The `Overview` and `Resources` nav items were slightly out of alignment
with the other nav items.
Add paddingRight to the other nav items, to compensate for their
shrunken icons.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Adds a flag, tcp_stats to the StatSummary request, which queries prometheus for TCP stats.
This branch returns TCP stats at /api/tps-reports when this flag is true.
TCP stats are now displayed on the Resource Detail pages.
The current queried TCP stats are:
tcp_open_connections
tcp_read_bytes_total
tcp_write_bytes_total
In #2195 we introduced `linkerd endpoints` on the CLI. I would like similar
information to be on the web.
This PR adds an api endpoint at `/api/endpoints`, and introduces a new debugging
pagethat shows a table of endpoints, available at `/debug`
Up until now, the proxy-api controller service has been the sole service
that the proxy communicates with, implementing the majoriry of the API
defined in the `linkerd2-proxy-api` repo. But this is about to change:
linkerd/linkerd2-proxy-api#25 introduces a new Identity service; and
this service must be served outside of the existing proxy-api service
in the linkerd-controller deployment (so that it may run under a
distinct service account).
With this change, the "proxy-api" name becomes less descriptive. It's no
longer "the service that serves the API for the proxy," it's "the
service that serves the Destination API to the proxy." Therefore, it
seems best to bite the bullet and rename this to be the "destination"
service (i.e. because it only serves the
`io.linkerd.proxy.destination.Destination` service).
Co-authored-by: Kevin Lingerfelt <kl@buoyant.io>
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Fixes#2255.
When Kubernetes periodically pinged booksapp to perform a health check, the
lack of namespace violated the `TapLink` component's propTypes requirement.
This triggered a warning in the browser console when on the web UI Top view.
Working with @rmars, I removed the namespace requirement from propTypes and
moved the check for an empty namespace to the top of the component to avoid an
unnecessary queryString construction.
Fixes#2232
The Linkerd logo on the top left of the web UI is now wrapped in a
`react-router-dom` Link component so that clicking it redirects to `/overview`.
@rmars and I set out to replace all instances of lodash filter with native
filter in order to prevent the additional import. However, there was only one
use of _filter that could be easily replaced, since our other uses depend on
lodash's ability to handle empty variables, and the ability to filter both
objects and arrays (JS's native filter is only for arrays). Switching to native
filter in those cases would have required us to manually check the value of the
variable, set it to an empty array and/or convert it from an object to an array.
Signed-off-by: Carol Scott <carol@buoyant.io>
I noticed that #2131 was able to merge even though it contained a missing ;
which should have failed lint checks. I think the problem is that if fix is
enabled, running bin/web build fixes the issue and then the lint checks pass on
the fixed but uncommitted code.
We should avoid autofixing in environments that aren't development to avoid
merging unfixed code to master.
DaemonSet stats are not currently shown in the cli stat command, web ui
or grafana dashboard. This commit adds daemonset support for stat.
Update stat command's help message to reference daemonsets.
Update the public-api to support stats for daemonsets.
Add tests for stat summary and api.
Add daemonset get/list/watch permissions to the linkerd-controller
cluster role that's created using the install command.
Update golden expectation test files for install command
yaml manifest output.
Update web UI with daemonsets
Update navigation, overview and pages to list daemonsets and the pods
associated to them.
Add daemonset paths to server, and ui apps.
Add grafana dashboard for daemonsets; a clone of the deployment
dashboard.
Update dependencies and dockerfile hashes
Add DaemonSet support to tap and top commands
Fixes of #2006
Signed-off-by: Zak Knill <zrjknill@gmail.com>
The recent routes API changes caused the Top Routes tab to stop working, as it
wasn't looking for the changed structure of the response. This PR updates that
page to accept the new API response.
This PR also adds to fields to the Top Routes query form, so that the equivalent
of linkerd routes deploy --to deploy/authors will work in the dashboard.
As mentioned in #2006, the resource detail page currently only shows inbound/outbound traffic from resources that match the type being viewed (e.g. if we are on the page for deploy/voting, inbound/outbound traffic to a daemonset won't be shown).
This branch updates the ResourceDetail code to display traffic from more than one resource type (this applies to the Octopus Graph as well).
For things that comprise pods, e.g deployments and daemonsets, we omit showing authorities,
services and pods
This PR also updates the Metric Table to handle the display of a table of multiple different resource types.
* Simplify syntax for state variable access
* Add a warning chip if a resource isn't receiving traffic
Also add a meshed chip to the resource detail pages
* Proxy grafana requests through web service
* Fix -grafana-addr default, clarify -api-addr flag
* Fix version check in grafana dashboards
* Fix comment typo
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
Imports lodash function individually, eliminate 'import _ from lodash'
This branch replaces imports of all of lodash (import _ from 'lodash' with per
function imports e..g import _isNil from 'lodash/isNil'. This reduces the bundle
size from~520 kb to ~160kb.
I've also taken the opportunity to replace our use of lodash functions with
native js functions where it makes sense (e.g. some maps, concats, sizes).
Since we've switched to using css-in-js styling with material, we have very
little need for additional css libraries so support our ~30 lines of css. I'm
removing them in favour of a simpler configuration and inline styles.
- Adds bundle analyzer so we can see the composition of our bundle.
- Stop importing all the locales of moment.js
- Use named imports for all places we use material-ui components
- Fix a bug where, due to the controller components being relabled
linkerd-, the service mesh page wasn't showing the correct statuses.
- Fixes some eslint warnings on tests
Previously, the module assumed all linkerds were in the linkerd namespace.
Include the --linkerd-namespace flag in the query if linkerd is not in the default ns.
* Renames UNKNOWN in the tables to (default) which is less scary (#1946)
* adds a tooltip explaining what (default) is
* adds url props to the Top Routes page, so that they query can be populated by a url
* fixes a js error that occurs when switching pages
* Show the call to action if all metric rows are UNKNOWN
* Also enable creating of a new service profile by default on the Top Routes page
* Fix bug in passing down props.classes from the Navigation component
* Adjust form appearance
Now that #1921 has merged, we can query for top routes for any resource,
not just services.
This PR adds a dropdown for all resources to the Top Routes query form.
It also adds a link to the Top Routes page in the sidebar.
Add the ability to create and download a service profile from the web UI.
This form will be displayed in the call to action if no route metrics are found.
Adds the top routes metrics to the resource detail pages.
* Add a tabbed view to the resource detail page
Add the ability to query top routes from the detail tabs
* Move ConfigureProfilesMsg to its own module
[web UI] Previously, we were specifying the display order to display the cli flags in the
QueryToCliCmd module. But this order is pretty standard for each command, and
I'd like to avoid hardcoding that list everywhere.
Move the handling of order into the QueryToCliCmd module.
Previously, we were passing in "tap" as the command name for both the tap and
top forms, resulting in the equivalent CLI command always being linkerd tap
regardless of whether you were in the Tap or Top view.
Fix this to correctly pass in tap or top depending on the page.
Separates out the querying and table display of route data, so that this module
can be easily placed in other places in the UI.
Adds usability improvements to the routes query form at /routes:
- displays CLI equivalent
- adds dropdown with populated options for service / namespace
As part of this work, made TapQueryCliCmd more generic, so it can work
for other CLI commands besides tap/top.
Adds a (currently not displayed in sidebar, but available at /routes) page to
mirror the current functionality of `linkerd routes <service>`. So far, this is just a
barebones form and table, but it works.
Adds a /api/routes path and handler to the api to receive TopRoutes requests from the web.
As a result, displays better in the material UI version of the dashboard.
Also adds Success rate to data displayed on neighbour nodes.
* Rewrite octopus arm code to be more parameterized and flexible.
As a result, displays better in the material UI version of the dashboard.
* Add Success rate to data displayed on neighbour nodes
* Fix variablilty in grid spacing by fixing the max and min widths of the chart,
and by scrolling the overflow
* Center the octopus graph so it looks better at full width
* Also add padding, so that the drop shadows aren't cut off
This replaces a couple of the MaterialUI icons introduced in #1776 with
their original counterparts in Font Awesome, but wrapped in a MaterialUI
`Icon` tag. Also fix Linkerd logo padding in sidebar.
Part of #1781.
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
The popover on the src/dst column in the top and tap tables disappeared
before a use could click on it.
Modify the popovers to be reachable, also reimplement them as activated
by mouse clicks rather than mouse over events, allowing the src/dst
column to be both clickable and provide an icon for popover.
Fixes#1784
Signed-off-by: Andrew Seigner <siggy@buoyant.io>
Try to squish the metrics columns so that the data fits on the page without
having to scroll the table. This was mostly evident in the Tap and Top tables,
where a lot of the table content would be initially out of view.
This branch also includes an unrelated tiny fix for max error length, which had
been changed from 500 to 50 for testing, and had not been changed back
A container called `proxy-api` runs in the Linkerd2 controller pod. This container listens on port 8086 and serves the proxy-api but does nothing other than forward gRPC requests to the destination container which listens on port 8089.
We remove the proxy-api container altogether and change the destination container to listen on port 8086 instead of 8089. The result is that clients still use the proxy-api by connecting to `proxy-api.<ns>.svc.cluster.local:8086` but the controller has one fewer containers. This results in a simpler system that is easier to reason about.
Signed-off-by: Alex Leong <alex@buoyant.io>
* Re-add sortable column headers to tables in web UI
* Display sort icons on all sortable columns
* Disable src/dst popover in top table
Signed-off-by: Kevin Lingerfelt <kl@buoyant.io>
This branch:
- adds a "meshed" badge to the namespace overview page instead
of a green checkmark (uses Chip)
- fixes aforementioned meshed indicator not showing up in firefox
- vertically centers the ( ! ) icons in the metrics tables
- vertically centers the dots in the metrics tables
Andrew Seigner
Risha Mars
Carol A. Scott
Oliver Gould
Ivan Sim
Alejandro Pedraza
zak
Kevin Lingerfelt
Alex Leong