Fixes#2042
Adds a new field to service profile routes called `timeout`. Any requests to that route which take longer than the given timeout will be aborted and a 504 response will be returned instead. If the timeout field is not specified, a default timeout of 10 seconds is used.
Signed-off-by: Alex Leong <alex@buoyant.io>
I noticed that #2131 was able to merge even though it contained a missing ;
which should have failed lint checks. I think the problem is that if fix is
enabled, running bin/web build fixes the issue and then the lint checks pass on
the fixed but uncommitted code.
We should avoid autofixing in environments that aren't development to avoid
merging unfixed code to master.
* Export RootOptions and BuildFirewallConfiguration so that the cni-plugin can use them.
* Created the cni-plugin based on istio-cni implementation
* Create skeleton files that need to be filled out.
* Create the install scripts and finish up plugin to write iptables
* Added in an integration test around the install_cni.sh and updated the script to handle the case where it isn't the only plugin. Removed the istio kubernetes.go file in favor of pkg/k8s; initial usage of this package; found and fixed the typo in the ClusterRole and ClusterRoleBinding; found the docker-build-cni-plugin script
* Corrected an incorrect name in the docker build file for cni-plugin
* Rename linkerd2-cni to linkerd-cni
* Fixup Dockerfile and clean up code a bit as well as logging statements.
* Update Gopkg.lock after master merge.
* Update test file to remove temporary tag.
* Fixed the command to run during the test while building up the docker run.
* Added attributions to applicable files; in the test file, use a different container for each test scenario and also print the docker logs to stdout when there is an error;
* Add the --no-init-container flag to install and inject. This flag will not output the initContainer and will add an annotation assuming that the cni will be used in this case.
* Update .travis.yml to build the cni-plugin docker image before running the tests.
* Workaround golint warnings.
* Create a new command to install the linkerd-cni plugin.
* Add the --no-init-container option to linkerd inject
* Use the setup ip tables annotation during the proxy auto inject webhook prevent/allow addition of an init container; move cni-plugin tests to the integration-test section of travis
* gate the cni-plugin tests with the -integration-tests flag; remove unnecessary deployment .yaml file.
* Incorporate PR Cleanup suggestions.
* Remove the SetupIPTablesLabel annotation and use config flags and the presence of the init container to determine whether the cni-plugin writes ip tables.
* Fix a logic bug in the cni-plugin code that prevented the iptables from being written; Address PR comments; make tests pass.
* Update go deps shas
* Changed the single file install-cni plugin filename to be .conf vs .conflist; Incorporated latest PR comments around spacing with the new renderer among others.
* Fix an issue with renaming .conf to .conflist when needed.
* Renamed some of the variables to try to make it more clear what is going on.
* Address final PR comments.
* Hide cni flags for the time being.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* Update client-go to 1.13.1
Fixes#2145
* Update Dockerfile-bin with new tag
* Update all the dockerfile tags
* Clean gopkg and do not apply cluster defaults
* Update for klog
* Match existing behavior with klog
* Add klog to gopkg.lock
* Update go-deps shas
* Update klog comment
* Update comment to be a non-sentence
# Problem
In order to refactor `install` to allow for a more flexible configuration, we
should start with the format of the YAML that it renders. Using the Helm
YAML format will make it easier add flexible configuration options in the
future. Currently, the rendered template that `install` produces does not
follow this format.
# Solution
Use the internals that Helm itself uses to render an inject template that
follows the same formatting rules. Helm's `template` cmd provides a good
outline of what is needed to make Linkerd's `install` cmd work as if it was
a Chart.
# Validation
There are no new tests, but there may not be anything to test at this stage.
This is a WIP PR towards the ultimate goal of `install` allowing a more
flexible configuration.
However, `install` now uses all the Helm `template` internals and therefore
satisfies the needed properties for Helm Charts.
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
The recent routes API changes caused the Top Routes tab to stop working, as it
wasn't looking for the changed structure of the response. This PR updates that
page to accept the new API response.
This PR also adds to fields to the Top Routes query form, so that the equivalent
of linkerd routes deploy --to deploy/authors will work in the dashboard.
* Introduce resource selector and deprecate namespace field for ListPods
* Changes from code review
* Properly deprecate the field
* Do not check for nil
* Fix the mockProm usage
* Protoc changes revert
* Changed from code review
Signed-off-by: Alena Varkockova <varkockova.a@gmail.com>
As mentioned in #2006, the resource detail page currently only shows inbound/outbound traffic from resources that match the type being viewed (e.g. if we are on the page for deploy/voting, inbound/outbound traffic to a daemonset won't be shown).
This branch updates the ResourceDetail code to display traffic from more than one resource type (this applies to the Octopus Graph as well).
For things that comprise pods, e.g deployments and daemonsets, we omit showing authorities,
services and pods
This PR also updates the Metric Table to handle the display of a table of multiple different resource types.
* Simplify syntax for state variable access
* Add a warning chip if a resource isn't receiving traffic
Also add a meshed chip to the resource detail pages
When debugging control plane issues or issues pertaining to a linkerd proxy, it can be cumbersome to get logs from affected containers quickly.
This PR adds a new `logs` command to the Linkerd CLI to surface log lines from any container within linkerd's control plane. This feature relies heavily on [stern](https://github.com/wercker/stern), which already provides this behavior. This PR integrates this package into the Linkerd CLI to allow users to quickly retrieve logs whenever they run into issues when using Linkerd.
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
The outputs of the `check` and `inject` commands did not vary much
between successful and failed executions, and were a bit verbose and
challenging to parse.
Reorganize output of `check` and `inject` commands, to provide more
output when errors occur, and less output when successful.
Specific changes:
`linkerd check`
- visually group checks by category
- introduce `hintURL`'s, to provide doc links when checks fail
- add spinners when retrying, remove additional retry lines
- colored unicode characters to indicate success/warning/failure
`linkerd inject`
- modify default output to mirror `kubectl apply`
- only output non-successful inject reports
- support `--verbose` flag to output all inject reports
Fixes#1471, #1653, #1656, #1739
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
JavaScript assets could be cached across Linkerd releases, showing an
out of date ui, or a broken page.
Modify the webpack build pipeline to add a hash to the JS bundle
filename. Move all logic around webpack-dev-server state from Go into
JS, via a templatized index_bundle.js file, generated at build time.
Disable caching of index_bundle.js in Go, via a `Cache-Control` header.
Fixes#1996
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Proxy grafana requests through web service
* Fix -grafana-addr default, clarify -api-addr flag
* Fix version check in grafana dashboards
* Fix comment typo
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Imports lodash function individually, eliminate 'import _ from lodash'
This branch replaces imports of all of lodash (import _ from 'lodash' with per
function imports e..g import _isNil from 'lodash/isNil'. This reduces the bundle
size from~520 kb to ~160kb.
I've also taken the opportunity to replace our use of lodash functions with
native js functions where it makes sense (e.g. some maps, concats, sizes).
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Since we've switched to using css-in-js styling with material, we have very
little need for additional css libraries so support our ~30 lines of css. I'm
removing them in favour of a simpler configuration and inline styles.
- Adds bundle analyzer so we can see the composition of our bundle.
- Stop importing all the locales of moment.js
- Use named imports for all places we use material-ui components
- Fix a bug where, due to the controller components being relabled
linkerd-, the service mesh page wasn't showing the correct statuses.
- Fixes some eslint warnings on tests
Previously, the module assumed all linkerds were in the linkerd namespace.
Include the --linkerd-namespace flag in the query if linkerd is not in the default ns.
* Add parameter to stats API to skip retrieving Prometheus stats
Used by the dashboard to populate list of resources.
Fixes#1022
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Prometheus queries check results were being ignored
* Refactor verifyPromQueries() to also test when no prometheus queries
should be generated
* Add test for SkipStats=true
Includes adding ability to public.GenStatSummaryResponse to not generate
basicStats
* Fix previous test
* Renames UNKNOWN in the tables to (default) which is less scary (#1946)
* adds a tooltip explaining what (default) is
* adds url props to the Top Routes page, so that they query can be populated by a url
* fixes a js error that occurs when switching pages
* Show the call to action if all metric rows are UNKNOWN
* Also enable creating of a new service profile by default on the Top Routes page
* Fix bug in passing down props.classes from the Navigation component
* Adjust form appearance
Now that #1921 has merged, we can query for top routes for any resource,
not just services.
This PR adds a dropdown for all resources to the Top Routes query form.
It also adds a link to the Top Routes page in the sidebar.
Add the ability to create and download a service profile from the web UI.
This form will be displayed in the call to action if no route metrics are found.
Adds the top routes metrics to the resource detail pages.
* Add a tabbed view to the resource detail page
Add the ability to query top routes from the detail tabs
* Move ConfigureProfilesMsg to its own module
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
[web UI] Previously, we were specifying the display order to display the cli flags in the
QueryToCliCmd module. But this order is pretty standard for each command, and
I'd like to avoid hardcoding that list everywhere.
Move the handling of order into the QueryToCliCmd module.
Adds an endpoint, at /profiles/new that allows you to input a service name and
namespace, and download a service profile yaml template.
This will enable future work, where we can add more of the yaml customization via
a form in the dashboard, and use that data to help the user configure routes.
This change alters the controller's Tap service to include route labels
when translating tap events, modifies the public API to include route
metadata in responses, and modifies the tap CLI command to include
rt_ labels in tap output (when -o wide is used).
Previously, we were passing in "tap" as the command name for both the tap and
top forms, resulting in the equivalent CLI command always being linkerd tap
regardless of whether you were in the Tap or Top view.
Fix this to correctly pass in tap or top depending on the page.
Alex Leong
Risha Mars
Cody Vandermyn
Alejandro Pedraza
Thomas Rampelberg
Kevin Leimkuhler
zak
Alena Varkockova
Dennis Adjei-Baah
Andrew Seigner
Kevin Lingerfelt
Radu M
Oliver Gould