As mentioned in #2006, the resource detail page currently only shows inbound/outbound traffic from resources that match the type being viewed (e.g. if we are on the page for deploy/voting, inbound/outbound traffic to a daemonset won't be shown).
This branch updates the ResourceDetail code to display traffic from more than one resource type (this applies to the Octopus Graph as well).
For things that comprise pods, e.g deployments and daemonsets, we omit showing authorities,
services and pods
This PR also updates the Metric Table to handle the display of a table of multiple different resource types.
* Simplify syntax for state variable access
* Add a warning chip if a resource isn't receiving traffic
Also add a meshed chip to the resource detail pages
When debugging control plane issues or issues pertaining to a linkerd proxy, it can be cumbersome to get logs from affected containers quickly.
This PR adds a new `logs` command to the Linkerd CLI to surface log lines from any container within linkerd's control plane. This feature relies heavily on [stern](https://github.com/wercker/stern), which already provides this behavior. This PR integrates this package into the Linkerd CLI to allow users to quickly retrieve logs whenever they run into issues when using Linkerd.
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
The outputs of the `check` and `inject` commands did not vary much
between successful and failed executions, and were a bit verbose and
challenging to parse.
Reorganize output of `check` and `inject` commands, to provide more
output when errors occur, and less output when successful.
Specific changes:
`linkerd check`
- visually group checks by category
- introduce `hintURL`'s, to provide doc links when checks fail
- add spinners when retrying, remove additional retry lines
- colored unicode characters to indicate success/warning/failure
`linkerd inject`
- modify default output to mirror `kubectl apply`
- only output non-successful inject reports
- support `--verbose` flag to output all inject reports
Fixes#1471, #1653, #1656, #1739
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
JavaScript assets could be cached across Linkerd releases, showing an
out of date ui, or a broken page.
Modify the webpack build pipeline to add a hash to the JS bundle
filename. Move all logic around webpack-dev-server state from Go into
JS, via a templatized index_bundle.js file, generated at build time.
Disable caching of index_bundle.js in Go, via a `Cache-Control` header.
Fixes#1996
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Setup port-forwarding for linkerd dashboard command
* Output port-forward logs when --verbose flag is set
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
* Proxy grafana requests through web service
* Fix -grafana-addr default, clarify -api-addr flag
* Fix version check in grafana dashboards
* Fix comment typo
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Imports lodash function individually, eliminate 'import _ from lodash'
This branch replaces imports of all of lodash (import _ from 'lodash' with per
function imports e..g import _isNil from 'lodash/isNil'. This reduces the bundle
size from~520 kb to ~160kb.
I've also taken the opportunity to replace our use of lodash functions with
native js functions where it makes sense (e.g. some maps, concats, sizes).
Commit 1: Enable lint check for comments
Part of #217. Follow up from #1982 and #2018.
A subsequent commit will fix the ci failure.
Commit 2: Address all comment-related linter errors.
This change addresses all comment-related linter errors by doing the
following:
- Add comments to exported symbols
- Make some exported symbols private
- Recommend via TODOs that some exported symbols should should move or
be removed
This PR does not:
- Modify, move, or remove any code
- Modify existing comments
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Since we've switched to using css-in-js styling with material, we have very
little need for additional css libraries so support our ~30 lines of css. I'm
removing them in favour of a simpler configuration and inline styles.
- Adds bundle analyzer so we can see the composition of our bundle.
- Stop importing all the locales of moment.js
- Use named imports for all places we use material-ui components
- Fix a bug where, due to the controller components being relabled
linkerd-, the service mesh page wasn't showing the correct statuses.
- Fixes some eslint warnings on tests
Previously, the module assumed all linkerds were in the linkerd namespace.
Include the --linkerd-namespace flag in the query if linkerd is not in the default ns.
* Add parameter to stats API to skip retrieving Prometheus stats
Used by the dashboard to populate list of resources.
Fixes#1022
Signed-off-by: Alejandro Pedraza <alejandro.pedraza@gmail.com>
* Prometheus queries check results were being ignored
* Refactor verifyPromQueries() to also test when no prometheus queries
should be generated
* Add test for SkipStats=true
Includes adding ability to public.GenStatSummaryResponse to not generate
basicStats
* Fix previous test
* Renames UNKNOWN in the tables to (default) which is less scary (#1946)
* adds a tooltip explaining what (default) is
* adds url props to the Top Routes page, so that they query can be populated by a url
* fixes a js error that occurs when switching pages
* Show the call to action if all metric rows are UNKNOWN
* Also enable creating of a new service profile by default on the Top Routes page
* Fix bug in passing down props.classes from the Navigation component
* Adjust form appearance
Now that #1921 has merged, we can query for top routes for any resource,
not just services.
This PR adds a dropdown for all resources to the Top Routes query form.
It also adds a link to the Top Routes page in the sidebar.
Add the ability to create and download a service profile from the web UI.
This form will be displayed in the call to action if no route metrics are found.
Adds the top routes metrics to the resource detail pages.
* Add a tabbed view to the resource detail page
Add the ability to query top routes from the detail tabs
* Move ConfigureProfilesMsg to its own module
We rework the routes command so that it can accept any Kubernetes resource, making it act much more similarly to the stat command.
Signed-off-by: Alex Leong <alex@buoyant.io>
[web UI] Previously, we were specifying the display order to display the cli flags in the
QueryToCliCmd module. But this order is pretty standard for each command, and
I'd like to avoid hardcoding that list everywhere.
Move the handling of order into the QueryToCliCmd module.
Adds an endpoint, at /profiles/new that allows you to input a service name and
namespace, and download a service profile yaml template.
This will enable future work, where we can add more of the yaml customization via
a form in the dashboard, and use that data to help the user configure routes.
This change alters the controller's Tap service to include route labels
when translating tap events, modifies the public API to include route
metadata in responses, and modifies the tap CLI command to include
rt_ labels in tap output (when -o wide is used).
Previously, we were passing in "tap" as the command name for both the tap and
top forms, resulting in the equivalent CLI command always being linkerd tap
regardless of whether you were in the Tap or Top view.
Fix this to correctly pass in tap or top depending on the page.
The `--open-api` flag is an alternative to the `--template` flag for the `linkerd profile` command. It reads an OpenAPI specification file (also called a swagger file) and uses it to generate a corresponding service profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
Separates out the querying and table display of route data, so that this module
can be easily placed in other places in the UI.
Adds usability improvements to the routes query form at /routes:
- displays CLI equivalent
- adds dropdown with populated options for service / namespace
As part of this work, made TapQueryCliCmd more generic, so it can work
for other CLI commands besides tap/top.
Adds a (currently not displayed in sidebar, but available at /routes) page to
mirror the current functionality of `linkerd routes <service>`. So far, this is just a
barebones form and table, but it works.
Adds a /api/routes path and handler to the api to receive TopRoutes requests from the web.
Add a barebones ListServices endpoint, in support of autocomplete for services.
As we develop service profiles, this endpoint could probably be used to describe
more aspects of services (like, if there were some way to check whether a
service profile was enabled or not).
Accessible from the web UI via http://localhost:8084/api/services
Add a routes command which displays per-route stats for services that have service profiles defined.
This change has three parts:
* A new public-api RPC called `TopRoutes` which serves per-route stat data about a service
* An implementation of TopRoutes in the public-api service. This implementation reads per-route data from Prometheus. This is very similar to how the StatSummaries RPC and much of the code was able to be refactored and shared.
* A new CLI command called `routes` which displays the per-route data in a tabular or json format. This is very similar to the `stat` command and much of the code was able to be refactored and shared.
Note that as of the currently targeted proxy version, only outbound route stats are supported so the `--from` flag must be included in order to see data. This restriction will be lifted in an upcoming change once we add support for inbound route stats as well.
Signed-off-by: Alex Leong <alex@buoyant.io>
As a result, displays better in the material UI version of the dashboard.
Also adds Success rate to data displayed on neighbour nodes.
* Rewrite octopus arm code to be more parameterized and flexible.
As a result, displays better in the material UI version of the dashboard.
* Add Success rate to data displayed on neighbour nodes
* Fix variablilty in grid spacing by fixing the max and min widths of the chart,
and by scrolling the overflow
* Center the octopus graph so it looks better at full width
* Also add padding, so that the drop shadows aren't cut off
This replaces a couple of the MaterialUI icons introduced in #1776 with
their original counterparts in Font Awesome, but wrapped in a MaterialUI
`Icon` tag. Also fix Linkerd logo padding in sidebar.
Part of #1781.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The popover on the src/dst column in the top and tap tables disappeared
before a use could click on it.
Modify the popovers to be reachable, also reimplement them as activated
by mouse clicks rather than mouse over events, allowing the src/dst
column to be both clickable and provide an icon for popover.
Fixes#1784
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Try to squish the metrics columns so that the data fits on the page without
having to scroll the table. This was mostly evident in the Tap and Top tables,
where a lot of the table content would be initially out of view.
This branch also includes an unrelated tiny fix for max error length, which had
been changed from 500 to 50 for testing, and had not been changed back
A container called `proxy-api` runs in the Linkerd2 controller pod. This container listens on port 8086 and serves the proxy-api but does nothing other than forward gRPC requests to the destination container which listens on port 8089.
We remove the proxy-api container altogether and change the destination container to listen on port 8086 instead of 8089. The result is that clients still use the proxy-api by connecting to `proxy-api.<ns>.svc.cluster.local:8086` but the controller has one fewer containers. This results in a simpler system that is easier to reason about.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Re-add sortable column headers to tables in web UI
* Display sort icons on all sortable columns
* Disable src/dst popover in top table
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
This branch:
- adds a "meshed" badge to the namespace overview page instead
of a green checkmark (uses Chip)
- fixes aforementioned meshed indicator not showing up in firefox
- vertically centers the ( ! ) icons in the metrics tables
- vertically centers the dots in the metrics tables
Try to standardize theming and colours throughout the app:
- Move Material UI theme definition into its own file
- Use theme colours in success rate charts
- Remove all colour definitions from styles.css
- Remove unused styles in styles.css
- Audit bare h tag usage throughout the app; replace with Typography
- Standardize the colours to the theme for Progress.jsx
- Use theme colour in Spinner
- Default to warning in meshed status table bar chart
This branch includes some small appearance tweaks for tables in the app.
- Removes the restrictions on the MetricsTables for Authorities Grafana
links (Authorities Grafana dashboards were added in #1772)
- Fixes the tables overflowing their containers on the Overview page
- Allows tables to be denser, allowing for more data on screen
- Fixes the colour of the meshed status bar in the ServiceMesh page
- Rixes the ErrorModal icon alignment and colour
- Small appearance tweaks to the things in the table e.g. icons
Switch the dashboard's component library from antd to material-ui.
There are extensive changes to most of the frontend components in the app.
This branch changes all uses of antd components to their closest equivalent in
material. There is still a lot of polish that needs to go into the look of
individual components, but since the major component rewrites are done, I think
get this work in so that further work can be done in smaller branches.
Changes in this branch:
- add Material-UI 3.2.2 to the project
- replace all uses of antd with material-ui components
- remove antd from the project
- slight modifications of eslint rules
- restructuring of app components to be rendered under the Navigation
component
- deleted most of our css (replaced with material's inline styles)
- pinned package versions in package.json (mostly removing ^)
Use jest for assertions, removing the need for mocha and chai
- Clean up test dependencies
- Move dev dependencies to devDependencies
- yarn remove chai remove sinon-chai mocha
Jest is faster, has more flexibility to run a subset of the tests, and will allow
us to remove a bunch of our assertion libraries.
Many thanks to @grampelberg for prior work on this (#1000)
This PR:
- changes the test runner from karma to jest
- moves individual tests from /test/ to/js/components` where jest expects them
Adding some quick links and help to the sidebar to guide users that
are stuck the channels that are most relevant
Fixes#1716
Signed-off-by: Ben Lambert <ben@blam.sh>
To support reading and writing of the ServiceProfile custom resource, we add a codegen'd Kubernetes client for this resource.
* Adding the ServiceProfile type and related boilerplate to /controller/gen/apis/serviceprofile. This boilerplate also contains directives that control how codegen works.
* A script in /hack which invokes codegen that generates Kubernetes client machinery for interacting with ServiceProfile resources. The majority of the generated code lives in /controller/gen/client.
* The above-mentioned generated code.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Support auto sidecar-injection
1. Add proxy-injector deployment spec to cli/install/template.go
2. Inject the Linkerd CA bundle into the MutatingWebhookConfiguration
during the webhook's start-up process.
3. Add a new handler to the CA controller to create a new secret for the
webhook when a new MutatingWebhookConfiguration is created.
4. Declare a config map to store the proxy and proxy-init container
specs used during the auto-inject process.
5. Ignore namespace and pods that are labeled with
linkerd.io/auto-inject: disabled or linkerd.io/auto-inject: completed
6. Add new flag to `linkerd install` to enable/disable proxy
auto-injection
Proposed implementation for #561.
* Resolve missing packages errors
* Move the auto-inject label to the pod level
* PR review items
* Move proxy-injector to its own deployment
* Ignore pods that already have proxy injected
This ensures the webhook doesn't error out due to proxy that are injected using the command
* PR review items on creating/updating the MWC on-start
* Replace API calls to ConfigMap with file reads
* Fixed post-rebase broken tests
* Don't mutate the auto-inject label
Since we started using healhcheck.HasExistingSidecars() to ensure pods with
existing proxies aren't mutated, we don't need to use the auto-inject label as
an indicator.
This resolves a bug which happens with the kubectl run command where the deployment
is also assigned the auto-inject label. The mutation causes the pod auto-inject
label to not match the deployment label, causing kubectl run to fail.
* Tidy up unit tests
* Include proxy resource requests in sidecar config map
* Fixes to broken YAML in CLI install config
The ignore inbound and outbound ports are changed to string type to
avoid broken YAML caused by the string conversion in the uint slice.
Also, parameterized the proxy bind timeout option in template.go.
Renamed the sidecar config map to
'linkerd-proxy-injector-webhook-config'.
Signed-off-by: ihcsim <ihcsim@gmail.com>
Horizontal Pod Autoscaling does not work when container definitions in pods do not all have resource requests, so here's the ability to add CPU + Memory requests to install + inject commands by proving proxy options --proxy-cpu + --proxy-memory
Fixes#1480
Signed-off-by: Ben Lambert <ben@blam.sh>
* Add a clear button to the tap and top query forms
Add clear functionality to Tap
Add clear functionality to Top
Fix a react key error when there were multiple unmeshed upstreams
Fix bug where tap results from other queries persisted when changing the query
Fix key error in autocomplete dropdown
Use the same tap data we use to display the unmeshed resources in the Octopus
graph to add the unmeshed rows to the Inbound stat table.
The unmeshed rows are filtered by resource type, so if we're on a Deployments
page, only upstreams which are deployments will show in the table. (Others, such
as IPs, will still show in the octopus graph).
* Use the list of unmeshed resources to display unmeshed sources in the table
* Keep track of number of pods in unmeshed sources
When I deleted a resource, I noticed that hard refreshing the page resulted in
js errors that would break the UI (e.g. if you were on a pod page, and the pod's
deployment was deleted, the pod would no longer be found, and the page would
error). This PR better handles not-present resources so that the UI still shows
up and shows you that there aren't metrics for that resource.
Also clean up the undefined/undefined octopus node that would show up in that
case.
Previously, we would display source and destination info in the Top/Tap table
popovers in a vertical format. This PR places them in a table so that each type
of source/dest (ip, pod, pod owner) can be read left to right.
* Display the popover Source/Destination info for the tap and top tables in a
tabular format
* Added an arrow column between Src and Dst
When pods or deployments are in an "Initialization" phase we currently see a "warning" icon that represents pods going under some kind of change. This may sometimes seem alarming when initially injecting pods after installing Linkerd.
This PR adds a new icon that shows up when pods are in the "PodInitializing" phase and shows the former "warning" icon when there is an error in starting pods.
fixes#1652
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Draw customizable SVG paths for octopus arms.
This also combines all the unmeshed resources into a list and displays them in
one resource box, instead of adding one box per unmeshed resource. This helps
keep the box heights constant, which I want to draw the arrows.
When a resource has no tap events being streamed to the Tap UI, and a user hits the "Stop" button in the Tap page, the tap stream is left open due to the WebSocket connection not being closed.
It looks like the web server's tap client that is created to stream events from the tap server blocks the main request thread in the web server. This causes the web server to stop receiving any subsequent close frames from the UI i.e. when the "Stop" button is clicked.
This PR moves the tapClient initialization code to a separate goroutine, specifically, the goroutine that reads tap events from the incoming grpc tap stream. This allows the main thread to continue reading messages from the WebSocket connection and allow it to receive close frames.
fixes#1665
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
The success rate mini chart shows a colour based on SR, and also shows the SR
via the proportion of the chart that's filled out. If the success rate is 0% (as
in the VotePoop endpoint in the emojivoto demo), the chart would be zero
percent filled out, causing it to be entirely gray. Really, it should be entirely
red, since zero SR is pretty bad.
Fix: fully fill the bar with red if there is a zero SR
Prevent error when trying to tap without having a namespace and resource
selected by disabling the tap button.
Fixes#1670
Signed-off-by: Mathis Wiehl <mathis.wiehl@sinnerschrader.com>
* Update version checks to support release channels
* Update based on review feedback
* Fix sidebar tests
* Update CI config for edge and stable tags
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
If you go to /top and select a namespace and then a resource, and then clear the
resource, there would be a javascript error that would cause the whole app not
to render. Fix this.
Problem
Previously, we'd display one row in top per sourcePod -> dstPod. When
viewing resources at a higher level though (e.g. deployments with multiple pods)
the src/dst column displays the resource at that level, and displaying multiple
rows with deploy/foo is confusing.
Solution
Key the top table off of the resource currently being requested, so
that all the rows are rolled up appropriately. In the popover for that column,
display a list of pods/ips that are rolled up.
This branch also adds a generic list of resources to the tap/top dropdown (you
were always able to tap them, but when I switched from autocomplete to select
for this dropdown, you lost the ability to type in arbitrary resources).
If you select a from namespace and from resource in /tap and try to clear them
using the little x in the form field, there would be a huge js error causing the
app to not render. Fix this.
Also removes filterOptions which wasn't being used any more. This will probably
make parsing tap results ever so slightly faster as we're now not trying to also
aggregate potential filter options.
* Fix js errors on Tap form when Clear button is hit
* Remove filter options code since we're not using the filters anywhere
When a websocket connection is closed between Chrome and a server, we get a 1006 error code signifying abnormal closure of the websocket connection. It seems as if we only get this error on Chrome web clients. Firefox and Safari do not encounter this issue.
The solution is to suppress 1006 errors that occur in the web browser since the connection is closed anyway. There is no negative side effect that occurs when the connection is closed abnormally and so the error message is benign.
fixes#1630
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Don't display RPS unit in metrics table
* Fix Tap and Top icons not being minimized correctly
* remove metric tooltip on RPS column
* Fix extra spacing on Tap/Top in sidebar
Add checks to `linkerd check --pre` to verify that the user has permission to create:
* namespaces
* serviceaccounts
* clusterroles
* clusterrolebindings
* services
* deployments
* configmaps
Signed-off-by: Alex Leong <alex@buoyant.io>
Try to make the tap table easier to parse by moving some info into the expanded
row. You can also now click anywhere on the row to expand.
The mocks in #1629 have Authority, Path and Latency buried, but I figured they might be
useful to see in the top level, so they're here.
The `linkerd check` parameter hits
https://versioncheck.linkerd.io/version.json to check for the latest
Linkerd version. This loses information, as that endpoint is intended to
record current version, uuid, and source.
Modify `linkerd check` to set `version`, `uuid`, and `source`
parameters when performing a version check.
Part of #1604.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
I find the tap and top icons a bit strange. Using the filter icon for tap is weird because we already use the filter icon for filtering columns. The caret-up icon looks weird to me for top because it looks like something that is click to expand.
Change the tap icon to the Font Awesome microscope. Change the top icon to the Font Awesome stream.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Add version check to Grafana dashboard
The web dashboard checks the local Linkerd version against the latest
release, and informs the user if an update is available. Grafana was not
doing this.
Modify the Grafana dashboard to perform a version check, and prompt the
user to update if needed.
Fixes#1607
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* change breadcrumb header to default font in styles.css
* change font weight for header to global font weight
* adjust height pixels and set global font to Lato
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
There are two variables we use to control the volume of Top output,
maxRowsToDisplay, which controls how many rows are in the table, and
maxRowsToStore, which controls the size of the event index we keep in memory for
aggregating results.
Previously, we were only keeping in index maxRowsToDisplay rows, which for the
Resource Detail page was 10 (which is really small for high traffic rest-y
resource traffic - it causes rows to be deleted from the index too soon, and
then causes the data in the table to change a lot). Change this to store
maxRowsToStore rows, and also bump this to 50. This allows us to store results
for longer, and also ensures more consistent data over time.
Another fix for the appearance of the Top columns is to add fixed widths to the
metrics. This will prevent the table from wobbling from side to side.
A bunch of web UI tweaks:
- Add a small success rate chart to the metrics tables
- Improve latency formatting for seconds latencies
- Rename upstream/downstream to inbound/outbound
- Make Top table look consistent with rest of tables on page
- Fix widths of metrics column columns so that tables align
Consolidate the source and destination columns into one column,
and add a direction column (To/From) so the user knows if the
displayed resource is src/dst.
This PR is a result of a change request that was missed in PR #1613. This change removes an unnecessary calc() function in the sidebar.css
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
The web client displays `Websocket [code]` on websocket close errors.
Modify the web client to render a more helpful error message to the
user. If a reason is present, render that, otherwise translate the
websocket error code into a message.
Fixes#1599
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This PR adds a breadcrumb style navigation to the Linkerd dashboard. Each "crumb" links to its corresponding page in the UI.
This PR also includes a small UI fix in the sidebar. The select box always seems to revert to the All Namespaces option whenever there is a state change on the React side. The fix ensures that the select box always displays the namespace filter if it is available and revert to All Namespaces when no namespace is selected.
fixes#1464fixes#1543fixes#1627
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
* Use Tap data on Resource Detail page to display unmeshed resources
that send traffic to the specified resource.
* Don't update neighbors on every websocket recv; this causes too much rendering.
Instead, store in internal variable and update with the api results.
This branch uses the src data from tap to discern which unmeshed resources are
sending traffic to the specified resource. We then show this resource in the
octopus graph.
Note that tap is sampled data, so it's possible for an unmeshed resource to not
show up. Also, because we won't know about the resource until it appears in the
Tap results, results could pop into the chart at any time.
_.throttle setState for receiving websocket tap events to prevent continuous rerendering
Problem
We receive a lot of websocket events from the tap server. Previously, we
were processing each event as we received it, then calling setState after
processing to update the tables. Each call to setState triggered a re-render of
the whole table. We were rerendering multiplie times a second, causing the whole
page to become unresponsive.
Solution
Throttle setState for receiving websocket tap events to prevent
continuous rerendering. Store the tap events in an index outside of state, and
only update the state once every specified interval (currently 500ms).
We can now view entire namespaces with Top and the page won't crash!
To verify: Go to /top and try topping a namespace
When scrollbars are set to always be visible in a browser, we see them appear in the sidebar component of the dashboard.
This PR adds CSS that hides the scrollbar for WebKit browsers, i.e., Chrome and Safari and uses an overflow: hidden technique inspired by this solution to hide the scrollbar in Firefox.
fixes#1611
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Adds a new page that shows all namespaces in an accordion. This will replace
ServiceMesh as the default landing page.
The page will request stats for all namespaces, and then pick the first meshed
namespace that's not the linkerd namespace to auto-expand in the accordion.
This branch also updates the definition of "added to the mesh" in the frontend
to be runningPodCount > 0 && meshedPodCount > 0 (previously, it was
runningPodCount === meshedPodCount, which would count resources with no pods as
"added").
I've also moved the link to /namespaces out of the top-level sidebar and into
the Resources sub-menu.
* Use url query params for tap/top form filters
* Add comment explaining react-url-query onChange handlers
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Previously, WebSocket error messages would appear with the first
couple characters cut off. I've fixed this by using ws.WriteControl
instead of ws.WriteMessage to write errors, as gorilla does in
their example app.
- Use writeControl to write error messages to the client
- Stop the spinner if there is an error present
For a better UI experience, the sidebar should be able to scroll independently from the detail view. This PR allows both the sidebar and the detail view to scroll independently.
fixes#1547
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
- Use an ant Select instead of Autocomplete for resource list, so that the user
can see all available tappable resources
- Fix bug where the authority autocomplete wasn't showing any options
- Adds "namespace/" as an option in the resource selection dropdown
This required some weird handling because we allow requests of the form
linkerd tap namespace/linkerd (taps namespace linkerd)
but not
linkerd tap namespace --namespace linkerd (does not work as intended,
taps every namespace)
Remove twitter, github and slack links from the sidebar.
The "Update Linkerd" menu item will still show up if there's an update.
The "Update now" button will also still show.
Increase the MaxRps on the tap server to 100 RPS.
The max RPS for tap/top was increased in for the CLI #1531, but we were
still manually setting this to 1 RPS in the Web UI and Web server.
Remove the pervasive setting of MaxRps to 1 in the web frontend and server
In #1540 I moved the version check code and was using our prefixed version of
fetch. This is unnecessary because the version check URL doesn't depend on the
dashboard URL prefix.
TLDR Don't use prefixed fetch for version check
A bunch of small items.
This branch:
- filters out un-meshed resources from the Tap and Top autocompletes
- removes an un-rendered title attribute from the sidebar menu items
- formats latency in Tap with a comma
- prevents the grafana link from showing if there are 0 pods in a deployment
When the mesh completion message calls to action it prints a CLI command to copy&paste. It's visually hard to separate message from the command snippet which is what this commit fixes.
Flipped background and font color to create a better visual distinction
Successfully ran web app test suite
Signed-off-by: Sebastian Tiedtke <sebastiantiedtke@gmail.com>
Previously, we included a version check in the server polling loop, which meant
we were hitting the version check endpoint once very 10 seconds from the
sidebar. This PR moves that check out of the loop so that we only hit it once,
upon pageload.
This PR also includes
- some whitespace fixes
- a fix for a console error we were triggering with our tests
Linkerd CLI's "look and feel" is similar to Kubernetes kubectl CLI. Linkerd's dashboard can be extended to match Kubernetes dashboard UI.
This PR serves as a starting point for this work. The new sidebar shows all resources from all namespaces on initial page load. Resources can be filtered to show only items in a given namespace. The sidebar displays authority, deployment, service and, pod resources. We may need to think about whether it is necessary to show all resources types. Some resources, i.e. authorities, contain a large cardinality of resource details and may not be very useful to a user.
fixes#1449
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Includes a substantial refactor of Top.jsx to move the websocket
and top-request-aggregation code into a self-contained module
so that this code can be shared by /top and by each resource
detail page.
(This refactor also helps separate concerns in that
page; since that page also makes 10 second requests to the stat
api to populate the autocompletes in the form).
The TopModule uses the startTap prop to figure out whether it
should start a websocket connection and make a tap request
when mounted. (This is because the resource detail pages
start tapping immediately upon load, whereas /top can only
start once you've entered a query.
I've removed the spinner and the awaitingWebSocketConnection
state field because that now belongs in the top module. I think a
similar refactor of tap would be good before we re-add it.
Do a little more work to get the octopus graph closer to the mocks.
This version gives you a slightly better navigational sense of where
you are in the app, and gives you a clearer
view of the neighbouring stats
Add a basic top graph depicting the current resource's stats
and it's upstreams and downstreams.
Also add upstreams and downstreams tables for this resource
This will be styled more later, but just getting the basic components
and data onto the page.
Add a pod table to the Resource Detail page showing metrics
for pods belonging to a resource.
In the future, I think we'll modify the stat summary endpoint to
take multiple resources as arguments, and have the resource detail page
first query for the pods associated with the resource and then
query for stats for those pods.
See #1467 for discussion.
This PR also modifies the queries to not use the withREST component, in anticipation of the above changes.
* Upgrade to dep 0.5.0, go 1.10.3
* Remove existing dep binary if it's the wrong version
* Add version in filename of dep binary to prevent version conflicts
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
This PR started out as a PR to link to our Resource Detail dashboard in
addition to grafana in the resource list pages, but I decided to refactor
the way we deal with our svgs since I was here.
This branch:
- modifies the GrafanaLink component to consist of the grafana icon
that links to grafana adds links to the ResourceDetail page in all our metrics tables
- adds a jsx component we can use to wrap svgs so that we don't get
annoying 404s on images that we have to handle
- remove the relative paths hack for images
- removes unused svg files in /img
Remove old unused graphs from the web code (scatter plot and line graph)
and their associated css
Files removed:
web/app/css/line-graph.css
web/app/css/list.css
web/app/css/scatterplot.css
web/app/css/version.css
web/app/js/components/LineGraph.jsx
web/app/js/components/ScatterPlot.jsx
Currently conduit stat outputs a column that shows the number of meshed pods in the resource being
queried. The web UI does not have this information about meshed pod state.
This commit adds a meshed column for better UI parity with the stat command.
Signed-off-by: Dennis Adjei-Baah <dennis@buoyant.io>
Add a Top page to the linkerd web UI. This is the web equivalent of #1435.
I've used the same fields as in the current implementation.
This branch also includes some slight refactors to the Tap code to enable code reuse.
The request processing logic is pretty similar to that in Tap.jsx, except that we can
immediately discard the result once we receive the response end and aggregate
that result into the top results. So the index of tap results will tend to be smaller
(unless they're long running requests like streaming). But we also add a similar
index of aggregated Top results, and discard oldest results if top has been
running for a long time.
* Add a Top page to the web UI
* Refactor Tap event parsing into common util code
* Small refactors to the TapQueryForm and the CliCmd display to accomodate Top
* Collate tap events based on the ID (src, dst, stream)
* Also refactor keying of req/rsp/end into requestInit/responseInit/responseEnd for clarity
* Use pod labels when present in top
* Fix bug where src/dst were switched in the Tap display table
This an initial implementation of the `linkerd top` command. This command launches an ncurses style tabular view of current requests (using data from tap). Most of the command line arguments are the same as tap and allow selecting the resource to inspect and filtering which requests to view.
Fixes#1283
Signed-off-by: Alex Leong <alex@buoyant.io>
Tap.jsx is really large and contains a lot of logic that pertains only to the Tap Query Form.
This PR tries to separate the concerns of the form and the query display from the main
Tap querying and rendering logic.
This will also allow us to easily reuse this form/CLI formatting for the Top page.
Changes in this PR:
* moves all the code for the form into its own component (TapQueryForm)
* moves the code that displays the current query into its own component (TapQueryCliCmd)
* formats the current tap query as the equivalent command line format that you
can paste into a terminal
Now that we have source metadata in tap events, we can display
the pod name in the UI instead of the IP. I've also added a popover
that shows deploy and pod info if we have it.
Also adds another table in the expanded row view to show all the
metadata we have. This table probably won't stick around forever,
but I'm just displaying all the data we have right now.
We have a new format for displaying errors in ErrorBanner.
When a websocket error occurred, we'd pass in text where ErrorBanner
expects and object. This PR puts the websocket errors in an object
Also clean up the display of the error by removing redundant text.
Problem:
We depend on the websocketRequestSent bool (renamed to
tapRequestInProgress in this branch) to determine whether the
start/stop button says start or stop. However, we don't change
this value in setState until we open the websocket connection
(which could take some time). This led to a delay in when you
press the Start button and when it changes colour.
Solution:
Set the state before waiting for the websocket to open, so the
button colour changes immediately and the form feels more responsive
Risha Mars
Dennis Adjei-Baah
Andrew Seigner
Alex Leong
Kevin Lingerfelt
Radu M
Alejandro Pedraza
Oliver Gould
Ben Lambert
Ivan Sim
Mathis Wiehl
Thomas Rampelberg
Sebastian Tiedtke