* Release notes for edge-19.10.4
Signed-off-by: zaharidichev <zaharidichev@gmail.com>
* updates based on reviews
Signed-off-by: Charles Pretzer <charles@buoyant.io>
## edge-19.9.4
This edge release introduces a redesigned sidebar in dashboard! The goal of the
redesign was to reduce load on Prometheus and simplify navigation by providing
top-level views centered around namespaces and workloads.
* CLI
* Introduced a new `--cluster-domain` flag to the `linkerd install` command
that allows setting a custom cluster domain (thanks @arminbuerkle!)
* Fixed the `linkerd endpoints` command to use the correct Destination API
address (thanks @Pothulapati!)
* Added `--disable-heartbeat` flag for `linkerd` `install|upgrade` commands
* Controller
* Instrumented the proxy-injector to provide additional metrics about
injection (thanks @Pothulapati!)
* Added support for `config.linkerd.io/admission-webhooks: disabled` label on
namespaces so that the pods creation events in these namespaces are ignored
by the proxy injector; this fixes situations in HA deployments where the
proxy-injector is installed in `kube-system` (thanks @hasheddan!)
* Web UI
* Workloads are now viewed by namespace, with an "All Namespaces" option, to
improve dashboard performance
* Proxy
* Added experimental distributed tracing support
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
This edge release adds traffic splits into the Linkerd dashboard as well as a
variety of other improvements.
* CLI
* Improved the error message when the CLI cannot connect to Kubernetes (thanks
@alenkacz!)
* Added `--address` flag to `linkerd dashboard` (thanks @bmcstdio!)
* Controller
* Fixed an issue where the proxy-injector had insufficient RBAC permissions
* Added support for disabling the heartbeat cronjob (thanks @kevtaylor!)
* Proxy
* Decreased proxy Docker image size by removing bundled debug tools
* Fixed an issue where the incorrect content-length could be set for GET
requests with bodies
* Web UI
* Added trafficsplits as a resource to the dashboard, including a trafficsplit
detail page
* Internal
* Added support for Kubernetes 1.16
Signed-off-by: Alex Leong <alex@buoyant.io>
## edge-19.8.7
* CLI
* Added a global `--cluster-domain` flag to `linkerd install` to allow
installing Linkerd into a Kubernetes cluster that uses a base domain other
than `cluster.local.` (thanks @arminbuerkle!)
* Web UI
* Fixed an issue that caused unnecessary Prometheus queries, reducing load on
Prometheus
* Control Plane
* Added Kubernetes events (and log lines) when the proxt injector injects a
deployment, and when injection is skipped
* Proxy
* Changed the proxy to require the `LINKERD2_PROXY_DESTINATION_SVC_ADDR`
environment variable when starting up
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
**Significant Update**
This edge release introduces a new tap APIService. The Kubernetes apiserver
authenticates the requesting tap user and then forwards tap requests to the new
tap APIServer. The `linkerd tap` command now makes requests against the
APIService.
With this release, users must be authorized via RBAC to use the `linkerd tap`
command. Specifically `linkerd tap` requires the `watch` verb on all resources
in the `tap.linkerd.io/v1alpha1` APIGroup. More granular access is also
available via sub-resources such as `deployments/tap` and `pods/tap`.
* CLI
* Added a check to the `linkerd check` command to validate the user has
privileges necessary to create CronJobs
* Introduced the `linkerd --as` flag which allows users to impersonate another
user for Kubernetes operations
* The `linkerd tap` command now makes requests against the tap APIService
* Controller
* Added HTTP security headers on all dashboard responses
* Fixed nil pointer dereference in the destination service when an endpoint
does not have a `TargetRef`
* Added resource limits when HA is enabled
* Added RSA support to TLS libraries
* Updated the destination service to return `InvalidArgument` for external
name services so that the proxy does not immediately fail the request
* The `l5d-require-id` header is now set on tap requests so that a connection
is established over TLS
* Introduced the `APIService/v1alpha1.tap.linkerd.io` global resource
* Introduced the `ClusterRoleBinding/linkerd-linkerd-tap-auth-delegator`
global resource
* Introduced the `Secret/linkerd-tap-tls` resource into the `linkerd`
namespace
* Introduced the `RoleBinding/linkerd-linkerd-tap-auth-reader` resource into
the `kube-system` namespace
* Proxy
* Added the `LINKERD2_PROXY_TAP_SVC_NAME` environment variable so that the tap
server attempts to authorize client identities
* Internal
* Replaced `dep` with Go modules for dependency management
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
## stable-2.4.0
This release adds traffic splitting functionality, support for the Kubernetes
Service Mesh Interface (SMI), graduates high-availability support out of
experimental status, and adds a tremendous list of other improvements,
performance enhancements, and bug fixes.
Linkerd's new traffic splitting feature allows users to dynamically control the
percentage of traffic destined for a service. This powerful feature can be used
to implement rollout strategies like canary releases and blue-green deploys.
Support for the [Service Mesh Interface](https://smi-spec.io) (SMI) makes it
easier for ecosystem tools to work across all service mesh implementations.
Along with the introduction of optional install stages via the `linkerd install
config` and `linkerd install control-plane` commands, the default behavior of
the `linkerd inject` command only adds annotations and defers injection to the
always-installed proxy injector component.
Finally, there have been many performance and usability improvements to the
proxy and UI, as well as production-ready features including:
* A new `linkerd edges` command that provides fine-grained observability into
the TLS-based identity system
* A `--enable-debug-sidecar` flag for the `linkerd inject` command that improves
debugging efforts
Linkerd recently passed a CNCF-sponsored security audit! Check out the in-depth
report [here](https://github.com/linkerd/linkerd2/blob/master/SECURITY_AUDIT.pdf).
To install this release, run: `curl https://run.linkerd.io/install | sh`
**Upgrade notes**: Use the `linkerd upgrade` command to upgrade the control
plane. This command ensures that all existing control plane's configuration and
mTLS secrets are retained. For more details, please see the [upgrade
instructions](https://linkerd.io/2/tasks/upgrade/#upgrade-notice-stable-2-4-0) for more details.
**Special thanks to**: @alenkacz, @codeman9, @dwj300, @jackprice, @liquidslr
@matej-g, @Pothulapati, @zaharidichev,
**Full release notes**:
* CLI
* **Breaking Change** Removed the `--proxy-auto-inject` flag, as the proxy
injector is now always installed
* **Breaking Change** Replaced the `--linkerd-version` flag with the
`--proxy-version` flag in the `linkerd install` and `linkerd upgrade`
commands, which allows setting the version for the injected proxy sidecar
image, without changing the image versions for the control plane
* Introduced install stages: `linkerd install config` and `linkerd install
control-plane`
* Introduced upgrade stages: `linkerd upgrade config` and `linkerd upgrade
control-plane`
* Introduced a new `--from-manifests` flag to `linkerd upgrade` allowing
manually feeding a previously saved output of `linkerd install` into the
command, instead of requiring a connection to the cluster to fetch the
config
* Introduced a new `--manual` flag to `linkerd inject` to output the proxy
sidecar container spec
* Introduced a new `--enable-debug-sidecar` flag to `linkerd inject`, that
injects a debug sidecar to inspect traffic to and from the meshed pod
* Added a new check for unschedulable pods and PSP issues (thanks,
@liquidslr!)
* Disabled the spinner in `linkerd check` when running without a TTY
* Ensured the ServiceAccount for the proxy injector is created before its
Deployment to avoid warnings when installing the proxy injector (thanks,
@dwj300!)
* Added a `linkerd check config` command for verifying that `linkerd install
config` was successful
* Improved the help documentation of `linkerd install` to clarify flag usage
* Added support for private Kubernetes clusters by changing the CLI to connect
to the control plane using a port-forward (thanks, @jackprice!)
* Fixed `linkerd check` and `linkerd dashboard` failing when any control plane
pod is not ready, even when multiple replicas exist (as in HA mode)
* **New** Added a `linkerd edges` command that shows the source and
destination name and identity for proxied connections, to assist in
debugging
* Tap can now be disabled for specific pods during injection by using the
`--disable-tap` flag, or by using the `config.linkerd.io/disable-tap`
annotation
* Introduced pre-install healthcheck for clock skew (thanks, @matej-g!)
* Added a JSON option to the `linkerd edges` command so that output is
scripting friendly and can be parsed easily (thanks @alenkacz!)
* Fixed an issue when Linkerd is installed with `--ha`, running `linkerd
upgrade` without `--ha` will disable the high availability control plane
* Fixed an issue with `linkerd upgrade` where running without `--ha` would
unintentionally disable high availability features if they were previously
enabled
* Added a `--init-image-version` flag to `linkerd inject` to override the
injected proxy-init container version
* Added the `--linkerd-cni-enabled` flag to the `install` subcommands so that
`NET_ADMIN` capability is omitted from the CNI-enabled control plane's PSP
* Updated `linkerd check` to validate the caller can create
`PodSecurityPolicy` resources
* Added a check to `linkerd install` to prevent installing multiple control
planes into different namespaces avoid conflicts between global resources
* Added support for passing a URL directly to `linkerd inject` (thanks
@Pothulapati!)
* Added more descriptive output to the `linkerd check` output for control
plane ReplicaSet readiness
* Refactored the `linkerd endpoints` to use the same interface as used by the
proxy for service discovery information
* Fixed a bug where `linkerd inject` would fail when given a path to a file
outside the current directory
* Graduated high-availability support out of experimental status
* Modified the error message for `linkerd install` to provide instructions for
proceeding when an existing installation is found
* Controller
* Added Go pprof HTTP endpoints to all control plane components' admin servers
to better assist debugging efforts
* Fixed bug in the proxy injector, where sporadically the pod workload owner
wasn't properly determined, which would result in erroneous stats
* Added support for a new `config.linkerd.io/disable-identity` annotation to
opt out of identity for a specific pod
* Fixed pod creation failure when a `ResourceQuota` exists by adding a default
resource spec for the proxy-init init container
* Fixed control plane components failing on startup when the Kubernetes API
returns an `ErrGroupDiscoveryFailed`
* Added Controller Component Labels to the webhook config resources (thanks,
@Pothulapati!)
* Moved the tap service into its own pod
* **New** Control plane installations now generate a self-signed certificate
and private key pair for each webhook, to prepare for future work to make
the proxy injector and service profile validator HA
* Added the ` config.linkerd.io/enable-debug-sidecar` annotation allowing the
`--enable-debug-sidecar` flag to work when auto-injecting Linkerd proxies
* Added multiple replicas for the `proxy-injector` and `sp-validator`
controllers when run in high availability mode (thanks to @Pothulapati!)
* Defined least privilege default security context values for the proxy
container so that auto-injection does not fail (thanks @codeman9!)
* Default the webhook failure policy to `Fail` in order to account for
unexpected errors during auto-inject; this ensures uninjected applications
are not deployed
* Introduced control plane's PSP and RBAC resources into Helm templates; these
policies are only in effect if the PSP admission controller is enabled
* Removed `UPDATE` operation from proxy-injector webhook because pod mutations
are disallowed during update operations
* Default the mutating and validating webhook configurations `sideEffects`
property to `None` to indicate that the webhooks have no side effects on
other resources (thanks @Pothulapati!)
* Added support for the SMI TrafficSplit API which allows users to define
traffic splits in TrafficSplit custom resources
* Added the `linkerd.io/control-plane-ns` label to all Linkerd resources
allowing them to be identified using a label selector
* Added Prometheus metrics for the Kubernetes watchers in the destination
service for better visibility
* Proxy
* Replaced the fixed reconnect backoff with an exponential one (thanks,
@zaharidichev!)
* Fixed an issue where load balancers can become stuck
* Added a dispatch timeout that limits the amount of time a request can be
buffered in the proxy
* Removed the limit on the number of concurrently active service discovery
queries to the destination service
* Fix an epoll notification issue that could cause excessive CPU usage
* Added the ability to disable tap by setting an env var (thanks,
@zaharidichev!)
* Changed the proxy's routing behavior so that, when the control plane does
not resolve a destination, the proxy forwards the request with minimal
additional routing logic
* Fixed a bug in the proxy's HPACK codec that could cause requests with very
large header values to hang indefinitely
* Fixed a memory leak that can occur if an HTTP/2 request with a payload ends
before the entire payload is sent to the destination
* The `l5d-override-dst` header is now used for inbound service profile
discovery
* Added errors totals to `response_total` metrics
* Changed the load balancer to require that Kubernetes services are resolved
via the control plane
* Added the `NET_RAW` capability to the proxy-init container to be compatible
with `PodSecurityPolicy`s that use `drop: all`
* Fixed the proxy rejecting HTTP2 requests that don't have an `:authority`
* Improved idle service eviction to reduce resource consumption for clients
that send requests to many services
* Fixed proxied HTTP/2 connections returning 502 errors when the upstream
connection is reset, rather than propagating the reset to the client
* Changed the proxy to treat unexpected HTTP/2 frames as stream errors rather
than connection errors
* Fixed a bug where DNS queries could persist longer than necessary
* Improved router eviction to remove idle services in a more timely manner
* Fixed a bug where the proxy would fail to process requests with obscure
characters in the URI
* Web UI
* Added the Font Awesome stylesheet locally; this allows both Font Awesome and
Material-UI sidebar icons to display consistently with no/limited internet
access (thanks again, @liquidslr!)
* Removed the Authorities table and sidebar link from the dashboard to prepare
for a new, improved dashboard view communicating authority data
* Fixed dashboard behavior that caused incorrect table sorting
* Removed the "Debug" page from the Linkerd dashboard while the functionality
of that page is being redesigned
* Added an Edges table to the resource detail view that shows the source,
destination name, and identity for proxied connections
* Improved UI for Edges table in dashboard by changing column names, adding a
"Secured" icon and showing an empty Edges table in the case of no returned
edges
* Internal
* Known container errors were hidden in the integration tests; now they are
reported in the output without having the tests fail
* Fixed integration tests by adding known proxy-injector log warning to tests
* Modified the integration test for `linkerd upgrade` in order to test
upgrading from the latest stable release instead of the latest edge and
reflect the typical use case
* Moved the proxy-init container to a separate `linkerd/proxy-init` Git
repository
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
## edge-19.7.3
* CLI
* Graduated high-availability support out of experimental status
* Modified the error message for `linkerd install` to provide instructions for
proceeding when an existing installation is found
* Controller
* Added Prometheus metrics for the Kubernetes watchers in the destination
service for better visibility
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
* CLI
* Refactored the `linkerd endpoints` to use the same interface as used by the
proxy for service discovery information
* Fixed a bug where `linkerd inject` would fail when given a path to a file
outside the current directory
* Proxy
* Fixed a bug where DNS queries could persist longer than necessary
* Improved router eviction to remove idle services in a more timely manner
* Fixed a bug where the proxy would fail to process requests with obscure
characters in the URI
Signed-off-by: Alex Leong <alex@buoyant.io>
* CLI
* Added more descriptive output to the `linkerd check` output for control
plane ReplicaSet readiness
* **Breaking change** Renamed `config.linkerd.io/debug` annotation to
`config.linkerd.io/enable-debug-sidecar`, to match the
`--enable-debug-sidecar` CLI flag that sets it
* Fixed a bug in `linkerd edges` that caused incorrect identities to be
displayed when requests were sent from two or more namespaces
* Controller
* Added the `linkerd.io/control-plane-ns` label to the SMI Traffic Split CRD
* Proxy
* Fixed proxied HTTP/2 connections returning 502 errors when the upstream
connection is reset, rather than propagating the reset to the client
* Changed the proxy to treat unexpected HTTP/2 frames as stream errors rather
than connection errors
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
## edge-19.6.4
This release adds support for the SMI [Traffic Split](https://github.com/deislabs/smi-spec/blob/master/traffic-split.md)
API. Creating a TrafficSplit resource will cause Linkerd to split traffic
between the specified backend services. Please see [the spec](https://github.com/deislabs/smi-spec/blob/master/traffic-split.md)
for more details.
* CLI
* Added a check to `install` to prevent installing multiple control planes
into different namespaces
* Added support for passing a URL directly to `linkerd inject` (thanks
@Pothulapati!)
* Added the `--all-namespaces` flag to `linkerd edges`
* Controller
* Added support for the SMI TrafficSplit API which allows users to define
traffic splits in TrafficSplit custom resources
* Web UI
* Improved UI for Edges table in dashboard by changing column names, adding a
"Secured" icon and showing an empty Edges table in the case of no returned
edges
Signed-off-by: Alex Leong <alex@buoyant.io>
## edge-19.6.3
* CLI
* Updated `linkerd check` to validate the caller can create
`PodSecurityPolicy` resources
* Controller
* Default the mutating and validating webhook configurations `sideEffects`
property to `None` to indicate that the webhooks have no side effects on
other resources (thanks @Pothulapati!)
* Proxy
* Added the `NET_RAW` capability to the proxy-init container to be compatible
with `PodSecurityPolicy`s that use `drop: all`
* Fixed the proxy rejecting HTTP2 requests that don't have an `:authority`
* Improved idle service eviction to reduce resource consumption for clients
that send requests to many services
* Web UI
* Removed the "Debug" page from the Linkerd dashboard while the functionality
of that page is being redesigned
* Added an Edges table to the resource detail view that shows the source,
destination name, and identity for proxied connections
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
## edge-19.6.2
* CLI
* Added the `--linkerd-cni-enabled` flag to the `install` subcommands so that
`NET_ADMIN` capability is omitted from the CNI-enabled control plane's PSP
* Controller
* Default to least-privilege security context values for the proxy container
so that auto-inject does not fail on restricted PSPs (thanks @codeman9!)
* Defined least privilege default security context values for the proxy
container so that auto-injection does not fail on (thanks @codeman9!)
* Default the webhook failure policy to `Fail` in order to account for
unexpected errors during auto-inject; this ensures uninjected applications
are not deployed
* Introduced control plane's PSP and RBAC resources into Helm templates;
these policies are only in effect if the PSP admission controller is
enabled
* Fixed MWC namespace value so that when installing multiple control planes,
there is a unique configuration for each one
* Removed `UPDATE` operation from proxy-injector webhook because pod
mutations are disallowed during update operations
* Proxy
* The `l5d-override-dst` header is now used for inbound service profile
discovery
* Include errors in `response_total` metrics
* Changed the load balancer to require that Kubernetes services are resolved
via the control plane
* Web UI
* Fixed dashboard behavior that caused incorrect table sorting
Signed-off-by: Kevin Leimkuhler <kleimkuhler@icloud.com>
## edge-19.6.1
* CLI
* Fixed an issue where, when Linkerd is installed with `--ha`, running
`linkerd upgrade` without `--ha` will disable the high availability
control plane
* Added a `--init-image-version` flag to `linkerd inject` to override the
injected proxy-init container version
* Controller
* Added multiple replicas for the `proxy-injector` and `sp-validator`
controllers when run in high availability mode (thanks to @Pothulapati!)
* Proxy
* Fixed a memory leak that can occur if an HTTP/2 request with a payload
ends before the entire payload is sent to the destination
* Internal
* Moved the proxy-init container to a separate `linkerd/proxy-init` Git
repository
## stable-2.3.2
This stable release fixes a memory leak in the proxy.
To install this release, run: `curl https://run.linkerd.io/install | sh`
**Full release notes**:
* Proxy
* Fixed a memory leak that can occur if an HTTP/2 request with a payload
ends before the entire payload is sent to the destination
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
## edge-19.5.4
* CLI
* Added a JSON option to the `linkerd edges` command so that output is
scripting friendly and can be parsed easily (thanks @alenkacz!)
* Controller
* **New** Control plane installations now generate a self-signed certificate
and private key pair for each webhook, to prepare for future work to make
the proxy injector and service profile validator HA
* Added a debug container annotation, allowing the `--enable-debug-sidecar`
flag to work when auto-injecting Linkerd proxies
* Proxy
* Changed the proxy's routing behavior so that, when the control plane does
not resolve a destination, the proxy forwards the request with minimal
additional routing logic
* Fixed a bug in the proxy's HPACK codec that could cause requests with very
large header values to hang indefinitely
* Web UI
* Removed the Authorities table and sidebar link from the dashboard to prepare
for a new, improved dashboard view communicating authority data
* Internal
* Modified the integration test for `linkerd upgrade` to test upgrading from
the latest stable release instead of the latest edge, to reflect the typical
use case
This stable release adds a number of proxy stability improvements.
To install this release, run: `curl https://run.linkerd.io/install | sh`
**Special thanks to**: @zaharidichev and @11Takanori!
**Full release notes**:
* Proxy
* Changed the proxy's routing behavior so that, when the control plane
does not resolve a destination, the proxy forwards the request with minimal
additional routing logic
* Fixed a bug in the proxy's HPACK codec that could cause requests with
very large header values to hang indefinitely
* Replaced the fixed reconnect backoff with an exponential one (thanks,
@zaharidichev!)
* Fixed an issue where requests could be held indefinitely by the load balancer
* Added a dispatch timeout that limits the amount of time a request can be
buffered in the proxy
* Removed the limit on the number of concurrently active service discovery
queries to the destination service
* Fixed an epoll notification issue that could cause excessive CPU usage
* Added the ability to disable tap by setting an env var (thanks,
@zaharidichev!)
* CLI
* Fixed `linkerd check` and `linkerd dashboard` failing when any control plane
pod is not ready, even when multiple replicas exist (as in HA mode)
* Controller
* Fixed control plane components failing on startup when the Kubernetes API
returns an `ErrGroupDiscoveryFailed`
* Proxy
* Added a dispatch timeout that limits the amount of time a request can be
buffered in the proxy
* Removed the limit on the number of concurrently active service discovery
queries to the Destination service
Special thanks to @zaharidichev for adding end to end tests for proxies with
TLS!
Signed-off-by: Eliza Weisman <eliza@buoyant.io>
* CLI
* Added a `linkerd check config` command for verifying that
`linkerd install config` was successful
* Improved the help documentation of `linkerd install` to clarify flag usage
* Added support for private Kubernetes clusters by changing the CLI to connect
to the control plane using a port-forward (thanks, @jackprice!)
* Controller
* Fixed pod creation failure when a `ResourceQuota` exists by adding a default
resource spec for the proxy-init init container
* Proxy
* Replaced the fixed reconnect backoff with an exponential one (thanks,
@zaharidichev!)
* Fixed an issue where load balancers can become stuck
* Internal
* Fixed integration tests by adding known proxy-injector log warning to tests
Signed-off-by: Alex Leong <alex@buoyant.io>
Zahari Dichev
cpretzer
Carol A. Scott
Kevin Leimkuhler
Alejandro Pedraza
Oliver Gould
Alex Leong
Eliza Weisman
Andrew Seigner
Ivan Sim
Dennis Adjei-Baah
Risha Mars
Andrew Seigner
Kevin Leimkuhler
Kevin Lingerfelt
Alejandro Pedraza