
Signed-off-by: StupidScience <tonysignal@gmail.com>
* Add cmd to inject debug sidecar for l5d components only
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Revert "Add cmd to inject debug sidecar for l5d components only"
This reverts commit 50b8b3577e.
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Stop uninjecting metadata from control plane components
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Ensure inject can be run on control plane components only if --manual is present
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* DNS rebinding protection for the dashboard
Fixes#3083 and replacement for #3629
This adds a new parameter to the `linkerd-web` container `enforcedHost`
that establishes the regexp that the Host header must enforce, otherwise
it returns an error.
This parameter will be hard-coded for now, in `linkerd-web`'s deployment
yaml.
Note this also protects the dashboard because that's proxied from
`linkerd-web`.
Also note this means the usage of `linkerd dashboard --address` will
require the user to change that parameter in the deployment yaml (or
have Kustomize do it).
How to test:
- Run `linkerd dashboard`
- Go to http://rebind.it:8080/manager.html and change the target port to
50750
- Click on “Start Attack” and wait for a minute.
- The response from the dashboard will be returned, showing an 'Invalid
Host header' message returned by the dashboard. If the attack would have
succeeded then the dashboard's html would be shown instead.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Add inject support for namespaces(Fix#3255)
* Add relevant unit tests (including overridden annotations)
Signed-off-by: Mayank Shah <mayankshah1614@gmail.com>
* If tap source IP matches many running pods then only show the IP
When an unmeshed source ip matched more than one running pod, tap was
showing the names for all those pods, even though the didn't necessary
originate the connection. This could be reproduced when using pod
network add-on such as Calico.
With this change, if a node matches, return it, otherwise we proceed to look for a matching pod. If exactly one running pod matches we return it. Otherwise we return just the IP.
Fixes#3103
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
The `linkerd upgrade --from-manifests` command supports reading the
manifest output via `linkerd install`. PR #3167 introduced a tap
APIService object into `linkerd install`, but the manifest-reading code
in fake.go was never updated to support this new object kind.
Update the fake clientset code to support APIService objects.
Fixes#3559
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The `linkerd install` `--ignore-cluster` and `--skip-checks` flags
enable generating install manifests without a connection to a k8s
cluster. Unfortunately these flags were only checked after attempted
connections to a k8s cluster were made. This satisfied the use case of
`linkerd install` "ignoring" the state of the cluster, but for
environments not connected to a cluster, the user would have to wait for
30s timeouts before getting the manifests.
Modify `linkerd install` and its subcommands to pre-emptively check for
`--ignore-cluster` and `--skip-checks`. This decreases `linkerd install
--ignore-cluster` from ~30s to ~1s, and `linkerd install control-plane
--ignore-cluster --skip-checks` from ~60s to ~1s.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
CI currently enforcing formatting rules by using the fmt linter of golang-ci-lint which is invoked from the bin/lint script. However it doesn't seem possible to use golang-ci-lint as a formatter, only as a linter which checks formatting. This means any formatter used by your IDE or invoked manually may or may not use the same formatting rules as golang-ci-lint depending on which formatter you use and which specific revision of that formatter you use.
In this change we stop using golang-ci-lint for format checking. We introduce `tools.go` and add goimports to the `go.mod` and `go.sum` files. This allows everyone to easily get the same revision of goimports by running `go install -mod=readonly golang.org/x/tools/cmd/goimports` from inside of the project. We add a step in the CI workflow that uses goimports via the `bin/fmt` script to check formatting.
Some shell gymnastics were required in the `bin/fmt` script to work around some limitations of `goimports`:
* goimports does not have a built-in mechanism for excluding directories, and we need to exclude the vendor director as well as the generated Go sources
* goimports returns a 0 exit code, even when formatting errors are detected
Signed-off-by: Alex Leong <alex@buoyant.io>
This PR aims at preventing `--cluster-domain` from being changed during `linkerd upgrade`. I am not sure this is all that is necessary, but it can probably be at least a good start. 🙂Closes#3454.
Signed-off-by: Bruno Miguel Custódio <brunomcustodio@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
### Motivation
In order to expose arbitrary headers through tap, headers and trailers should be
read from the linkerd2-proxy-api `TapEvent`s and set in the public `TapEvent`s.
This change should have no user facing changes as it just prepares the events
for JSON output in linkerd/linkerd2#3390
### Solution
The public API has been updated with a headers field for
`TapEvent_Http_RequestInit_` and `TapEvent_Http_ResponseInit_`, and trailers
field for `TapEvent_Http_ResponseEnd_`.
These values are set by reading the corresponding fields off of the proxy's tap
events.
The proto changes are equivalent to the proto changes proposed in
linkerd/linkerd2-proxy-api#33
Closes#3262
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
This reverts commit edd3b1f6d4.
This is a temporary revert of #3461 while we sort out some details of how this should configured and how it should interact with configuring a trace collector on the Linkerd proxy. We will reintroduce this change once the config plan is straightened out.
Signed-off-by: Alex Leong <alex@buoyant.io>
Fixes#278
Add `linkerd install|upgrade --disable-heartbeat` flag, and have
`linkerd check` check for the heartbeat's SA only if it's enabled.
Also added those flags into the `linkerd upgrade -h` examples.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
When running linkerd in HA mode, a cluster can be broken by bringing down the proxy-injector.
Add a label to MWC namespace selctor that skips any namespace.
Fixes#3346
Signed-off-by: hasheddan <georgedanielmangum@gmail.com>
If the namespace is controlled by an external tool or can't be installed
with Helm, disable its installation
Fixes#3412
Signed-off-by: Eugene Glotov <kivagant@gmail.com>
* Update prometheus cadvisor config to only keep container resources metrics
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Drop unused large metric
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Siggy's feedback
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Trim certs and keys in the Helm charts
Fixes#3419
When installing through the CLI the installation will fail if the certs
are malformed, so this only concerns the Helm templates.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The repo depended on an old version of client-go. It also depended on
stern, which itself depended on an old version of client-go, making
client-go upgrade non-trivial.
Update the repo to client-go v12.0.0, and also replace stern with a
fork.
This fork of stern includes the following changes:
- updated to use Go Modules
- updated to use client-go v12.0.0
- fixed log line interleaving:
- https://github.com/wercker/stern/issues/96
- based on:
- 8723308e46Fixes#3382
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Couple of injection events fixes
When generating events in quick succession against the same target, client-go issues a PATCH request instead of a POST, so we need the extra RBAC permission.
Also we have an informer on pods, so we also need the "watch" permission
for them, whose omission was causing an error entry in the logs.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#3356
1.16 removes some api groups that were already deprecated. From k8s blog
post (https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/):
```
- PodSecurityPolicy: will no longer be served from extensions/v1beta1 in
v1.16.
Migrate to the policy/v1beta1 API, available since v1.10. Existing
persisted data can be retrieved/updated via the policy/v1beta1 API.
- DaemonSet, Deployment, StatefulSet, and ReplicaSet: will no longer be
served from extensions/v1beta1, apps/v1beta1, or apps/v1beta2 in v1.16.
Migrate to the apps/v1 API, available since v1.9. Existing persisted
data can be retrieved/updated via the apps/v1 API.
```
Previous PRs had already made this change at the Helm templates level,
but we still needed to do it at the API calls and tests.
The integration tests ran fine for k8s 1.12 and 1.15. They fail on 1.16
because the upgrade integration test tries to install linkerd 2.5 which is not
compatible with 1.16.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The repo depended on a (recently broken) thrift package:
```
github.com/linkerd/linkerd2
-> contrib.go.opencensus.io/exporter/ocagent@v0.2.0
-> go.opencensus.io@v0.17.0
-> git.apache.org/thrift.git@v0.0.0-20180902110319-2566ecd5d999
```
... via this line in `controller/k8s`:
```go
_ "k8s.io/client-go/plugin/pkg/client/auth"
```
...which created a dependency on go.opencensus.io:
```bash
$ go mod why go.opencensus.io
...
github.com/linkerd/linkerd2/controller/k8s
k8s.io/client-go/plugin/pkg/client/auth
k8s.io/client-go/plugin/pkg/client/auth/azure
github.com/Azure/go-autorest/autorest
github.com/Azure/go-autorest/tracing
contrib.go.opencensus.io/exporter/ocagent
go.opencensus.io
```
Bump contrib.go.opencensus.io/exporter/ocagent from `v0.2.0` to
`v0.6.0`, creating this new dependency chain:
```
github.com/linkerd/linkerd2
-> contrib.go.opencensus.io/exporter/ocagent@v0.6.0
-> google.golang.org/api@v0.7.0
-> go.opencensus.io@v0.21.0
```
Bumping our go.opencensus.io dependency from `v0.17.0` to `v0.21.0`
pulls in this commit:
ed3a3f0bf0 (diff-37aff102a57d3d7b797f152915a6dc16)
...which removes our dependency on github.com/apache/thrift
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Set custom cluster domain in GetServiceProfileFor
* Set custom cluster domain in tap server
Move fetching cluster domain for tap server to cmd main
* Handle fetchting cluster domain errors separately
* Use custom cluster domain for traffic split adaptor
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
* Have the proxy-injector emit events upon injection/skipping injection
Fixes#3253
Have the proxy-injector emit an event whenever a injection happens, or
when injection is skipped for some reason (also added that reason into
the proxy-injector logs). The level is associated to the parent workload
(it can't be associated to the pod because at this point the pod hasn't
been persisted).
The event recorder was setup at the `webhook/server.go` level and passed
to the proxy-injector's `Inject` function. The sp-validator thus also
has access to the event recorder, but for now it's not using it.
Related changes:
- Refactored `api.GetOwnerKindAndName()` to have it return a more
generic object.
- Refactored `report.Injectable()` to also have it return the reason why
a workload is not injectable.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#3052.
Adds a unit test for the edges API endpoint. To maintain a consistent order for
testing, the returned rows in api/public/edges.go are now sorted.
* Rename template-values.go
* Define new constructor of charts.Values type
* Move all Helm values related code to the pkg/charts package
* Bump dependency
* Use '/' in filepath to remain compatible with VFS requirement
* Add unit test to verify Helm YAML output
* Alejandro's feedback
* Add unit test for Helm YAML validation (HA)
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Always use forward-slash when interacting with the VFS
Fixes#3283
Our VFS implementation relies on `net.http.FileSystem` which always
expects `/` regardless of the OS.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
### Summary
After the addition of the tap APIServer, all the logic related to tap in the public API no longer needs to be there. The servers and clients that are created but not used, as well as all the old testing infrastrucure related to tap can be removed.
This deprecates TapByResource and therefore required an update to the protobuf files with `bin/protoc-go.sh`. While the change to deprecate this method was extremely small, a lot of protobuf fils were updated in the process. These changes to the code and protobuf files should probably remain coupled since `TapByResource` is officially deprecated in the public API, but a majority of the additions/deletions are related to those files.
This draft passes `go test` as well as a local run of the integration tests.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
PR #3217 re-introduced container metrics collection to
linkerd-prometheus. This enabled linkerd-heartbeat to collect mem and
cpu metrics at the container-level.
Add container cpu and mem metrics to heartbeat requests. For each of
(destination, prometheus, linkerd-proxy), collect maximum memory and p95
cpu.
Concretely, this introduces 7 new query params to heartbeat requests:
- p99-handle-us
- max-mem-linkerd-proxy
- max-mem-destination
- max-mem-prometheus
- p95-cpu-linkerd-proxy
- p95-cpu-destination
- p95-cpu-prometheus
Part of #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds `trafficsplit` as a supported resource for the `linkerd stat` command. Users can type `linkerd stat ts` to see the apex and leaf services of their trafficsplits, as well as metrics for those leaf services.
Go dependencies which are only used by generated code had not previously been checked into the repo. Because `go generate` does not respect the `-mod=readonly` flag, running `bin/linkerd` will add these dependencies and dirty the local repo. This can interfere with the way version tags are generated.
To avoid this, we simply check these deps in.
Note that running `go mod tidy` will remove these again. Thus, it is not recommended to run `go mod tidy`.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Now that we inject at the pod level by default, `linkerd uninject` should remove the `linkerd.io/inject: enabled`
annotation. Also added a test for that.
Fix#3156
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The `linkerd-linkerd-tap-admin` ClusterRole had `watch` privileges on
`*/tap` resources. This disallowed non-namespaced tap requests of the
form: `/apis/tap.linkerd.io/v1alpha1/watch/namespaces/linkerd/tap`,
because that URL structure is interpreted by the Kubernetes API as
watching a resource of type `tap` within the linkerd namespace, rather
than tapping the linkerd namespace.
Modify `linkerd-linkerd-tap-admin` to have `watch` privileges on `*`,
enabling any request of the form
`/apis/tap.linkerd.io/v1alpha1/watch/namespaces/linkerd/*` to succeed.
Fixes#3212
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The web dashboard will be migrating to the new Tap APIService, which
requires RBAC privileges to access.
Introduce a new ClusterRole, `linkerd-linkerd-tap-admin`, which gives
cluster-wide tap privileges. Also introduce a new ClusterRoleBinding,
`linkerd-linkerd-web-admin` which binds the `linkerd-web` service
account to the new tap ClusterRole. This ClusterRoleBinding is enabled
by default, but may be disabled via a new `linkerd install` flag
`--restrict-dashboard-privileges`.
Fixes#3177
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Followup to #3148
Wrong args order in call to `profiles.RenderOpenAPI` was generating an
invalid service profile name.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Refactor proxy injection to use Helm charts
Fixes#3128
A new chart `/charts/patch` was created, that generates the JSON patch
payload that is to be returned to the k8s API when doing the injection
through the proxy injector, and it's also leveraged by the `linkerd
inject --manual` CLI.
The VFS was used by `linkerd install` to access the old chart under
`/chart`. Now the proxy injection also uses the Helm charts to generate
the JSON patch (see above) so we've moved the VFS from `cli/static` to a
new common place under `/pkg/charts/static`, and the new root for the VFS is
now `/charts`.
`linkerd install` hasn't yet migrated to use the new charts (that'll
happen in #3127), so the only change in that regard was the creation of
`/charts/chart` which is a symlink pointing to `/chart` that
`install.go` now uses, so that the VFS contains both the old and new
charts, as a temporary measure.
You can see that `/bin/Dockerfile-bin`, `/controller/Dockerfile` and
`/bin/build-cli-bin` do now `go generate` pointing to the new location
(and the `go generate` annotation was moved from `/cli/main.go` to
`pkg/charts/static/templates.go`).
The symlink trick doesn't work when building the binaries through
Docker, so `/bin/Dockerfile-bin` replaces the symlink with an actual
copy of `/chart`.
Also note that in `/controller/Dockerfile` we now need to include the
`prod` tag in `go install` like we do in `/bin/Dockerfile-bin` so that
the proxy injector does use the VFS instead of the local file system.
- The common logic to parse a chart has been moved from `install.go` to
`/pkg/charts/util.go`.
- The special ENV var in the proxy for "outbound router capacity" that
only applies to the Prometheus pod is now handled directly in the proxy
partial and all the associated go code could be removed.
- The `patch.go` lib for generating the JSON patch in go along
with its tests `patch_test.go` are no longer needed.
- Lots of functions in `/pkg/inject/inject.go` got removed/simplified
with their logic being moved into the charts themselves. As a
consequence lots of things in `inject_test.go` became irrelevant.
- Moved `template-values.go` from `/pkg/inject` to `pkg/charts` as that
contains the go structs representation of the chart variables that
will be leveraged in #3127.
Don't forget to run `/bin/helm.sh` whenever you make changes to charts
;-)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Continue of #2950.
I decided to check for the `clusterDomain` in the config map in web server main for the same reasons as as pointed out here https://github.com/linkerd/linkerd2/pull/3113#discussion_r306935817
It decouples the server implementations from the config.
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
PR #3167 introduced a Tap APIService, and migrated linkerd tap to it.
This change migrates `linkerd profile --tap` to the new Tap APIService.
Depends on #3186Fixes#3169
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
PR #3167 introduced a Tap APIService, and migrated `linkerd tap` to it.
This change migrates `linkerd top` to the new Tap APIService. It also
addresses a `panic: close of closed channel` issue, where two go
routines could both call `close(done)` on exit.
Fixes#3168
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The heartbeat cronjob specified `restartPolicy: OnFailure`. In cases
where failure was non-transient, such as if a cluster did not have
internet access, this would continuously restart and fail.
Change the heartbeat cronjob to `restartPolicy: Never`, as a failed job
has no user-facing impact.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
* increased ha resource limits
* added resource limits to proxy when HA
* update golden files in cmd/main
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
The repo relied on `dep` for managing Go dependencies. Go 1.11 shipped
with Go modules support. Go 1.13 will be released in August 2019 with
module support enabled by default, deprecating GOPATH.
This change replaces `dep` with Go modules for dependency management.
All scripts, including Docker builds and ci, should work without any dev
environment changes.
To execute `go` commands directly during development, do one of the
following:
1. clone this repo outside of `GOPATH`; or
2. run `export GO111MODULE=on`
Summary of changes:
- Docker build scripts and ci set `-mod=readonly`, to ensure
dependencies defined in `go.mod` are exactly what is used for the
builds.
- Dependency updates to `go.mod` are accomplished by running
`go build` and `go test` directly.
- `bin/go-run`, `bin/build-cli-bin`, and `bin/test-run` set
`GO111MODULE=on`, permitting usage inside and outside of GOPATH.
- `gcr.io/linkerd-io/go-deps` tags hashed from `go.mod`.
- `bin/update-codegen.sh` still requires running from GOPATH,
instructions added to BUILD.md.
Fixes#1488
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Adds more PSP restrictions
* Update test fixtures
* Updates PSP to be conditional on initContainer
- The proxy-init container runs as root and needs the PSP to allow this
user when there is an init container.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
kubectl introduced `-A` as a shorthand for `--all-namespaces` in
`v1.14.0`:
https://github.com/kubernetes/kubernetes/pull/72006
Update linkerd cli's `edges`, `get`, and `stat` commands to match this
convention.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
`linkerd check`, the web dashboard, and Grafana all perform version
checks to validate Linkerd is up to date. It's common for users to
seldom execute these codepaths. This makes it difficult to identify what
versions of Linkerd are currently in use and what environments it is
being run in, which helps prioritize testing and backports.
Introduce a `heartbeat` CronJob to the default Linkerd install. The
cronjob executes every 24 hours, starting from 5 minutes after
`linkerd install` is run.
Example check URL:
https://versioncheck.linkerd.io/version.json?
install-time=1562761177&
k8s-version=v1.15.0&
meshed-pods=8&
rps=3&
source=heartbeat&
uuid=cc4bb700-3314-426a-9f0f-ec588b9df020&
version=git-b97ee9f7
Fixes#2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The openAPIV3Schema validation in the ServiceProfiles CRD is very limited in what it can validate and is obviated by more sophisticated validation done by the validating admission controller. Therefore, we would like to remove the openAPIV3Schema validation to reduce the size and complexity of the CRD object.
To do so, we must also bump the version of the ServiceProfile custom resource from v1alpha1 to v1alpha2. This ensures that when the controller is upgraded, it will attempt to watch the v1alpha2 resource. If it cannot (because, for example, the controller pod started before the ServiceProfile CRD was updated and therefore the v1alpha2 version does not exist) then it will go into a crash loop backoff until it can. This essentially means that the controller will wait for the CRD to be upgraded to include v1alpha2 before it will start.
Bumping the version is necessary because if we did not, it would be possible for the controller to start before the CRD is updated (removing the validation). In this case, when the CRD is edited, the controller will lose its list watch on ServiceProfiles and will stop getting updates.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
When waiting for controller pods to be created or become ready, `linkerd check` doesn't offer any hints as to whether there has been an error (such as an ImagePullBackoff).
We add pod status to the output to make this more immediately obvious.
Fixes#2877
Signed-off-by: Alex Leong <alex@buoyant.io>
* Added Anti Affinity when HA is configured
* Move check to validate()
* Test output with anti-affinity when ha upgrade
* Add anti-affinity to identity deployment
* made host anti-affinity default when ha
* Define affinity template in a separate file
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When installing using some of the flags that persist in install, e.g
`linkerd install --ha`, and then doing `linkerd upgrade config` a nil
pointer error is thrown.
Fixes#3094
`newCmdUpgradeConfig()` was using passing `flags` as nil because
`linkerd upgrade config` doesn't expose any flags for the subcommand,
but turns out they're still needed down the call stack in
`setFlagsFromInstall` to reuse the flags persisted during install.
I also added a new unit test catching this.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This PR improves the CLI output for `linkerd edges` to reflect the latest API
changes.
Source and destination namespaces for each edge are now shown by default. The
`MSG` column has been replaced with `Secured` and contains a green checkmark or
the reason for no identity. A new `-o wide` flag shows the identity of client
and server if known.
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
The existing `linkerd install` error message for existing resources was
shared with `linkerd check`. Given the different contexts, the messaging
made more sense for `linkerd check` than for `linkerd install`.
Modify the error messaging for `linkerd install` to print a bare list
of existing resources, and provide instructions for proceeding.
For example:
```bash
$ linkerd install
Unable to install the Linkerd control plane. It appears that there is an existing installation:
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-controller
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-identity
If you are sure you'd like to have a fresh install, remove these resources with:
linkerd install --ignore-cluster | kubectl delete -f -
Otherwise, you can use the --ignore-cluster flag to overwrite the existing global resources.
```
Fixes#3045
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
To give better visibility into the inner workings of the kubernetes watchers in the destination service, we add some prometheus metrics.
Signed-off-by: Alex Leong <alex@buoyant.io>
PR #2603 modified the web process to read the UUID from the
`linkerd-config` ConfigMap rather than from a command line flag. The
`linkerd check` command relied on that command line flag to retrieve the
UUID as part of its version check.
Modify `linkerd check` to correctly retrieve the UUID from
`linkerd-config`. Also refactor `linkerd-config` retrieval and parsing
code to be shared between healthcheck, install, and upgrade.
Relates to #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Have `linkerd endpoints` use `Destination.Get`
Fixes#2885
We're refactoring `linkerd endpoints` so it hits
directly the `Destination.Get` endpoint, instead of relying on the
Discovery service.
For that, I've created a new `client.go` for Destination and added it to
the `APIClient` interface.
I've also added a `destinationClient` struct that mimics `tapClient`,
and whose common logic has been moved into `stream_client.go`.
Analogously, I added a `destinationServer` struct that mimics
`tapServer`.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Linkerd's CLI flags all match 1:1 with their `config.linkerd.io/*`
annotation counterparts, except `--enable-debug-sidecar`, which
corresponded to `config.linkerd.io/debug`. Additionally, the Linkerd
docs assume this 1:1 mapping.
Rename the `config.linkerd.io/debug` annotation to
`config.linkerd.io/enable-debug-sidecar`.
Relates to https://github.com/linkerd/website/issues/381
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Introduce new checks to determine existence of global resources and the
'linkerd-config' config map.
* Update pre-check to check for existence of global resources
This ensures that multiple control planes can't be installed into
different namespaces.
* Update integration test clean-up script to delete psp and crd
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Simplify port-forwarding code
Simplifies the establishment of a port-forwarding by moving the common
logic into `PortForward.Init()`
Stemmed from this
[comment](https://github.com/linkerd/linkerd2/pull/2937#discussion_r295078800)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2927
Also moved `TestInstallSP` after `TestCheckPostInstall` so we're sure
the validating webhook is ready before installing a service profile.
Signed-off-by: Alejandro Pedraza Borrero <alejandro@buoyant.io>
When installing multiple control planes, the mutatingwebhookconfiguration of the first control plane gets overwritten by any subsequent control plane install. This is caused by the fixed name given to the mutatingwebhookconfiguration manifest at install time.
This commit adds in the namespace to the manifest so that there is a unique configuration for each control plane.
Fixes#2887
* Add control plane and CNI PSP and RBAC resources
* Add the '--linkerd-cni-enabled' flag to the multi-stage install subcommands
This flag ensures that the NET_ADMIN capability is omitted from the control
plane's PSP during 'install config' and the proxy-init containers aren't
injected during 'install control-plane'.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* If HA, set the webhooks failure policy to 'Fail'
I'm adding to the linkerd namespace a new label
`linkerd.io/is-control-plane: true` that is used in the webhook configs'
selector to skip the proxy injector for this namespace. This avoids
running into the timing issues described in #2852.
Fixes#2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Add support for querying TrafficSplit resources through the common API layer. This is done by depending on the TrafficSplit client bindings from smi-sdk-go.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Fix HA during upgrade
If we have a Linkerd installation with HA, and then we do `linkerd
upgrade` without specifying `--ha`, the replicas will get set back to 1,
yet the resource requests will keep their HA values.
Desired behavior: `linkerd install --ha` adds the `ha` value into the
linkerd-config, so it should be used during upgrade even if `--ha` is
not passed to `linkerd upgrade`.
Note we still can do `linkerd upgrade --ha=false` to disable HA.
This is a prerequesite to address #2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This is a major refactor of the destination service. The goals of this refactor are to simplify the code for improved maintainability. In particular:
* Remove the "resolver" interfaces. These were a holdover from when our decision tree was more complex about how to handle different kinds of authorities. The current implementation only accepts fully qualified kubernetes service names and thus this was an unnecessary level of indirection.
* Moved the endpoints and profile watchers into their own package for a more clear separation of concerns. These watchers deal only in Kubernetes primitives and are agnostic to how they are used. This allows a cleaner layering when we use them from our gRPC service.
* Renamed the "listener" types to "translator" to make it more clear that the function of these structs is to translate kubernetes updates from the watcher to gRPC messages.
Signed-off-by: Alex Leong <alex@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Added labels to webhook configurations in charts/
* Multiple replicas of proxy-injector and sp-validator in HA
* Use ControllerComponent template variable for webhookconfigurations
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When `linkerd edges` returns JSON, the data will now be sorted alphabetically by
SRC name, meaning edges will be returned in a consistent order. Logic in the CLI
`edges.go` has also been simplified. These changes should result in the Travis
CI builds passing consistently.
This commit refactors the changes introduced by #2842 where the debug
container spec is created in the 'cli' and 'pkg' packages. This change
follows the existing pattern of annotating the YAML in the CLI code,
and injecting the sidecar spec in the shared library.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
This new annotation is used by the proxy injector to determine if the
debug container needs to be injected.
When using 'linkerd install', the 'pkg/inject' library will only inject
annotations into the workload YAML. Even though 'conf.debugSidecar'
is set in the CLI, the 'injectPodSpec()' function is never invoked on
the proxy injector side. Once the workload YAML got picked up by the
proxy injector, 'conf.debugSidecar' is already nil, since it's a different,
new 'conf' object. The new annotation ensures that the proxy injector
injects the debug container.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Adds an edges command to the CLI. `linkerd edges` displays connections between resources, and Linkerd proxy identities. Currently this feature will only display edges where both the client identity and server identity are known. The next step will be to display edges for which identity is not known and/or one-sided traffic such as Prometheus and tap requests.
Support for resources opting out of tap
Implements the `linkerd inject --disable-tap` flag (although hidden pending #2811) and the config override annotation `config.linkerd.io/disable-tap`.
Fixes#2778
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Private k8s clusters, such as the private GKE clusters offered by Google
Cloud, cannot be reached through the current API proxy method.
This commit uses the port forwarding feature already developed.
Also modify dashboard command to not fall back to ephemeral port.
Signed-off-by: Jack Price <jackprice@outlook.com>
The multi-stage args used by install, upgrade, and check were
implemented as positional arguments to their respective parent commands.
This made the help documentation unclear, and the code ambiguous as to
which flags corresponded to which stage.
Define `config` and `control-plane` stages as subcommands. The help
menus now explicitly state flags supported.
Fixes#2729
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Add support for `linkerd check config`. Validates the existence of the
Linkerd Namespace, ClusterRoles, ClusterRoleBindings, ServiceAccounts,
and CustomResourceDefitions.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
CustomResourceDefinition parsing and retrieval is not available via
client-go's `kubernetes.Interface`, but rather via a separate
`k8s.io/apiextensions-apiserver` package.
Introduce support for CustomResourceDefintion object parsing and
retrieval. This change facilitates retrieval of CRDs from the k8s API
server, and also provides CRD resources as mock objects.
Also introduce a `NewFakeAPI` constructor, deprecating
`NewFakeClientSets`. Callers need no longer be concerned with discreet
clientsets (for k8s resources vs. CRDs vs. (eventually)
ServiceProfiles), and can instead use the unified `KubernetesAPI`.
Part of #2337, in service to multi-stage check.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
All ServiceAccounts are intended to be grouped together with other RBAC
resources, particularly for `linkerd install config` output. Grafana and
Web ServiceAccounts were still included with their respective
Deployments.
Group Grafana and Web ServiceAccounts with other RBAC resources.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
`linkerd install` supports a 2-stage install process, `linkerd upgrade`
did not.
Add 2-stage support for `linkerd upgrade`. Also exercise multi-stage
functionality during upgrade integration tests.
Part of #2337
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This reverts commit 3de16d47be.
#2740 modified the ServiceProfiles CRD which will cause issues for users upgrading from the old CRD version to the new version. #2748 was an attempt to fix this by bumping the service profile CRD version, however, our testing infrastructure is not well set up to accommodate changes to CRDs because they are resources which are global to the cluster.
We revert this change for now and will revisit it in the future when we can give more thought to CRD versioning, upgrade, and testing.
Signed-off-by: Alex Leong <alex@buoyant.io>
Numerous codepaths have emerged that create k8s configs, k8s clients,
and make k8s api requests.
This branch consolidates k8s client creation and APIs. The primary
change migrates most codepaths to call `k8s.NewAPI` to instantiate a
`KubernetesAPI` struct from `pkg`. `KubernetesAPI` implements the
`kubernetes.Interface` (clientset) interface, and also persists a
`client-go` `rest.Config`.
Specific list of changes:
- removes manual GET requests from `k8s.KubernetesAPI`, in favor of
clientsets
- replaces most calls to `k8s.GetConfig`+`kubernetes.NewForConfig` with
a single `k8s.NewAPI`
- introduces a `timeout` param to `k8s.NewAPI`, currently only used by
healthchecks
- removes `NewClientSet` in `controller/k8s/clientset.go` in favor of
`k8s.NewAPI`
- removes `httpClient` and `clientset` from `HealthChecker`, use
`KubernetesAPI` instead
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Zahari Dichev
Alejandro Pedraza
Sergio C. Arteaga
Eugene Glotov
Tarun Pothulapati
Mayank Shah
StupidScience
Andrew Seigner
Alex Leong
Saurav Tiwary
Bruno M. Custódio
Ivan Sim
Kevin Leimkuhler
Daniel Mangum
arminbuerkle
陈谭军
Alena Varkockova
Andrew Seigner
Carol A. Scott
Oliver Gould
cpretzer
ethan
Thomas Rampelberg
Cody Vandermyn
Jonathan Juares Beber
Dennis Adjei-Baah
Dan
Jack Price