## edge-20.1.3
* CLI
* Introduced `linkerd check --pre --linkerd-cni-enabled`, used when the CNI
plugin is used, to check it has been properly installed before proceeding
with the control plane installation
* Added support for the `--as-group` flag so that users can impersonate
groups for Kubernetes operations (thanks @mayankshah160!)
* Controller
* Fixed an issue where an override of the Docker registry was not being
applied to debug containers (thanks @javaducky!)
* Added check for the Subject Alternate Name attributes to the API server
when access restrictions have been enabled (thanks @javaducky!)
* Added support for arbitrary pod labels so that users can leverage the
Linkerd provided Prometheus instance to scrape for their own labels
(thanks @daxmc99!)
* Fixed an issue with CNI config parsing
Signed-off-by: Kevin Leimkuhler <kevin@kleimkuhler.com>
This allows for users of Linkerd to leverage the Prometheus instance
deployed by the mesh for their metric needs. With support for pod labels
outside of the Linkerd metrics users are able to scrape metrics
based upon their own labels.
Signed-off-by: Dax McDonald <dax@rancher.com>
**Subject**
Fixes bug where override of Docker registry was not being applied to debug containers (#3851)
**Problem**
Overrides for Docker registry are not being applied to debug containers and provide no means to correct the image.
**Solution**
This update expands the `data.proxy` configuration section within the Linkerd `ConfigMap` to maintain the overridden image name for debug containers at _install_-time similar to handling of the `proxy` and `proxyInit` images.
This change also enables the further override option of the registry for debug containers at _inject_-time given utilization of the `--registry` CLI option.
**Validation**
Several new unit tests have been created to confirm functionality. In addition, the following workflows were run through:
### Standard Workflow with Custom Registry
This workflow installs Linkerd control plane based upon a custom registry, then injecting the debug sidecar into a service.
* Start with a k8s instance having no Linkerd installation
* Build all images locally using `bin/docker-build`
* Create custom tags (using same version) for generated images, e.g. `docker tag gcr.io/linkerd-io/debug:git-a4ebecb6 javaducky.com/linkerd-io/debug:git-a4ebecb6`
* Install Linkerd with registry override `bin/linkerd install --registry=javaducky.com/linkerd-io | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap now contains the debug image name, pull policy, and version within the `data.proxy` section
* Request injection of the debug image into an available container. I used the Emojivoto voting service as described in https://linkerd.io/2/tasks/using-the-debug-container/ as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Once the deployment creates a new pod for the service, inspection should show that the container now includes the "linkerd-debug" container name based on the applicable override image seen previously within the ConfigMap
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Custom Registry Override at Injection
This builds upon the “Standard Workflow with Custom Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=gcr.io/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Standard Workflow with Default Registry
This workflow is the typical workflow which utilizes the standard Linkerd image registry.
* Uninstall the Linkerd control plane using `bin/linkerd install --ignore-cluster | kubectl delete -f -` as described at https://linkerd.io/2/tasks/uninstall/
* Clean the Emojivoto environment using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl delete -f -` then reinstall using `curl -sL https://run.linkerd.io/emojivoto.yml | kubectl apply -f -`
* Perform standard Linkerd installation as `bin/linkerd install | kubectl apply -f -`
* Once Linkerd has been fully initialized, you should be able to confirm that the `linkerd-config` ConfigMap references the default debug image of `gcr.io/linkerd-io/debug` within the `data.proxy` section
* Request injection of the debug image into an available container as `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar - | kubectl apply -f -`
* Debugging can also be verified by viewing debug container logs as `kubectl -n emojivoto logs deploy/voting linkerd-debug -f`
* Modifying the `config.linkerd.io/enable-debug-sidecar` annotation, setting to “false”, should show that the pod will be recreated no longer running the debug container.
### Overriding the Default Registry at Injection
This workflow builds upon the “Standard Workflow with Default Registry” by overriding the Docker registry utilized for the debug container at the time of injection.
* “Clean” the Emojivoto voting service by removing any Linkerd annotations from the deployment
* Request injection similar to before, except provide the `--registry` option as in `kubectl -n emojivoto get deploy/voting -o yaml | bin/linkerd inject --enable-debug-sidecar --registry=javaducky.com/linkerd-io - | kubectl apply -f -`
* Inspection of the deployment config should now show the override annotation for `config.linkerd.io/debug-image` having the debug container from the new registry. Viewing the running pod should show that the `linkerd-debug` container was injected and running the correct image. Of note, the proxy and proxy-init images are still running the “original” override images.
* As before, modifying the `config.linkerd.io/enable-debug-sidecar` annotation setting to “false”, should show that the pod will be recreated no longer running the debug container.
Fixes issue #3851
Signed-off-by: Paul Balogh javaducky@gmail.com
* Enable mixed configuration of skip-[inbound|outbound]-ports using port numbers and ranges (#3752)
* included tests for generated output given proxy-ignore configuration options
* renamed "validate" method to "parseAndValidate" given mutation
* updated documentation to denote inclusiveness of ranges
* Updates for expansion of ignored inbound and outbound port ranges to be handled by the proxy-init rather than CLI (#3766)
This change maintains the configured ports and ranges as strings rather than unsigned integers, while still providing validation at the command layer.
* Bump versions for proxy-init to v1.3.0
Signed-off-by: Paul Balogh <javaducky@gmail.com>
The Kubernetes docs recommend a common set of labels for resources:
https://kubernetes.io/docs/concepts/overview/working-with-objects/common-labels/#labels
Add the following 3 labels to all control-plane workloads:
```
app.kubernetes.io/name: controller # or destination, etc
app.kubernetes.io/part-of: Linkerd
app.kubernetes.io/version: edge-X.Y.Z
```
Fixes#3816
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* No need for `processYAML()` in `install`
Since `install` uses helm to do its proxy injection, there's no need to
call `processYAML`. This also fixes an issue discovered in #3687 where
we started supporting injection of cronjobs, and even though `linkerd`'s
namespace is flagged to skip automatic injection it was being injected.
This replaces #3773 as it's a much more simpler approach.
* Replaced `uuid` with `uid` from linkerd-config resource
Fixes#3621
Removed the old `uuid` for identifying linkerd installations, and
replaced it with the `uid` property from the `linkerd-config` ConfigMap.
I tested that this `uid` remains the same by updating the config and
also upgrading linkerd, using both the CLI and Helm.
Note that this required granting `linkerd-web` RBAC access to the
`linkerd-config` Config.
I also added an integration test to verify the stability of the uid.
* DNS rebinding protection for the dashboard
Fixes#3083 and replacement for #3629
This adds a new parameter to the `linkerd-web` container `enforcedHost`
that establishes the regexp that the Host header must enforce, otherwise
it returns an error.
This parameter will be hard-coded for now, in `linkerd-web`'s deployment
yaml.
Note this also protects the dashboard because that's proxied from
`linkerd-web`.
Also note this means the usage of `linkerd dashboard --address` will
require the user to change that parameter in the deployment yaml (or
have Kustomize do it).
How to test:
- Run `linkerd dashboard`
- Go to http://rebind.it:8080/manager.html and change the target port to
50750
- Click on “Start Attack” and wait for a minute.
- The response from the dashboard will be returned, showing an 'Invalid
Host header' message returned by the dashboard. If the attack would have
succeeded then the dashboard's html would be shown instead.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Add support for --identity-issuer-mode flag to install cmd
* Change flag to be a bool
* Read correct data form identity when external issuer is used
* Add ability for identity service to dynamically reload certs
* Fix failing tests
* Minor refactor
* Load trust anchors from identity issuer secret
* Make identity service actually watch for issuer certs updates
* Add some testing around cmd line identity options validation
* Add tests ensuring that identity service loads issuer
* Take into account external-issuer flag during upgrade + tests
* Fix failing upgrade test
* Address initial review feedback
* Address further review feedback on cli and helm
* Do not persist --identity-external-issuer
* Some improvements to identitiy service
* Bring back persistane of external issuer flag
* Address more feedback
* Update dockerfiles shas
* Publishing k8s events on issuer certs rotation
* Ensure --ignore-cluster+external issuer is not supported
* Update go-deps shas
* Transition to identity issuer scheme based configuration
* Use k8s consts for secret file names
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* Re-add the destination container to the controller spec
This fix is necessary to avoid data plane downtime during an upgrade to
stable-2.6. All existing older proxies will continue to send requests to
this destination container, until the data plane is restarted.
On restart, the new pods will start forwarding their requests to the new
linkerd-dst service.
* Use the 2.6 destination service fqdn
* Fixed unit tests
* Fix integration test failure
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Update prometheus cadvisor config to only keep container resources metrics
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Drop unused large metric
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Siggy's feedback
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Fix unit test
Signed-off-by: Ivan Sim <ivan@buoyant.io>
* Trim certs and keys in the Helm charts
Fixes#3419
When installing through the CLI the installation will fail if the certs
are malformed, so this only concerns the Helm templates.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Set custom cluster domain in GetServiceProfileFor
* Set custom cluster domain in tap server
Move fetching cluster domain for tap server to cmd main
* Handle fetchting cluster domain errors separately
* Use custom cluster domain for traffic split adaptor
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
* Rename template-values.go
* Define new constructor of charts.Values type
* Move all Helm values related code to the pkg/charts package
* Bump dependency
* Use '/' in filepath to remain compatible with VFS requirement
* Add unit test to verify Helm YAML output
* Alejandro's feedback
* Add unit test for Helm YAML validation (HA)
Signed-off-by: Ivan Sim <ivan@buoyant.io>
### Summary
After the addition of the tap APIServer, all the logic related to tap in the public API no longer needs to be there. The servers and clients that are created but not used, as well as all the old testing infrastrucure related to tap can be removed.
This deprecates TapByResource and therefore required an update to the protobuf files with `bin/protoc-go.sh`. While the change to deprecate this method was extremely small, a lot of protobuf fils were updated in the process. These changes to the code and protobuf files should probably remain coupled since `TapByResource` is officially deprecated in the public API, but a majority of the additions/deletions are related to those files.
This draft passes `go test` as well as a local run of the integration tests.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
* Delete symlink to old Helm chart
* Update 'install' code to use common Helm template structs
* Remove obsolete TLS assets functions.
These are now handle by Helm functions inside the templates
* Read defaults from values.yaml and values-ha.yaml
* Ensure that webhooks TLS assets are retained during upgrade
* Fix a few bugs in the Helm templates (see bullet points):
* Merge the way the 'install' ha and non-ha options are handled into one function
* Honor the 'NoInitContainer' option in the components templates
* Control plane mTLS will not be disabled if identity context in the
config map is empty. The data plane mTLS will still be automatically disabled
if the context is nil.
* Resolve test failures from rebase with master
* Fix linter issues
* Set service account mount path read-only field
* Add TLS variables of the webhooks and tap to values.yaml
During upgrade, these secrets are preserved to ensure they remain synced
wih the CA bundle in the webhook configurations. These Helm variables are used
to override the defaults in the templates.
* Remove obsolete 'chart' folder
* Fix bugs in templates
* Handle missing webhooks and tap TLS assets during upgrade
When upgrading from an older version that don't have these secrets, fallback to let Helm
create them by creating an empty charts.TLS struct.
* Revert the selector labels of webhooks to be compatible with that in 2.4
In 2.4, the proxy injector and profile validator webhooks already have their selector labels defined.
Since these attributes are immutable, the recent change to these selectors introduced by the Helm chart work will cause upgrade to fail.
* Alejandro's feedback
* Siggy's feedback
* Removed redundant unexported custom types
Signed-off-by: Ivan Sim <ivan@buoyant.io>
The Tap Service enabled tapping of any meshed pod, regardless of user
privilege.
This change introduces a new Tap APIService. Kubernetes provides
authentication and authorization of Tap requests, and then forwards
requests to a new Tap APIServer, which implements a Kubernetes
aggregated APIServer. The Tap APIServer authenticates the client TLS
from Kubernetes, and authorizes the user via a SubjectAccessReview.
This change also modifies the `linkerd tap` command to make requests
against the new APIService.
The Tap APIService implements these Kubernetes-style endpoints:
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/tap
POST /apis/tap.linkerd.io/v1alpha1/watch/namespaces/:ns/:res/:name/tap
GET /apis
GET /apis/tap.linkerd.io
GET /apis/tap.linkerd.io/v1alpha1
GET /healthz
GET /healthz/log
GET /healthz/ping
GET /metrics
GET /openapi/v2
GET /version
Users authorize to the new `tap.linkerd.io/v1alpha1` via RBAC. Only the
`watch` verb is supported. Access is also available via subresources
such as `deployments/tap` and `pods/tap`.
This change introduces the following resources into the default Linkerd
install:
- Global
- APIService/v1alpha1.tap.linkerd.io
- ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator
- `linkerd` namespace:
- Secret/linkerd-tap-tls
- `kube-system` namespace:
- RoleBinding/linkerd-linkerd-tap-auth-reader
Tasks not covered by this PR:
- `linkerd top`
- `linkerd dashboard`
- `linkerd profile --tap`
- removal of the unauthenticated tap controller
Fixes#2725, #3162, #3172
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The heartbeat cronjob specified `restartPolicy: OnFailure`. In cases
where failure was non-transient, such as if a cluster did not have
internet access, this would continuously restart and fail.
Change the heartbeat cronjob to `restartPolicy: Never`, as a failed job
has no user-facing impact.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
### Summary
In order for Pods' tap servers to start authorizing tap clients, the tap server
must be able to check client names against the expected tap service name.
This change injects the `LINKERD2_PROXY_TAP_SVC_NAME` into proxy PodSpecs.
### Details
The tap servers on the individual resources being tapped should be able to
verify that the client is the tap service. The `LINKERD2_PROXY_TAP_SVC_NAME` is
now injected as an environment variable in the proxies so that it can check this
value against the client name of the TLS connection. Currently, this environment
will go unused. There is an open PR (linkerd2-proxy#290) to use this variable in
the proxy, but this is *not* dependent on that merging first.
Note: The variable is not injected if tap is disabled.
### Testing
Test output has been updated with the newly injected environment variable.
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
`linkerd check`, the web dashboard, and Grafana all perform version
checks to validate Linkerd is up to date. It's common for users to
seldom execute these codepaths. This makes it difficult to identify what
versions of Linkerd are currently in use and what environments it is
being run in, which helps prioritize testing and backports.
Introduce a `heartbeat` CronJob to the default Linkerd install. The
cronjob executes every 24 hours, starting from 5 minutes after
`linkerd install` is run.
Example check URL:
https://versioncheck.linkerd.io/version.json?
install-time=1562761177&
k8s-version=v1.15.0&
meshed-pods=8&
rps=3&
source=heartbeat&
uuid=cc4bb700-3314-426a-9f0f-ec588b9df020&
version=git-b97ee9f7
Fixes#2961
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
* Allow custom cluster domain in destination watcher
The change relaxes the constrains of an authority requiring a
`svc.cluster.local` suffix to only require `svc` as third part.
A unit test could be added though the destination/server and endpoint
watcher already test this behaviour.
* Update proto to allow setting custom cluster domain
Update golden templates
* Allow setting custom domain in grpc, web server
* Remove cluster domain flags from web srv and public api
* Set defaultClusterDomain in validateAndBuild if none is set
Signed-off-by: Armin Buerkle <armin.buerkle@alfatraining.de>
The patch provided by @ihcsim applies correct values for the securityContext during injection, namely: `allowPrivilegeEscalation = false`, `readOnlyRootFilesystem = true`, and the capabilities are copied from the primary container. Additionally, the proxy-init container securityContext has been updated with appropriate values.
Signed-off-by: Cody Vandermyn <cody.vandermyn@nordstrom.com>
Split proxy-init into separate repo
Fixes#2563
The new repo is https://github.com/linkerd/linkerd2-proxy-init, and I
tagged the latest there `v1.0.0`.
Here, I've removed the `/proxy-init` dir and pinned the injected
proxy-init version to `v1.0.0` in the injector code and tests.
`/cni-plugin` depends on proxy-init, so I updated the import paths
there, and could verify CNI is still working (there is some flakiness
but unrelated to this PR).
For consistency, I added a `--init-image-version` flag to `linkerd
inject` along with its corresponding override config annotation.
Signed-off-by: Alejandro Pedraza <alejandro@buoyant.io>
* Update helm charts to include webhooks config and TLS secret
* Update the webhooks to read the secret cert and key
* Update webhooks to not recreate config on restart
* Ensure upgrade preserve existing secrets
* Revert the change to rename the webhook configs
The renaming change breaks upgrade, where the new webhook configs conflict with
the existing ones. The older resources aren't deleted during upgrade because
they are dynamically created.
* Make the secret volume read-only
* Remove unnecessary exported getter functions
* Remove obsolete mwc and vwc templates
Signed-off-by: Ivan Sim <ivan@buoyant.io>
All ServiceAccounts are intended to be grouped together with other RBAC
resources, particularly for `linkerd install config` output. Grafana and
Web ServiceAccounts were still included with their respective
Deployments.
Group Grafana and Web ServiceAccounts with other RBAC resources.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Kevin Leimkuhler
Dax McDonald
Paul Balogh
Alex Leong
Tarun Pothulapati
Andrew Seigner
Alejandro Pedraza
Zahari Dichev
Ivan Sim
Bruno M. Custódio
arminbuerkle
cpretzer
Kevin Leimkuhler
Thomas Rampelberg
Andrew Seigner
Cody Vandermyn
Dennis Adjei-Baah