The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Similar to `kubectl --as`, global flag across all linkerd subcommands
which sets a `ImpersonationConfig` in the Kubernetes API config.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The heartbeat cronjob specified `restartPolicy: OnFailure`. In cases
where failure was non-transient, such as if a cluster did not have
internet access, this would continuously restart and fail.
Change the heartbeat cronjob to `restartPolicy: Never`, as a failed job
has no user-facing impact.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
* increased ha resource limits
* added resource limits to proxy when HA
* update golden files in cmd/main
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
* Adds more PSP restrictions
* Update test fixtures
* Updates PSP to be conditional on initContainer
- The proxy-init container runs as root and needs the PSP to allow this
user when there is an init container.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
kubectl introduced `-A` as a shorthand for `--all-namespaces` in
`v1.14.0`:
https://github.com/kubernetes/kubernetes/pull/72006
Update linkerd cli's `edges`, `get`, and `stat` commands to match this
convention.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
`linkerd check`, the web dashboard, and Grafana all perform version
checks to validate Linkerd is up to date. It's common for users to
seldom execute these codepaths. This makes it difficult to identify what
versions of Linkerd are currently in use and what environments it is
being run in, which helps prioritize testing and backports.
Introduce a `heartbeat` CronJob to the default Linkerd install. The
cronjob executes every 24 hours, starting from 5 minutes after
`linkerd install` is run.
Example check URL:
https://versioncheck.linkerd.io/version.json?
install-time=1562761177&
k8s-version=v1.15.0&
meshed-pods=8&
rps=3&
source=heartbeat&
uuid=cc4bb700-3314-426a-9f0f-ec588b9df020&
version=git-b97ee9f7
Fixes#2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The openAPIV3Schema validation in the ServiceProfiles CRD is very limited in what it can validate and is obviated by more sophisticated validation done by the validating admission controller. Therefore, we would like to remove the openAPIV3Schema validation to reduce the size and complexity of the CRD object.
To do so, we must also bump the version of the ServiceProfile custom resource from v1alpha1 to v1alpha2. This ensures that when the controller is upgraded, it will attempt to watch the v1alpha2 resource. If it cannot (because, for example, the controller pod started before the ServiceProfile CRD was updated and therefore the v1alpha2 version does not exist) then it will go into a crash loop backoff until it can. This essentially means that the controller will wait for the CRD to be upgraded to include v1alpha2 before it will start.
Bumping the version is necessary because if we did not, it would be possible for the controller to start before the CRD is updated (removing the validation). In this case, when the CRD is edited, the controller will lose its list watch on ServiceProfiles and will stop getting updates.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
When waiting for controller pods to be created or become ready, `linkerd check` doesn't offer any hints as to whether there has been an error (such as an ImagePullBackoff).
We add pod status to the output to make this more immediately obvious.
Fixes#2877
Signed-off-by: Alex Leong <alex@buoyant.io>
* Added Anti Affinity when HA is configured
* Move check to validate()
* Test output with anti-affinity when ha upgrade
* Add anti-affinity to identity deployment
* made host anti-affinity default when ha
* Define affinity template in a separate file
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When installing using some of the flags that persist in install, e.g
`linkerd install --ha`, and then doing `linkerd upgrade config` a nil
pointer error is thrown.
Fixes#3094
`newCmdUpgradeConfig()` was using passing `flags` as nil because
`linkerd upgrade config` doesn't expose any flags for the subcommand,
but turns out they're still needed down the call stack in
`setFlagsFromInstall` to reuse the flags persisted during install.
I also added a new unit test catching this.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
This PR improves the CLI output for `linkerd edges` to reflect the latest API
changes.
Source and destination namespaces for each edge are now shown by default. The
`MSG` column has been replaced with `Secured` and contains a green checkmark or
the reason for no identity. A new `-o wide` flag shows the identity of client
and server if known.
During operations with `linkerd stat` sometimes it's not clear the actual
pod status.
This commit introduces a method, to the `k8s`package, getting the pod status,
based on [`kubectl` logic](33a3e325f7/pkg/printers/internalversion/printers.go (L558-L640))
to expose the `STATUS` column for pods . Also, it changes the stat command
on the` cli` package adding a column when the resource type is a Pod.
Fixes#1967
Signed-off-by: Jonathan Juares Beber <jonathanbeber@gmail.com>
The existing `linkerd install` error message for existing resources was
shared with `linkerd check`. Given the different contexts, the messaging
made more sense for `linkerd check` than for `linkerd install`.
Modify the error messaging for `linkerd install` to print a bare list
of existing resources, and provide instructions for proceeding.
For example:
```bash
$ linkerd install
Unable to install the Linkerd control plane. It appears that there is an existing installation:
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-controller
clusterrole.rbac.authorization.k8s.io/linkerd-linkerd-identity
If you are sure you'd like to have a fresh install, remove these resources with:
linkerd install --ignore-cluster | kubectl delete -f -
Otherwise, you can use the --ignore-cluster flag to overwrite the existing global resources.
```
Fixes#3045
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
PR #2603 modified the web process to read the UUID from the
`linkerd-config` ConfigMap rather than from a command line flag. The
`linkerd check` command relied on that command line flag to retrieve the
UUID as part of its version check.
Modify `linkerd check` to correctly retrieve the UUID from
`linkerd-config`. Also refactor `linkerd-config` retrieval and parsing
code to be shared between healthcheck, install, and upgrade.
Relates to #2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Have `linkerd endpoints` use `Destination.Get`
Fixes#2885
We're refactoring `linkerd endpoints` so it hits
directly the `Destination.Get` endpoint, instead of relying on the
Discovery service.
For that, I've created a new `client.go` for Destination and added it to
the `APIClient` interface.
I've also added a `destinationClient` struct that mimics `tapClient`,
and whose common logic has been moved into `stream_client.go`.
Analogously, I added a `destinationServer` struct that mimics
`tapServer`.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Linkerd's CLI flags all match 1:1 with their `config.linkerd.io/*`
annotation counterparts, except `--enable-debug-sidecar`, which
corresponded to `config.linkerd.io/debug`. Additionally, the Linkerd
docs assume this 1:1 mapping.
Rename the `config.linkerd.io/debug` annotation to
`config.linkerd.io/enable-debug-sidecar`.
Relates to https://github.com/linkerd/website/issues/381
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
This change implements the DstOverrides feature of the destination profile API (aka traffic splitting).
We add a TrafficSplitWatcher to the destination service which watches for TrafficSplit resources and notifies subscribers about TrafficSplits for services that they are subscribed to. A new TrafficSplitAdaptor then merges the TrafficSplit logic into the DstOverrides field of the destination profile.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Introduce new checks to determine existence of global resources and the
'linkerd-config' config map.
* Update pre-check to check for existence of global resources
This ensures that multiple control planes can't be installed into
different namespaces.
* Update integration test clean-up script to delete psp and crd
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Simplify port-forwarding code
Simplifies the establishment of a port-forwarding by moving the common
logic into `PortForward.Init()`
Stemmed from this
[comment](https://github.com/linkerd/linkerd2/pull/2937#discussion_r295078800)
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Fixes#2927
Also moved `TestInstallSP` after `TestCheckPostInstall` so we're sure
the validating webhook is ready before installing a service profile.
Signed-off-by: Alejandro Pedraza Borrero <alejandro@buoyant.io>
When installing multiple control planes, the mutatingwebhookconfiguration of the first control plane gets overwritten by any subsequent control plane install. This is caused by the fixed name given to the mutatingwebhookconfiguration manifest at install time.
This commit adds in the namespace to the manifest so that there is a unique configuration for each control plane.
Fixes#2887
* Add control plane and CNI PSP and RBAC resources
* Add the '--linkerd-cni-enabled' flag to the multi-stage install subcommands
This flag ensures that the NET_ADMIN capability is omitted from the control
plane's PSP during 'install config' and the proxy-init containers aren't
injected during 'install control-plane'.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* If HA, set the webhooks failure policy to 'Fail'
I'm adding to the linkerd namespace a new label
`linkerd.io/is-control-plane: true` that is used in the webhook configs'
selector to skip the proxy injector for this namespace. This avoids
running into the timing issues described in #2852.
Fixes#2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
* Fix HA during upgrade
If we have a Linkerd installation with HA, and then we do `linkerd
upgrade` without specifying `--ha`, the replicas will get set back to 1,
yet the resource requests will keep their HA values.
Desired behavior: `linkerd install --ha` adds the `ha` value into the
linkerd-config, so it should be used during upgrade even if `--ha` is
not passed to `linkerd upgrade`.
Note we still can do `linkerd upgrade --ha=false` to disable HA.
This is a prerequesite to address #2852
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Added labels to webhook configurations in charts/
* Multiple replicas of proxy-injector and sp-validator in HA
* Use ControllerComponent template variable for webhookconfigurations
Signed-off-by: Tarun Pothulapati <tarunpothulapati@outlook.com>
When `linkerd edges` returns JSON, the data will now be sorted alphabetically by
SRC name, meaning edges will be returned in a consistent order. Logic in the CLI
`edges.go` has also been simplified. These changes should result in the Travis
CI builds passing consistently.
This commit refactors the changes introduced by #2842 where the debug
container spec is created in the 'cli' and 'pkg' packages. This change
follows the existing pattern of annotating the YAML in the CLI code,
and injecting the sidecar spec in the shared library.
Signed-off-by: Ivan Sim <ivan@buoyant.io>
Andrew Seigner
Kevin Leimkuhler
Tarun Pothulapati
Alejandro Pedraza
Cody Vandermyn
Alex Leong
arminbuerkle
Carol A. Scott
Jonathan Juares Beber
Ivan Sim
Andrew Seigner
Dennis Adjei-Baah
Dan